plasma cut cnc used for sale

STM 1530 PremiumCut 3D 12° Hours: 3200 Year of manufacture: 2018 Working area: 3002 x 1502 x 300 mm Pump: BFT ECOTRON® 40.37 (37 kW, 4000 bar) Including professional dismantling, transport and commissioning within Germany

used Spewe mineral wool cutter, universal guide unit for many Possible applications, including the following equipment: - Short-stroke parallelogram - Telescopic cut-out post - Insulation thickness preset - Rear saw blade forced guide - Cutting guide swivels from -5 to +45 degrees - Without guide slide - Without insulation saw Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Cutting length: 1270/1100 mm Cutting depth at 90 degrees: 80 - 305 mm Cutting depth at 45 degrees: 180 mm Machine weight: 24 kg

Format (cm): 72 Equipment / Additional information: 1x reserve knife

Laser Cutting Machine Manufacturer: Eurolaser Type: LCS XL-1600 Year of Make: 2010 Power: 200 W Working area: 2,270 mm x 1,600 mm Electrical data: max. 6 kW / max. 32 A Previous area of application: Cutting acrylic glass Laser source was renewed 5 years ago

A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible.

Wanner Mühlen E45.80 Series No. 140431, 140432 and 140265 Sale due to closure Location

CONTROLS   CNC controls SIEMENS SINUMERIK 840 D FEEDSTOCK TUBE   external diameter min.: 10 mm   external diameter max.: 90 mm   wall thickness min.: 0.8 mm   length min.: 100 mm   lenght max.: 2000 mm

Used parts: Milling shaft / 2-speed gearbox SelectaTilth / Final drive: gears, chain, side cover, cork seal etc.

Dumpling cutting machine Sama Tabletop model with collection container Connection 400V, 16A-CEE plug Used machine

MHS Ideal SB Year of manufacture 2019, from dissolved Real Markt Machine is in good condition, but should be thoroughly cleaned before use. Three different cutting thicknesses can be set. Ideal for the self-service area in the store. Voltage: 230V Dimensions: 95x72x128H Weight: 190kg Power: 1000W Video about test run available

Key data: 1550 mm, 3 mm, 120 1/min

Qty. 1 Second-hand rotary shear cut-to-length line – still in operation Mfc.: PACO E.N.G Built: 2010 Still in operation! Raw Material: CR, EGI, GI, STS, AL, COLOR COATING COILS Tensile Strength Max.: 60 kg/mm2 Strip Width: 300 ~ 1,550 mm Thickness: 0.2 ~ 3.0 mm Coil Weight: 20,000 kg Sheet Length No. 1 Piler: 300 - 2,500 mm No. 2 Piler: 300 ~ 2,500 mm Piling Weight No. 1 Piler: 5,000 kg No. 2 Piler: 5,000 kg Coil ID: ∅508 mm, ∅610 mm = RUBBER SLEEVE Coil OD: ∅800 mm ~ Max. ∅2,000 mm

Dough and cake cutter 5-piece corrugated NEW! Dough and cake cutter in no timeSingle-sided, corrugated5-pieceVersatileDetails see picture

TECHNICAL DATA: Machine for making pallets Usable work surface: 1200 x 1200 mm Motorized loading roller conveyor: 4500 mm Motorized unloading conveyor: 2500 mm + 3000 mm (free-running) Installed power (cutting unit): 9 kW EQUIPPED WITH: Package Holder 01 Lower conveyor belt for wood waste: 8000 x 800 mm + Tiltable end ramp: 2500 mm

Ruck Zuck Dough Cutter Cake Cutter/14 Wheels/Smooth/CorrugatedMaterial: Stainless SteelDesign: 14 Wheels: 7 Wheels Smooth and 7 Wheels Serrated The cutting width is flexibly adjustable and can be made fixed so that you always achieve the same cutting width. Wheel diameter: 5.5 cmCutting width: 1 - 12.5 cm See pictures for details

Dough and cake cutter 7-piece corrugated NEW! Dough and cake cutter in no timeSingle-sided, corrugated7-pieceVersatileSee picture for details

Ruck Zuck Dough Cutter Cake Cutter/10 Wheels/Smooth/CorrugatedProduct descriptionMaterial: Stainless SteelDesign: 10 Wheels: 5 Wheels Smooth and 5 Wheels Serrated The cutting width is flexibly adjustable and can be made fixed so that you always achieve the same cutting width. Wheel diameter: 5.5 cmCutting width: 1 - 12.5 cm See pictures for details

Dough and cake cutter 5-piece smooth NEW! Dough and cake cutter in no timeSingle-sided, smooth5-pieceVersatileDetails see picture

