plastic moulding machine used for sale

Key data: 1600 mm, 228 , 40

Screw diameter: 40 mm Stroke volume: 251 cm³ Injection weight in polystyrene: 228 g/hp Injection pressure: 2,500 bar Clamping force: 160 t Tool installation height min.: 300 mm Opening distance: 650 mm CONTROL: MC5 Screen text: german / german Operating instructions: german / german Core pulls: 2 incl. LRX100 robot integrated, x-550mm, y-1.200mm, z-1.500mm, c-90°, 2xGripper, 2xvacuum Pump drive power: 22kW Total connected load: 37.7 kW Total weight: 8,200 kg Dimensions L x W x H: 5.0 x 1.7 x 2.2 m Payment terms: 100 % before taking over the machine, net only

Engel Victory 1050/220 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 50 mm Spraying weight: approx. 395 g Spray pressure: 2332 bar Dosing volume: 422 cc Clamping unit : Clamping force: 220 t Spar spacing: 0x0 mm Size of the clamping plates: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Operating hours: 32,609 h in automatic mode Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 4 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 12 Injection unit is wear-resistant and resistant t ...

Haitian MA1600IIS with the Hilectro V-800IS robot / hybrid machine Year of Make: 2020 Injection unit: Screw diameter: 45 mm Injection weight: 291 g Spray pressure: 1780 bar Dosing volume: 320 ccm Clamping unit : Clamping force: 160 t Spar spacing: 470x470 mm Size of the clamping plates: 700x700 mm Ejector: hydraulic Clamping unit: toggle lever Control: Keba - Touch Screen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 3 Main motor of the machine - Servo motor driven by inverter - Energy saving Central lubrication It is possible to change the screw diameter Hilectro V-800IS robot Year of Make: 2020 5-axis robot: 4 axes are driven by servo motors (electric): X, Y, Z, B (rotation) Touch control panel Robot with adapt ...

This HAITIAN MA-4700 injection moulding machine was manufactured in 2011. It offers an injection capacity of 1860 grams and a powerful injection pressure of 1850 Bar. The clamping force can reach up to 470 tons, accommodating molds with a thickness range of 320 mm to 820 mm. The distance between tie bars is 1560 mm, ensuring ample space for various mold sizes. Consider the opportunity to buy this HAITIAN MA-4700 injection moulding machine. Contact us for more information.

Used Used PET Blower Sidel 10.14 2013: Year: 2013 Condition: Good Used PET Blower Sidel: Model: SBO 10/14 Year: 2013 Speed: 7.500 BPH Rotary 10 cavities Hopper included Elevator included Orientator included Inspector included Safety protections Code: W 113 More details: https://bottlingscout.com

Used Used PET Blower Uniloy Comec ibm 42: Year: 1990 Condition: Good Used blower uniloy Comec Year: 1990 Speed: 2200 bph Model: ibm 42 Cavities: 6 Compressor: atlas copco 08 Bottles formats: 3 cl to 500 ml Preform uploader Safety protections Code: W 59 More details: https://bottlingscout.com

This Engel victory 1800/300 was manufactured in 2016. A hydraulic injection moulding machine with a 300-ton machine power, it features a screw diameter of 60 mm and supports up to 16 hot runners. Equipped with four hydraulic core pullers and a Viper 12 robot, it offers enhanced automation capabilities. Contact us for more information about this machine.

This Husky E 3150 RS 170 155 was manufactured in 1997. It features a clamping force of 31,500 kN, a screw diameter of 155 mm, and a shot weight of 9,642 g. Ideal for large-scale production, it has a stroke volume of 13,205 cm³ and an injection pressure of 1,636 bar. For more information about this machine, please reach out to us.

This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. Its equipped with a robot, ensuring efficient automation. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 650/160 tech machine we have for sale. Contact us for more information about this machine.

This Engel Victory 330/80 Tech was manufactured in 2015. It features a clamping force of 800 kN, a screw diameter of 35 mm, and a maximum injection volume of 154 cm³. The machine dimensions are 3974 x 1437 x 1932 mm, weighing 5300 kg. Currently in production with excellent condition and 37,235 operating hours. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 330/80 Tech machine we have for sale. Contact us for more information.

This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information.

