plastic molde for used for sale

Mosca strapping machine, ROM Fusion, year 2017, arch size 50 x 60 cm, 5 mm PP strap, good running condition

In need of repair - temperature controller defective! Single Head Welding Machine Technical data: heated blades, welding bead limitation 0.2 mm, optimisation of the welding result by means of parallel thrust welding processes, individual setting of the welding parameters, quick change of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/stroke, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, mains voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg.

This 3D printer was manufactured in 2016. The 3DSYSTEMS ProJet 2500 Plus offers high-definition printing modes, HD and UHD, with resolutions up to 1600x900x790 DPI. It supports a substantial print volume and has a robust frame size of 1397x927x1314mm, weighing 325kg. Ideal for detailed and precise printing tasks, the 3DSYSTEMS ProJet 2500 Plus machine we have for sale is a reliable choice for professional use. Contact us for more information.

This 3-axis Stratasys Objet260 Connex 3 was manufactured in 2017. It features PolyJet multi-material 3D printing technology and has a material capacity of 8 slots, including 6 model slots and 2 support slots. The machine is equipped with an external material cabinet and is certified with CE, FCC, and EAC markings. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys Objet260 Connex 3 machine we have for sale. Contact us for further details.

Key data: 1400 kN, 139 g/PS, 35 mm

1.0 St. gebr. Injection Molding Machine with Robot, Machine comes from cleanroom production Manufacturer: ENGEL Type: VICTORY 330/140 TECH Year of Make: 2011 Clamping force: 140 tons Spar spacing: SPARLESS Screws DN: 35 mm Max. displacement: 154 ccm³ Moulded part weight 139 g/hp Control: CC200 Equipment: -Robot, manufacturer: Engel, type: V12 -2 x Core Pull -Blow-out valve -16 hot runner control zones -Protective fence -Conveyor belt

Year: 2006 - technically efficient, ready to work – after full service - flash limit: 2 mm - angle range: 30-180 degrees - large heater - side supports - air preparation station

Key data: 500 kN

Clamping force: 500 kN Clamping plate: 540 x 540 mm Tool opening travel: 350 mm Tool installation height min.: 200 mm Opening width: 500 mm Ejector stroke: 100 mm Total weight: approx. 2,300kg

Injection moulding machine Battenfeld BK T 2500 BJ 1991

Technical data: heated blades, welding bead limitation 0.2 mm, optimisation of the welding result by means of parallel thrust welding processes, individual setting of the welding parameters, quick change of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/stroke, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, mains voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg.

Double mitre saw Haffner DGS 1873400 for PVC profile blanks Technical data: Built in 1994 Diameter of the saw blades mm 500 2 motors per Kw 2.2 - speed 2800 Cutting length max mm 3400 Cutting length min mm 230 Cutting depth approx. mm 150 Swivel range 45-90 degrees Hydropneumatic saw feed Pneumatic workpiece clamping Control panel with double buttons 2 suction nozzles diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Glazing bead saw: Sawing Units 1 Length of scanning rod 1,500 mm and 3,000 mm Cutting length max 90 mm Diameter saw blade 175 mm Cutting height 25 mm Support length 1,500 mm Main motor 0.5 kW Saw blades fixed 45° For plastics Pneumatic clamps Saw feed manual

Glazing bead saw manufactured in 2024. This ROTOX GLA 401 features simultaneous cutting of 4 glazing beads at 45° and milling of fixing holes. It includes pneumatic material clamping and an electric locking machine cover for enhanced safety. The machine accommodates PVC profiles with a maximum section of 375 × 45 mm and offers a cutting length of up to 260 mm with a length stop. If you are looking to get high-quality cutting capabilities, consider the ROTOX GLA 401 machine we have for sale. Contact us for further details.

Year: 2015 - technically efficient, ready to work – after full service - two pneumatically tiltable beams (retaining and pressing) - through-feed - adjustable height: 500 mm (liftable) - adjustable vertical angle from 0 to 7 degrees - working width: 3500 mm

System for filling yoghurt and quark into round plastic buckets of various sizes and for labelling them with self-adhesive shrink labels. The system consists of a separate filling/capping unit and a labeller. Filler/capper: The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam via a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place. Labeller: Continuous labelling machine for self-adhesive sleeve labels. Suitable for various bucket sizes with a capacity of 1–5 kg., Capacity filler/capper appr.: 450 units/h Based on a 6-litre bucket; depends on con ...

