plastic moulding machine used for sale

x-travel: 500 mm y-travel: 500 mm z-travel: 350 mm table surface area: 800 x 450 mm spindle taper: ISO: 40 quill stroke: mm feed - longitudinal/cross: mm/min feeds vertical: mm/min turning speed range: max. 3150 U/min voltage: 380 V / 50 Hz power capacity: 4 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 5-10 mm stroke: 40 mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 2 station rotary table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 99999 mm grinding length: 99999 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m We offer the overhauling of your Kellenberger U-machine. Mail serial number and foto of the machine and you will get an offer. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Feed: -Speeds: 3000, 4500, 6000, 9000 rpm -Dimensions: 1400/800/H1480 mm -Weight: 600 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1120 rpm -Shaft mounting: Ø 30 mm -Quantity: 1 available -Dimensions: 985/290/H185 mm -Weight: 68 kg

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrically overhauled with ...

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m Overhauled with geometric KELLENBERGER protocoll -2-axis DRO -Paper filtration Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erford ...

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1720 rpm -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 910/290/H190 mm -Weight: 58 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1420 rpm -Shaft mounting: Ø 30 mm -Quantity: 1 available -Dimensions: 670/290/H190 mm -Weight: 57 kg

Thread cutter, tapping machine, tapping machine -Integrated reversing gear with fast reverse -Nominal consumption: 230 watts -Max. Cutting capacity: M6 -Connection: 230 volts -Weight: 2.3 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 2.4/3.3 kW 1720/3420 rpm at 50 Hz -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 660/290/H185 mm -Weight: 61 kg

grinding diameter: 250 mm grinding length: 1000 mm centre height: 125 mm grinding wheel diameter: 500 mm grinding wheel width: 80 (100) mm bore: 203,2 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm workpiece spindle swivable +/-: 360 ° grinding head swivellable +/-: 0 ° grinding spindle speed: U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø table swivelabel +/-: 10 ° longitudinal feed of the table: mm table speeds: 0,02-6 m/min : 130 kg max. workpiece weight -without tailstock: 130 inkl. Spannung kg cross travel: 270 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 5,5-7,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the serv ...

honing diameter: 125 mm stroke: 350 mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Two step expansion for pre and finish honing Air gauge measuring Fixture for honing a 4 cylinder block Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Geometrisch überholt und neu la ...

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1410 rpm at 50 Hz -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 660/280/H185 mm -Weight: 52 kg

x-travel: 600 mm y-travel: 350 mm z-travel: 140 mm table surface area: 700 x 300 mm spindle taper ISO: 40 spindle turning speed range: 100 - 4000 U/min distance spindle center to column: 395 mm distance spindle nose and table: min. 170 -max. 550 mm control: TNC 407 milling feeds: 3 + 2000 mm/min rapid traverse: 5000 mm/min spindle drive: 5,5 kW total power requirement: 9 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2,5 x 1,8 x 2,2 m • control HEIDENHAIN TNC 407, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 mm threading length: 20 mm turning speeds: 400 U/min working area: 500 - 1600 mm weight of the machine ca.: 25 Kg dimensions of the machine ca.: m • pneumatical thread cutting device, M3 - M12, • with 6 adapters of thread cuttings, Size 1, • control valve with lubrication, • order no. 31681, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 2.35/3.3 kW 1420/2850 rpm at 50 Hz -Shaft holder: Ø 30 mm -Dimensions: 665/290/H180 mm -Weight: 61 kg

beading machine, hand beading machine, flanging machine, seam closing machine, manual beading machine -max. sheet capacity: 1.0 mm -Projection: 200 mm -Tool holder: Ø 24 mm -Stop plate: adjustable -Dimensions: 750/700/H1500 mm -Weight: 120 kg

Threading machine, pipe thread cutter, thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -for pipe size: max. 2 inches -Cutting jaws: 1/2-2 inches -Operating voltage: 380 volts -Weight: 100 kg

sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1500 mm bending angle max.: 135 ° total power requirement: - kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 1,7 x 0,7 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm weight of the machine ca.: 6,5 t CNC Steuerung Heidenhain TNC 426 Kühlmitteleinrichtung Spänewanne CNC control Heidenhain TNC 426 coolant device chip tank Technische Daten / technical details: X-Weg / X-travel 600 mm Y-Weg / Y-travel 525 mm Z-Weg / Z-travel 500 mm Spindeldrehzahlen / spindle speed 6300 UpM /rpm Werkzeugaufnahme / spindle taper SK40 Vorschubbereich X/Y/Z / feed range 10000 mm/min. Universaltisch / clamping area of universal table 750x530 mm Gewicht der Maschine ca. / weight 6500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crane arm for forkliftWeight 220 KGApplicable lifting force: 2500 KGAload: 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.5 kW 4700 rpm at 80 Hz -Voltage: Y 400 volts -Shaft holder: Ø 32 mm -Tool -Dimensions: 645/235/H150 mm -Weight: 55 kg

tube diameter: . mm wall strength: . mm bending radius min.: . mm Control: total power requirement: kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (length / width): 4800 x 1600 x 2400 mm weight: 1500 kg Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. M ...