This Engel VICTORY 750/180 tech was manufactured in 2015. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes. With a clamping force of 1,800 kN and a screw diameter of 50 mm, it supports a maximum injection volume of 393 cm³. Currently in production and in excellent condition, this machine also includes a robot interface EUROMAP 67. Contact us for more information about this machine.

This Engel VICTORY 1350/260 tech was manufactured in 2012. It features a clamping force of 260 tons, a maximum injection volume of 735 cm³, and a screw diameter of 60 mm. The machine dimensions are 5,861 × 1,923 × 2,300 mm, and it weighs 19,400 kg. Currently in production with excellent condition and 73,164 operating hours. Contact us for more information about this machine.

This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine.

This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine.

This Engel VICTORY 200/40 tech was manufactured in 2015. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes. With a clamping force of 40 tons and a screw diameter of 25 mm, it supports a maximum injection volume of 69 cm³. The machine includes a robot interface (Euromap 67) and is still in production, showcasing its reliability and excellent condition. Contact us for more information about this machine.

This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine.

This HAITIAN JU4500II was manufactured in 2019. It features a clamping force of 4,500 kN, a maximum injection volume of 1,239 cm³, and a screw diameter of 80 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN JU4500II machine we have for sale. Contact us for more information about this machine.

This HAITIAN JU5500III was manufactured in 2021. A hydraulic injection moulding machine with a clamping force of 4,500 kN and a maximum injection volume of 1,239 cm³. Features a screw diameter of 80 mm and an opening stroke of 1,250 mm. Equipped with a robot interface, Euromap 67, and still in production. Consider the opportunity to buy this HAITIAN JU5500III hydraulic injection moulding machine. Contact us for more information about this machine.

This HAITIAN ZE2300 was manufactured in 2019. It features a clamping force of 2300 kN, a platen opening stroke of 1150 mm, and a screw diameter of 55 mm. Equipped with a robot and Euromap 67 interface, it remains in excellent condition and is still in production. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN ZE2300 machine we have for sale. Contact us for more information.

This HAITIAN ZE1900 was manufactured in 2019. It features a clamping force of 1900 kN, a maximum injection volume of 412 cm³, and a screw diameter of 50 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the HAITIAN ZE1900 machine we have for sale. Contact us for more information about this machine.

This Arburg Allrounder 420C 1000-290 was manufactured in 2014. It features a clamping force of 1000 kN, an opening stroke of 500 mm, and a platen size of 570x570 mm. Max shot weight is 132 g. Consider the opportunity to buy this Arburg Allrounder 420C 1000-290 hydraulic injection moulding machine. Contact us for more information.

This 5s Krauss Maffei 160-750 EX was manufactured in 2015. It features a clamping force of 1600 kN and a fully electric drive system, ensuring efficient operation. The machine has a screw diameter of 45 mm and a calculated shot volume of 302 cm³, making it suitable for various injection molding applications. Consider the opportunity to buy this Krauss Maffei 160-750 EX electrical injection moulding machine. Contact us for further details.

This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details.

This DEMAG ET 330 - 1450 hydraulic injection moulding machine was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine includes a Wittmann W322-121 linear robot for enhanced automation. Consider the opportunity to buy this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details.

This Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine includes an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Consider the opportunity to buy this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details.

This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details.

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. It features a clamping force of 5000 kN and a maximum shot weight of 2084 g, making it suitable for high-quality injection molding applications. With a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine offers robust performance. Consider the opportunity to buy this Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details.

This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. Its an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information.

This Krauss Maffei 80-220 C1 was manufactured in 2001. It features a clamping force of 800kN and a mold opening force of 55kN. The machine includes a robot, although it has a vacuum malfunction. Ideal for those looking to enhance their production capabilities in injection moulding. Contact us for more information about this machine.

This Toyo Si-350-6S JH750E-PACK was manufactured in 2022. It features a clamping force of 3430 kN, screw diameter of 60 mm, and an injection speed of 300 mm/s. With a total installed power of 85.6 kW and dimensions of 8073 × 1930 × 2397 mm, it represents a robust choice for precision molding. Contact us for more information about this machine.

This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine.

This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for precision in plastic injection molding. Contact us for more information about this machine.

This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine.

This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. Its equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine.

This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine.

This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine.

This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information.

