plasma cutter used for sale

Automatic Cross Cutting Machine MOLEY-PORT® QS The portable sheeter in compact design. For cutting technical textiles. Tabletop model in a modern compact design for cutting small formats. Whether for precision cuts in production or for preparing residual rolls for recycling. ● Electrical equipment according to Euronorm EN 60204/1 ● Lightweight, stable construction (housing in high-strength aluminum construction) ● Working width: 20-500 mm - material guide infinitely adjustable ● Large clearance height for a wide variety of materials ● Flexible use; easy relocation; Easy to maintain ● Dimensions (without storage table and unwinding station): L 650 x W(D) 800 x H 550 mm - Weight: approx. 60 kg ● Electrical connection: 230 V- 50 Hz – 16 A

Chain milling machine on its own stand with various accessory components (b. Chains and Swords)

Manufacturer: TRUMPF Model: TruMatic 7000-1300 Type of machine: Punch and laser cutting combination machine Year of manufacture: 2009 Technical Specifications: - Operating hours, machine: 53,608 h - Operating hours, laser on: 48,375 h - Operating hours, beam on: 9,876 h (as of 23.10.2017) - Laser power: 4000 Watt - Max punching force: approx. 220 kN - Working area, laser operation: approx. 2540 x 1280 mm - Working area, punching operation: approx. 2540 x 1370 mm - Control system: Bosch MTX compact - Max sheet thickness: 8mm - Floor space required: approx. 7950 x 6700 mm - Machine weight: approx. 23,000 kg - Total connected load: 87 kVA Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: BLM Group Adige Model: LT Fiber Type of Machine: Fiber Laser Tube Cutting Machine Year of Manufacture: 2016 Condition: Works well and is currently in production Operating Hours: 37,169 hours Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Trotec Model: SP500 Type of Machine: CO2 Laser (Engraving and Cutting Machine) Year of Manufacture: 2014 Technical Specifications: • Measured 250 watts of power for engraving almost all materials and cutting, for example,up to 20 mm acrylic glass or poplar plywood • Fastest housing laser in its class with a nominal speed of 254 cm/sec • Extra-large work area 1,245 x 710 mm, pass-through for oversized parts • Includes 3 interchangeable worktables for cutting and engraving applications • Includes 5-piece lens set for various applications Maintenance History: • Power supply renewed in 2022 • Laser source refilled in 2026 • Servo motors renewed in 2026 • Maintenance service 2026 Software and Support: Includes operating software and lifetime telephone support. Included Components and Their Function: • Vent500 exhaust system with 2.2 kW / 1,20 ...

Height=1.8 m, Overall length= 1.83 m, Overall width= 1.12 m, Net weight= 762 kg,

Profile steel shears, 80/110, Mas. No. 4423251690035 See photos

Manufacturer: Bordor Year of Manufacture: 2023 Model: P3 Type of Machine: Laser Cutting Machine Laser Source: 6kW Technical Specifications: - Working Area: 3048mm x 1524mm - Max Linkage Speed: 200m/min - Max Acceleration: 4.0G - Table Load Bearing: 1050kg (1-4kw) / 1450kg (more than 6kw) - Machine Overall Dimensions: 8840mm x 2240mm x 2520mm - Overall Weight: plus or minus 6500kg - Z Axis Travel: 350mm - Positioning Accuracy: 0.02mm - Total Power Capacity/Current with 40KW MAX source: 264.6KVA / 402.0A - Total Power Capacity/Current with 30KW MAX source: 204.0KVA / 310.8A - Total Power Capacity/Current with 20KW source: 141.9KVA / 217.1A - Total Power Capacity/Current with 12KW source: 95.1KVA / 144.4A - Total Power Capacity/Current with 6KW source: 60.3KVA / 91.6A - Total Power Capacity/Current with 3KW source: 44.6KVA / 67.7A - Total Power Capacity/Current with 2KW  ...

Manufacturer: Bobst Model: SP 130-ER II Type of Machine: Die Cutting Machine Year of Manufacture: 1997 Technical Specifications: - Sheet Size: 130 x 92 cm - Running Speed: Max. 7200 Sheets/Hour - Condition: Machine to be delivered in running condition - Productivity Sheets on the Machine: approximately 550 million sheets Main Components and Function: - Machine: Platform, removable platform on cylinder for feeder, recent asynchronous main motor, machine raised 650mm - Feeder: Manual non-stop feeder pallet, pile tray with manual lateral correction during production, suction unit with multiple adjustments, head feeder auto-adjustment with bottom pile - Feed Table: Double sheet detection, sheet down-holder guiding the sheets to the front guides, upper frame with manual lifting device, upper transport equipment for paper and cardboard - Platen Press: Complete shaping (cutting, pr ...

