plastic machine used for sale

Siemens Control 828 D Circulation over bed 560mm Circulation via cross slide 390 Circulation via recess 810 mm Center width 3000 mm Headstock Borungh D1-8 Spindle Nose Bushing MK7xMK5 Spindle speed 3 steps, max 2500 Travel Quill 200 mm Diameter quill 75 mm Bed width 345 mm Overall length 5170 mm, width 2100 mm, height 2230 mm Net weight 4000 kg Accessories 2 x chip conveyor, glue bar lathe chuck, turret, quick-change holder, El. Handwheels. 3 x steady rests, coolant system, manuals

creasing machine for board Make Krause Model Creasing machine Creasing length 100 cm Creasing depth adjustable/variable Available Direct

vailable Harmonisation machine for grinding unbalanced PCR_Tyres Description attached! CE-certified

Reference Num.: 3690 Brand: AGRAFIX Type: SB Stitching Machine Available: directly Status: In production Location: Deutschland Equipment: - Heftmaschnie

Verbufa Forming Machine with Integrated Flattening Belt (MBF COEX) The latest series of Verbufa COEX forming machines with wide conveyor belt and integrated flattening belt is the solution for a high production capacity of filled products. The MBF COEX machine has been specially developed for the intelligent and efficient shaping and portioning of stuffed products such as potatoes, cheese, meatballs and croquettes. With the integrated flattening belt, this forming machine is also ideal for the production of stuffed burgers. The MBF is available with 2 to 16 product streams and a conveyor belt of 400, 600, 800 or 1000 mm width. Demonstration/demonstration machine of a factory representative

They were used to package bicycle accessories Find more here - / Contact us at -

BEMA bending machine - diameter range fi 50 mm to fi 152.4 mm Find more here - / Contact us at -

Resistance annealing machine This machine anneals (thermally straightens) stainless steel wires from 0.30 - 0.50mm). FUNCTIONAL DESCRIPTION: - The machine enables heating by direct passage of electric current through the wire through the wire (resistance annealing process). The device is equipped with 4 special power stabilisers for regulation, in combination with an optical pyrometer for temperature control and thermoregulation. - The simultaneous heating of the 4 wires takes place in a chamber saturated with inert gas by the electrical contact transmitted by two conductive V-shaped discs (short-circuit rollers). are transmitted. Two further V-shaped discs have the task of guiding the wires. - The system can be integrated into an existing automatic Scholl disc system, which, however, is not not included in the scope of delivery of the machine. Alternatively, the straightened  ...

YARN PRODUCTION MACHINERY: 2X 2014 RIETER A11 UNIFLOC MACHINE 2X 2014 RIETER A48 HEAVY METAL SEPARATOR 2X 2014 RIETER B12 UNICLEAN 2X 2014 RIETER B76 UNIMIX 2X 2014 RIETER A79 UNISTOR 2X 2014 RIETER A21 CONDENSER 2X 2014 JOSSI MAGIC EYE 2X 2014 JOSSI TVS XSPECT 1X 2014 RIETER B25 WASTE OPENER 1X 2014 RIETER UNICONTROL 2X 2015 ARGEMA SMT 64500 14X 2014 RIETER C70 CARD MACHINE 4X 2016 RIETER C70 CARD MACHINE 6X 2014 RIETER SB-D 45 6X 2014 RIETER RSB-D 45 1X 2014 RIETER SPIDERWEB 10 X 2014 RIETER R60 Open End Spinning • Make : Rieter • Model : R60 • Year : 2014 • No of Rotors : 600 • Yarn Clearer Make : Rieter Q10 • Piecer Carriage : 4 • Opening Roller Type : B174 N-64 • Rotor Diameter in mm : 33 • Length Measuring : Available • Type of Spinbox : R60 • Type of Drum : SRZ • Conicity : Cylindrical • Rotor Drive Type : Aero - bearing � ...

