plasma cutting used for sale

A complete plasma cutting system Oerlikon including peripheral equipment is available. 1) CNC plasma cutting system Oxytome 30, year of manufacture: 2008. 2) Plasma source Air Liquide Nertajet HP125, year of manufacture: 2008. 3) Filter unit Donaldson Torit DCE DFPRO 8-Cyclo, year of manufacture: 2008, weight: approx. 1625kg. 4) Cooling unit Air Liquide Friojet-30, year of manufacture: 2008, cooling capacity: 2kW, max. operating pressure: 29.5bar, refrigerant: R407c, weight: 80kg. Documentation available. An on-site inspection is possible.

Agilent 5110 SVDV which YOM 2018 for sale. It's an complete set including chiller, autosampler SPS4 and software.

EWM acticARC Tetrix T352 AC/DC robot TIG/TIG welding machine with cooling unit cool very good condition very little used Shipping within Germany gross 100€.

This Hypertherm Powermax 105 Sync XXL plasma cutting system is offered. Table size X/Y/Z: 2500mm/10000mm. Cutting heads: 3. The system can be inspected under power by arrangement.

Manufacturer: SAF Model: NERTAJET HP120 Year of Manufacture: 2000 Operating hours : 17,901h Features: - Working format: 1500 x 3000 mm (2000 x 3000 mm possible) - Steel: - max. 20 mm at approx. 900 mm/min - 1 mm at approximately 6,500 mm/min - Stainless steel: - max. 15 mm at approx. 700 mm/min - 1 mm at approximately 5,500 mm/min - Aluminum: - max. 20 mm at approx. 800 mm/min - 1 mm at approximately 5,000 mm/min - features a sophisticated extraction system that selectively extracts air only where the burner is operating. Sensors mounted on the rail pneumatically control the dampers in the air duct. (Filter system not included.) - Underwater cutting: The water level in the basin can be lowered or raised at the touch of a button, controlled by a water level sensor and compressed air-operated mechanism, for comfortable cutting. - Flexibility: Allows both wet and dry cutting. - Spare a ...

Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3-0190-60-560-B-S4-SRM50 -Individual components: see photos -Number: 2x drive unit available -Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc.

Cutting nozzle, welding torch, plasma torch, hand arc piercing torch, gouging torch, torch accessories, torch nozzles, cutting nozzles, flame cutting system, torch -Manufacturer: Hypertherm, extensive range of plasma torch accessories unused Ovp -Type/Quantity: see photos / parts list -Ring electrode: iht 6534-1-100 3 pieces -Price/Delivery: complete -Transport dimensions: 360/280/H165 mm -Weight: 3.8 kg

\"The Plasmatreat FG 5001 plasma generator is an industrial piece of equipment designed for surface treatment applications by Openair-Plasma technology. Robust and efficient, it improves the adhesion, cleaning and activation of materials in many industrial processes. This model, offered as is, is a reliable solution for demanding production environments or recommissioning projects. Compact with dimensions of 60 cm long, 80 cm wide and 35 cm high, it can be easily integrated into an existing production line. Its weight of 55 kg is a testament to its solid construction, suitable for intensive industrial use. Designed by the Plasmatreat brand, recognized for its expertise in plasma technologies, the FG 5001 offers an efficient basis for surface treatment operations requiring precision and consistency.\" Auction-ID: A1-44765-302

Rated power: 19 kVA; Rated current: 29 A; No-load voltage: 280 V; Output current adjustment: 30-120 A; Rated output voltage: 128 V; Max cutting thickness: 45 mm; Cyclic duration factor: 60%; Efficiency: 80%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact 6093 Auction-ID: A1-45506-353

Unused Consisting of; 18x Trumpf” TruPlasma VHF 3000-10/40, 18X Trumph” truPlasma Match 1010/40 Auction-ID: A1-43459-31

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095 Auction-ID: A1-45506-349

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094 Auction-ID: A1-45506-350

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094 Auction-ID: A1-45506-351

Rated power: 19 kVA; Rated current: 29 A; No-load voltage: 280 V; Output current adjustment: 30-120 A; Rated output voltage: 128 V; Max cutting thickness: 45 mm; Cyclic duration factor: 60%; Efficiency: 80%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact 6093 Auction-ID: A1-45506-352

