137,142 used machines on RESALE, but how to find them? Machine Search
Key data: 20000 kN
Angebot/Offer: Engel Duo 17060/2000 Viper Robot 60 approx. 4900h YOC 2021
2-SHAFT SHREDDER - HEAVY DUTY, The machine is constructed in sturdy carbon steel and is complete with a supporting structure (1.400 mm heigh) and a loading hopper prepared to receive material from a spider or a belt, size 2.500 x 1.500 x 1.200, Shredding chamber mm.1500 x 900, independent shafts 1.500 mm long, shafts are driven by independent electromechanical motors., 2 x 75 kW motors, The maximum installed power is used to absorb load peaks. Normally, absorption will settle at values around 50% of the installed power., Shafts speed 13-15 rpm, N.15 knives 100 mm thick with 4 hooks, Automatic inversion on overload, Automatic lubrication pump, Tolerance : iron rods with a maximum thickness of 4 mm (up to 3%-4% of the total material), Electrical panel with PLC, Cabinet dimensions: L 1800 mm, H 2000 mm, D 500 mm., installed power - used power in work: about 60-65% : 150 kW, availability: ab ...
Key data: 6500 kN, 105 mm
Location is : Latino America !
Key data: 1500 kN, 415 g/PS, 55 mm
Built in 1999 Clamping force: 150 tons. Screw diameter: 55 mm Displacement: 456 cm³ Spray pressure: 1564 bar Very good condition!
Year: 2006 - technically efficient, ready to work – after full service - possibility of mounting 3 milling heads - top and bottom chiseling - control via PLC - automatic machining process
clamping force: 1500 kN injection volume: 141 g/PS screw diameter: 35 mm platen size: 470 x 470 mm Condition: used, Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITION Injection unit: - Screw diameter: 35 mm (wear-resistant) - Centring ring diameter: 125 mm - Max. shot weight: 141 g (PS) - Injection pressure: 2,500 bar Closing unit: - Clamping force: 1,500 kN - Max. opening stroke: 750 mm - Mould installation height: min. 250 mm - Mould clamping plates: 470 x 470 mm - Approx. operating hours: 79,000 h (still in use) - Operating voltage: 3x 400 V, 50 Hz - Nominal motor heating current: 75 / 40 A - Total current: 115 A - Total connection: 65 kW - Core pulls: 1x - Hot runner control points: 6x - Temperature control unit interfaces: 6x (20 mA) - Approved for high temperatures ...
PLASTIC WASHING. LINE for GRAVIMETRICAL SEPARATION, including:, collection hopper, auger, STAINLESS STEEL GRAVIMETRICAL SEPARATION TANK, size mm.5.800 x 1.600 ca, n.4 moving rolls, sinking screw, drained screw for collection of floating material, n.2 additional sinking screws, lifting screw for sunk material, n.2 TECNOFER CENTRIFUGAL DRYERS in sequence, 18,5 kw, 720 x 1.500 mm, connection screws, collection hopper, sucking unit, The line is offered as is, where is, Vertical mixer available separately, conditions: mounted, immediately available, capacity: ca.500-1.000 kg/h depending on material and contamination
Year: 2000 - technically efficient, ready to work – after full service - 4 heads - support arms
Key data: 500 kN, 95 g/PS, 30 mm
Year of Make: 2005 Clamping force: 50 tons. shot volume: 106 cm³ shot weight: 95 gr./PS Screw diameter: 30 mm with take off robot Good condition
Guillotine, reel slitters for paper and plastics 50 T, Working width 2.500 mm, Working height 850 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulik pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](.germanplast.eu/listings/4115633-guillotine-reel-slitter) for full description., Force: 50 T
GUILLOTINE PAPER AND FILM REEL SLITTER 50 T, Working width 2.500 mm, Working height 1.250 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](.germanplast.eu/listings/4115633-guillotine-reel-slitter) for full description., Force: 50 T
Guillotine, reel slitters for paper and plastics 2500x850mm, Working width 2.500 mm, Working height 850 mm, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitters for paper and plastics 35 T, constructed in sturdy painted steel,, Working width 2.500 mm, Working height 1.250 mm, No.2 pumps 30+30 lt/min Volume 21+21 ccm, Speed up : 84 mm/sec, Speed down : (80 Bar) 40-20 mm/sec, Oil tank 175 lt, Cutting force 2x17,5 Ton., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Increased speed system, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitter for paper and plastics 25 T, NOW IN STOCK, Working width 1.500 mm, Working height 850 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T, availability: NOW IN STOCK
Guillotine, reel slitters for paper and plastics 50 T, Working width 3.000 mm, Working height 1.250 mm, No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 41-20 mm/sec, Oil tank 255 lt., Cutting force 2x25 Ton., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50To, installed power - used power in work: about 60-65% : 15
Guillotine, reel slitters for paper and plastics 30T, Working width 1.500 mm Working height 1.250 mm Cutting force 1×30 Ton., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt. Single piston with 2-sides racks to avoid any oscillations and swaying 7,5 Kw drive 400V 50 Hz Safety devices included : Emergency STOP button+ pull-rope STOP+ Knife protection + 2-hands operation + protection grids + hydraulic knife locking system. hydraulic pack can be lodged on top for space saving Complete with control panel User’s manual, drawings, CE compliance for overseas transport, you will need an out-of-gauge 20’fcl Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Size for transport: LxWxH 2,5 x 1,5 x 2,50 m. + 0,8 x 0,6 x 1,0 m. (hydrauluc pack), Force: 30 T, width: 1.500 mm.(59.06), height (cutting): 1.250 ...