We offer a Milling Machine Routing Star V that is an ideal choice for automotive component machining and other high-precision tasks. We have four machines available from different years ( 2012, 2014, 2017) Technical Data: Dimensions (L x W x H): 5600mm x 2990mm x 2950mm Weight: 8000 kg Power Rating: 12 kW Connection Power: 3 x 400 V, 50 Hz Hydraulic Working Pressure: Max (bar not specified) Pneumatic Working Pressure: Not specified Table Size: 1400mm x 700mm Table Type: Rotating Table Number of Robots: 2 Tool Changer: Yes Find more here - / Contact us at -

We have two Marking Machines ( bar code ) available for sale Manufacturer : MAGNEMAG Year of Manufacture : 2011 Mechanical and electrical parts are from Magnemag - The writing / ink part of Videojet Romtrust Printers SA (currently Multitech Industrial SRL) Spare Parts for MAGNEMAG Marking Machine - ARTICULATION - Drawing No: 0.36.202.092 - Quantity: 1 - ARTICULATED ARM - Drawing No: 0.36.202.091 - Quantity: 1 - ARTICULATION SUPPORT - Drawing No: 0.36.202.090 - Quantity: 1 - SUPPORT 2 - Drawing No: 0.36.202.124 - Quantity: 2 - SUPPORT 1 - Drawing No: 0.36.202.121 - Quantity: 2 - CAMERA SUPPORT - Drawing No: 0.36.202.088 - Quantity: 1 - CONSOLE - Drawing No: 0.36.202.103 - Quantity: 1 - ARM - Drawing No: 0.36.202.101 - Quantity: 1 - FRAME - Drawing No: 0.36.202.085 - Quantity: 1 - LEG - Drawing No: 0.36.202.100 - Quantity: 1 Find more here - / Contact us at -

Manufacturer: Loewe Type of Machine : Grinding Machine Condition: Used Find more here - / Contact us at -

Used SACMI Labeling Machine – OPERA 400 High-performance rotary labeling machine designed for applying plastic wrap-around labels on PET bottles in high-speed beverage production lines. The SACMI OPERA 400 offers reliable labeling performance and is suitable for large-scale bottling operations. General Information - Manufacturer: SACMI - Model: OPERA 400 - Year of Manufacture: 2006 - Machine Direction: Right to Left (R–L) Technical Specifications - Production Capacity: 35,000 bottles per hour - Bottle Plate: 32 - Bottle Size: 0.5 L PET bottle Labeling System - Label Type: Plastic labels - Application: All-around / wrap-around labeling Key Advantages - Reliable SACMI rotary labeling technology - High-speed labeling capacity of up to 35,000 bottles per hour - Suitable for 0.5 L PET bottle formats - Designed for plastic wrap-around labels - Ideal for integra ...

Used SIDEL Labeling Machine – SIDEL ALFA High-speed rotary labeling machine designed for applying plastic wrap-around labels to PET bottles in large-scale beverage production lines. The SIDEL ALFA labeling machine offers reliable performance and is suitable for high-capacity bottling operations. General Information - Manufacturer: SIDEL - Model: SIDEL ALFA - Year of Manufacture: 2001 - Machine Direction: Right to Left (R–L) Technical Specifications - Production Capacity: 45,000 bottles per hour - Bottle Plate: 36 - Bottle Size: 0.5 L PET bottle Labeling System - Label Type: Plastic labels - Application: All-around / wrap-around labeling Key Advantages - Proven SIDEL labeling technology - High-speed production capacity of up to 45,000 bottles per hour - Suitable for 0.5 L PET bottle formats - Designed for plastic wrap-around labeling - Ideal for integratio ...

Second-Hand Butter Production and Packaging Machinery Complete butter production and packaging equipment suitable for industrial dairy processing. The system includes a continuous butter machine, forming and filling equipment, and packaging units, providing an efficient solution for butter production and portion packaging. General Information - Year of Manufacturing: 2008 - Condition: Good used condition - Continuous Butter Machine - High-performance continuous butter production unit designed for reliable processing in dairy plants. - Manufacturer: AHLBORN - Model: 311/1000 - Capacity: 1000 kg/hr Maintenance History - Gear system completely revised in 2018 – hardened gears installed - Exit stars completely replaced in 2020 Output Configuration - Exit tube: 250 g - Exit tube: 25 blocks Rotary Forming and Filling Machine - Automated system for butter portion fo ...

Manufacturer: Schultheiss Type of Machine: Vacuum Casting Machine Year of Manufacture: 2017 Power Connection: - TN-C Network: 3x400V, 50Hz/PE - Power: 18 kVA - Current: 27.6A - Fuse: 3x35A Cooling Water: - Pressure: 3.5/8 bar - Temperature (min/max): 18°C/32°C - Flow Rate: 85 l/min Compressed Air: - Output: - Voltage: 300V - Frequency: 4 kHz - Power: 150 kA - Energy: 3200 kWs CE Marked: Yes Find more here - / Contact us at -

