plasma cutting used for sale

Longitudinal cut-to-length line for the sheet metal industry 1,500 x 1.5 mm Belt width 1,500 mm Band thickness 0.4 -1.5 mm Longitudinal sections 3 Coil weight 3,000 kg# Speed 15 m/min. 3 unwinders Machine very well maintained, immediately ready for use, ex site

Kullenschneidemesser 3 pcs NEW!  Kullen cutting knife, double-sharpMade of stainless steel1 side sharp cutting edge and 1 side serrated cutting edgeEnglish style3 piecesNo. 1817/DW/12Total length 44 cm See picture for details

Kullenschneidemesser 3 pcs NEW! Â Kullen cutting knife, double sharpMade of stainless steelTotal length about 44 cm1 side sharp cutting edgeAnd 1 side wave bladeEnglish style3 piecesNo. 1817/12Â See picture for details

This 3-axis TRUMPF TruLaser 5030 was manufactured in 2012. It features a powerful 6,000 W laser and is equipped with a HANDTE MF-L 2000 extraction system. The machine has been completely freshly serviced and has a total of 20,118 laser hours. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 CO2 laser cutting machine we have for sale. Contact us for further details.

Shaft Cutting Knife No. 1815-12 3 pieces NEW!  Shaft cutting knife 3 piecesNo. 1815-12Stainless steel, full length 44 cm,  Only with hollows, other side blunt Details see picture

Baker's Knife/Cutting Knife No. 1873-12-H 3 pieces NEW!  Baker's knife/cutting knife, wide blade, extra strong3 piecesNo. 1873-12-HRostfrei, total length 45 cm  Details see picture

A CNC 10 axis pipe cutting system HGG including a plasma source Kjellberg HiFocus 280i is available. Pipe diameter range: 30mm-330mm, max. pipe load: 20kN, max. pipe length: 13000mm, max. workpiece weight: 2000kg, max. cutting angle: 70°, max. plasma cutting current: 280A. Documentation available. An on site inspection is possible.

A CNC dual-head waterjet cutting system Bystronic is available. Working dimensions X/Y/Z: 4000mm/2250mm/230mm, cutting heads: 2, max. cutting carriage distance: 1150mm, simultaneous movement: 84m/min, machine tolerance: +/-0.1mm, repeatability: +/-0.05mm, max. frame load capacity: 7000kg, max. workpiece weight: 6300kg, max. round part diameter and length: 440mm/3700mm, max. operating pressure: 3800bar. Machine dimensions X/Y/Z: approx. 9000mm/7550mm/2050mm, weight: approx. 10000kg, operating hours: approx. 41130h, cutting hours head 1/head 2: 13720h/956h. The second head was removed and the cutting unit was mounted on head 1 as a spare part. However, after procurement of a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. Including a desalination system and all spare parts. Documentation available. An on-site inspection is possible.

Year of manufacturing: 2009 19? Monitor and Programm Side-table left with Air Side-table right with Air Air Table Photocells

This 3-axis PHENIX MD JET 1530 was manufactured in 2021. It features a spacious 1500 x 3000 mm table and a powerful 30HP hyperthermal pump capable of 4100 bar pressure. The machine has 1290 hours of operation and includes essential components such as a pump, tank, filter drain, and a salt softener. If you are looking to get high-quality waterjet cutting capabilities, consider the PHENIX MD JET 1530 machine we have for sale. Contact us for further details.

Cutting center Type: TS 90 Manufacturer: Macmazza Year: 2019 Cutting length: 4300 mm Effective Cutting Height: 72 mm Motor power: 10 – 20 hp Main blade diameter: 220–325 mm Weight: 3500 Kg Dust extraction hood diameter: 2×120 mm 2×100 mm Saw carriage advance speed: 3-50 m/min Saw carriage return speed: 30-120 m/min Pusher speed: 2-25 m/min Pusher return speed: 25-70 m/min Suctions: 4000 m³/h 2500 N/m² Label printer Machine in good condition, under power Find more here - / Contact us at -

Cutting dimensions X/Y: 2000mm/3000mm, Z-axis stroke: 230mm, machine tolerance: +/-0.05mm/m, repeatability: +/-0.025mm/m, simultaneous movement: 56m/min, max. cutting speed: 30m/min, max. material thickness: 200mm, max. load capacity: 790kg/m², max. workpiece weight: 4740mm, max. clamping material thickness: 50mm, max. pump pressure: 3800bar, max. working pressure: 3600bar, machine weight: approx. 11300kg, working hours: 18111h. Documentation available. An on-site inspection is possible.

