137,345 used machines on RESALE, but how to find them? Machine Search
Polar 115 ED AT Autotrim Optionally available Jogger RA-4 Year 2007 Lift LW 1000-4 Year 1999 Transomat TR 130-EL-4 Year 2001
A total of two identical Tria S.p.A. plastic granulators are available. Rotor knives: 3, stator knives: 2, rotor diameter: 260mm, motor power: 7.5kW, throughput: 150kg-220kg/h, hopper opening: 350mm/300mm, hopper capacity: 30l, discharge hopper capacity: 15l, year of manufacture: 2015/2020. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.
: 0560 mm : 390 mm : 2000 mm : 280 mm : 80 mm : 11,25 kW spindle turning speed - stepless: 20-2000 U/min spindle taper: K 8 DIN 55027 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 9120 Type: MSF 4001.20Ltk T500 Producer: MicroStep Created: 2016 Parameters: Laser ON: 24000 h Beam ON: 22250 h Work table length: 4000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 20 mm Source: IPG YLS 4000W Cutting head: HIGHYAG BIMO FSC-MZ2.1 Machine height: 2570 mm Machine length: 10785 mm Machine width: 4508 mm Machine weight: 14689 kg
Manufacturer: Trumpf Model: Trumatic L3030 Type: TC L3030 Laser type: CO2 Laser power: 4,000 W Year of manufacture: 1999 Electrical and Utility Data - Mains supply: 400 V / 50 Hz - Connected load: 88 kVA - Control voltage: 24 V - Compressed air: 6 bar Condition and Availability The machine was in continuous production use until November 2025 and remains powered on.The resonator has been replaced once during its service life. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Cross-Cut Saw OMEC TA185 Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw pass Saw control with two buttons 7.5kw main motor Machine dimensions 492x145x120cmH Weight 600kg Net price
Cross-Cut Saw OMEC TA185 Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw pass Saw control with two buttons 7.5kw main motor Machine dimensions 492x145x120cmH Weight 600kg Net price
turning diameter over bed: mm turning diameter over slide rest: mm turning length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=1.54 m, Overall length= 0.83 m, Overall width= 1.05 m, Net weight= 293 kg,
Height=1.57 m, Overall length= 0.9 m, Overall width= 1 m, Net weight= 258 kg,
Height=0.78 m, Overall length= 0.97 m, Overall width= 1.43 m, Net weight= 223 kg,
Height=1.27 m, Overall length= 0.59 m, Overall width= 1.6 m, Net weight= 307 kg,
From a current recycling we offer you 2 used column drilling machines / thread cutting machines from maxion, type BS 36 GL. Year of Make: 2022 Condition: good Hours: Asking price: 5,000 € each Original price: 11.900 € each Equipment / accessories / other information: Tapping capacity: M5-M30 Spindle speeds: 160-260-380-580-880 rpm Spindle MK 4 Thread depth 90mm Drilling depth 160mm Radius 300m Table 550x440mm Overall height 2105mm Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 68753 Waghäusel The sale is without warranty Subject to prior sale
Inv. Num. : 9144 Type: Bylaser 4400 Producer: Bystronic Created: 2010 Parameters: Laser power: 4.4 kW Work table length: 4000 mm Work table width: 2000 mm Maximum table load (uniform): 1760 kg Maximum sheet metal cutting thickness (steel): 20 mm Number of tables: 2 Equipment: Impulse cutting Donaldson 5.5 kW Suction
ARTIGLIO log band saw line SNT 140 - Eagle 1100, Manufacture year 2004, Sawmill line suitable for cutting logs up to 18 meters, Consisting of:, - Log infeed conveyor with log loading device, - ARTIGLIO 2 module - hydraulic log carriage, type Eagle 1100, module 1 with 4 pc. hydraulic headridges, module 2 with 2 pc. hydraulic headridges, It is possible to cut with only module 1 or together module 1+2, - ARTIGLIO hydraulic driven rope feeding, Incl. rails and guiding rollers, - ARTIGLIO control unit with controller, Incl. electric cabinets, - ARTIGLIO band saw machine, type SNT 140, - Outfeed conveyor system with reload deck and cross transports