For sale: Paper recycling and sorting machine with integrated reversible conveyor belt system 1) Paper Processing Machine Manufacturer: Hartner Year of Manufacture: 2013 Operating Hours: 3500 2) Reversible Conveyor Belt Manufacturer: Hillebrand Model: 4 GB 1400 Find more here - / Contact us at -

set of machines to manually produce hard covers etc. set consists of: - Record 54 - gluer, warm and cold glue, working width 54 cm - Rimbo 110 - double turning in station, working width 110 cm - Ottima 74 - nip roller press, working width 74 cm - Schmedt Prädeck - board positioning table, 60x40cm (extension possible)

Baader Filleting Line Includes conveyors, header, 588 filleting machine, trimming line, spares, shaprening machine 2021 Full details on request

Baader Fish Filleting Machine Model: 185 Designed for medium-large whitefish Last used on cod/haddock Overhauled in 2020 and little use since

Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible.

Newtec CELOX optical sorting line, Machine has been upgraded to the newer type CELOX in 2016, The order is based on the following specifications, Ambient temperature ± 5 – 25 ºC., Product Clean, washed carrots, Capacity: 8 to 10 tons per hour, depending on the batch, (quality and sorting), Product foreign materials The Celox cannot detect foreign materials such as glass,, wood, stones etc., Functionality:, Length: +/- 3mm (less than 1% errors), Diameter: +/- 1mm (less than 1% errors), broken: 60-65% is removed (on normal broken carrots) there will be 5-6% good, carrots among the errors, C/S shape: 85-90% is removed. There will be 3-4% good carrots among the errors, Volume: +/- 5%, -Incl. conversion of complete camera unit to new version, -9 Cameras with 8 megapixel resolution (current 2 magapixel), Cameras look at the carrots from above and below at an angle, -Better detection of roo ...

Kronen GEWA5000 V, Washing machine GEWA 5000V PLUS with vibration outfeed (product outfeed over vibration screen) for bigger capacities, for example approx. 600-2500 kg per hour, depending on the product., Efficient and gentle washing of lettuces, vegetables and fruit by means of adjustable water rotation.

FILLETING MACHINE BAADER TYPE: 208 Technical description: Output conveyor width (x2): 108 mm Power supply: 400V / 50 Hz Power: 2,6 kW Dimensions: 3750 x 1050 x 1250 mm This machine processes small gutted and headed hake, small haddock, saithe, cod and whiting. The cuts of the spring-loaded circular knives being controlled by the fish itself, the BAADER 208 produces single fillets with skin of high quality and with best yield. The BAADER 208 is easy to maintain and to operate. All functional areas are very well accessible. The machine is of robust construction and consists mainly of stainless materials so that it has a long service life also when used at sea.

SALMON SLICER, CP FOOD MODEL: SILK CUT SLICER TYPE: SC 180 Technical description: Serial number: :7527 Power supply: 230/240 V, 1 Ph, 50/60 Hz, 7.5 A, 1.0 kW Inlet: Plastic wire belt, belt widht: (2x) 180 mm Outlet: Plastic belt, belt widht: (2x) 200 mm Plastic rollers, rolers widht: (2x) 200 mm Dimensions: 1800 x 1000 x 1550 mm The machine is designed for slicing smoked salmon, trout and Greenland halibut without bones or skin, and with a temperature of about ?2 - +2? C. Its important that the fish has the correct temperature.

BREADING MACHINE, KOPPENS TYPE: PR 600 Technical description: Machine number: PR600-972 Power supply: 380-440 V/50-60 Hz Power: 1.7 kW Weight: 300 Kg Stainless steel mesh belt Belt widht: 600 mm Dimensions: 2200 x 800 x 1900 mm

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-2C Technical features: Output: up to 50 cans/minute Recommended output: 20 to 50 cans/minute (according the can type) Format: diameter 150 mm Cans height: max. 120 mm

HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier  ...

FILLETING MACHINE, BAADER 36 Technical description: Power supply: 400 V/50Hz Dimensions: 3500 X 1000 X 1700 mm - 2300 X 1000 X 1100 mm Can be combined with Automatic feeder BAADER 488 The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483 or 484. A skinning machine BAADER 55 can be attached for the production of skinless herring fillets.