Guillotine, reel slitter for paper and plastics 60 T, Working width 3.000 mm, Working height 1.500 mm, Increased speed system, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T
Guillotine, reel slitters for paper and plastics 60 T, Working width 3.500 mm, Working height 1.500 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15
Guillotine, reel slitters for paper and plastics 60 T, Working width 3.500 mm, Working height 2.000 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T
Guillotine, reel slitters for paper and plastics 35 T, Working width 2.000 mm, Working height 1.500 mm, Increased speed system, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitter for paper and plastics 35 T, NOW IN STOCK, Working width 2.000 mm, Working height 1.250 mm, Increased speed system, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T, availability: now in stock, working width: 2000 mm, conditions: new machine, type: compliant with EU safety regulations
Guillotine, reel slitters for paper and plastics 35 T, Working width 2.000 mm, Working height 850 mm, No.2 pumps flow 30+30 lt/min, Pumps volume 21 + 21 ccm, Speed up to 84 mm/sec, Speed down:(80 Bar) 20-40 mm/sec, Cutting force 2x17,5 Ton., 9 Kw drive 400V 50 Hz, Oil tank 175 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitters for paper and plastics 30 T, Working width 1.500 mm, Working height 850 mm, Cutting force 1x30 Ton., 7,5 Kw drive 400V 50 Hz., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 30 T, availability: about 8 weeks time from confirmation
Guillotine, reel slitters for paper and plastics 25 T, NOW IN STOCK, Working width 1.500 mm, Working height 1.250 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T, availability: NOW IN STOCK
Guillotine, reel slitters for paper and plastics, These reel slitters are particularly recommended to reduce the size of scraps before a further recycling process. They are ideal for paper, plastic, fabric, rubber, polylaminated, AL foil, in the shape of REELS, BALES, LOOSE MATERIAL, FIBERS, and more., Proposed in different standard dimensions and cutting forces, or bespoke to project, these machines feature a sturdy steel structure, top quality components and are constructed according to the strictest EU regulations to perform at their best and keep their value in the years with the simplest maintenance., Sturdy and reliable, these guillotines give excellent performances even on lower tonnage, for paper and plastic film reels., with increased speed system, our guillotines can double the work done, compared with other models., One operator is needed to work in full safety conditions: 2-h ...
Year: 2007 - technically efficient, ready to work – after full service - disc cutter: 250 mm - 4 CNC axes - working height: 200 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/outfeed table
TECHNICAL DATA OF THE MACHINE General Clamping force: 50 t Year of manufacture: 2006 Control: NC4 Weight: 2,700 kg Dimensions (L × W × H): 3.8 × 1.1 × 2.1 m Injection unit – .../200 Screw diameter: 22 mm Injection volume: 41.8 cc Specific injection pressure: 2,800 bar Closing system – 50/... Clamping force: 50 t Tool plate dimensions: 520 × 520 mm Clearance between columns: 355 × 355 mm Tool height: 210 mm Opening Distance: 400mm Maximum Plate Distance: 610mm
Line for filling delicatessen products into plastic - trays, consisting of:, Vessel filling system, brand Waldner, type 12.3, year 2011, 2-track (two different formats) – however, only single-track operation is possible., Format section 1: Round cup diameter 100mm (including edge) height 80mm and 60 mm, Format row 2: rectangular cup 185mm long 135 mm wide (incl. edge) 35mm deep, The shells are sealed with film from the roll, Roll magazine about 500mm long, 400mm wide, Space requirement Waldner: approx.: 2,100 m 2,100 mm, Discharge belt of Waldner: approx 1,800 mm, Dosing of liquid and free-flowing components:, The plant has two filling heads, which are filled via piping directly from the boiler., The pipe system can be fully purged., The toad line and Maso – Sinus Pump, type SPS 3, are included in the scope of delivery., Feeding of the multi-head weigher using two belt conveyors:, S ...
