plastic bag machine used for sale

Key data: 2500 kN, 579 g/PS, 60 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET250-840 Concept Year of Make: 2004 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 636 cm³ Moulded part weight: 579 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W633-931 2 pcs core train

Key data: 600 kN, 94 g/PS, 30 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET60-200 Concept Year of Make: 2003 Clamping force: 60 tons Spar spacing 420 x 420 mm Screws DN: 30 mm Max. displacement: 106 cm³ Moulded part weight: 94 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W621-1381 2 pcs core train

Key data: 4200 kN, 2 g/PS, 80 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM420-4300CX Year of Make: 2012 Clamping force: 420 tons Spar spacing 800 x 800 mm Screws DN: 80 mm Max. displacement: 1,810 cm³ Moulded part weight: 1,647 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit

Key data: 2500 kN, 476 g/PS, 55 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM250-1000CX Year of Make: 2017 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 55 mm Max. displacement: 523 cm³ Moulded part weight: 476 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit

Year: 2018 technically efficient, ready to work – after full service hydropneumatic head feed with automatic profile height measurement automatic zeroing after the end of the work cycle double vertical and horizontal pneumatic clamps minimum internal pack dimension: 450 mm maximum internal pack dimension: 2740 mm

technically efficient, ready to work - after full service bar spacing: 100 mm dimensions: 265 x 265 cm height: 150 cm weight: 350 kg

Injection Molding Machine FCS SD 6000 BJ 2016

Injection moulding machine Battenfeld Machine Type TM 2700/2800 Control Type B2 Year of construction 2003/04 Screw diameter 75 mm

Injection moulding machine Krauss Maffei KM 800-5700 BJ 1999 Technical data on request

• For plastic tubes (HDPL, LLDPL) • Hot air sealing • 9 tube holder stations • Output max. 40 tubes/min • For tube diam. 9-50 mm depending on tube holder format set • Tube height 60-240 mm • Dosing 20-220 ml depending on dosing pump • 1 rotary valve dosing pump 10-100 ml (1 additional as spare) • Tube feed magazine • Filling funnel with agitator, heatable with heating/cooling device • Print mark control (alignment of the tube to the print image) • Embossing 1 line • 2 tube holder format sets: tube diam. 25 mm, tube length 90 mm, tube diam. 35, tube length 165 mm • PLC Siemens S7-300 • Connection 400V/50Hz • Has worked in line with upstream tube labelling machine 05-0179

Arburg 570C2000-800 FY2006 Golden Edition, 1 core hoist, 1 conveyor belt 33.400 Multilift SELECT 6kg Arburg 470C-2000-800 FY2005 No core features; 1 conveyor belt

year 2009. injection volume 9 cm3. Immediate ex stock available

This TTN 400 250 was manufactured in 2012. It features an XY table for product positioning and an electronic shuttle for 6-color printing. The machine includes a 4-color inkwell and multiple cups for versatile printing options. Ideal for those looking to enhance their printing capabilities. Contact us for more information.

This TELSONIC TelsoSPlice TS3-6 P3.6 wire welding sytem was manufactured in 2015. It features a 15 SVGA touch screen, a pneumatic unit, and a 3.6kW WeldHead. The machine includes a barcode scanner, keyboard, and a spacious 2000 x 1000 mm table. Consider the opportunity to buy this TELSONIC TelsoSPlice TS3-6 P3.6 Table. Contact us for more information about this machine.

Injection moulding machine Arburg 820S 4000-4600 BJ 2016

Year: 2003 technically efficient, ready to work – after full service flash limit: 0.2 – 2 mm maximum welding dimension: 2400 mm support path programmable PLC controller automatic welding process

2 x injection moulding machines EL - EXIS 200 S incl. Wittmann robot cell for removal and feeding ( No IML ) EL - EXIS 300 S incl. Wittmann robot cell for removal and stacking ( no IML )

Injection moulding machine Engel DUO 4550/800 BJ 2004

automatic rotary machine,, in use for mustard,, set up on round plastic cups with a diameter of 70 mm and a height of 80 mm,, additional format for rectangular cups: 55 x 43 x 17.7 mm, Filling volume: 5 - 200 ml, Output: up to 1,500 cups per hour,, Rotary consisting of:, Cup magazine, automatic unstacking of the cups,, filling station,, Lid station with corresponding lid magazine and automatic unstacking of the lids,, Output of the filled and sealed containers to an integrated collection table

ZENO shredder type ZTLL 3000 x 2500 For crushing PVC window frames Capacity approx. 10 t/h with screen perforation 50 mm Ø Inlet cross-section: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor flight circle: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) positive inserts, 80 x 80 x 45 mm on tool holders Rotor Bearing: Pillow Block Bearing Rotor body: hardfaced (wear protection) Water spraying funnel: flat jet nozzles, à 3 l/min at 3 bar Screen design: solid screen basket, reinforced with ribs, with screen quick-change device Counter blade: with cutting gap adjustment and foldable Side walls in the rotor area: replaceable, Hardox material Hopper: 1300 mm high, flared on 4 sides, double-walled with concrete filling, without lid Machine weight: approx. 43,000 kg Control cabinet (loose, for controlling the machine, incl. soft sta ...