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Jaw height: 63 mm -Clamping depth: max. 170 mm -swivel -Dimensions: 530/330/H170 mm -Weight: 67 kg

Drilling machine Brand: Flott Type: 6STW Technical data: Drill chuck holder: B12 Drill chuck stroke: 40mm Distance from column to drilling area: 180mm Thickness of the column: 50mm Worktop: 180x260mm Motor: 0.9 kW Speed: 1250-8000 rpm Weight: approx. 20kg Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.

: 95 mm Shaft diameter: 30 mm Shaft revolutions: 7 U/min roll diameter: 132 mm Drive: 0,75 kW weight: 220 kg range L-W-H: 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 6.6 kW 8915 rpm at 300 Hz -Voltage: 165 volts -Shaft mounting: Ø 35 mm -Dimensions: 520/247/H145 mm -Weight: 41 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 5820 rpm at 100 Hz -Power: 3.7 kW 17350 rpm at 300 Hz -Voltage: 220/220 volts -Shaft holder: Ø 24 mm -Dimensions: 355/125/H210 mm -Weight: 20 kg

round material: 40 mm tube diameter: 70x2 mm square material: 80x30x3 mm L-beam: 50 x 5 mm I - beam section - flat steel: 80 x 16 mm I-beam section - upend: 50 x 15 mm roll diameter: 157 mm Shaft diameter: 50 mm bending speed: 2,95 m/min total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: 1000x950x1450 mm Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication - horizontal and vertical operation - CE mark / Declaration of Conformity - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 1 mm roll diameter: 56 mm dimensions of the machine ca.: 1600 x 700 x 1050 mm Domestic equipments: - Upper roller can be swung out manually The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine reamers, reamer, reaming tool, locating knife cutting set -Quantity: 10x reamers -Diameter: 5x Ø 35.5 mm H7 -Diameter: 5x Ø 45 mm H7 -Recording: MK -Price/Sale: only complete set -Weight: 24 kg

MIG/MAG welding machine, MIG/MAG welding machine -Max. welding power: 350 A -2-roller drive -Air-cooled -incl. ground cable -with removable wire feeder -Gas valve -Hose package: 2.8 m -Dimensions: 1100/640/H1090 mm -Weight: 190 kg

Deburring machine, hole deburrer, bore deburrer, deburring device -Drive: 0.30 kW -Countersink -Speed: 585 rpm -Dimensions: 500/300/H460 mm -Weight: 31 kg

sheet width: 2100 mm plate thickness: 13 mm pre-bending: 10 mm upper roll diameter: 230 mm lower roll diameter: 210 mm side roll diameter: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 4.620 kg dimensions of the machine ca.: 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

: 80 mm roll diameter: 260 mm : 7 U/min : 170 mm : 27 kN : 160 mm : 450 mm total power requirement: 3,7 kW dimensions: 980x1430x1600 mm weight: 1380 kg Accessories / equipment: - Three driven rollers with a smooth surface - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can bend different profiles are used e.g. Flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: R10-R260 : 210 ° bending speed: 2 U/min : 1 1/4 x 3,5 mm : einphasig - 230 V drive motor: 1,1 kW : < 70 dB weight of the machine ca.: 80 kg dimensions of the machine ca.: 410 x 1000 x 570 mm Accessories / equipment: Hard copper and aluminum: 54x2 mm Steel tube: 42x3 mm Stainless steel: 42x2.5 mm Solid material: 30 mm Number of programs: 30 each 9 bends Control: Soft-touch control panel in 8 different languages Mobile by driving device The controller allows easy programming of the automatic cycle The controller is equipped with a system diagnostics and has a great language selection. Patented fast tool change system A single bending speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,25 mm roll-body distance: 250 mm throat: 260 mm distance between roll centers: 62 mm tool adaptor: 26 mm speed: 6,3 m/min total power requirement: 0,7 kW weight: 170 kg range L-W-H: 1020x600x1500 mm Domestic equipments: - motor driven beading machine - 5 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Slotting machine vice, vice for slotting machine -Span width: 110 mm -Jaws: 225 x 45 mm -Dimensions: 270/330/H155 mm -Weight: 20 kg/piece

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Remote control -Manufacturer: unknown -Type: Poti -Number: 1x controls available -Price: per piece -Dimensions: 155/105/H130 mm -Weight: 2.7 kg

Inert gas welding machine, inert gas device, welding rectifier -without wire feed -Max. welding power: 350 A -Dimensions: 700/600/H1400 mm -Weight: 62 kg

: 48x3,5 mm : 48x2,5 mm : 32 mm : 64x2 mm bending speed: 2 U/min : R10-R300 total power requirement: 1,5 kW weight of the machine ca.: 110 kg dimensions of the machine ca.: 410x1000x570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar material - diameter: Ø 35 mm I-beam section - flat steel: 60x10 mm L-beam: 50 mm tube diameter max.: Ø 60x2 mm square material: 45x45x3 mm roll diam. toproll: 162 mm roll diam. bottom roll: 152 mm Shaft diameter: 50/40 mm turning speeds: 3,3 m/min total power requirement: 1,5 + 0,75 kW weight: 450 kg range L-W-H: 1050x950x1450 mm Domestic equipments: - hydr. Delivery of the top roller - standard roller set - side straightening rollers - Upper roll holder: 50.0 mm - Under roller diameter: 40.0 mm - Control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.