cutting width: 55 cm feeding depth: 57 cm feeding high max.: 9,5 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic veneer cutter MONGUZZI mod. 3200 used theoretical useful cut mm. 3200 nr. 2 motors installed power HP 10 Motorized rear guide with mechanical display Cutting height REER safety barrier (new) for finger detection - security level type 4 - Machine length mm. 4400 Weight kg. 3800 overhauled machine, in excellent condition CE compliant
Max. punching capacity: 400 kN Max. shear capacity: 600 kN Punches 20 mm holes in 16 mm steel Shears on the flat steel shear to 300 mm up to material thickness of 12 mm steel Further technical data on request With an assortment of stamps and dies as desired Weight: approx. 1,500 kg
1 speed on cutting drum, Product bottom exit in 200 litre tote bins, Block size: max 530 x 530 mm, Power: 3 x 380V, 50Hz, 22kW, Dimensions: 950 x 1450 x 1900 mm
Speed: 2880 RPM, Hopper: 300 litres, Power: 3 x 380V, 50Hz, 27 kW, Dimensions: 900 x 1100 x 1550 mm
There is a Baumann Perfecta 115 high-speed cutter with Baumann Perfecta BSB 3L jogger, Schneider SENATOR unloader and Schneider SENATOR pile hoist available. 1) Baumann Perfecta 115 high-speed cutter, working height: 900mm, cutting width: 1150mm, insertion depth: 1150mm, max. layer height: 165mm, residual cut: 20mm, residual cut without cover plate: 77mm, weight: 3.2t, year of manufacture: 2022, 2) Baumann Perfecta BSB 3L jogger, load capacity: 1500N, connected load: 2.5kVA, year of manufacture: 2022, 3) Schneider SENATOR unloader, load capacity: 1t, lifting height: 900mm, year of manufacture: 1990, 4) Schneider SENATOR pile hoist, year of manufacture: 2022. An on-site inspection is possible.
turning diameter over bed: 500 mm turning diameter over slide rest: 330 mm turning diameter in the gap: 600 mm turning length: 3000 mm bed width: 505 mm spindle bore: 72 mm spindle head: DIN 55022 Gr. 8 taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/min power requirement: 18,5 kW dimensions: 5,3 x 1,75 x 1,53 m weight of the machine ca.: 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix C toolholder system - some toolholders - steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 390 mm turning diameter over slide rest: 190 mm turning length: 1000 mm turning dia. in gap: 460 mm spindle head: DIN 55026 Gr. 6 spindle bore: 52 mm turning speed range: 11,2 - 2240 U/min power requirement: 7,5 kW bed width: 355 mm dimensions: 2,8 x 1,3 x 1,6 m weight of the machine ca.: 1,9 t Equipment: - Multifix B with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Horizontal Cutting Machine for baguettes, rolls, croissants, pretzels, etc. Output approx. 2,000/h with 2 knives Adjustable cutting height Channel width approx. 15cm Channel height approx. 9cm completely stainless steel
Workpiece dimensions: 4000x2000x20mm, laser power: 4kW, connected load: 88kVA, nitrogen/ oxygen connection: 30/ 20bar, control system: Siemens 840D, length: 7000mm, width: 3600mm, height: 2300mm, weight: 12.5t. An on-site inspection is possible.
Offered is a tube laser cutting machine. Processing length X: 6500mm, workpiece diameter max.: 220mm, laser power: 3500W, beam source: CO2, power-on hours: 48817h, laser beam hours: 9403h, RF tube: renewed 01/2023. Equipped with bundle loader, unloading station, extraction system, cooling unit, annual manufacturer maintenance documented. Weight: approx. 9000kg, overall dimensions X/Y/Z: approx. 10500mm/4600mm/2200mm. Inspection possible by arrangement. Expected to be available starting October/November 2026.
Johannisburg 104 automatic die-cutting machine B1 sheet fed machine in 1st class condition. Refurbished in 2020 with little use since then. Came from printer that closed down.
Cutting table Seewer Rondo SFT362. A23 Pastry Line The robust stainless steel construction of the sheeters and cutting tables guarantees a long service life. Condition: cleaned & tested Total length approx. 360 cm Belt speed adjustable Incl. various cutting rollers Year of Make: 1998 Four time-saving steps1. The dough is gently rolled out and reeled on the sheeter.2. Place the dough belt on the cutting table, where it is uncoiled again.3. The dough sheet is cut into the desired shape.4. They fill and fold the pastries on the cutting table.