FILLETING MACHINE FOR SARDINE, HERRING, BLUE WHITING, BAADER TYPE: 134 Technical description: Power supply: 380 V, 50 Hz, 12,0 A, 2 kW, 3 Ph Dimensions: 3000 x 2100 x 1200 mm Weight: 450 Kg Can be combined with Automatic feeder for sardine and herring, Baader type: 478 This machine is especially designed for the filleting of small herring and pilchard with an overall lentgh of 15-25 cm (25-125 g), the convenient infeeding procedure and the steplessly adjustable operating speed permit high throughput. Excelent yield is guaranteed by a meat-saving selfadjusting headcut, adjustable tailcut and reliable passage through the filleting tools leading to smoothly cut block-fillets, single fillets without dorsal fins as well as belly cut herring with or without tail fins. Combined with the automatic feeder BAADER 478, the machine becomes an automatic filleting unit operated by only one person fo ...

FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-110 Technical features: Output: up to 100 cans/minute Recommended output: 40 to 80 cans/minute (according the can type) Formats: 1 unit with format diameter 73mm (ID 2015) 1 unit with format diameter 99mm Others formats: diameter 65mm, 1/2 oval, 1/4 oval Cans height: 25-62mm

A flexographic printing, slitting, die-cutting and gluing system with bundle ejector (Flexo Foldergluer) for corrugated board production and processing DY Machinery is available. Processes: Feeding, printing, creasing, slitting, die-cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet guide X/Y: 1200mm/2750mm, max. printing area X/Y: 1170mm/2700mm, min. sheet dimensions X/Y: 320mm/600mm, total system weight: approx. 42t. 1) Belt feeder with vacuum, dust separator, speed indicator and alignment device. 2) Top-side flexo printing with draw roller transfer, ink stop sensors and automatic cleaning. 3) Creasing and slitting unit with trimming and glue flap knife, slitting knife thickness: 8mm. 4) Rotary punch with polyurethane anvil and soft punching system, punching dimensions: +/-25mm. 5) Downward folding and gluing unit based on VALCO VC 350 AG system. 6) ...

Lunch Box, Hamburger Box. Food Box Gluing Machine The machine was only adjusted and tested Can be demonstrated on site

Manufacturer: CIMEC Model: Labeling Machine Year of Manufacturing : 2013 Power: 1.5 kW Voltage: 400V Phase: 3 Phase + Neutral + PE (Protective Earth) Frequency: 50 Hz CE Marked: Yes Additional Information: The machine comes with parts compatible with the following bottle formats: - 33cl Long Neck - 50cl Long Neck - 27.5cl Long Neck Find more here - / Contact us at -

(showroom machine) Main Technical Data Number of Spindles: 4 spindles Gundrilling Diameter Range: 4 - 20mm Working Method of Tool: Rotating Working Method of workpiece: Rotating Clamping Method: Clamping Cone Max. Drilling Depth: 800mm Workpiece Max.Outer Diameter: 300mm Drilling Feedrate: 1-180mm/min Spindle Center Height: 220mm Spindle Distance: 158.75mm Control System: SIEMENS 828Dsl A.C. Spindle Motor Power: 2×15 kW Spindle Speed (Infinitely Variable): Max.5000 RPM Tailstock Spindle Speed: 70rpm Rapid Traverse Speed: 6000mm/min High Pressure Pump Motor Power: 4×7.5 kW Coolant Flow Rate: 4×46 L/min Filter accuracy: 20µm Max.Coolant Pressure: 100 bar Oil Tank: 1200L Weight of Machine: 10000 Kg. Electrical Supply:  ...

Offered as a package deal: GS-24 PLUS 200 and GS-24 PLUS SPM machines included. Machine 1 (Has two individual sealing units arranged one behind the other) Model: GPPL-GS-24-Plus-200 Year of Manufacture: 2020 The machine set is capable of producing various pouch types, including: - Three Side Seal Pouches (with/without zipper) - Stand-up Pouches (with/without zipper) - Both Side Gusset Pouches - Shape Pouches (via attachment) - Bottom Film Synchronization & Laminate Roll Conversions Applicable Films - Heat-sealable laminated films: - PET poly, PET MET poly, PET ALU foil poly, paper poly, multi-layer films (e.g., PA/PE) Production Range - Output: Up to 200 shots/min or 35 meters/min - Actual output depends on pouch size, repeat length, and laminate type Product Size Range - Three Side Seal Pouch: - 100–600 mm (W) x 100–400 mm (L), 1–2 line operations - Stand-up Pouch: - Si ...

Turret milling machine DYNAMILL B-4V - capacity 900x380x600 mm, Digital read-out system, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1270x254 mm, Longitudinal travel x axis: 900 mm, Cross travel y axis: 380 mm, Vertical travel z axis: 406 mm, Spindle taper: 40 ISO, Spindle speed: 40- 3800 rpm, Number of spindle speeds: Stepless, Spindle motor power: 3,7 Kw, Quill spindle travel: 127mm, Number of working feeds: stepless by DC motor, Weight: 2.000 Kg, Accessories: DRO, coolant.

