plastic moulding machine used for sale

Arburg 320 S 500-150 selogica injection molding machine with a robot Year of production: 1999 Control: Selogica TECHNICAL DATA • Closing force: 500 kN • Clearance between columns: 320 mm x 320 mm • Min form height 225 mm • Max mold height 350 mm • Board dimensions: 446 mm x 446 mm • Opening distance: 425 mm • Max distance. between plates 525 mm • Snail: 30 mm • Shot weight: 65 grams PS • Injection pressure: 2210 bar GENERAL • Engine: 15 kW • Total installed power: 21.3 kW • Dimensions: 3.2 x 1 x 1.8 • Weight: 2250 kg • German language control hours worked 45 970 h number of cycles 8 110 434 pcs Injection molding machine in production all the time As additional equipment, the injection molding machine has an original side manipulator for receiving ingots Regularly serviced, very good conditi ...

Manufacturing Number: 42552 Production Year: 1991 Closing force: 2500 kN Maximum opening stroke: 520 mm Mold height min / max: 200/525 mm Screw diameter: 57 mm Technical condition: good The machine is disconnected from the power supply (not working)

INJECTION MOULDING MACHINE DEMAG DC320 with the following characteristics: Press: 350 ton Platens : 700x700mm Capacity: 2.5kg/shot The machine is in top excellent condition with only a few months of operation time. - Condition: top excellent - Can be shown under power - Reason for sale: commercial Screw diameter: 45mm Tie bar spacing (H) & (V): 720 x 650 mm Shot volume in cm3: 360 cc Pressure on material: 2400 bar

Brand: NEGRI BOSSI Model: NB 62 Tonnage: 62 Year of issue: 7/1997 Transparency between ties: 315x315 Screw diameter: 32 Estimated shot volume: 127 Minimum / maximum mold thickness: 120-350 Core pull: 1 Euromap: 620H-220 Mov. plate travel: 130-310 Air discharge: 2

Sintesi 200 injection molding machine, complete with TRIA crusher Production - Italy. It is in working order, but the processor is faulty (partially replaced by a relay); Locking force in tons - 200 T; Flow diameter 50 mm; Dist. X between posts 530 mm Dist. Y between columns 530 mm Serving size 442 cm³ Serving weight 546 g Material pressure 2058 bar Plate length 790 mm Plate width 790 mm Bimetal screw No Equipped with robot No Robot interface si Number of heating zones 5 Press inlet 650 mm Length x width x height 6200.0 × 1430.0 × 2260.0 Weight 9000 kg

Stork S6600-5650 injection molding machine Year of production: 2011 Total installed power: 90 kW Max. injection speed: 500 mm / s Max. injection pressure: 1650 bar Screw diameter: Ø84 mm Max. shot weight for PP: 2042 g Mold closing force: 6600kN Clearance between H x V columns (↔ x ↕): 900 x 900 mm Mold height min: 300 mm Max. mold height: 900 mm Max. mold opening stroke: 940 mm Max. ejector pin height: 680 mm Centering rings diameter: 200 mm Max. ejector stroke: 300 mm Dimensions of the mold mounting plates H x V: 1370 x 1370 mm Aggregate volume: 4527g The diameter of the hole in the mouthpiece: Ø 8 mm The injection molding machine in good condition is constantly used in current production, it is possible to see it on site or send a movie with an example of operation.

Equipment Condition - Good Characteristics: - Injection code 180N - Screw pair diameter 40 mm - Execution of the screw M7 - barrier auger - Open nozzle - Vibration mounts - Standard injection speed - Pusher return control In a set: - Lithium industrial mold for the manufacture of parts M2 nozzle for the bioreactor, 4 nests. - Hot channel temperature controller, including connecting cables and 8 zone connectors - Spare socket (die and punch) for the production mold for the manufacture of the part “M2 nozzle for the bioreactor” - Dispenser volumetric LYBRA LV2 - Single phase loader S52 - Water chiller SCA1911 - Crusher model 32-20 / JM - Belt conveyor N-CPR4 additional characteristics in attachments