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095 Auction-ID: A1-45506-348

With trolley; 5-6 bar; With compressed air connection Auction-ID: A1-45762-118

Plasma generator with trolley 2 swivel castors Support surface: 130 x 116 cm Hall Auction-ID: A1-45762-25

"The Plasmatreat FG 5001 plasma generator is an industrial piece of equipment designed for surface treatment applications by Openair-Plasma technology. Robust and efficient, it improves the adhesion, cleaning and activation of materials in many industrial processes. This model, offered as is, is a reliable solution for demanding production environments or recommissioning projects. Compact with dimensions of 60 cm long, 80 cm wide and 35 cm high, it can be easily integrated into an existing production line. Its weight of 55 kg is a testament to its solid construction, suitable for intensive industrial use. Designed by the Plasmatreat brand, recognized for its expertise in plasma technologies, the FG 5001 offers an efficient basis for surface treatment operations requiring precision and consistency."

Thread cutting power M 2 - M8 Speed: 700 rpm, luf requirement: 750 l/min, pressure 6 - 7 bar, working range extension: 300 - 1900 mm, Afbau parallel arm: stable arm structure made of hard aluminium profile (38x29) Weight: 23 kg, adapter holder: TCS 1 B - incl. 6 safety slip couplings according to your choice year: 2009

Straightening and cutting machine rolling from Coil. used test line please ask us for your special offer.

Technical data: Machine stand, Type 539 Band saw roll diameter 1400 mm Band saw roll width 180 mm Saw blade width max. 200 mm Saw blade length max. 9300 mm Saw blade thickness 1.3 mm Saw blade speed approx. 42 m/sec. Drive power 45 kW, (1500rpm) Cutting feed requires. 22.5 m/min -Incl. electrical equipment, consisting of limit switches for saw blade voltage, path limitation for transverse movement -2 electromechanical width adjustment devices with precision spindle and two-stage special drive - designed for connecting a Fraba digitizer 2800 -2 hydro-pneumatic band saw roller brakes

Thread cutting capacity: M 3 - M 12 Speed: 400 rpm Air demand: 750 l/min Pressure: 6 - 7 bar Extension: 950 mm Standard accessories: Parallel arm Air motor 6 pcs safety slip couplings of your choice guide column with mounting flange Radial boom Maintenance Pneumatic oil for initial filling

Material: Steel Engine: 15 kW Other data and price on inquiry. You can also get the entire system with all components.

Crosscut and miter saws with maximum cutting height of 200 mm stable grey cast iron construction precise ball bushing guide of the tool slide on hardened and ground steel shafts Manual saw feed fast up to 65 ° horizontal MITRE setting and 60 ° vertical for adjustable fixed stops lower blade guard to extractor can be connected Machine mounted on mobile machine base with 1,5 mtr. long rollers left and right left side with scale and stop position slider Technical data: Engine: 400 V / 5.0 kW Speed: 2800 RPM Cutting length: 420 mm (at 90 °) Cutting height: 200 mm (at 90 °) Miter range horizontal: 45°-90° - 20 ° Miter range vertical: 60° - 90°-30° Saw blade diameter: 520 mm Dust nozzle: 100 mm Weight: 490 kg

Weight 1750 kg Length x Width x Height 1800 mm x 1350 mm x 3000 mm Machine data: rotor diameter - knife circle : 500 mm length rotor : 630 mm angular speed rotor : appr. 650 min-1 after-run duration : appr. 60 sec. motor power - depent of order: 37 kW / 1500 min-1 45 kW / 1500 min-1 idle power :appr. 30 - 40 % of nominal power. Very good condition, ready to work. You can also get the entire system with all components.

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

; operational

Cutting cutter Kjellberg-Eberle - used Type: SII20 Machine No.: 1331 - 220 V, 50 Hz, 2.5 kVA, IP 31 - on 04.02.1990 a new control system (NS 3003) was installed by Etek - Built in 1974 - 4 burners - Table dimensions: 6m x 2.50m - Total area: 6m x 5.5m x 2.4m In good condition!