Double Head Welding Machine Urban Plastic Window Welding Machine Type: AKS 4110 Year of Make: 2/91 Working length max. 3090 mm Connected load 6.5 kW Operating pressure 8 bar Air requirement per weld 15 l Electronic temperature control Welding level 0 – 300°C Electronic temperature control Welding limitation 35 – 65°C - Heated blade welding bead limitation 2 mm - Welding of 2 corner joints at an angle of 90° in one operation. - Fast and accurate insertion of the profile thanks to the automatic welding head feed. - Automatic weld adaptation to different profile cross-sections - Safety clamping systems that automatically adjust to different profile heights. - Guide elements made of hardened, ground shafts with recirculating ball bushings. Machine dimensions: L 4015 mm x W 1100 mm x H 1840 mm Weight: 790 kg

Welding Machine Urban Plastic Window Welding Machine Type: AKS 3610 Year of manufacture: 2/92 Connected load 2.7 kW Mains voltage 220 V, 50/50 Hz Operating pressure 8 bar Air requirement per weld/stroke 15 l at 6 bar Adjustment range angle 30° - 180° Profile height min. 30 – max. 105 mm Profile width at 90° max. 157 mm Compressed air connection NW 8, 7 bar - Heated blade bead limitation 0.2 mm - Angle welding from 30° - 180° with excellent accuracy. - Above-average welding results of the AKS 3610 for acrylic and foil-coated profiles. - Optimization of the welding result through parallel welding processes. - Individual setting of all welding parameters - Quick change of the outer contour allowances with holding magnets. Machine dimensions: L 770 mm x W 880 mm x H 1500 mm Weight: 320 kg

Wing Attachment Table Dimensions approx. L 2700 mm x W 1300 mm with glazing bead saws right and left Handle drilling unit with 3 drills Automatic screwdriver Lock box milling machine Drill bits for corner trestles Good, ready-to-use condition.

- Battenfeld TM3500 / 1900 BJ 2002 or 2001 control B4 without robot for sale. - The machine is currently running in production, no defects.

Ref. №: 4230 Washing machine for plastic boxes Plastic boxes with dimensions 600х400х100-320 mm Voltage: 400V, 50 Hz, 3 Ph/ zero / ground Total power: 24,0 kW Power circulating pump: 5,5 kW Machine dimensions Length: 345 сm (with flatnesses input/output) Width: 95 cm Height: 162 сm

Year: 2009 - technically efficient, ready to work – after full service - pneumatic clamps - cutting at 45° - two cutting discs: 225 mm + two scoring blades - measuring slider

Single Head Corner Welding Machine

Rotox Water Slot Mill

Key data: 1500 kN, 359 g/PS, 50 mm

Year of construction 2011 + 2012 Clamping force: 150 tons. Screw diameter 50 mm Injection weight PS: 359 g Injection pressure: 2000 bar tie bar distance: 520 x 520 mm Machines are in good condition, and still in production

Injection molding machine Haitian Zerres ZE600 built in 2019 and MB Conveyors conveyor belt from 2015.

Key data: 220 kN, 27 g/PS, 22 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: DR. BOY Type: 22 D Year of Make: 1999 Clamping force: 22 tons Tiebar spacing: 254 x 254 mm Installation height MIN, / MAX. 200 / 400 mm Screws DN: 22 mm Moulded part weight 27 g/hp

Key data: 220 kN, 27 g/PS, 22 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: DR. BOY Type: 22 D Year of Make: 2004 Clamping force: 22 tons Tiebar spacing: 254 x 254 mm Installation height MIN, / MAX. 200 / 400 mm Screws DN: 22 mm Moulded part weight 27 g/hp

Key data: 1400 kN, 139 g/PS, 35 mm

1.0 St. gebr. Injection Molding Machine with Robot, Machine comes from cleanroom production Manufacturer: ENGEL Type: VICTORY 330/140 TECH Year of Make: 2011 Clamping force: 140 tons Spar spacing: SPARLESS Screws DN: 35 mm Max. displacement: 154 ccm³ Moulded part weight 139 g/hp Control: CC200 Equipment: -Robot, manufacturer: Engel, type: V12 -2 x Core Pull -Blow-out valve -16 hot runner control zones -Protective fence -Conveyor belt

Year: 2006 - technically efficient, ready to work – after full service - flash limit: 2 mm - angle range: 30-180 degrees - large heater - side supports - air preparation station

Mosca strapping machine, type RO MP 4, year 2004, 5 mm bandwith, arch size 60 x 80 cm

2 x Injection moulding machines Engel VC 2460/180 tech BJ 2023

Mosca strapping machine, ROM Fusion, year 2017, arch size 50 x 60 cm, 5 mm PP strap, good running condition

In need of repair - temperature controller defective! Single Head Welding Machine Technical data: heated blades, welding bead limitation 0.2 mm, optimisation of the welding result by means of parallel thrust welding processes, individual setting of the welding parameters, quick change of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/stroke, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, mains voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg.

