133,577 used machines on RESALE, but how to find them? Machine Search
Roll-off trolley for plastic belt, light version
Elevating belt , s/s frame, plastic mesh belt with dividers, belt width: 410 mm, elevating height: 2900 mm, divider width: 300 mm, divider height: 50 mm, distance between dividers: 230 mm, total dimensions: 3500 mm x 700 mm x 500 mm.
Suitable for steel and plastic strapping, electro-galvanized, very robust and stable design, including a shelf and brake. Suitable for steel and plastic strapping Core diameter 406 mm, belt width 9-19 mm Core diameter 406 mm, belt widths 9-19 mm
GARTEX WHEELBARROW PLASTIC KW100KID 100 litres Auction-ID: A1-40897-390
Year: 2015 - technically efficient, ready to work – after full service - working dimensions: 2800 x 1350 mm - tilting stop pins - pneumatically tilted - sliding/brush strips - pneumatic gun DGS 3100 - pneumatic screw feeder ASS 60
Complete Britas filter with many spare parts. Off site, available immediately.
Submersible Pump, Chemical Pump, Water Pump, Centrifugal Pump STÜBBE Type: ETL 50-160 Submersion Depth: 570 mm Pump Foot: Ø 350 mm Dimensions: 1100 x 550 x 550 mm Material: PP - FPM
Ref. no.: 16369 Manufacturer: BATTENFELD Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: very l ...
Fully automatic cross strapping line Mosca RO-TRI-5 & RO-TR500-4 Condition: overhauled, serviced, fully functional, ready for use Equipped for 5 mm polypropylene strapping Equipped with a baler Output approx. up to 36 packets/min Speed table hinges infinitely adjustable Tape feeding and tape insertion into frames automatically Welding system: Heat wedge welding/welding tongue
Submersible Pump, Chemical Pump, Water Pump, Centrifugal Pump DIETZ-MOTOREN KG Type: FDR 90 L/4P Submersion Depth: 520 mm Pump Base: Ø 240 mm Motor: 1,5 kW 220 / 380 V 1430 rpm Dimensions: 840 x 290 x 330 mm
Submersible Pump, Chemical Pump, Water Pump, Centrifugal Pump DIETZ Type: FDR 90 L/4P Submersion Depth: 480 mm Pump Base: Ø 245 mm Flange: Ø 480 mm Motor: 1,1,000 mm 5 kW 220 / 380 V 1430 rpm plastic housing Dimensions: 780 x 310 x 300 mm
Stainless steel plastic work table PAGUS table surface: 1270 x 590 mm with perforated grid ! stainless steel frame ! replaceable shelf cable duct at the back Dimensions: 1300 x 700 x 790 mm
Key data: 50 , 1 , 14
Manufacturer: Battenfeld Type: Microsystem 50 Year of production: 2000 Control: Unilog B4 Closure Type: Knee Closing force: 50 kN Maximum mold dimensions: 196 mm x 156 mm Plate Size: 196mm x 364mm Tool height: min 100 Opening Distance: 200mm Maximum distance between plates: 300 mm Screw: 14mm Stroke Volume: 1.1 ccm / 1 gram PS Injection pressure: 2500 bar General Total power: 2 kW Dimensions: 1.9 m x 0.8 m x 2.4 m weight: 1100 kg On-screen text: German Accessories: • Rotary table, • Robot integrated with the machine, • Fully electric injection molding machine, • Quality monitoring module, • Cleanroom module, • In-mold pressure control • Quiet operation of the machine • Additional 14 mm auger
500 plastic pallet boxes Used goods, see pictures Manufacturer: Uni-Pak Colour grey/black Dimensions: 1200x800x765mm 500 pieces available. Negotiation price: € 30,- net from stock P10271 Larger quantities on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)
Key data: 2000 kN, 240 g/PS, 45 mm
Arburg 520 C - Allrounder 2000-675 -Injection molding machine - Control: Selogica - Handlebar spacing: 520 x 520 mm - Handlebar extension: 100 mm - Tool installation height: 350 mm - Opening travel: 650 mm - Centering: 125 mm - Core pull: 2 - Screw diameter: 45 mm - Shot weight - HP : 240g - Clamping force: 2000 KN - Operating hours pump: 61908 - Automatic operating hours: 55566 - Working position: Standard
Key data: 5000 kN
Offer(4x): Engel Duo 1800/500 BJ./YEAR 2016 38500h
Used line for extruding flat plastic film for grass yarn and carpet yarn Chinese production. The line includes: - Extruder, - Filter mesh machine, - Film extraction and cutting system, including stainless steel water container, - Stretching heating oven, - 3-roll stretching machine, - Fibrillator, - 3-roll annealing machine, - 3-roll cooling machine, - Oil lubricator, - Magnetic winding machine, - Side fiber crusher, - Side blower and waste collector, - Electric control cabinet.
Year: 2008 - technically efficient, ready to work – after full service - chiseling up + down - PLC control - feeding table
Clamping force: 1250 kN Ø worm: 35 mm Column spacing: 470 mm Injection weight: 142g Min. mould height: 300 mm Total weight: approx. 6,000kg
1.600 litre, Stock number: T3890, Litre: 1.600, Material: Plastic, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: In a leg stand, 4 pcs. legs, Top: Open, Bottom: Conical, Agitator: Yes, Agitator type: Frame agitator with scrape, Agitator placement: From bridge at the top, Motor: 0,12 kW - 220/240 Volt - 97 rpm., Inner diameter: Ø 1330 mm. , Total height: H 2810 mm., Other: Inner overflow/drain.