BMB Model MC 350 PL Year of manufacture 1994 Origin Italy Closing Unit Closing Force 3500 Kn (350T) Inner width between columns (hxv) 900x625 mm Mold opening way 700 mm Min. Mold height 200 mm Pusher distance 300 mm Pusher forward force 100 Kn Injection Unit Screw diameter 70mm L / D ratio 24 Volume 1450 Cm3 Weight (PS) 1300 g Pump power 55 kw Heater power 32.5 kw Weight ca. 16.5 t Width x Height 1850x2450 mm

FERROMATIK KTEC 110S Year of manufacture: 2003 Injection unit: 493 Screw diameter: 40 mm Screw length L / D: 20 Theoretical injection volume: 201 cm³. Maximum injection pressure: 2240 bar Max. injection rate: 570 cm³ / s Max. screw rotation speed: 260 min-1 Closing unit Clamping force : 1110 kN Min. mould thickness: 250 mm Max. opening stroke: 550 mm Max distance between platens: 800 mm Distance between tie bars: 470 x 470 mm Platen size: 690 x 690 mm General Pump motor power: 22 kW Heating power: 12.7 kW Total installed power: 31 kW Oil quantity: 290 l. Dimensions (length x width x height) : 5 x 1.6 x 2 m. Weight : 5500 Kg Visible without power Press failure, CPU problem. Option : Pressure accumulator 2 hydraulic cores 2 pneumatic valves Euromap 12

Up to a total of 3 BMB KW 38PI / 3450 machines are sold in perfect condition. Manufactured in 2003. For more information about the price contact me by whatsapp or call. Clamping force 380 T Screw diameter 75 mm Tie bar spacing (H) 1025 mm Tie bar spacing (V) 945 mm Shot volume 1725 cm³ Shot weight 1640 g Pressure on material 2000 bar Robot interface Mould size 250-750mm ------------------- Length x width x height 8405.0 × 2040.0 × 2750.0 Weight 19000 kg

Screw diameter: 40 mm Shot weight: 263.55 g Max. Injection volume: 251 cmᶟ Max. screw stroke: 200 mm Injection ratio: 198 cmᶟ / sec Closure components: Closing force: 130 t Clearance between columns: No columns Max dimensions of the table plates: 750x700 mm Ejector: hydraulic Closing system: hydraulic Control: CC 100 EBIAS 9.42 Working hours: 73276 Robot: ER-HLI 51 VC EP5

Year of production: 2004 Total installed power: 185 kW Max. injection speed: 160 mm / s Max. injection pressure: 1560 bar Screw diameter: Ø76 mm Max. shot weight for PP: 1020 g Mold closing force: 6350 kN Clearance between H x V columns (↔ x ↕): 1060 x 960 mm Mold height min: 450 mm Max. mold height: 1000 mm Max. mold opening stroke: 940 mm Max. ejector pin height: 300 mm Centering rings diameter: 160 mm Max. ejector stroke: 300 mm Form H x V clamping plates dimensions: 1500 x 1400 mm Aggregate volume: 2487 g The diameter of the hole in the mouthpiece: Ø 8 mm The injection molding machine in good condition is constantly used in current production, it is possible to see it on site or send a movie with an example of operation.

800t clamping force Battenfeld machine, year 2008 The machine was used for a project in the auto industry but the last months there is no work for this machine. Clamping force 800.0 T Screw diameter 85.0 Tie bar spacing (H) 1120.0 Tie bar spacing (V) 1020.0 Shot volume 2412.0 Shot weight 2195.0 Pressure on material 2110.0 bar Platen length 1620.0 Platen width 1530.0 Robot interface E67 Number of cores 4.0 Number of heating zones

NEGRI BOSSI NB 300 Injection unit: 1760 Screw diameter: 60 mm Screw length L / D: 23 Theoretical injectable volume: 775 cm³ Maximum injection pressure: 2040 bars Maximum injection flow: 220 cm³ / s Max screw rotation speed: 180 rpm Closure unit Closing force: 3000 kN Mini / Max mold thickness: 280 - 680 mm Opening stroke: 640 mm Passage between columns: 630 x 630 mm Platen size: 935 x 935 mm General Pump motor power: 37 kW Total installed power: 62 kW Dimensions (Length x Width x Height): 7.15 x 1.43 x 2.36 m. Weight: 11800 Kg Spare part : A new set of screws + bimetallic sheath with a diameter of 60 mm is available as a supplement.