Key data: 500 kN

Clamping force: 500 kN Clamping plate: 540 x 540 mm Tool opening travel: 350 mm Tool installation height min.: 200 mm Opening width: 500 mm Ejector stroke: 100 mm Total weight: approx. 2,300kg

Technical data: heated blades, welding bead limitation 0.2 mm, optimisation of the welding result by means of parallel thrust welding processes, individual setting of the welding parameters, quick change of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/stroke, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, mains voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg.

Double mitre saw Haffner DGS 1873400 for PVC profile blanks Technical data: Built in 1994 Diameter of the saw blades mm 500 2 motors per Kw 2.2 - speed 2800 Cutting length max mm 3400 Cutting length min mm 230 Cutting depth approx. mm 150 Swivel range 45-90 degrees Hydropneumatic saw feed Pneumatic workpiece clamping Control panel with double buttons 2 suction nozzles diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Glazing bead saw: Sawing Units 1 Length of scanning rod 1,500 mm and 3,000 mm Cutting length max 90 mm Diameter saw blade 175 mm Cutting height 25 mm Support length 1,500 mm Main motor 0.5 kW Saw blades fixed 45° For plastics Pneumatic clamps Saw feed manual

Glazing bead saw manufactured in 2024. This ROTOX GLA 401 features simultaneous cutting of 4 glazing beads at 45° and milling of fixing holes. It includes pneumatic material clamping and an electric locking machine cover for enhanced safety. The machine accommodates PVC profiles with a maximum section of 375 × 45 mm and offers a cutting length of up to 260 mm with a length stop. If you are looking to get high-quality cutting capabilities, consider the ROTOX GLA 401 machine we have for sale. Contact us for further details.

Year: 2015 - technically efficient, ready to work – after full service - two pneumatically tiltable beams (retaining and pressing) - through-feed - adjustable height: 500 mm (liftable) - adjustable vertical angle from 0 to 7 degrees - working width: 3500 mm

Injection moulding machine Battenfeld BK T 2500 BJ 1991

Year: 2014 - technically efficient, ready to work – after full service - motor: 2 x 0.75 kW - pneumatic clamping of the strips - discs with undercutting cutters (2 x 250 mm, 2 x 150 mm) - glass simulator – lateral strip support – stepless (adjustable with a crank and counter) adjustment of the simulator position - manual height adjustment of the work table

System for filling yoghurt and quark into round plastic buckets of various sizes and for labelling them with self-adhesive shrink labels. The system consists of a separate filling/capping unit and a labeller. Filler/capper: The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam via a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place. Labeller: Continuous labelling machine for self-adhesive sleeve labels. Suitable for various bucket sizes with a capacity of 1–5 kg., Capacity filler/capper appr.: 450 units/h Based on a 6-litre bucket; depends on con ...

Technical Specifications & Performance Data This plastic mushroom cork capping machine is engineered for precise, repeatable application of plastic mushroom cork closures on glass bottles. Manufactured by Bertolaso, it is suitable for integration into a used bottling line and supports second hand industrial packaging operations focused on beverage production. The machine features a Siemens SIMATIC HMI touch interface for streamlined operation and clear status visualization. Manufacturer: Bertolaso Machine type: Capping machine for plastic mushroom corks Closure compatibility: Plastic mushroom cork Container handling: Glass bottles HMI: Siemens SIMATIC HMI, touch panel On-screen functions: Menu, Manual, Speed, Production, Dosing, Alarm reset Operator controls: Emergency stop and illuminated status indicators Advanced Automation & Control Systems The capper is equipped with a modern automa ...

Used Capping Machine Zalkin CA8/360 NG for plastic screw capsTechnical Specifications & Performance DataThe Zalkin CA8/360 NG is a rotary capping machine engineered for high-speed beverage production and industrial packaging. Configured for plastic screw caps, it delivers reliable torque control and repeatable closure quality for PET bottles.Manufacturer / Model: Zalkin CA8/360 NGYear: 2006Category: Capping Machine (rotary)Production Speed: up to 16,000 bottles/hourNo. of Capping Heads: 8Cap Type: Plastic screw capsCap Size / Finish: 28 mm, 1810 finishBottle Format: 0.75 LContainer Types: PETElectrical: 240 V, 50 ADimensions (W x L x H): 1200 x 1400 x 2300 mmWeight: approx. 2500 kgIncluded: Safety features, manuals availableAdvanced Automation & Control SystemsDesigned for demanding lines, the CA8/360 NG provides precise cap application and consistent torque across all eight heads. An in ...

used Arburg 520C 2000-675, built in 2000 for sale: Machine cycles = 3.6802.856 Pump hours = 46,142 Operating hours automatic = 37,814 Screw diameter = 60 mm Machine with safety fence and with used auxiliary unit, but without conveyor, without hopper and without handling. The machine is currently still connected, a visit would be possible at short notice.