plasma cutting used for sale

Laser Engraving Machine Specifications: Powerful 60W Laser engraving machine with autofocus, hepa filter installation (separate) and a worktop of 950x460mm. Worktop can be extended by the doors at the front and rear. For engraving and cutting many materials and laser marking metals. 230V. Features: Complete with rotary attachment, honeycomb blade. Particularities: Machine is in very good condition and well maintained. Auction-ID: A1-47362-112

Auction-ID: A3-46134-5660

Art-No. 967649101 for Husqvarna Rider R420 TsX AWD New, has not been used yet Auction-ID: A1-50452-15

Cutting plotter for cutting foils and paper. Machine is in very good condition and well maintained. With collection tray. 230V Auction-ID: A1-47362-111

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Arntz Blue Line saw blade Length: 5800 mm Specification: 41 x 1.3 mm 2/3 K Carbide band saw blades with pre-cutting and post-cutting geometry for machining non-ferrous metals and graphite. The specialist for: - Aluminium alloys - Aluminium bronzes - Copper alloys - Sand-cast aluminium and magnesium castings - Graphite

2018 Kronen KUJ cube, strip and slice cutting machine – used, Cube, strip and slice cutting machine with infeed conveyor for vegetable and fruit processing., This KUJ is a used cutting machine from Kronen, built in 2018 in Kehl, Germany. It cuts cubes, strips and slices and is made of stainless steel. An inclined cleated infeed conveyor with a wide loading hopper carries the product up to the cutting unit. The cutting unit stands on swivel castors, so it can be moved between workstations, while the conveyor rests on adjustable feet. An emergency stop is fitted at the side of the conveyor., Located in Emmeloord, the Netherlands. Available immediately – price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/kronen-kuj-2/, Machine type: Cube, strip and slice cutting machine, Condition: Used, Cutting types: Cubes, strips and slices, Infeed: Inclined cleate ...

Standard configuration Machine ⦁ Working Range 6000 x 2500 mm ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Automatic pallet changer lengthwise installation ⦁ Motion unit for high precision processing ⦁ Gantry drive in combination with direct linear drives ⦁ Chiller for machine cooling ⦁ Integrated cabinets ⦁ Wide longitudinal conveyor ⦁ Work area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine ⦁ Automatic nozzle cleaning TRUMPF Laser ⦁ External Solid-state laser TruDisk 3001 with 1 fiber optic cable laser output ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting unit ⦁ One cutting head strategy ⦁ Protection glass to avoid lens contamination Control ⦁ Sinumerik 840D SL ⦁ ControlLine ⦁ Easy shop floor programming ⦁ Fast post production ⦁ 19 To ...

Standard configuration Machine ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Automatic pallet changer lengthwise installation ⦁ Torque drive in combination with direct linear drives ⦁ Enclosed beam delivery via fiber optic cable ⦁ Chiller for machine cooling (water-air) ⦁ Integrated eletrical cabinets with inside light ⦁ Power supply TruDisk via the machine ⦁ Longitudinal conveyor ⦁ Working area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine ⦁ Automatic nozzle cleaning TRUMPF Laser ⦁ Solid state laser TruDisk 3001 with 1 LLK output ⦁ Fiber optic cable according standard layout (laser next to the machine) ⦁ Laser chiller unit (water-air) ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting head with complete adaptive lense system ⦁ One cutting head stra ...

Standard configuration Machine ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Chiller ⦁ Automatic pallet changer lengthwise installation ⦁ Enclosed beam delivery via laser light cable ⦁ Integrated electrical cabinets with inside light ⦁ Ergonomic control panel with Touchscreen ⦁ Work area lighting ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine ⦁ Automatic nozzle cleaning TRUMPF lasers ⦁ External solid state laser TruDisk 3001 with 1 fiber optic cable laser output ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting unit ⦁ One cutting head strategy ⦁ Protection glass to avoid lens contamination ⦁ Online protection glass monitoring ⦁ ControlLine Control ⦁ Easy shop floor programming � ...