Engel ES 1350/275 HL ST Year of production: 1999 Injection components: Screw diameter [mm]: 60 Max injection weight PS [g]: 547 Injection pressure [bar]: 1834 Closure components: Closing force [kN]: 2750 Table plates dimensions [mm]: 1050 x 900 Min / max mold height [mm]: 350/850 Ejector stroke [mm]: 380 Control: EC100 Additional equipment: Robot: Engel ER-HLI71 Hot runners - 6 items Hydraulic cores 1 pc Pneumatic cores 1 pc Dimensions: Length / width / height [m]: 7.1 × 2.9 × 2.7 Weight [t]: 19.6 The machine is still in operation and can be inspected at the companys premises. You can make a purchase only after inspecting the machine at the companys premises

Robotic - NO Control - B4 Screw diameter - 75 [mm] Specific injection pressure - 1739 [bar] Injection volume - 1657 [cm3] Injection weight - 1508 [g] Injection unit - 2800 [mm] Closing force - 4500 [T] Tool Locking System - Knee System Tool plate size - 1120 [mm] Clearance between columns - 800 [mm] Opening distance - 760 [mm] Maximum distance between plates - 1530 [mm] Ejector stroke - 250 [mm] Pump capacity - 55 [kVA] Tank heating system power - 43 [kVA] Controls and description - ENGLISH Full documentation - YES Hours worked - 76 200 Pickup date - 6 months Dimensions (length x width x height) - 8255 x 1795 x 2330 [mm] Weight - 20 400 [kg] The machine has a new cooler, hydraulic accumulators. The pump is regenerated. The machine will be available in February 2021.

Machine dimensions Length 2800mm Width 1500mm Height 3500mm Weight 4500 kg Closing system Closing type vertical; column-less Clamping force 80t Injection system Screw diameter 18 mm Max injection pressure 11.50 Pa Max injection volume 50g Additional equipment cnc control Vertical injection Pressure measurement in the mold

Closing force: 1300 kN Clearance between columns: 420 mm x 420 mm Board dimensions: 605 mm x 605 mm Mold size: min 250 mm Opening distance: 500 mm Max distance between boards: 750 mm Snail: 35 mm Injection volume: 139 cc / 127 grams PS Injection pressure: 2500 bar Motor: 22 kW Heaters: 8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weight: 4300 kg

screw diameter 55mm, max stroke volume 475 cm3, injection pressure 1179 bar, increased injection pressure 1579 bar, clamping plates 860x830mm, max mold height 700mm, max plate spacing 950mm, 146156 Mh, included in the sale and price is the manipulator ERC43/1-EA

Engel 330/90HL injection press Year 1996 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Engel 600/145 injection molding machine Year 1995 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Engel ERC 33 injection molding machine Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Engel 330/80 injection press Year 1990 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Arburg 270U 40T closing machine with quality flap 38000 pump hours Spindle D: 18mm Year 2006 Perfect condition and working. Extra: Fasti charger/dryer and two desuperheaters Immediate availability. Dr Boy 22A Machine 18000 pump hours D spindle: 22 year 2004 Perfect condition and working. They sold the two together.

Condition: Used Operating hours: ca. 5.300 Clamping force (t): 25 Mould installation height min (mm): 150 Mould installation height max (mm): 225 INJECTION UNIT: IU70 Screw diameter (mm): 22 Stroke volume (cm³): 34 Injection pressure (bar): 2000 CONTROL Selogica direct Screen language CZ / DE / EN Total installed power (kW): 24,5 Total weigh (kg): 1580

Haitian MA13000 injection moulding machine Injection size : 8230 cm3 Screw model : C-D130 Power : 214,55 Kw Distance between column : 130 cm x 130 cm , height : 135 cm Equipment in picture like loader,robot,tower are not included Power : 214,55 Kw