Adige LT5 Fiber with 6.5m bundler loader and 4.5m discharge equipped as follows: 4.5m finished parts collection table Rear scrap conveyor 1KW IPG fiber laser Chiller Extractor Weld seam detector

Air table Side Table Programm Spare knife

Air table Side Table TFT Monitor Programm Spare knife

Hello, for sale is a very good used wire EDM machine of the brand Fanuc Robocut Alpha C400iC. The EDM machine has only 3288 operating hours and is from the year 12/2021. The Fanuc is still energized and is available at short notice. Prior sale and errors excepted.

Rondo Rondolino ZGM635. A Dough Processing Machine Pastry Plant - Manufacturer: Rondo - Type: ZGM635. A + SFT370A - Compact pastry line with cutting station + guillotine - Ideally suited for small bakery - with croissant cutting roller - With mobile table for croissant wrapping machines / croissant wrapping machines - Belt width 64cm External dimensions: Length 380cm Width 110cm Height 186cm

An ultrasonic cutting machine is offered. 180mm full-wave titanium blade, cutting shapes: rectangular, triangular, diamond-shaped, round products, sheet dimensions X/Y: min. 300mm/200mm max. 600mm/400mm, round products: min. 220mm max. 260mm, cutting height max.: 120mm, production capacity: approx. 120sheets/h, integrated cleaning station and drying function. Inspection possible by appointment.

- Touch Screen Monitor - air table - side air table, left/right - air corners - Autotrim - Baumann Multistapler BA N - Spare knife

Herlitzius A2000 continuous bread slicer - Continuous bread slicer - Manufacturer: Herlitzius - Type: A2000 - Adjustable cutting width Technical data: - Voltage: 400 volts - Control voltage: 24 volts - Connected load: 2.5 kW - 50Hz

Polar 76EM year: 1992 cuttingwidth: 76 cm Chromed air table side table left&right digital program 99 photocells widia knife

Tip height: 125 mm Center width: 800 mm Gr. turning Ø over bed/over carriage guide: 280/245 mm Spindle holder, thread according to DIN 800 Spindle bore: 24 mm Spindle speeds infinitely adjustable: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 Inch Thread: 4 - 112 Gg/" electr. Connection: 380 V, 0.7/1.4 kW Space requirements: Weight approx.: 500 kg

Tip height: 150 mm Center width: 760 mm Swivel Ø over bed/support slide: 300/165 mm Spindle bore: 32 mm Spindle holder, short taper according to DIN 55027: Gr. 5 Tailstock quill taper: MK 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 Inch Thread: 75 - 2.5 Gg/" 19 module threads: 0.1 - 1.75 module 19 Diametrical Pitch Thread: 70 - 4 DP electr. Drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Space requirement: 1800 x 770 x 1300 mm

A CO2 laser cutting and marking machine Eurolaser, which was used for acrylic glass, is available. Laser power: 200W, working dimensions X/Y: 2270mm/1600mm, max. cutting width: 2200mm, material feed width: 2350mm, table feed-through height range: 58mm-80mm, engraving resolution: 1200dpi, grayscale levels: 256, material processing: films/textiles/plastics/composite materials/paper/thin wood. Machine dimensions X/Y/Z: approx. 4000mm/2350mm/1600mm, weight: approx. 2000kg. The laser source was renewed in 2021. Documentation available. An on-site inspection is possible.

STM 1530 PremiumCut 3D 12° Hours: 3200 Year of manufacture: 2018 Working area: 3002 x 1502 x 300 mm Pump: BFT ECOTRON® 40.37 (37 kW, 4000 bar) Including professional dismantling, transport and commissioning within Germany

Horizon T61 year: 1999 cutting width: 61 cm light curtain digital display with programs and numeric keypad

Laser Cutting Machine Manufacturer: Eurolaser Type: LCS XL-1600 Year of Make: 2010 Power: 200 W Working area: 2,270 mm x 1,600 mm Electrical data: max. 6 kW / max. 32 A Previous area of application: Cutting acrylic glass Laser source was renewed 5 years ago

Ideal 3915-95 Year: 1996 cutting width: 390 mm pile heifht: 40 mm Electric cutting manual size change manual clamping

A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible.