Block size: max 1200 x 640 x 380 mm, Cutting width: 680 mm, Thickness: 10 - 60 mm, Compressed air: 6 Bar, 500 L/min., Power: 3 x 400V, 50Hz, 15kW, Dimensions: 3400 x 1300 x 2650 mm, Weight: 2500 kg
Key data: 2
Wigo Copy Milling Machine Type: 1075 1 milling motor each on the right and left 5.5 kW each Spindle diameter 30 mm Milling spindles run in the same and counter-rotation Running direction can be switched Milling process via scanning with thrust ring Working length max. 1400 mm Working width max. 210 mm Working height max. 90 mm 2 pneumatic clamping cylinders from above 2 x pneumatic side pressure with 2 straight milling heads milling height 50 mm Dimensions Length 3200 mm x W 1200 mm x H 1600 mm Weight approx: 1000 kg
Key data: 420 mm, 170 mm, 115 mm
400 Volt three-phase brake motor Saw blade diameter 420 mm, Saw blade holder 40 mm, Cutting height 170 mm, Saw blade inclined to 45°: cutting height 115 mm , Cutting length 410 mm INCLUDED: Machine can be tilted from the front on both sides via hand crank Additional price for 3 kW 400 volt motor Hydraulic feed brake Laser setup Pneum. Material tension on both sides, from above Carbide circular saw blade 420x3.4/2.4 x40 mm 48 WZ neg Machine stand
turning diameter over bed: 480 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: - mm turning speeds: 90 - 1120 U/min centre height: 240 mm spindle bore: 52 mm total power requirement: 7,5 KW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 3,0 x 1,3 x 1,5 m Engine Lathe - 3-jaw chuck (200 mm) - Quick-change tool post - Steady rest - Machine lamp - Chip tray - Center point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grecon Dimter Opticut S50 Optimizer Material input length max: 5000mm Wood width min/max 20-300mm Wood thickness min/max 10-100mm Packet cutting capability Cutting out material defects CE Certificate
AGIE AGIECUT PROGRESS 2 Wire EDM machine Workpiece height: approx. 250 mm Workpiece weight: approx. 400–500 kg Table size: approx. 600 x 400 mm Supply voltage 3 × 400 V, frequency 50 Hz, power 12.1 kVA, rated current 17.5 A, short-circuit current 10 kA. Wire EDM technology, automatic wire feed, hydraulic systems, robust construction. Control panel, emergency stop, sensor monitoring.
Manufacturer: Perndorfer Model: WSS5020/1HD18 5/1ASK Year of Manufacture: 2011 Operating Voltage: 400 VAC Frequency: 50 Hz Back-up Fuse: max. 40 A Control Voltage: 24 VDC BHDT High-Pressure Intensifier - Manufacturer: BHDT - Type: Intensifier - Max. Working Pressure: 400 MPa (4,000 bar) - Max. Flow Rate: 3.8 l/min - Manufacturing Week/Year: 47 / 2011 NOT IN WORKING CONDITION / 100 HOURS ON METER Find more here - .ucymachines/ Contact us at - sales@ucymachines
Hydraulic Press for Diamond Cutting Disc 60phi500phi Plate Furnace Medium Pressure Forming Machine Instruction Manual 1988.6.25 Kyodo Seiki Co., Ltd. Postal:211 518-4 Ogura, Saiwai-ku, Kawasaki-shi, Kanagawa, Japan TEL: 044(544)6925 FAX: 044-541-3546 1. Machine Specifications 1) Maximum Output: 60,000 kg 2) Max Output Pressure: 150 kg/cm² 3) Effective Stroke: 250 mm 4) Furnace Dimensions: - Horizontal Side: 8kw × 2 - Rear Side (With Door): 8kw 24kw 5) Heating Temperature: 860°C 6) Internal Dimensions: W650 mm × N 450 mm ×D 750 mm 7) Power Input: - Main Pump: 2.2 kW × 4 pole - Auxiliary Pump: 0.4 kW × 4 pole 8) Oil Tank Capacity: 120 L (ISO.VG32-56 equivalent hydraulic oil) 9) Temperature Control: Silister P.I.D Control 10) Vacuum: 4-stage 415V - 50Hz 2. Machine Installation 1) Install the press body on a flat surface. Secure it with anchor bolts if possi ...
Horizontal panel saw with pressure beam Type: HPP 200/32/32 Manufacturer: Holzma Year: 2015 Avaílable: 10/2026 Cross section: 3200x3200 mm Optimization directly on the CADPLAN 4 saw - JUST IN TIME Large PICA II printer Two engines, main unit 13kw, pre-cut 1.1kw Package for cut-outs Grooving package Additional two-finger collet for the 175mm position 3x set of disc and pre-cut Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -Manufacturer: Edalco, Thread cutting attachment with slip clutch -Type: Edalmatic EDM-R 1030 -Thread cutting sizes: M10 - M30 -Integrated reversing gearbox: with rapid return -Recording: MK5 -Tap chuck: Ø 22 mm -Dimensions: Ø 123 x 475 mm -Weight: 9 kg
This 3-axis TRUMPF TruLaser 3030 L20 was manufactured in 2015. It features a powerful TruFlow 3200 CO2 laser with a laser power of 3200 W, making it suitable for various cutting applications. The machine has been utilized for 82,247 working hours, ensuring reliability and performance. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 L20 machine we have for sale. Contact us for further details.