Key data: 2100 kN, 45 mm

warehouse no.: 502923 manufacturer: BATTENFELD type: TM 2100-750+350V controller: UNILOG B4 year of construction: 2003 clamping force: 2100 kN distance between tie-bars h x v: 570 x 570 mm size of mould plates h x v: 840 x 840 mm min. mould height: 350 mm max. mould height: 700 mm max. open daylight: 1230 mm opening stroke: 530 mm horizontal injection unit: screw diameter: 45 mm swept volume: 358 ccm injection pressure: 2116 bar 2nd vertical injection unit: screw diameter: 35 mm swept volume: 169ccm injection pressure: 2083 bar equipment included: 8x control for hotrunner screen text german CEE-socket 16A core pulling hydraulically 1x core pulling hydraulically 3x air valve 1x machine incl. water flow regulator machine without material hopper needle shut-off-nozzle Anti vibration mounts electric interface for handling units according to Euromap 12  ...

I am selling a Nissey injection molding machine made in Japan in 1989. Closing force 1610 kN Distance between columns 460x460 mm Auger diameter 50 mm Injection volume 353 cm³ Material pressure 1715 bar Installed power 32.3 kW Condition - faulty, reason - they did not find a specialist to configure the hydraulic pump control unit after replacing it with a new one. Price is negotiable

Arburg 320K-700-250 (213) General information SKU: (213) Availability: In stock Year of construction: 2004 Brand: Arburg Specifications Spray weight: 121 g Clamping force: 700 kN Stand: Used Screw diameter: 35 mm Spray pressure: 1820 bar Tie bar spacing: 320 x 320 mm Clamping plate size: 476 x 476 mm Tool installation height min.: 200 mm Control: Selogica Language: German,Polish Power: 35 kW Operating hours: 67,623 h Weight: 2350 kg Dimensions: 3.25 x 2 m Funnel: No

Key data: 500 kN, 88 g/PS, 30 mm

Clamping force:5,000 N Screw diameter:30 mm Total height:1,950 cm Total weight: 3,400 kg Spray weight: 88 g Total length: 4,500 cm Total width: 1,250 cm Displacement 98 cm³ Engine power 15 kW. Heating Capacity: 6.9 k W Ejector force: 2,540 N Ejector stroke: 100 mm Input power: 15 kW (20.39 hp) Panel width: 550 mm Panel length 320 mm Screw diameter 30 mm Displacement 98 cm³ Specific injection pressure 1450 bar Screw speed 20-480 1/MIN Heating capacity 6.9 kW Cda3icllsq Nozzle contact force 28 kN Opening travel 330 mm, Ejector travel 100 mm, Ejector force 25.4 kN Oil tank 160 L

Key data: 500 kN, 88 g/PS, 30 mm

Clamping force:5,000 N Screw diameter:30 mm Total height:1,950 cm Total weight: 3,400 kg Spray weight: 88 g Total length: 4,500 cm Total width: 1,250 cm Displacement 98 cm³ Engine power 15 kW. Heating Capacity: 6.9 k W Ejector force: 2,540 N Ejector stroke: 100 mm Input power: 15 kW (20.39 hp) Panel width: 550 mm Panel length 320 mm Screw diameter 30 mm Displacement 98 cm³ Specific injection pressure 1450 bar Screw speed 20-480 1/MIN Heating capacity 6.9 kW Nozzle contact force 28 kN Opening travel 330 mm, Ejector travel 100 mm, Ejector force 25.4 kN Oil tank 160 L

Manufacturer | manufacturer: Bekum Machine Type | machine type: BM 504 Stations | stations: Single Station | Single station Year of construction | Built: 1998 Location | location: United Kingdom | Germany Clamping force | Clamping force: 110 kN Control Type | control system: Beckhoff Extruder | Extruder: S60/24D Extrusion Head | Extrusion Head: Single Head | Single head Mold dimensions mm | mold dimensions mm (A Length / length x B Width / width x C Depth / depth): 470 / 420 / 2x130 Bottle Volume Max. | bottle volume max.: max. 12 L Screen Language | monitor language: German / English | German / English Operating hours | working hours: approx. 3000 Accessories | accesories: Conveyor belts | conveyor belts Packing table | packing table Delivery Time | Delivery time: 1 - 3 weeks | 1 - 3 weeks

Meccanoplastica Jet 55 injection/blow molding machine, 2016, very little used: 1250h of operation.