Year: 2014 - technically efficient, ready to work – after full service - motor: 2 x 0.75 kW - pneumatic clamping of the strips - discs with undercutting cutters (2 x 250 mm, 2 x 150 mm) - glass simulator – lateral strip support – stepless (adjustable with a crank and counter) adjustment of the simulator position - manual height adjustment of the work table

Technical Specifications & Performance Data This plastic mushroom cork capping machine is engineered for precise, repeatable application of plastic mushroom cork closures on glass bottles. Manufactured by Bertolaso, it is suitable for integration into a used bottling line and supports second hand industrial packaging operations focused on beverage production. The machine features a Siemens SIMATIC HMI touch interface for streamlined operation and clear status visualization. Manufacturer: Bertolaso Machine type: Capping machine for plastic mushroom corks Closure compatibility: Plastic mushroom cork Container handling: Glass bottles HMI: Siemens SIMATIC HMI, touch panel On-screen functions: Menu, Manual, Speed, Production, Dosing, Alarm reset Operator controls: Emergency stop and illuminated status indicators Advanced Automation & Control Systems The capper is equipped with a modern automa ...

Used Capping Machine Zalkin CA8/360 NG for plastic screw capsTechnical Specifications & Performance DataThe Zalkin CA8/360 NG is a rotary capping machine engineered for high-speed beverage production and industrial packaging. Configured for plastic screw caps, it delivers reliable torque control and repeatable closure quality for PET bottles.Manufacturer / Model: Zalkin CA8/360 NGYear: 2006Category: Capping Machine (rotary)Production Speed: up to 16,000 bottles/hourNo. of Capping Heads: 8Cap Type: Plastic screw capsCap Size / Finish: 28 mm, 1810 finishBottle Format: 0.75 LContainer Types: PETElectrical: 240 V, 50 ADimensions (W x L x H): 1200 x 1400 x 2300 mmWeight: approx. 2500 kgIncluded: Safety features, manuals availableAdvanced Automation & Control SystemsDesigned for demanding lines, the CA8/360 NG provides precise cap application and consistent torque across all eight heads. An in ...

Used Palletizer ACMI RASAR P180 2200 plastic crates – hour General Features of the Automatic Palletizer The Used Palletizer ACMI RASAR P180 2200 plastic crates – hour is a conventional automatic low-level palletizer designed to optimize end-of-line operations in high-speed bottling processes. Specifically, the Italian manufacturer ACMI built this model in 2007. As a result, it delivers a nominal capacity of 2200 plastic crates/hour, which ensures high productivity. In particular, it suits bottling lines that handle 1-liter formats in both glass and PET. Moreover, the system prioritizes reliability and speed in demanding industrial settings. Compatibility with Bottle Crates and Pallets The Used Palletizer ACMI RASAR P180 2200 plastic crates – hour efficiently handles crates containing 12 glass bottles. Consequently, it proves ideal for beverage production environments where crate-ba ...

Used Automatic Depalletizer ACMI 2200 plastic crates/hour The Used Automatic Depalletizer ACMI 2200 plastic crates/hour, model Rasar D180, operates as a fully automatic system for bottom-feed depalletizing of 1-liter glass bottles packed in 12-bottle plastic crates. Specifically designed for high-speed bottling lines, the system processes up to 2200 boxes per hour. Moreover, its modular frame allows seamless integration into existing production lines. Although it is currently dismantled and in storage, the unit remains in full working condition, ready for reinstallation. Depalletizing Structure and Operating Mode The Used Automatic Depalletizer ACMI 2200 plastic crates/hour utilizes a conventional automatic vertical structure to handle pallet loading from below. This configuration, therefore, ensures optimal stability and precision during the handling of glass containers. In addition, th ...

