138,283 used machines on RESALE, but how to find them? Machine Search
HAS BEEN STATIONARY SINCE 2007 DOES NOT START ALL PAPERS COMPLETE Auction-ID: A3-46164-10022
weight max. in kg: 5.500 kg Number of working hours: 2739 h weight of the machine ca.: 8,59 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The car starts and drives without any problems. Documents available, see photos for details. Auction-ID: A3-46164-4918
Suspended mast, suspended seat, full LED work lights, battery broken Auction-ID: A3-46126-560
Number of working hours: 2462 h weight max.: 8,5 t weight: 12,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 400 mm workpiece length: 8000 / 9700 mm number of blows: 4 Forging power: 3600 (4x 900) kN no. of strokes: 270 Hub/min length: Hammer 610 mm Material Inlet Diameter: round: 400/ Square 320 mm Control: GFM CNC total power requirement: 1600 kW weight of the machine ca.: 493 t dimensions of the machine ca.: 44 x 20,5 m The line was mechanically overhauled in 1991 with an increase in forging force to 900 tonnes/hammer and a new CNC control system - CNC control GFM CNC - Forging machine SX-40 - 2 manipulators with beds -- Manipulator A - stroke: 7140mm -- Manipulator B - stroke: 9940mm -- Maximum diameter in the manipulator: 400 mm -- High travelling speed of the manipulator: 500 mm/sec. -- Feed speed of the manipulator: 10 - 200 mm/sec. infinitely variable - Loading/unloading: -- Loader: max. load capacity: 2500 kg --- max. workpiece length: 3000 mm --- Minimum workpiece length: 15 ...
The car starts, drives and turns smoothly. Everything is fine. Auction-ID: A3-46164-6125
diameter: 130 mm workpiece length: 4000 mm number of blows: 4 Forging power: 1600 per Hammer kN no. of strokes: 620 Hub/min length: Hammer 270 mm Material Inlet Diameter: round: 130 / Square 115 mm total power requirement: 280 kW weight of the machine ca.: t dimensions of the machine ca.: 24,7 x 16 m The line is complete with: - Forging Machine SX-13 - 2 (two) Manipulators with Beds -- Max. diam. in the Manipulator: 130 mm -- Manipulator torque force: 3 kN -- Manipulator high travel speed: 500 mm/sec. -- Manipulator feeding speed: 15 - 200 mm/sec. infinitely variable - Loading / Unloading Devices -- Bar Loader: max. load capacity: 300 kg -- max. work piece length: 2.100 mm -- min. work piece length: 00 mm -- Bar Unloader: max. load capacity: 300 kg -- max. work piece length: 4.000 mm -- min. work piece length: 500 mm - Electrics with Controls and Pulpits - Hydraulics and Pneumatics Curre ...
Number of working hours: 2633 h weight max.: 8 t weight of the machine ca.: 13280 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 8 t Number of working hours: 2633 h height of stroke: 3750 mm weight of the machine ca.: 11600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Forklift crane arm STABAU type KR 15Fabr. No. 003-14276 Year of construction 1986Nominal load capacity 1500 kgLoad capacity at 450 mm Radius 1500 kgLoad capacity at 750 mm Radius 1100 kgLoad capacity at 1200 mm Radius 750 kgSuitable for fork carriage FEM 2 = 403 mmLoad hook adjustable in 6 stepsTotal height of the crane arm 1350 mmBoom profile 110 x 110 mmon mobile transport rackGood condition; used
Tipping containers, tipping containers for forklift trucksChip buckets - dump buckets - folding containersLoad capacity: approx. 1000 kgVolume: 1 m³Entry bracket: 230 x 110 mmTine spacing inside: 160 mmTine spacing outside: max. 600 mm- Entry pockets for forks - Entry bracket for transport and emptying by forklift or pedestrian stacker- Manual tilting device via hand lever- 4 pieces of plastic fixed castors 175 and, 2 pieces of steerable- foldable trailing drawbarWeight: 220 kgLength: 1700 mmWidth: 1060 mmHeight: 1500 mmvery
Electrohydraulic Scissor Fork StackerScissor Pallet Truck, Pallet Pallet TruckTOYOTA / BT Type HTH 10 EFabr. No. 481795 year of manufacture 2005Lifting capacity 1000 kgLifting height max. 800 mmOverall height drained 85 mmFork length 1190 mm- Electric stroke via 12 volts Battery operated- Manual stroke via hand lever as on the pallet truck- TOYOTA Industrial Equipment Europe SARL (Made in France)- Long-stroke hydraulic cylinder- with single roller- Integrated charger (mains voltage 230 Volts, with IEC plug)Net weight 140
Electronic crane scale MWT type 142Fabr. No.: 142571 year of construction 1993Tensile force meter, crane scaleMeasuring range: 2,500 to 80,000 kgSmallest measured value: 20 kgPower supply via 12 volts Cordless suspension shackle for double hooks, anchor hook operation, storage of the measured values and tare via remote control- Memory for measured values (weights)- Printer for measured valuesVery solid and high-quality body made of steelWeight: approx. 200 kg; used
Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier, charger for scrubber-dryer -Manufacturer: FDK, charger type E230 G24/10 B-FDK -Input voltage: 230 V 50 Hz -Power: 24 V/10 A -Dimensions: 430/255/H215 mm -Weight: 12.4 kg
Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier, charger for scrubber-dryer -Manufacturer: FDK, charger type E230 G24/40 B-FDK -Input voltage: 230 V 50 Hz -Power: 24 V/40 A -Dimensions: 510/370/H395 mm -Weight: 31.2 kg
Various size; steel rim; without pallet; Auction-ID: A1-44050-306
Ford 3000 2WD diesel tractor – 1969 – 7,419 hours – hydraulic top link – Dutch registration Specifications: Brand: Ford Type: 3000 Year of construction: 1969 Date of first admission: 30-06-1969 Hours: approx. 7,418.8 hours, read Fuel: diesel Engine: 3-cylinder water-cooled diesel engine Displacement: approx. 2.9 litres Engine power: approx. 47 hp / 35 kW Drive: 2WD / rear wheel drive Transmission: 8-speed manual Dual Range transmission Forward gears: 8 Reverse gears: 2 Transition groups: high and low group PTO: 540 rpm rear PTO Hydraulic system: open-center Rear tires: 12.4-32 Length: approx. 3,220 mm Width: approx. 1,620 mm, depending on track width and tyres Height to bonnet: approx. 1,370 mm Height to outlet: approx. 2,100 mm Features: 3-point linkage Rear PTO Additional hydraulic valve block 2 hydraulic control levers Rear hydraulic connectio ...