Tobacco cutting machine from the company Fly Mak, almost new (2023), hardly running. Adjustable to different cutting sizes from 0.02 mm to 20 mm. There is also a knife sharpening machine. Fpsbmkowdatlo Df Tuok Capacity: approx. 200 kg/hour

consisting mainly of carbide milling cutters in various designs and sizes in very good condition Auction-ID: A7-49089-6

in different designs and sizes with indexable inserts, mainly from the manufacturers SECO, SANDVIK and other indexable insert milling cutters Auction-ID: A7-49089-33

in round design, mainly from the manufacturer SECO Auction-ID: A7-49089-19

in different sizes and designs mixed with taps and normal milling cutters Auction-ID: A7-49089-8

Manufacturer: LMlab Model: Bodor i5 (Laser Welding-405) Type of Machine: Laser Welding Machine Year of Manufacture: 2021 Technical Data: - Work Surface: 1300 x 900 mm - Stroke Length X: 1300 mm - Stroke Length Y: 900 mm - Stroke Length Z: 75 mm - Positioning Accuracy X/Y-axle: 0.03 mm - Repeat Accuracy: 0.02 mm - Max Movement Speed X/Y-axle: 60 m/min - Max Acceleration X/Y-axle: 0.6 G - Load Capacity: 250 kg - Protective Enclosure: Class 1 m. laser safe inspection windows - Laser Effect: 1 kW to 4 kW (step of 1 kW) - Total Power Consumption: 1 kW laser = 16 kW, 2 kW laser = 22 kW, 3 kW laser = 27 kW - Electricity Supply: 3-Phase plus earthing, 400V, 50-60Hz - Total Size (L x B x H): 2.3 x 2.2 x 1.85 m - Automatic alternating shuttles, electric driven, with position control, and with its own separate HMI Usage Data: - First Run Time: 2023-10-23 22:01:36 - Total Run T ...

Manufacturer: Model: Bodor i7 Type of machine: Laser Cutting Machine Year of manufacture: 2021 Technical data: • Work surface: 1500 x 1000 mm • Stroke length X: 1500 mm • Stroke length Y: 1000 mm • Stroke length Z: 75 mm • Positioning accuracy X/Y-axle: 0.03 mm • Repeat accuracy: 0.02 mm • Max. movement speed X/Y-axle: 60 m/min • Max. acceleration X/Y-axle: 0.6 G • Load capacity: 300 kg • Protective enclosure: Class 1 with laser safe inspection windows • Laser effect: 1 kW to 4 kW (step of 1 kW) • Total power consumption: 1 kW laser = 16 kW, 2 kW laser = 22 kW, 3 kW laser = 27 kW • Electricity supply: 3-Phase plus earthing, 400V 50-60Hz • Total size (L x B x H): 2.65 x 2.3 x 1.85 m Find more here - .ucymachines/ Contact us at - sales@ucymachines

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Bystronic Model: ByStar Fiber 4020 Year of manufacture: 2018 Type of Machine : Laser center Total weight: 14250 kg Laser medium: FiberLaser Wavelength: 1060nm - 1080nm Max power cw: 6000 (Fiber 6000, 6kW nitrogen cooled) Cutting head: new advanced cutting head, cut time 5185 hrs and standby time 21753 hrs with this head as of today Available with manipulation machinery: table for sheet feeding, ABB robot, manipulator for automated material takeaway Find more here - .ucymachines/ Contact us at - sales@ucymachines

Perfecta Seypa 115 UC-2 SM Age: Around 1995 Cutting width: 115 cm With Programs Chromed Air Table Chromed Air Side tables Jogging Table 2x Extra knive

YUNNAN 2M6015 Milling Cutter Sharpening Machine Type: Milling cutter sharpening machine Manufacturer: YUNNAN Model: 2M6015 Serial number: 800111 Accurate and adjustable sharpening system Fine adjustment of cutting angles Adjustable worktable Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49922-35

Polar 92 ED Guillotine Age: 2000 Working width: 92 cm With Color Display Programs Chromed Air table Air Side tables Light barrier Extra knives Comes with Polar L-600-W-3 Lift

Roll Splitter Guillotine RGS50 Used machine in good condition, partially overhauled immediately ready for use Year of Make: 2014 Drive power: 15kW Cutting force 2x25to Knife length: 2500mm Max aperture. 1600mm incl. base frame and feed table Work/feed height 1200mm Two-handed operation PLC supported