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 550 x 430 mm Condition: second-hand, Specification: Horizontal injection moulding machine Injection unit: - Screw diameter: 35 mm - Screw length L/D: 17.3D - Dosing stroke: 140 mm - Screw speed: 20 – 480 rpm - Moulding volume: 135 cm³ - Injection pressure: 1,065 bar - Increased injection pressure: 1,620 bar - Heating power: 6.8 kW - Number of heating zones (including nozzle): 4 Clamping unit: - Maximum clamping force: 450 kN - Platen dimensions: 550 x 330 mm - Extended clamping plates: 550 x 430 mm - Minimum mould installation height: 180 mm - Maximum plate spacing: 530 mm - Opening stroke: 350 mm - Control system: EC 100 Drive: - Pump drive power: 11 kW - Approx. weight: 3,300 kg - Dimensions: 3,300 x 1,200 x 1,800 mm Current oper ...

clamping force: 4.000 kN injection volume: 2480 cm³ screw diameter: 90 mm platen size: 1.300 x 1.080 mm Condition: second-hand, Specification: Horizontal injection moulding machine Injection unit: - Screw diameter: 90 mm - Injection volume: 2,480 cm³ - Maximum shot weight: 2,232 g - Injection pressure: 1,360 bar - Increased injection pressure: 1,600 bar - Heating capacity: 64 kW Clamping unit: - Max. clamping force: 4,000 kN - Clamping plates: 1,300 x 740 mm - Extended clamping plates: 1,300 x 1,080 mm - Minimum mould installation height: 350 mm - Maximum platen spacing: 1,300 mm - Opening stroke: 950 mm - Core pull unit: 2-stage on BAP - Control system: EC 100 Drive: - Pump drive power: 55 kW - Weight (clamping side) approx.: 25,000 kg - Weight on injection side (approx.): 8,000 kg Discharge  ...

used Arburg 520C 2000-675, built in 2000 for sale: Machine cycles = 3.6802.856 Pump hours = 46,142 Operating hours automatic = 37,814 Screw diameter = 60 mm Machine with safety fence and with used auxiliary unit, but without conveyor, without hopper and without handling. The machine is currently still connected, a visit would be possible at short notice.

This 3-axis HAGE 3D Precision One was manufactured in 2023. It features a generous build volume of 500 × 700 × 800 mm and a maximum printing temperature of up to 450 °C. The printer is equipped with a heated build chamber and print bed, ensuring optimal conditions for high-temperature plastics. If you are looking to get high-quality 3D printing capabilities, consider the HAGE 3D Precision One industrial FDM/FFF 3D printer we have for sale. Contact us for further details.

2-SHAFT SHREDDER 1.250 mm.90 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.250 mm long shafts, 13-15 tpm Shredding chamber :1.250 x 900 mm, Electric motors 2 x 45kw (or bespoke to project), planetary gearboxes, grease lubrication, inverter for reverse movement on pre-settable threshold, n.12 knives in sturdy steel, 100 mm.thick, 2 hooks (for plastics, ...

Year: 2014 - technically efficient, ready to work – after full service - working dimensions: 2750 x 1300 mm - tilting stop pins - pneumatically tilted - sliding/brush strips

Key data: 4200 kN, 527 g/PS, 70 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: KRAUSS MAFFEI Type: KM420-1900C2 Year of Make: 2006 Clamping force: 420 tons Spar spacing 800 x 800 mm Screws DN: 70 mm Max. displacement: 1,047 cm³ Moulded part weight: 853 g/hp Control: MC5 Equipment: 2 pcs core train Robot SEPRO, type: SR4030 S3 VISUAL 12-way hot zone channel control Interface temperature control unit

Year: 2006 - technically efficient, ready to work – after full service - screwdriver - automatic screw feeding system - tilting table top - fittings punch (straight cut)

- technically efficient, ready to work – after full service - adjustable leg height - working length: 3500 mm - roller width: 240 mm

Year: 2014 - technically efficient, ready to work – after full service - working dimensions: 2750 x 1300 mm - tilting stop pins - pneumatically tilted - sliding/brush strips

A complete central plastic granulate drying and conveying system Werner Koch, which was extensively expanded and modernized in 2021, is available. 1) Koch CKT 300 dry air dryer, year of manufacture: 2003, power: 41kW, air capacity: 300m³/h. 2) Koch CKT 500 dry air dryer, year of manufacture: 2021, power: 51kW, air capacity: 500m³/h, control system: Siemens S7. 3) 26x drying hoppers, volume: 11x40l, volume: 13x100l, volume: 2x150l. 4) 38x machine hoppers. 5) 2x Busch vacuum pumps. 6) Automatic Koch Navigator material distribution system, inputs: 26, outputs: 38. Including control cabinets and a central visualization and monitoring system Supervisione 9-7000. Documentation available. An on-site inspection is possible.