Used Used Blower Sidel PET 10/10 Four 1994: Year: 1994 Condition: Good Used Blower Sidel PET 10/10 Four 1994: Model: SB010/10 FOUR Year: 1994 Speed: 10.900 bottles/hour Preform: 1881 15 gr PCO 1881 (0.5 l) and 26.5 gr ? (1.5 l) Type: rotary Number of molds: 10 Air recovery system not in place Refrigeration unit included AIR COMPRESSOR VAN TECHNOLOGY Model: VAN-37 VSD Year: 2014 Speed: 330 m3/h 10 bar Stages: 1 screw stage ? 1 set; two sets are provided to ensure production continuity in the event of a failure of one set. The set includes a screw compressor + VAN-22 kW booster. AIR COMPRESSOR KOMNINO Model: KP-1000-11/0.8 Stages: 3 Booster 10 bar Safety protections Code: W 108 More details: https://bottlingscout.com

Used Used PET Blower Sipa Sfr 16: Year: 2007 Condition: Good Used Pet Blower Sipa Year: 2007 Speed: 24.000 bph Model: sfr 16 Stamp included: 1.5 lt 16 cavities Machine overhauled in 2019 Compressor atlas copco Booster Safety protections. Code: W 36 More details: https://bottlingscout.com

Used Used PET Blower Sidel Sbo 6: Year: 1999 Condition: Good Used PET Blower Sidel Sbo 6: Year: 1999 Speed: 7.800 bph Model: sbo 6 serie 2 Number of cavities: 6 Preform tipper sidel Hopper and preform feeder sidel Stamp not included Safety protections Code: W 85 More details: https://bottlingscout.com

Used Used PET Blower Kosme Ksb 4 L 6.800 bph: Year: 2006 Condition: Good Used PET Blower Kosme Ksb 4 L 6.800 bph: Year: 2006 Speed: 6.800 Bph Model: KSB 4 L Number of cavities: 4 Compressor not included Chiller not included Preform feeder Preform tipper Formats: Diameter Max. 110mm Length Max. 340mm Volume Max. 2.5 litri 2 Formats included: 1000 ml e 500 ml Safety protections Code: W 101 More details: https://bottlingscout.com

Used Used PET Blower Blomax 4 Krupp Corpoplast 4.500 bph: Year: 2000 Condition: Good Used PET Blower Blomax 4 Krupp Corpoplast 4.500 bph: Model: Blomax 4 Year: 2000 Speed: 4.500 BPH Type: Rotary Number of cavities: 4 (molds included) Air recovery system Safety protections Code: W 106 More details: https://bottlingscout.com

Used Used Complete PET Sidel-Krones 18.000 bph: Year: 2000 Condition: Good Used Complete PET Sidel-Krones 18.000 bph: Product: Still water Speed: 18,000 l/h 2 lt (? 92) Formats: 0.5 and 2 lt Preform tipper Manufacturer: VE.CO. Model: R 13/2 Year: 2002 Blow molding, filling and capping monoblock composed of: SIDEL SBO 16 Series 2 blower Type: rotary Number of molds: 16 (molds not included) Complete set included for Alaska neck processing Air recovery system NO CHILLER SIDEL ALSIM filler Year of manufacture: 2002 Rotation direction: counterclockwise Number of valves/taps: 63 Filling type: gravity Valve type: mechanical Pressurized cabin with filters AROL capper Number of heads: 12 Pre-threaded plastic cap: GRAVITY and HEXALITE TETHERED GME30.28 NCB PT 1.00g (we have the drawing) Distribution system: pick & place COMBI OVERHAULED IN LATE 2024 Cap elevator: Manufacturer: AROL Type: mechanica ...

1.0 St. gebr. Blow Molding Machine Manufacturer: Fischer - W. Müller Type: FMB 3-120 Year of Make: 1999 Clamping force: 120 tons Extruder Type: 120/24 WT Storage head: BFKS25 corresponds to approx. 17.75 kg The machine can hold drums of up to a size 200 liters. Video available!

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

Electrical injection moulding machine manufactured in 2017. This Negri Bossi ELE 80 features a clamping force of 800 kN and a maximum opening stroke of 515 mm. The machine offers a tie bar distance of 420 × 420 mm and a platen size of 595 × 595 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi ELE 80 machine we have for sale. Contact us for further details.