Standard Configuration Machine ⦁ Working area: 3000 x 1500 mm ⦁ Box frame ⦁ Process cooler for machine and laser (water/air) ⦁ Longitudinal conveyor belt ⦁ Work area illumination ⦁ Pilot laser ⦁ Spraying equipment ⦁ Automatic nozzle cleaning ⦁ Gantry drive in combination with linear direct drives ⦁ Integrated electrical cabinets ⦁ Integrated cabinet ⦁ Closed beam guidance via laser light cable (LLK) ⦁ Machine status light ⦁ Machine environment temperature +5°C to 35°C TRUMPF laser ⦁ Excitation using pump diodes ⦁ Laser power control Cutting unit ⦁ Single cutting head strategy ⦁ Protective glass ⦁ Online condition checking of protective glass ⦁ Universal cutting unit with fully adaptive lens system Control ⦁ Quick post-production ⦁ SINUMERIK 840D SL control ⦁ Ergonomic control panel with 21.5 wide-screen multi-touch color display ⦁ In ...

Standard configuration Machine ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Chiller ⦁ Automatic pallet changer lengthwise installation ⦁ Enclosed beam delivery via laser light cable ⦁ Integrated electrical cabinets with inside light ⦁ Ergonomic control panel with Touchscreen ⦁ Work area lighting ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ Automatic nozzle cleaning TRUMPF lasers ⦁ External solid state laser TruDisk 3001 with 1 fiber optic cable laser output ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting unit ⦁ One cutting head strategy ⦁ Protection glass to avoid lens contamination ⦁ Online protection glass monitoring ⦁ ControlLine Control ⦁ Easy shop floor programming ⦁ Fast post pro ...

Standard configuration Machine ⦁ Closed machine frame with integrated laser unit ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Enclosed beam delivery system ⦁ Single cutting head strategy ⦁ Chiller ⦁ Automatic pallet changer in longitudinal direction ⦁ Conveyor belt for small parts / slug ⦁ 17 Touch screen ⦁ Work area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine TRUMPF Laser ⦁ CO2 laser TruFlow 5000 with optimized standby ⦁ Maintenance-free radial turbine blower ⦁ Radio-frequency excitation ⦁ Laser control TASC ⦁ Laser power control ⦁ Logbook function laser Cutting head ⦁ LensLine with status check ⦁ Lens cutting head with 250mm focal length ⦁ Universal quickchange device for cutting head (UTI) ⦁ ControlLine: automatic heig ...

Standard configuration ⦁ Solid-state laser TruDisk 3001 with air-cooled chiller and pilot laser (switch) ⦁ LLK with 100 µm ⦁ Focusline ⦁ Optics recognition and magnetic coupling ⦁ Sinumerik 840D control system: Open control on PC basis ⦁ Fixed suspending control panel ⦁ Teach panel with teach software Additional equipment ⦁ Laser cutting: including 2 cutting gases (02, N2), APC distance control, programmable cutting gas selection, adjustment device, analogue value cutting, pressure adjustment, valves ⦁ Dynamic cutting optics f = 150 mm incl. sensor ⦁ FastLine Cell ⦁ LLK 30 m ⦁ Special suction unit

Standard configuration Machine ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Chiller ⦁ Automatic pallet changer lengthwise installation ⦁ Enclosed beam delivery via laser light cable ⦁ Integrated electrical cabinets with inside light ⦁ Ergonomic control panel with Touchscreen ⦁ Work area lighting ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ Automatic nozzle cleaning TRUMPF lasers ⦁ External solid state laser TruDisk 3001 with 1 fiber optic cable laser output ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting unit ⦁ One cutting head strategy ⦁ Protection glass to avoid lens contamination ⦁ Online protection glass monitoring ⦁ ControlLine Control ⦁ Easy shop floor programming ⦁ Fast post pro ...