Year: 2006 - technically efficient, ready to work – after full service - 2 pneumatic motors (top + bottom) - disc cutter: 250 mm - 2 CNC axes - working height: 140 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/Outfeed table
used screening machine, function-tested, immediately available
Ref. no.: 17507 Manufacturer: DEMAG Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg
A Cyklop strapping machine is being sold. Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Price is net Loading facilities available All information without guarantee
Year: 2009 - technically efficient, ready to work – after full service - discs: 500 mm - working length: 3700 mm - PC control (Windows XP) - online access - vertical and horizontal pneumatic clamps - automatic disc guards - roller feeder - support for longer profiles
3 x Injection moulding machines Stork 440 to 1 x Injection moulding machine Stork 660 to 2 x Injection moulding machine Stork 900 to
Key data: 2500 kN, 579 g/PS, 60 mm
1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET250-840 Concept Year of Make: 2004 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 636 cm³ Moulded part weight: 579 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W633-931 2 pcs core train
Key data: 600 kN, 94 g/PS, 30 mm
1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET60-200 Concept Year of Make: 2003 Clamping force: 60 tons Spar spacing 420 x 420 mm Screws DN: 30 mm Max. displacement: 106 cm³ Moulded part weight: 94 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W621-1381 2 pcs core train
Key data: 4200 kN, 2 g/PS, 80 mm
1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM420-4300CX Year of Make: 2012 Clamping force: 420 tons Spar spacing 800 x 800 mm Screws DN: 80 mm Max. displacement: 1,810 cm³ Moulded part weight: 1,647 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit
Key data: 2500 kN, 476 g/PS, 55 mm
1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM250-1000CX Year of Make: 2017 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 55 mm Max. displacement: 523 cm³ Moulded part weight: 476 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit
Year: 2018 technically efficient, ready to work – after full service hydropneumatic head feed with automatic profile height measurement automatic zeroing after the end of the work cycle double vertical and horizontal pneumatic clamps minimum internal pack dimension: 450 mm maximum internal pack dimension: 2740 mm
technically efficient, ready to work - after full service bar spacing: 100 mm dimensions: 265 x 265 cm height: 150 cm weight: 350 kg
Injection moulding machine Battenfeld Machine Type TM 2700/2800 Control Type B2 Year of construction 2003/04 Screw diameter 75 mm
4 pieces available,, Useful length: approx. 4,900 mm,, Usable width: approx. 1,115 mm,, frame: stainless steel,, with Stöber gear motor type K21R 90 S4, 1.1 kW., usable length: approx. 4,900 mm,, usable width: approx. 1,115 mm,, Frame: Stainless steel,, Useful length: approx. 4,900 mm,
Injection moulding machine Krauss Maffei KM 800-5700 BJ 1999 Technical data on request
This plastic 3D printer was manufactured in 2018. The MASSIVIT 1800 PRO features a print volume of 145 x 111 x 180 cm and supports materials like Dimengel 90 and 100. It includes an automatic cleaning mechanism, advanced monitoring with an integrated camera, and remote control capabilities. If you are looking to get high-quality 3D printing capabilities, consider the MASSIVIT 1800 PRO machine we have for sale. Contact us for more information about this machine.
Arburg 570C2000-800 FY2006 Golden Edition, 1 core hoist, 1 conveyor belt 33.400 Multilift SELECT 6kg Arburg 470C-2000-800 FY2005 No core features; 1 conveyor belt
This 3-axis 3DGence Industry F420 was manufactured in 2021, featuring Fused Filament Fabrication with a dual extrusion head and a cleaning system for complex geometries. It includes three print modules for various materials, a 380 × 380 × 420 mm working chamber, and temperatures up to 500°C for the print head. If you are looking to get high-quality 3D printing capabilities, consider the 3DGence Industry F420 machine we have for sale. Contact us for more information about this machine.
This EVO-tech EL-102 V2 was manufactured in 2021. A plastic 3D printer featuring a robust 400 VAC system, it operates efficiently within a temperature range of 5–35 °C and humidity levels of 20–85% RH. It adheres to safety with IP41 protection and CE marking. Consider the opportunity to buy this EVO-tech EL-102 V2 plastic 3D printer. Contact us for more information.
year 2009. injection volume 9 cm3. Immediate ex stock available
This STEINER Projet MJP 2500 Plus was manufactured in 2018. Its a plastic 3D printer designed for detailed and precise object creation. Ideal for prototypes and small-scale production, this machine represents a significant opportunity for those looking to enhance their 3D printing capabilities. Contact us for more information.
maximum number of results exceeded
please refine your search
