plastic moulding machine used for sale

This Ferromatik Milacron K-TEC 200 S Injection moulding machine was made in 2007 in Germany. It has a clamping force of 2000 kN and a screw diameter of 40 mm. The operating hours are at 65545h.

This Battenfeld BA 3500/1900 BK injection moulding machine was built in the year 2000. It is equipped with a Unilog 4000 control unit. The machine has a clamping force of 3500 kN. See video gallery for more impressions.

This Husky H300 RS 55/50 Injection Moulding Machine was built in the year 2013 in China and has 62707 hours. The machine has a closing force of 3000 kN and a screw diameter of 50 mm.

This Ferromatik Milacron EE 75 Injection moulding machine was made in 2003 in Germany. It has a clamping force of 750 kN and a screw diameter of 30 mm. The operating hours are at 96694h.

This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2002 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. Production hours are at 94904.

This Arburg Allrounder 320 KS 700-100 Injection moulding machine was manufactured in the year 2001 in Germany and has 3467 production hours. It is equipped with an Arburg Selogica control unit.

This Netstal SynErgy 1750-460 Injection moulding machine was made in 2001 in Switzerland. It is equipped with a Netstal control unit. The machine has a clamping force of 1750 kN.

This SANDRETTO HES 3500 injection moulding machine was built in the year 2010.

This Battenfeld VM 150/525 R1280 Unilog B6P Injection moulding machine was manufactured in the year 2015 in Austria and has 40470 production hours. It is equipped with a BATTENFELD UNILOG B6 control unit.

This HTW PCO 1810 injection mold for injection moulding machine was manufactured in the year 2018.

This HPM Hemscheid 2500-1400 Injection moulding machine was manufactured in the year 2000. The machine has a clamping force of 2500 kN and a screw diameter of 63 mm.

This SUMITOMO SHI DEMAG Ergotech 350 Concept Injection moulding machine was manufactured in the year 2003 in Germany. The machine has a clamping force of 3500 kN and a screw diameter of 60 mm.

This SUMITOMO SHI DEMAG 1300-8000 injection moulding machine was made in 2010. The machine has a clamping force of 13000 kN and a screw diameter of 110 mm. It Includes a robot MASTER MATTIC RB400CN.

This Battenfeld EcoPower180 Injection moulding machine was manufactured in the year 2012 and has less than 500 hours. It is equipped with a Battenfeld Unilog B6 control unit.

This BMB Ekw 70pi Hybrid Injection moulding machine was manufactured in the year 2015. It is equipped with a HEIDENHAIN control unit. The machine has a clamping force of 7000 kN and a screw diameter of 100 mm.

This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2017 in Austria and has 12750 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 3 units are available.

This EXTRAPLAST 140to Blow Moulding machine was manufactured in the year 2015. It is equipped with a it-AUTEC Blow Control. The machine has a clamping force of 1400 kN. See tech specs details in attached PDF (German).

This YANCED YS600 Blow Moulding Machine was manufactured in the year 2015 in Spain. The machine has a clamping force of 180 kN.

Injection molding machine Brand Negri&Bossi Nb 40 400 h - 115 year 1996 pres.idr.max 150 power kw 11 -- hz 50 -- volts 380

Battenfeld TM-5504500 Injection moulding machine Year 2007 Dimensions of plates and columns : 900 900mm Min. mould dim. / Max. Mould dim. : 400 mm /   720 mm Stroke of Opening : 860mm MOTOR  KW  /   TOTAL  KW 55kw / 75kw

BMB HC 1000-9000 HB Injection Moulding Machine 900 Ton Distance between columns : 1000 mm x 1000 mm Machine is in good condition

WELLTEC 320 T Condition: very good - Column spacing [mm] : 660x660 - Maximum plate distance [mm] : 1275 - Injection weight [g] : 707

! with defective servomotor Year of manufacture: 2013 - Injection capacity : 65 cm3 - Power supply : 50Hz - Total power : 34KW

High-speed, high-precision thermoplastic automatic machine of a hybrid” type (electricity + hydraulics) with a feedback system. Installed in 2012, never used (new) PECULIARITIES: • The injection unit uses an AC servomotor to accurately dose the material. • Maximum injection speed – 700 mm/sec. • The machine of this series is ideal for high-precision casting of products for the electrical industry, as well as for high-speed casting of thin-walled products for the packaging sector.

Installed in 2012, never used (new) The machines in this series have two modes: standard and high pressure mode. In standard mode, the machine consumes a small amount of energy and develops a high injection speed. It is suitable for making PP or ABS products. In high pressure mode, the machine increases the injection pressure to produce products from materials that require higher pressure. Equipped with these two modes, the machine can work on various products. • Wide column spacing and long clamping stroke using square slabs. Convenient for a wide variety of molds. • The injection molding machines are equipped with the new FCS2100 controller with the ability to use options such as semi-closed loop or closed loop, user-friendly graphical interface, fast fault detection, central control of Internet connection.

Installed in 2012, never used (new) The machines in this series have two modes: standard and high pressure mode. In standard mode, the machine consumes a small amount of energy and develops a high injection speed. It is suitable for making PP or ABS products. In high pressure mode, the machine increases the injection pressure to produce products from materials that require higher pressure. Equipped with these two modes, the machine can work on various products. PECULIARITIES: • Wide column spacing and long clamping stroke using square slabs. Convenient for a wide variety of molds. • The injection molding machines are equipped with the new FCS2100 controller with the ability to use options such as semi-closed loop or closed loop, user-friendly graphical interface, fast fault detection, central control of Internet connection.