This 5-axis MAVIJET MJT-W53D-4020 was manufactured in 2020, featuring a CNC 5-axis, bridge type design for precision waterjet cutting. It includes a high-pressure pump operating at 4000 bar and a rapid traverse speed of 30000 mm/min. The machine supports a cutting size of 4000 × 2000 × 250 mm and is equipped with a smart abrasive reserve tank. If you are looking to get high-quality cutting capabilities, consider the MAVIJET MJT-W53D-4020 machine we have for sale. Contact us for more information.
Manufacturer: Adige Model: Lasertube LT722D Technical Details: - Laser Source: Rofin Sinar DC25 - Laser Power: 40 kVA apparent power - Minimum Bar Length: 3200 mm - Maximum Bar Length: 6500 mm - Max Bar Weight (L=6500): 100 kg - Max Bar Weight (L=8500): 130 kg - Round Section Diameter: 12 to 140 mm - Round Section Optional: 12 to 152.5 mm - Square Section Side: 12 to 120 mm - Max Circumscribed Circle: 170 mm - Minimum Side Dimension: 10 mm - Maximum Side Dimension: 140 mm - Max Side Dimension Optional: 150 mm - Max Load Saddle Capacity: 4000 kg - Power Voltage: 400 V +/- 10% - Frequency: 50 Hz - Type of Power: Three phase without neutral - Total Machine Power: 26 kVA - Enclosure Protection: IP54 - Hydraulic Reservoir Capacity: 25 l - Hydraulic Pressure: 70 bar - Pneumatic Pressure: 6 bar - Pneumatic Capacity: > 500 Nl/min - Weight L=6500 version: 9000 daN - Weight L=8500 version: 1000 ...
EDM machine Sodick AQ 327L BJ 2006 EDM machine Sodick AG 60L BJ 2020
Flaker Laska -Type: GFS 510 -Power: 18.5 kW -Capacity: up to 4000 kg/h -Operating temperature: up to -15°C -Block size: 500 x 300 mm -External dimensions: 1830 x 1900 x 2050 mm -Power supply: 380V 50Hz 3Ph -Weight: approx. 1400 kg -Made of stainless steel -Condition: Used in very good condition, ready to work
Polar 115 EMC monitor in production ready condition, with extra reserve blades. Available immediately. Can ship worldwide.
- Program - Air table - Standard side table, right - Resopal side table with air , left - R2 Jogger - Spare kife
SOITAAB DUALINE 1530 waterjet cutting machine was built in 2011 in Italy by SOITAAB Impianti srl. It is an extremely versatile machine that combines the advantages of waterjet and plasma cutting, providing great production flexibility. It is capable of machining a wide range of materials, such as metal, plastic, stone and glass, which makes it suitable for use in a number of industries. Cutting is performed by means of a state-of-the-art AccuValve head, designed for maximum efficiency and reliable operation in demanding production conditions. The head moves in the X,Y,Z axes with feeds of 3000 mm, 1500 mm and 200 mm respectively. Depending on the type of task, either water jet with an abrasive addition or plasma generated by a reliable HYPERTHERM plasma source of the highest energy efficiency is used. The SOITAAB DUALINE WaterJet ensures high work stability during even the most int ...
This TRUMPF Trumatic L6050 was manufactured in 2006. A robust laser cutting machine featuring a SIEMENS SINUMERIK 840D controller, it handles a maximum workpiece weight of 1.900 kg. It efficiently cuts through mild steel up to 20 mm, stainless steel up to 15 mm, and aluminium up to 10 mm. Ideal for large-scale operations with a working area of 6.000 x 2.000 mm. For more information about this laser cutting machine, please reach out to us.
This 3s LVD Orion 3015 Plus was manufactured in 2013. It features a powerful 2500 W Fanuc HF-excited CO₂ laser, capable of cutting various materials with a maximum sheet size of 3000 × 1500 mm and a weight of 570 kg. The machine offers impressive positioning speeds of 100 m/min on the X/Y axes. Consider the opportunity to buy this LVD Orion 3015 Plus fiber laser cutting machine. Contact us for further details.
maximum number of results exceeded
please refine your search