2.200 litre, Stock number: T3891, Litre: 2.200, Material: Plastic, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On a plain bottom, Top: Plain, closed with 2 x 1/2 lids , Bottom: Plain, Turbolence plate: 2 pcs., Inner diameter: Ø 1500 mm. , Total height: H 1250 mm.
290 litre, Stock number: T3703, Litre: 290, Material: Plastic, In stock: Yes, Amount in stock: 2 pcs., Item: Hopper, Standing: In stainless leg frame, 4 pcs. legs, Top: Open top with lid., Bottom: Conical, with sliding draught , Inner diameter: Ø 760 mm. , Total height: H 1170 mm.
3.000 litre, Stock number: T3599, Litre: 3.000, Material: Plastic, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On frame with 6 pcs. of legs, Top: Plain, closed, Bottom: Plain, Agitator: Yes, Agitator type: Mixing wing, D 1200 mm., Agitator placement: From bridge at the top, Motor: 0,37 kW - 230/400 Volt - 25,2 rpm., Inner diameter: Ø 1400 mm., Total height: H 2450 mm.
3.000 litre, Stock number: T3598, Litre: 3.000, Material: Plastic, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On leg frame with 6 pcs. of legs, Top: Plain, closed, Bottom: Plain, Agitator: Yes, Agitator type: Mixing wing, D 1200 mm., Agitator placement: From bridge in the top, Motor: 0,3 kW - 220/380 Volt - 33,5 rpm., Inner diameter: Ø 1400 mm., Total height: H 2750 mm.
2.750 litre, Stock number: T3265, Litre: 2.750, Material: Plastic, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On flat bottom, Top: Open with lid, Bottom: Plain, Inner diameter: Ø 1510 mm. , Total height: H 1550 mm.
2.000 litre, Stock number: T2957, Litre: 2.000, Material: Plastic, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On flat bottom, Top: Dished, closed, Bottom: Plain, Inner diameter: Ø 1280 mm., Total height: H 1800 mm.
175 litre, Stock number: T2244, Litre: 175, Material: Plastic, In stock: Yes, Amount in stock: 4 pcs., Item: Hopper, Standing: In stainless leg rack, 4 pcs. legs, Top: Open top with lid., Bottom: Conical, with throttle valve, Inner diameter: Ø 750 mm.
1.700 litre, Stock number: T2015, Litre: 1.700, Material: Plastic, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Hanging: In mountings, Top: Plain, closed, Bottom: Conical, Tank cover: In the top, Ø 500 mm., Agitator: Yes, Agitator type: Propeller, Agitator placement: From bridge in the top, Motor: 0,75 kW - 230/400 Volt - 1390 rpm., Inner diameter: Ø 1250 mm. , Total height: H 2250 mm.
QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- round-type) (available separately), This machine is to be electrically connected to an ...
CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...
QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination) About 60 lt., The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- for-water-powder-granule) (available separately) to be reused in the proces ...
AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 80 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, Bale size LxWxH 1.100x720 mm (adjustable length), feeding hopper size : 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 5-7 Ton/h, - with 50 kg/m3 materials 9-11 Ton/h, - with 120 kg/m3 materials 17-19 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 25 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, oil tank capacity 950 lt., Machine weight ca.25.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen ...
Key data: 4000 kN, 80 mm
Machine + Viper Robot 12
AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 100 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, adjustable channel pressure, Bale size LxWxH 1.100x720 mm (adjustable length), Filling hopper size 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 10-12 Ton/h, - with 120 kg/m3 materials 18-20 Ton/h, 5 vertical-wire binding, upper and lower photocells to control material feeding feeding, Cycle with no material, no twisting : 22 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Baler weight ca.27.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic bind ...
AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 120 Tons ca. pressing force, 90 kw drive, complete with oil heating and cooling, proportional pressure flow controller, Filling hopper 1.100 x 1.600 mm., Bale size LxWxH 1.100x720 mm (adjustable length), Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 11-13 Ton/h, - with 120 kg/m3 materials 19-22 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 21 ca, Pre-press flap with 2 x 26 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Machine weight ca 28.500 kg, oil tank capacity : 1.500 kg, General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen panel., A M ...
A welding machine Pfaff including a rotary shear Kuris and an unwinding device MK is available. 1) Welding machine Pfaff 8309. 2) Rotary shear Kuris BOM 101. 3) Unwinding device MK Sewing Technology Systems. Documentation available. An on-site inspection is possible. The system is dismantled and ready for loading.
Injection moulding machine Engel e-motion 2440/380 T BJ 2008
Year: 2006 technically efficient, ready to work – after full service 3-spindle (high-speed motors) possibility of setting for various profiles (frame / sash) pneumatic profile clamping
2 x Husky HL500RS80 2016 injection moulding machines
Injection moulding machine Krauss Maffei KM 50/90 C2 BJ 2001
Netstal Elion 800 injection moulding machine with Wittmann Handling Primus The machine is fully functional and has only 6500 operating hours
Injection moulding machine Arburg 470C 2000-675 BJ 2007
Injection moulding machine Krauss Maffei KM 300-1900 C2 BJ 2000
Injection moulding machine Arburg 420S 1300-350 BJ 2000 without handling
Injection moulding machine Demag erg. 250/560 840 BJ 2001
maximum number of results exceeded
please refine your search
700 € 