Clamping unit Clamping force50 ton Opening stroke350 mm Distance between tie bars320 X 320 mm Mould height min.300 mm Mould height max.550 mm Platen size (h x v)446 X 446 mm Injection unit Screw diameter30 mm Injection volume85 cm³ Shot weight75 g Injection pressure2200 bar Measurements and weight Dimensions3,25 x 1.15 x 2,0 m Machine weight2250 kg

Used STRATOS 10E blow molding machine for the production of PET packaging with a capacity of up to 10L. SMF STRATOS 10E is adapted to the Fi38 thread. Year of production 2016. Set includes: 1. AUTOMATIC PET BOTTLE BLOWING MACHINE STRATOS 10E with a set of molds for 1 format 2. Preform feeder 3. Bottle receiver 4. Power Wizard™ 5. Air recuperation system 6. DR-310 preform basket tipper PRODUCTION DATA • Number of sockets - 2 • Maximum package diameter - 220mm • Maximum packaging height 435mm • Packaging capacity 3.0÷10.0l ELECTRICAL SYSTEM • Voltage (standard) According to PN-EN 50160 • 400V ± 5% for fast voltage changes with an averaging time of 10 ms. • 400V ± 10% for slow voltage changes with an averaging time of 10 min. • Frequency 50 ÷ 60Hz • Connections: Three phases (3P) + Neutral (N) + Protective (PE) • Control voltage 24 V/DC • Ins ...

Injection weight: 20 g Closing force: 250 kN State: Used Screw diameter: 18 Injection pressure: 2500 Column spacing: 270 x 270 Size of plates: 380x380 Min mold height: 200 Control type: Selogica Language: German Installed power: 35 Working hours: 82,985 Libra: 2100 Dimensions: 3 x 1.1 Feed hopper: NO Core String: Yes Robot socket: Yes

This Krauss Maffei 200-1000-380 CX injection moulding machine was manufactured in 2018. In excellent condition, it has logged only 3,456 operating hours. It features a screw diameter of 50 mm, total length of 650 cm, and supports an overall weight of 13,000 kg. Ideal for plastics processing, the machine we have for sale is robust and reliable. Contact us for more information about this injection moulding machine.

This Haitian HTF 450x was manufactured in 2006. It features a robust clamping force of 4500 kN and a screw diameter of 80 mm, capable of an injectable volume of 1860 cm³. The machine offers a mold opening stroke of 740 mm and operates with a pump motor power of 45 kW, ensuring efficient production cycles. Ideal for precision injection moulding, the Haitian HTF 450x machine we have for sale is designed for high performance. Contact us for more information.

This Haitian HTF 780x was manufactured in 2005. It includes a ROBOT STAR type CSE 1700 and boasts a clamping force of 7800 kN with a screw diameter of 100 mm. The injection moulding machine has a maximum injection volume of 3456 cm³ and a plasticizing capacity of 85.2 g/s, making it highly efficient for large-scale production. The Haitian HTF 780x machine we have for sale is a robust addition to any plastics processing facility. Contact us for further details.

Demag 800T hydraulic toggle press with electric metering. Screw diameter 110 Max. injection pressure: 1815 bar Injection volume: 4372 cm3 Max. mold thickness/min: 500/1050 Sold with Sepro visual robot

Year: 2008 Number of hours: H Cores: 2 Robot interface: YES Bi metal: YES

This Battenfeld TM 1600/1000 was manufactured in 2001. A robust injection moulding machine with 160 tonnes of clamping force and a screw diameter of 50 mm. It features a distance between tie bars of 520x520 mm and an opening stroke of 480 mm from the installation height. Ideal for precise and efficient production, the Battenfeld TM 1600/1000 machine we have for sale is a valuable asset for any operation. Contact us for further details.

Clamping force: 500kN, heating output: 5.4kW, connected load: 23.9kW, weight: 2.4t.

Screw diameter: 100mm, clamping force: 13.000kN, tool installation height: 600-1550mm, weight: 69t, operational hours counter: 15,460h.

Clamp force: 850kN, heating output: 8.4kW, connected load: 9kW, weight: 930kg.

Clamp force: 850kN, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.

Connected load: 17.71kW.

Connected load: 37kW.

Clamp force: 350kN, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.

Clamp force: 350kN, heating output: 4kW, connected load: 15kW, weight: 1.7t.

Mould thickness: 100-440mm.

Max. clamping force: 350kN, max. opening force: 31.1kN, distance between tie-bars: 270x270mm, weight: 1.8t.

Screw diameter: 95mm, distance between the bars: 900x800mm, max. opening path: 810mm, max. tool weight: 6.7t, operational pressure: 190bar, weight: 24t, with Industrial Robot FANUC M-16iL.

Clamping force: 270kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.

Clamping force: 500kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.

Clamping force: 1600kN, stroke volume: 215cm³, injection pressure: 2020bar, power: 15kW, weight: 5.7t, including six Temperature Control Devices SINGLE and Dry Air Dryer PIOVAN.

Ejection stroke: 35mm, weight: 700kg.