Standard configuration Machine ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Chiller ⦁ Automatic pallet changer lengthwise installation ⦁ Enclosed beam delivery via laser light cable ⦁ Integrated electrical cabinets with inside light ⦁ Ergonomic control panel with Touchscreen ⦁ Work area lighting ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ Automatic nozzle cleaning TRUMPF lasers ⦁ External solid state laser TruDisk 3001 with 1 fiber optic cable laser output ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting unit ⦁ One cutting head strategy ⦁ Protection glass to avoid lens contamination ⦁ Online protection glass monitoring ⦁ ControlLine Control ⦁ Easy shop floor programming ⦁ Fast post pro ...

Standard configuration Machine ⦁ Closed machine frame with integrated laser unit ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Enclosed beam delivery system ⦁ Single cutting head strategy ⦁ Chiller ⦁ Automatic pallet changer in longitudinal direction ⦁ Conveyor belt for small parts / slug ⦁ 19 Touch screen ⦁ Work area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine TRUMPF Laser ⦁ CO2 laser TruFlow 5000 with optimized standby ⦁ Maintenance-free radial turbine blower ⦁ Radio-frequency excitation ⦁ Laser control TASC ⦁ Laser power control ⦁ Logbook function laser Cutting head ⦁ LensLine with status check ⦁ Lens cutting head with 250mm focal length ⦁ Universal quickchange device for cutting head (UTI) ⦁ ControlLine: automatic heig ...

Standard configuration Machine · Closed machine frame with integrated laser unit · Torque drive in combination with direct linear drives · Enclosed beam delivery via fiber optic cable · Chiller for machine cooling (water-air) · Integrated eletrical cabinets with inside light · Automatic pallet changer lengthwise installation · Wide longitudinal conveyor · Power supply TruDisk via the machine · Working area lighting · Positioning laser diode · Spray device · PierceLine · FocusLine · NitroLine · PlasmaLine · Automatic nozzle cleaning TRUMPF Laser · Solid state laser TruDisk 3001 with 1 fiber optic cable laser output · Fiber optic cable according standard layout · Laser chiller unit (water-air) · Stimulation via pump diodes · Laser power control · Logbook function Laser Cutting head · Universal Cutting head with complete adaptive lense system · Protection glass t ...

Standard configuration Machine ⦁ Closed machine frame with integrated laser unit ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Enclosed beam delivery system ⦁ One cutting head strategy ⦁ Chiller ⦁ Automatic pallet changer, lengthwise installation ⦁ Longitudinal conveyor ⦁ Ergonomic control panel with Touchscreen ⦁ Working area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ PlasmaLine Trumpf Laser ⦁ CO2-Laser TruFlow 3200 with optimized standby Modus ⦁ Maintenance-free radial turbine blower ⦁ Radio-frequency excitation ⦁ Laser control TASC 3 ⦁ Laser power control ⦁ Logbook function Laser Laser cutting head ⦁ Laser cutting head with 250 mm lens ⦁ Universal quick-change device (UTI) incl. bus connection ⦁ LensLine ⦁ ControlLine: Height regulation and sh ...

Standard configuration Machine ⦁ Working range: 4000 × 2000 mm ⦁ Box frame ⦁ Longitudinal conveyor belt ⦁ Motion unit for high-precision processing ⦁ Gantry drive in combination with linear direct drives ⦁ Process cooler for machine and laser (water/air) ⦁ Work area illumination ⦁ Pilot laser ⦁ Spraying equipment ⦁ Automatic nozzle cleaning ⦁ Integrated electrical cabinets ⦁ Integrated cabinet ⦁ Closed beam guidance via laser light cable (LLK) ⦁ Machine status light TRUMPF laser ⦁ Excitation using pump diodes ⦁ Laser power control Cutting unit ⦁ Single cutting head strategy ⦁ Universal cutting unit with adaptive lens system ⦁ Protective glass ⦁ Online condition checking of protective glass ⦁ Automatic nozzle centering Control ⦁ Quick post-production ⦁ SINUMERIK control ⦁ Ergonomic control panel with 21.5 wide-screen multi-touch color  ...