W 86 | BLOW MOULDING MACHINE SIPA YEAR: 1994 SPEED: 4.000 BPH MODEL: SF-08004 NUMBER OF CAVITIES: 4 TYPE: LINEAR PREFORM TIPPER PREFORM HOPPER BOTTLE FORMATS: 1.5 LT SAFETY PROTECTIONS

W 85 | PET BLOWER SIDEL SBO 6 YEAR: 1999 SPEED: 7.800 BPH MODEL: SBO 6 SERIE 2 NUMBER OF CAVITIES: 6 PREFORM TIPPER SIDEL HOPPER AND PREFORM FEEDER SIDEL STAMP NOT INCLUDED SAFETY PROTECTIONS

W 84 | BLOW MOULDING MACHINE SIDEL YEAR: 1998 SPEED: 7.200 BPH SUL 1.5 L MODEL: SBO 6/10 SERIE 1 NUMBER OF CAVITIES: 6 BOTTLE NECK FORMAT 29/25 MM PREFORM ELEVATOR/ORIENTATOR STAMP NOT INCLUDED WORKED HOURS: 47.000 SAFETY PROTECTIONS

W 82 | BLOW MOULDING KRUPP CORPOPLAST YEAR: 2000 SPEED: 24.000 BPH MODEL: BLOMAX 16 16 CAVITIES PREFORM FEEDER

W 70 | BLOWER KRONES CONTIFORM S20 YEAR: 2003 SPEED: 30.000 BPH 20 CAVITIES STAMP NOT INCLUDED CHILLER INCLUDED HOPPER/ELEVATOR INCLUDED PREFORM TURNER NOT INLUDED SAFETY PROTECTIONS

SANDRETTO Micro 40T E injection molding machine SANDRETTO micro 40T E247 Version 2 GEFRAN Euromap 12 robot interface 4-way water box Socket table

Used Negri Bossi NB 62 Injection moulding machine Year: 1998

Machine: BILLION 50T H310 YEAR 2000 Year: 2000 Type of control : Number of hours: 30 600 H Closing Closing force: 50T

Injection moulding machine Manufacturer: Engel Model: ES 330 HL Year of manufacture: 2000 Capacity: 90 Tn Working hours: 50290 h

INJECTION UNIT Screw diameter: 30 mm Calculated injection volume: 98 cm³ Pressure on the material: 1450 bars CLOSING UNIT Mold thickness Mini / Max: 190/330 mm

Manufacturer : Arburg Model: ALLROUNDER 520C 2000/350 Closing force: 200T Bi-material Year of manufacture: 12/2000

Year of manufacture: 2007 Control Type: CC100 Number of hours: 39600 h Closing force: 50 T Distance between columns: 500 mm x 450 mm Injection volume: 69 cm3 Injection pressure: 2400 bar

ENGEL 800 T injection press + ENGEL robot + Magnetic plates REF: 5550/800 Screw diameter: 105 mm L/D ratio: 20 Maximum material pressure: 1600 bars Injectable volume: 3720 cm3 Lamination: 183 g/s Dosing stroke: 430 mm

Closing force: 100 T Opening stroke: 500 mm Between columns: 420 x 420 mm Tray dimensions: 600 mm X 600 mm Mini/maxi mould: 250 mm Max gap between trays: 750 mm

Screw diameter: 35 mm Screw length: 20D cm3: 168 Bars: 2640 Between columns: 470 x 470 mm Tray dimensions: 670 mm Mini/maxi mould: 250 mm Max gap between trays: 580 mm Motor power: 22 kW Heating power: 11 kw

Closing force: 110 T Opening stroke: 500 mm Between columns: 790 mm x 680 mm Tray dimensions: 790 mm x 680 mm Mini/maxi mould: 300mm Max gap between trays: 800 mm Motor power: 18.5 kW Heating power: 7.4kw

Control Type: CC200 Screw length: 20D Closing force: 40 T Opening stroke: 400 mm Between columns: 500 mm x 450 mm Tray dimensions: 500 mm x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm