138,257 used machines on RESALE, but how to find them? Machine Search
80 Volts; including pallet; Auction-ID: A1-44050-113
Rheon Cornucopia Type: KN200 Pieces of dough: 10-300 gr. Capacity : 10-60 pieces/min digital control Stainless steel cladding rollable on castors Height: 160cm Width: 80cm Depth: 150cm
Used machine in top condition Edge milling machine for simultaneous upper and lower flush milling of protruding edges such as PVC, ABS, melamine and real wood veneer. Milling of the edge can be carried out on square, round, curved, workpieces with outer and inner radius. The machine is the ideal complement to the edge banding machine B 56, B 560. The two vertically operating HF flush milling motors, 18000 rpm, are equipped with indexable insert knives (R=2 mm). With driving equipment. Pull-out support at the front. Pneumatic excavation. Control panel position : top Total connection: 2 kW Working height or feed table height : 850 mm Workpiece thickness (radius milling): approx. 16-55 mm Workpiece width min. approx. 30 mm Edge thickness: 0.4-3.0mm Inner wheels min. approx. 50 mm Weight approx. : 155 kg Dimensions : approx. 1000 x 750 mm
A vertical form fill and seal packaging machine Goglio for bulk materials including a vibrating chute scale with two chutes is available. Weighing range min./max.: 300g/3000g, accuracy: +/-0.3%, load cell type: HBM PW2 C3/18, max. load: 18kg, scale type: GL 111, packaging dimensions for 1000g: 130mm/80mm/400mm. Machine dimensions X/Y/Z: approx. 2300mm/3000mm/3500mm, weight: approx. 2800kg, control: IBM 7542 industrial computer. The machine is defective. Documentation available. An on-site inspection is possible.
sheet width: 750 mm plate length: 1250 mm plate thickness: 4 mm table surface area: 1600 x 1050 mm no. of strokes: 180 Hub/min max. punching diameter: 105 mm punching pressure: 25 t total power requirement: 4,0 kW weight of the machine ca.: 1,8 t dimensions: 1,9 x 1,9 x 1,7 m Punching and nibbling machine - Digital readout for X and Y axis - Tool cabinet with tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg
KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (May 2022) with only 1296 laser hours 2400 dpi Z-Speed Panel counter: 258861 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from right to left with Prinergy TIFF Shooter Dell PowerEdge 7330 Plate development machine built in 206 Year of Make: 2006
Auction-ID: A1-41951-142
KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (08/2022) with only 2615 laser hours 2400 dpi Z-Speed Panel counter: 395443 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from left to right with Prinergy TIFF Shooter Year of Make: 2016 New TH 7 laser (08/2022) with only 2615 laser hours
A continuous Schur flow pack machine is available. Output rate: 30m/min, max. packaging capacity: 80bags/min, min. bag dimensions X/Y: 100mm/100mm, max. bag dimensions X/Y: 450mm/500mm, bag material: PE/CPP/films/laminates, material thickness range: 0.04mm-0.14mm. Weight: approx. 650kg, control system: Siemens Simatic PLC S7-300, operating hours: 256h. Documentation available. An on-site inspection is possible.
Length of the tines approx. 100cm Diameter of the mounting ring approx. 45mm Auction-ID: A1-50501-30
Extendable forks Auction-ID: A1-41951-58
This is a LITTLE GEM glass bottle filler for 1 Pint milk bottles round format. The machine cuts and applies with heat sealing the aluminium cap that is done via a fords cutter and capper. This machine can do 1pint and 2 pints. The machine has been running until 2025 and can be sold either as is working condition or fully refurbished . The machine is driven by 1 single motor that is located at the bottom of the machine turning two gears one opposite to the other making this a very robust and easy to maintain system., Capacity: 2000 bottles per hour , Aluminium Cutting: Fords systems , Format: 1 Pint Milk Bottles , Sealing Device: Included , Construction: Fully Stainless steel on product connection Parts , Filling Type: Mechanical valves that the bottles lifts the rubbers up and the milk flows through, one the mechanical vacuum is activated this helps to avoid over, Collection Table: Inclu ...
Fork connector, 4 valves Auction-ID: A1-41951-94
maximum number of results exceeded
please refine your search
250 € 