Sheet: 3000x 1500mm Laser: 4000w Auto pallet changer / Extraction

AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices. composed by 3 working units : 1- Cutting unit circular saw diam. mm.350 motor power hp 3 2- Boring unit boring head with 5 / 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage volt. 380/50

very well preserved, fully reconditioned MAZAK laser machines with 1500W Table format: 2500 x 1250 mm minimal footprint by 2, 6 m x 6, 5 m Small part conveyor completely encapsulated engine cover FE: up to 12mm VA: up to 6mm Plastic can incl. software including warranty incl. extraction incl. commissioning + training

Working width: 820 mm rotor flight circle: Ø 720 mm drive: 90 kW cutting system: 8 cutting blades equipment: mechanical adjustment of the cutting gap Machine weight: 3500 kg

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

Bread cutting machine with cutting width adjustment of Wäbama type Circumat.The machine runs without oiling, with round knife and digital control.Suitable to cut breads up to 38cm wide.Right tray is inserted then the loaves are moved by means of sliders to the left Pushed. In the middle between left and right tray the knife rotates and cuts the bread in the desired thick. The cut discs are pushed into the left compartment where they are straightened medium disc holders. After cutting, mam can take out the slices and bag them on the icing rail. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Wabäma Circumat Bread Cutting Machine Circular knife machine Cutting width adjustable Current type three-phase current Operating voltage 400V Control voltage 24 volts Rated current of the machine 1.9 A Insurance in the supply line  ...

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

Working width: 2000 mm rotor flight circle: Ø 1000 mm drive: up to 315 kW cutting system: 40 piece cutting bars facilities: counter knife traverse pivoting hydraulically Right-left operation Hydraulic hood opening Screen: hydraulically extendible

According to the description below

3000 x 1500mm Year: 2004 Cutting hours: 21,350 Turbo: 37,990 With Byloader / Pallet change

Die Cutting Machine Unitec T1060 Die Cutting Machine Unitec T1060 The T1060 automatic machine with or whithout stripping is used to diecutting and creasing paper, cardboard and corrugated and operations for cardboard boxes, paper labels and especially for delicate printing jobs such as cigarette packages, wine, gifts and cosmetics, etc. This machine works automatically throughout its process, with a user-friendly interface to control the cutting speed, number of sheets cut, total operating hours and its working status, as well as to dynamically control the PLC inputs and outputs, and malfunctions to facilitate operation control and troubleshooting. In addition, the machine also features self-testing (e.g., double sheets, missing sheets, accumulated sheets, or fallen sheet detection) and continuous process sampling, while providing you with a solid cutting and accuracy registr ...

New machine 24-month warranty Benefits: + TOP value for money + Horizontal cutting machine, ideal for hamburger buns / rolls & cake bottoms + also suitable for cutting /halving baguettes, flatbreads, white breads + Products are guided with conveyor belt to the cutting station + comes with 3 cutting knives, double and triple cutting possible + Adjust cutting height in 5 mm increments + Machine on a robust, mobile frame, with locking wheels + equipped with two safety protective grilles + with upper transport/feeding belt + Tape speed can be controlled by rotary knob, for optimal adjustment of cutting results + with cleaning brushes on the conveyor belt + with quick coupling for belt cleaning + with pull-out collecting plate on the output belt + fast spare parts supply within 1-2 business days Technical data: - max product height: 90 mm - Bandwidth: 405 mm - Band spe ...

Waterjet 2x3m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Used pumps either Knam/H2O 40HP alternative KMT/Ingersollrand SL4 30hp completely overhauled. New surcharge KMT SL5 classic 50PS/37KW 90.000,00 Construction training & service directly from the manufacturer, including

Bread cutting machine Rösen & Robbert SPA 38 used sickle knife bread cutting machine with adjustable cutting width for breads up to 38cm long suitable for cutting and halving dark breads.Used bread cutting machine with cutting width adjustment of Rösen & Robbert type SPA 38.The machine runs with oiling, with sickle knife and digital steurung.Geignet to cut breads up to 38cm wide.Right compartment is inserted bread then the bread is inserted to the left. In the middle between left and right compartment, the knife rotates and cuts the bread in the desired thickness. The slices are pushed into the left compartment where they are just selected mid-disc holders. After cutting, mam can take out the slices and bag it on the tray. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Bread cutting machine R&R Type: SPA 38 for loaves up  ...