This machine is designed for cutting stacks of paper to a specific size. Cutting length: 475 mm Insertion depth: 458 mm Width x Depth x Height: 762 x 1053x1296 mm Good condition

MHS Ideal SB Year of manufacture 2019, from dissolved Real Markt Machine is in good condition, but should be thoroughly cleaned before use. Three different cutting thicknesses can be set. Ideal for the self-service area in the store. Voltage: 230V Dimensions: 95x72x128H Weight: 190kg Power: 1000W Video about test run available

Key data: 1550 mm, 3 mm, 120 1/min

Qty. 1 Second-hand rotary shear cut-to-length line – still in operation Mfc.: PACO E.N.G Built: 2010 Still in operation! Raw Material: CR, EGI, GI, STS, AL, COLOR COATING COILS Tensile Strength Max.: 60 kg/mm2 Strip Width: 300 ~ 1,550 mm Thickness: 0.2 ~ 3.0 mm Coil Weight: 20,000 kg Sheet Length No. 1 Piler: 300 - 2,500 mm No. 2 Piler: 300 ~ 2,500 mm Piling Weight No. 1 Piler: 5,000 kg No. 2 Piler: 5,000 kg Coil ID: ∅508 mm, ∅610 mm = RUBBER SLEEVE Coil OD: ∅800 mm ~ Max. ∅2,000 mm

Manufacturer:Lisec Model: VB-33 Year of Manufacture: 2011 Type of Machine : Cutting Machine for Laminated Glass Weight: 2,200 kg Connected load: 17.00 kVA Power supply: 3/N/PE – 50 Hz – 400 V AC/DC supply: 400 V / 24 V Max. pressure: 6.00 bar Max. load: 43 kg/m² Certification: CE Find more here - / Contact us at -

double wire processing diameter range 0,8-2 mm cutting length 1000 mm speed - meters/min 80

diameter range 4-10 mm cutting length 3000 mm speed - meters/min 130

Inv. Num. : 9030 Type: EM80 Producer: ADIGE Created: 2015 Parameters: Control system: SIEMENS Switch-on hours: 37558 h Hours: 26407 h Machine weight: 8500 kg The machine is designed to process steel tubes with a length of 20–600 mm and a diameter of 20–80 mm.

diameter range 7-14 mm cutting length 3000 mm speed - meters/min 90

diameter range 5-13 mm cutting length 2000 mm speed - meters/min 21 - 90

A complete cheese cutting and portioning line with one slicer, one scale and conveyor units is available. Products: meat/cheese/sausage/vegan products, slice thickness range: 0.1mm-5mm, max. product length: 1200mm, max. cutting width: 360mm, blade type: circular blade, blade diameter: 460mm, cutting angle: 22°, max. weighing capacity: 100weighings/min, machine dimensions X/Y/Z: approx. 2500mm/1600mm/2300mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible.

diameter range 3-10 mm cutting length 2000 mm speed - meters/min 22-71

diameter range 1-8 mm cutting length 3000 mm speed - meters/min 13-56

flying shears diameter range 8-16 mm cutting length 520-6000 mm speed - meters/min 25-75 diameter range 8-14 mm

diameter range 1,5-7 mm cutting length 2000 mm speed - meters/min 90

wire diameter range 1,5-7,0mm cutting length 3000 mm speed - meters/min 5-120

diameter range 3-10 mm cutting length 2000 mm speed - meters/min 120

Guiding and pulling spindle lathe OPTIMUM "Optiturn 4210 V" With 3 axis digital display Year of Make: 2015 Spindle bore: 54 mm Center width: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm Stepless speed with display With the following accessories: Multifix Tool Holder Coolant Setup Three-jaw chuck 0 200 mm Four-jaw chuck 0 250 mm Collet chuck complete with collets up to 0 32 mm Feed protection Chip protection with lighting Fixed Lynette 0 approx. 150 mm Moving Lynette 0 approx. 100 mm 4 Height Adjustable Machine Shoes 1 pc. Rotating centering tip Operating instructions

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, cutting units from edgebanding machine BRANDT KM 36 -Engines: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220 V / 200 Hz -Pneumatic components: Bosch -Individual components: see photos -Price/Sale: complete -Overall dimensions: 500/560/H670 mm -Weight: 51 kg

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding robot, welding carriage, MIG/MAG welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, rail runner, welding tractor -Oxyfuel cutting system: Oxyfuel cutting machine -Feed rate: adjustable -Dimensions: 460/210/230 mm -Weight: 7.6 kg

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding robot, welding carriage, MIG/MAG welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, rail runner, welding tractor -Oxyfuel cutting system: Oxyfuel cutting machine Features: On/Off switch, without controls or potentiometer -Motor: 180 V/30 W -Dimensions: 580/370/H280 mm -Weight: 17.5 kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full