Perfecta 92 UC High Speed Guillotine Age: 2001 Cutting width: 92 cm Programs Color Display Chromed Air table Chromed Air side tables (Left and Right) Machine comes with 2 extra knife HSS

Roll splitter RGS25 New device, immediately available and ready for use for shredding paper and film rolls. Drive power: 7.5kW Cutting force: 25to Knife length: 1500mm Max. opening: 800 -PLC Siemens S7 -Emergency stop ripcord on both sides -Safety interlock

Wohlenberg 115 Cut-Tec High-speed cutter Age: 1996 Cutting width: 115 cm Chromed Air Table Chromed Side Air Tables Color Display With Baumann Lift NUP 650 Extra knives

Polar N 92 Plus High Speed Cutter Age: 2013 Performance: 45 cycles/min Counter: only 529.438 cuts Working width: 92 cm Equipment: Air Side tables Chromed Air Table 18.5" color display Touch Screen Operation Automatic Programs for a highly automated Process Polar Optiknife Photocells In very good condition 2x extra knife

Wohlenberg 92 MCS-2 TV-2 Age: ca. 1990 Working width: 92 cm With Programs Chromed Air table Side tables Light barrier In good working condition

Letter Press Tiegel - DIE Cutter Heidelberg OHT Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1969 - Serial-No. 171075 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm

2025 generalüberholt Buchdruckzylinder / 2025 complete overhauld Letter Press Cylinder DIE Cutter Heidelberg SBB Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBB >>2025 generalüberholt / 2025 complete overhauld<< Year 1969 - Serial-No. 34364 Size max.: 570 x 820mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 6.200kg3 Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame

Stanztiegel in einem guten Zustand / Letter Press DIE Cutter in good Condition Stanztiegel / Letter Press DIE Cutter Heidelberg GTS Baujahr / Year 1965 - Serial-No. 62990 Size min. 85 x 102mm - max. 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Stanzleistung / Punching Pressure 60T Weight approx. 2250kg Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame

In einem sehr guten Zustand, Letter Press Cylinder DIE Cutter Heidelberg S in good working condition. Stanzzylinder / Automatic DIE-Cutter Cylinder Heidelberg S Serial-No. 13934 Size max. 540 x 720mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame

Length of main pontoon: 10 m. Length of pole truck: 3.5 m. Length of ladder: approx. 15 m. Length of spud poles: 10 m. Draught: 0.7 m. Engine: Volvo penta 210 HP. Transmission: Twindisc freewheel clutch with V-belts. Pump: 10'' (BP2320) Damen (formerly De Groot) Pole truck, ladder and 4x side pontoon included. Special features: Can be used as both a cutter suction dredger and a sand extraction dredger . Auction-ID: A1-49615-14

Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/gasoline mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-50065-400

250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-50065-117

45 cm cutters. Ideal for cutting wires, ropes, cables and bolts. Auction-ID: A7-50066-298

Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/gasoline mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-50066-400

Set of bore hole cutters sizes from 18-30-32-35-55 mm Overall dimensions: 200 x 100 x 100 mm Weight: 1 kg Auction-ID: A7-50208-250

Made from high-quality HSS steel, they are perfect for working with non-hardened steel, non-ferrous metals and wood, ideal for sanding welds, removing burrs, levelling surfaces or eliminating corrosion. Auction-ID: A7-50065-283

250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-50065-217

250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-50066-217

Made from high-quality HSS steel, they are perfect for working with non-hardened steel, non-ferrous metals and wood, ideal for sanding welds, removing burrs, levelling surfaces or eliminating corrosion. Auction-ID: A7-50066-83

250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-50066-17

Made from high-quality HSS steel, they are perfect for working with non-hardened steel, non-ferrous metals and wood, ideal for sanding welds, removing burrs, levelling surfaces or eliminating corrosion. Auction-ID: A7-50066-283

250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-50066-117

Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/gasoline mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-50065-399

250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-50065-17

45 cm cutters. Ideal for cutting wires, ropes, cables and bolts. Auction-ID: A7-50066-198

Made from high-quality HSS steel, they are perfect for working with non-hardened steel, non-ferrous metals and wood, ideal for sanding welds, removing burrs, levelling surfaces or eliminating corrosion. Auction-ID: A7-50066-183

Complete set of metal hole cutters hss, sizes 20- 25-30-35-40 mm Overall dimensions: 200 x 100 x 100 mm Weight: 1 kg Auction-ID: A7-50208-319

Made from high-quality HSS steel, they are perfect for working with non-hardened steel, non-ferrous metals and wood, ideal for sanding welds, removing burrs, levelling surfaces or eliminating corrosion. Auction-ID: A7-50065-83