VESPA 30/60/18.5 VGA Cutting mill for plastics 18.5 KW, 200-300 kg/h. Insertion opening mm: 620×400 Rotor diameter mm: 300 Throughput kg/h: 200-300 Rotor blade quantity/mm: 6 x 300 Stator knife quantity/mm: 4 x 300 Engine KW: 18,5 Dimensions mm: 1210×1000×1925 Weight kg: 1500 options: Material conveying blower 4.0 kW and Big Bag filling station. Soundproofing can also be ordered at an additional cost. VESPA Granulators for Plastics – Soundproof insertion opening for minimal noise level and easy feeding with multiple alternative feed options – Horizontally or diagonally separated housing with robust welded steel construction – The cutting rotor rotates in an extremely robust self-aligning roller bearing, which is arranged in the bearing housing outside the cutting chamber. – Easy access to the knives. Knife made of high-quality tool steel with pre ...

Waterjet 1x2m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Knam/H2O pump 22 HP. 65.000,00 Construction training & service directly from the manufacturer, including

VESPA 45/80/37 kWt VGA Cutting mill for plastics 37 KW, 400-700 kg. Model VESPA 45/80/37 kWt VGA Throughput Kg/h: 400-700 Rotor diameter мм: 450 Rotor knife quantity/dimensions piece x mm: 6×400 Stator Knife Quantity/Dimensions Piece x mm: 4×400 Engine kW: 37 Weight Kg: 2300 VESPA Granulators for Plastics – Soundproof insertion opening for minimal noise level and easy feeding with multiple alternative feed options – Horizontally or diagonally separated housing with robust welded steel construction – The cutting rotor rotates in an extremely robust self-aligning roller bearing, which is arranged in the bearing housing outside the cutting chamber. – Easy access to the knives. Knife made of high-quality tool steel with precision machining and surface finish – Good accessibility for cleaning and maintenance – Electrical equipment with SCHNEIDER ELEC ...

Granulator especially designed for inline size reduction of thin film (like BOPP / BOPET). Feeding via roller feeder. Extreme througput rate ! brand: NEUE HERBOLD made in germany - heavy duty model - drive 250 kW - size reduction of film - feeding via roller feeder - Rotor diameter: 800 mm - working width: 1950 mm - for very high throuput rates for the size reduction of film, tangled or bunched tapes and bands, PP big bags, crates or other hollow containers, BOPP / BOPET / PP in-line and off-line film extrusion lines.

Cutting mill for high demands in a compact class. The mill is ideal for grinding small quantities. In production, there are always surpluses, missing parts. These recyclable materials can flow back into production, so that manufacturing costs can be optimized and reduced. Cutting mill VESPA 18/32/5.5 kW VGA for plastics, cable 5.5 KW, 60-80 kg/h. Model: VESPA18/32/5.5 kW VGA Throughput Kg/h: 60-80 Rotor diameter мм: 180 Rotor knife quantity/dimensions piece x mm: 6×160 Stator Knife Quantity/Dimensions Piece x mm: 4×160 Motor kW: 5.5 Weight Kg: 400 options: With material conveying blower and Big Bag filling station Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc. Dimensions (mm) A 860 B-620 C-1480 D 1250 E 325 F 220

Producer: GRAEF Type: EURO 2560 S Power supply: 230V / 50 Hz Power: 0.3 kW Slicer cutting machine GRAEF type EURO 2560 S Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

MAZAK laser cutting machine STX510 MKIII 4kW TOP CONDITION - LIKE NEW - ONLY 700 RUNNING HOURS year: 2012 refurbished, MAZAK lasercutting machine with 2500W table size: 3000mm x 1500mm machine dimension 2,9m x 7,3m chip conveyor LAN / USB connection automatic nozzle change fast piercing in heavy materials piercing sensor plasma sensor for stainless steel cutting burning sensor for mild stelle cutting full covered machine table FE: 22mm VA: 15mm ALMG: 10mm plastics possible to cut incl. software incl. exhauster option: warranty, setup, training option: fully automatic loading/unloading CELL system

Index Cutting Machine Hunkeler Model RE32 Year 1975 Capacity up to 8 mm Tool width up to 320 mm Tools 1 straight angle tool with a small radius is included (R=1,5 or R=2mm?) Details machine has undergone a electrical and mechanical modification to ensure a safer working Available direct