- technically efficient, ready to work – after full service - adjustable leg height - working length: 3500 mm - roller width: 240 mm - measurement reading scale - manually adjustable stop + locking lever

Engel 3 ES 7050 / 1 500 Duo built in 1999 against bid.

Injection moulding machine Ferromatik Elektra 50-300 selection BJ 2008 Injection Molding Machine Ferromatik Basetec 85-493-520 BJ 2009 Injection moulding machine Ferromatik Elektra 1100-450 evol. Year of manufacture 2006 Injection moulding machine Ferromatik K 110s-2F BJ 1999 Injection moulding machine Ferromatik K 125s/2F BJ 1995 Injection moulding machine Ferromatik K 200s-2F -493 BJ 1999 Angel Priam Bito Leo Locative Hot runner regulator Gammaflux G 24 Conveyor belts Temperature control units Accessories Walther Couplings

2x Powered Plastic Link Conveyors Approximate Length 7000mm Metal frame with blue plastic belt Auction-ID: A1-48805-23

Elevated Waste Plastic Transfer Powered Conveyor Approximate length 15-20 meters Auction-ID: A1-48805-76

clamping force: 600 kN injection volume: 106 cm³ screw diameter: 30 mm platen size: 590 x 600 mm Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in ...

clamping force: 600 kN injection volume: 144 cm³ screw diameter: 35 mm platen size: 570 x 570 mm closing stroke: 500 mm Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 +  ...

NETSTAL SYN 1500-460 ist eine Plastikspritzmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Schliesskraft: 150 to; Hubvolumen: 201 cm3; Schneckendurchmesser: 40 mm; Auswerferhub: 150 mm; Auswerferkraft: 49 kN; Einspritzdruck: 2218 bar. Technische Daten: von 20 t/min bis 300 t/min; Formenheizung 20 kW; Schneckengetriebemotor 30 kW; Maschinengewicht ca. 9000 kg; Maße L×B×H 5700×1650×2220 mm. Erreicht enge Toleranzen; geeignet für Automotive, Medizintechnik, Luftfahrt und Elektronik Technische Daten ohne Gewähr

Injection moulding machine Ferromatik Elektra 50-300 selection BJ 2008

Injection moulding machine Ferromatik basetec 85-493-520 BJ 2009

Injection moulding machine Ferromatik Elektra 1100-450 evol. Year of manufacture 2006

Injection Molding Machine Ferromatik 110s-2F BJ 1999

Injection moulding machine Ferromatik K 125s/2f BJ 1995

Injection moulding machine Ferromatik K 200s /2F-493 BJ 1999

Storage bin set including several perforated galvanised metal bins with integrated handles as well as Zebatech stackable plastic bins. Ideal solution for put-away, storage, order picking, organization of spare parts or goods. Robust and reusable set for warehouse, workshop, store or logistics space. Sold without contents. Auction-ID: A1-48554-513

Mobile strapping hose reel with plastic strap roll and processing accessories. The set includes a spool trolley, a manual tensioner and a strapping pliers. Ideal solution for securing pallets, packages, goods and shipping preparation operations. Content included according to photos. Auction-ID: A1-48554-505

Powered Plastic Linked Conveyor Approximately 6,000mm length with left hand right angle turn Auction-ID: A1-48805-9

- technically efficient, ready to work – after full service - motor: 0.55 kW - working range: 410 x 110 mm - pneumatic profile clamping - pressure reducer

AB25V: Designation: Arburg 275 V 250-70 Year of Make: 2007 Clamping force: 250kN Screw diameter: 18mm Tiebar spacing: 275 x 275 FROM 50V: Designation: Arburg 375 V 500-100 Year of Make: 2008 Clamping force: 500kN Screw diameter: 15mm Tiebar spacing: 375 x 375

Year: 2007 - technically efficient, ready to work - after full service - pneumatically operated rotary table -90°/0°/+90° - working range: 200 x 240 x 2500 mm - 4 kW motor - speed ​​control (inverter) - 2 electronic position indicators - pneumatic profile clamping - cooling and lubrication system - copying template