Marel concept 500 labelling machine, - top and bottom labelling machine

From a current recycling we offer you 3 x 3 modular machines/systems that are used to process spokes of impellers. The French. Manufacturer MACH 1 is a leading manufacturer in this segment. The pictures show a "line". We have 3 of them each. Year of construction 2022 Condition: good Original price: 355.000,00 € net Asset Manager: M. Vorkötter Phone: 0202-25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 68753 Waghäusel The sale is without warranty Subject to prior sale

Manufacturer: MITSUBISHI Model: Laser Cutting Machine Year of Manufacture: 2017 3000×1500 mm Power: 2.7kw Technology: Co2 2 changing tables AVAILABLE: immediately Find more here - / Contact us at -

Manufacturer: Kuhlmeyer Model: Double Sandbelt Machine Year of Manufacture: 2019 Condition: Fully Operational Find more here - / Contact us at -

Manufacturer: Joysonquin Ningbo Model: Tesla Model Y Clip Machine Year of Manufacture: 2023 Type of Machine : Electrical Specifications: - Voltage: 3x400V AC / N / PE - Frequency: 50Hz - Power: 15 kVA - FLC (Full Load Current): 40A Air Requirements: - Pressure: 6 bar - Consumption: 800 L/min Weight: 2500 kg Remarks: Machine equipped with two KUKA robots: KR 10 R1100-2, One partially disassembled for spare parts Find more here - / Contact us at -

NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts an ...

Buispolijstmachine Voor buizen tot diameter 200 mm

CURRENCY: MYR If interested, kindly contact Ms. Fatimah (fatimah_asmad@topglove.com.my)

Machine de mesure tridimensionnelle Marque Renault SEIV type portique CNC Dimensions : 2000 x 1500 mm Courses en X : 1480 mm Courses en Y : 1180. mm Courses en Z. : 890 mm Elle est composée d'une table n marbre , de 3 liaisons glissières , d'un pupitre de commande , d'une commande numérique et d'un palpeur .

Used Capping Machine AVE 6T up to 7000 bph The used capping machine AVE 6T up to 7000 bph delivers high efficiency and versatility for the bottling industry. Specifically, it handles medium to high-speed production lines, ensuring consistent and reliable results. Furthermore, the machine for Stelvin Lux uses six capping heads to provide precise and uniform operation throughout every bottling cycle. Moreover, its design maximizes production speed, enabling the handling of up to 7000 bottles per hour. This performance, in turn, supports businesses aiming to improve operational efficiency and maintain consistent product quality. The system supports aluminum screw caps of the Stelvin Lux type, measuring 30×60 mm. Consequently, this cap type creates an airtight seal, preserving product integrity and extending shelf life. Producers in the wine and beverage industry often choose this forma ...

Like NEW! Never used Inductive hardening machine for bolts M8 and M10 with year of manufacture 2019 The equipment is designed for automatic inductive hardening of screws and bolts M8 and M10. The plant was built by the company Grimm Zuführtechnik. It is designed for approx. 70-80 parts per minute (depending on the component) and has various monitoring options (temperatures, component heights, component types, rotation, etc.). The components are conveyed from a hopper belt via a steep conveyor to a linear sorter and from there are separated and transferred to an 8-station indexing table with 2 nests per station. A 50kW HF generator from IDEA is connected, which provides further monitoring (energy quantity, earth fault monitoring, flow quantity and water temperature of the inductor, etc.). The plant has its own tank for quenching water, from which the components are transported out  ...

KRONEN GEWA 2600V – Fully Refurbished Vegetable Washing Machine, We are offering a Kronen GEWA 2600V vegetable washing machine in excellent condition, fully refurbished and ready for immediate use., Refurbishment Details:, - Completely overhauled by professionals, - Fitted with a brand-new original pump, - All parts inspected, cleaned, and tested, - Machine runs smoothly and efficiently, Features:, - Efficient vegetable and salad washing system, - Gentle product handling through whirl washing principle, - Made of high-quality stainless steel, - Ideal for food processing companies, - Location: Emmeloord, Available Immediately, Invest in a high-quality machine with the reliability of KRONEN – now with the added value of a full refurbishment and a new pump!, For more information, photos, or to schedule a viewing, please contact us.