Title: Ford 7840 Powerstar SLE 4WD Farm Tractor General specifications: Brand: Ford Model: 7840 Version: Powerstar SLE Vehicle type: agricultural tractor Fuel: diesel Drive: four-wheel drive (4WD) Closed cab Color: blue Maximum speed according to cab designation: 40 km/h Engine: Ford GA 401 CID Engine 6-cylinder diesel engine Engine without turbo Displacement: approx. 6,585 cc Rated output: 74 kW / approx. 101 hp Maximum torque: approx. 378 Nm at 1,197 rpm Liquid-cooled Fuel tank: approx. 227 litres Transmission: SLE transmission 16 forward and 16 reverse gears Four-stage powershift/load shift Synchronized group switching Synchronized reversing Electro-hydraulically operated all-wheel drive Electro-hydraulic differential lock Hydraulics and Linkage: Three-point rear linkage, category 2 Electronically controlled rear linkage Top link Height-adjustable towbar Four double-acting hyd ...
Electric walking forklift, ride-on pedestrian stacker STILL type EGV 14Fabr. No. 330221900092 year of construction 2009Nominal load capacity 1400 kgLifting height 5475 mmFork length 1160 mmTotal length 1930 mmTotal width 860 mmOverall height 2330 mmOperating voltage 24 volt- Triplex mast with 1830 mm Free lift- 689.3 operating hours read- Battery from year of construction 08/2008, type 3 PZS 315 (24Volt / 315Ah)- Automatic charger- New TÜV test UVV (surcharge 150,-- EUR net)Weight 1440 kgGood condition, battery bad. Surcharge
Electric Forklift JUNGHEINRICH Type EFG-V20 MFGE115-450 DZFabr. No. 89.90.74.09 Year of construction approx. 2000Nominal load capacity 1900 kgLifting height 4500 mmFork length 1130 mmFork carriage width 980 mmOverall height 2000 mmOperating voltage 48 volt- triplex mast with full free lift 1400 mm- hydraulic sideshift battery from year of construction 2006 Type 6 EPZS 750 (48 Volt/ 750 Ah) - battery in poor condition- 4-wheel solid rubber - tires, front 200/50-10, rear rear 16x6-8- Hydr. Auxiliary steering- automatic charger Jungheinrich,
Bosch Angle Head Cabinet Tool You are buying a high-quality winding head cabinet machine for anchor production. The area of application mainly concerns anchor production. Manufacturing/production/operating documents are included with the machine. Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!
A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Bag dimensions X/Y: 220mm/340mm, packaging capacity: 55 bags/min, operating hours: 35554h. Documentation available. An on-site inspection is possible.
A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Packaging capacity: 80 bags/min, bag dimensions X/Y: 250mm/350mm, max. film roll width: 530mm, machine dimensions X/Y/Z: approx. 2000mm/1450mm/1850mm, weight: approx. 1200kg, operating hours: 14607h. Documentation available. An on-site inspection is possible.
From a current exploitation we offer you an xyz. Year of construction: 2024 Condition: young used Original price: 622.500,00 EUR Equipment / accessories / other information: NIR Plus Package QUANTIMETER Yield Measurement Activation NIR Ingredient Determination Corn Cutting length adjustment, automatic Near-infrared sensor (NIR) for PREMIUM LINE Wizard Package Variable attachment drive incl. preparation DIRECT DISC Discharge manifold lighting LED, synchr. schwenkb. w. manifold flap Steering angle sensor Dynamic steering CEMOS AUTO PERFORMANCE Camera system, prepared AUTO FILL trolley filling system with CEBIS display GPS PILOT Ready Digital Package II - CEMIS Machine connect license SAT 900 GNSS receiver SAT 900 GNSS Receiver - SATCOR 15 Networked Documentation License 50 Years of JAGUAR Gutfluss XL PREMIUM LINE professional Counter Blade Universal PREMIUM LINE ...
Delivers 230 and 400 Volt voltage, power 6500 Watt. Auction-ID: A1-49862-14
On offer is a STILL RX20-18 electric forklift from 2018. This modern electric forklift is known for its compact dimensions, high manoeuvrability and low running costs. This makes the machine ideal for work in warehouses, distribution centers, production companies and logistics environments where emission-free work is desired. The forklift has a nominal lifting capacity of 1,800 kg and is driven by a powerful 13 kW electric motor. The machine is equipped with a 48 Volt GNB traction battery with a capacity of 625 Ah, allowing for prolonged work between charges. The comfortable, fully enclosed cab provides weather protection and ensures a pleasant working environment. Thanks to its compact construction and precise electric steering, the forklift is very suitable for work in narrow aisles and indoor spaces. The machine is equipped with a completely free lifting mast, welding rack and fork ...
maximum number of results exceeded
please refine your search
200 € 