Dough and cake cutter 7-piece smooth NEW! Dough and cake cutter in no time at allSingle-sided, with smooth wheelsVersatile7-pieceDetails see picture

Kullen Cutting Knife No. 1817-12 3 pieces NEW!  Kullen cutting knife, double-sharp1 side sharp cutting edge and 1 side wavy cutting edgeEnglish style3 piecesNo. 1817-12Stainless steel, total length 44 cm see picture for details

Kullenschneidemesser 3 pcs NEW!  Kullen cutting knife, double-sharpMade of stainless steel1 side sharp cutting edge and 1 side serrated cutting edgeEnglish style3 piecesNo. 1817/DW/12Total length 44 cm See picture for details

Kullenschneidemesser 3 pcs NEW! Â Kullen cutting knife, double sharpMade of stainless steelTotal length about 44 cm1 side sharp cutting edgeAnd 1 side wave bladeEnglish style3 piecesNo. 1817/12Â See picture for details

Shaft Cutting Knife No. 1815-12 3 pieces NEW!  Shaft cutting knife 3 piecesNo. 1815-12Stainless steel, full length 44 cm,  Only with hollows, other side blunt Details see picture

Baker's Knife/Cutting Knife No. 1873-12-H 3 pieces NEW!  Baker's knife/cutting knife, wide blade, extra strong3 piecesNo. 1873-12-HRostfrei, total length 45 cm  Details see picture

Dough / Pizza Cutter / Pizza Roller ( 2 pieces )made of stainless steel with plastic handle  ̧55mm total length 180mmeasy, smooth0.090grDetails see picture

A CNC dual-head waterjet cutting system Bystronic is available. Working dimensions X/Y/Z: 4000mm/2250mm/230mm, cutting heads: 2, max. cutting carriage distance: 1150mm, simultaneous movement: 84m/min, machine tolerance: +/-0.1mm, repeatability: +/-0.05mm, max. frame load capacity: 7000kg, max. workpiece weight: 6300kg, max. round part diameter and length: 440mm/3700mm, max. operating pressure: 3800bar. Machine dimensions X/Y/Z: approx. 9000mm/7550mm/2050mm, weight: approx. 10000kg, operating hours: approx. 41130h, cutting hours head 1/head 2: 13720h/956h. The second head was removed and the cutting unit was mounted on head 1 as a spare part. However, after procurement of a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. Including a desalination system and all spare parts. Documentation available. An on-site inspection is possible.

Year of manufacturing: 2009 19? Monitor and Programm Side-table left with Air Side-table right with Air Air Table Photocells

Air table Side Table Programm Spare knife

Air table Side Table TFT Monitor Programm Spare knife

Machine – Trumpf TC6000L - Manufacturer: Trumpf - Type: TC - Model: TC6000L 1300-3200W - Year of manufacture: 06/2002 - Operating hours: 109,870 h total / 76,477 h laser on - Laser power: 3,200 W - Punching force: 22 tons - Sheet thickness: Max. 8 mm - Workpiece weight: 200 kg - Control unit: Siemens Sinumerik 840D SheetMaster - Model: SM1606 V110 09 - Year of manufacture: 2003 Trumagrip - Year of manufacture: 2003 Find more here - / Contact us at -

Manufacturer:Lisec Model: VB-33 Year of Manufacture: 2011 Type of Machine : Cutting Machine for Laminated Glass Weight: 2,200 kg Connected load: 17.00 kVA Power supply: 3/N/PE – 50 Hz – 400 V AC/DC supply: 400 V / 24 V Max. pressure: 6.00 bar Max. load: 43 kg/m² Certification: CE Find more here - / Contact us at -

- Touch Screen Monitor - air table - side air table, left/right - air corners - Autotrim - Baumann Multistapler BA N - Spare knife

Inv. Num. : 9032 Type: Mec3000 Producer: Simec Created: 2019 Parameters: Switch-on hours: 9365 h Input length of the material: 6000–7000 mm. Parting diameter: 12–100 mm. Output length: 50–2000 mm.

Comec FXT double-sided milling machine Number of milling units 4 Generator system: Right/Left/Up/Top Power of milling units 4×0.85kw Rotational speed 12000rpm Feed speed adjustable by variator

A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible.

Horizon T61 year: 1999 cutting width: 61 cm light curtain digital display with programs and numeric keypad

Ideal 3915-95 Year: 1996 cutting width: 390 mm pile heifht: 40 mm Electric cutting manual size change manual clamping

This machine is designed for cutting stacks of paper to a specific size. Cutting length: 475 mm Insertion depth: 458 mm Width x Depth x Height: 762 x 1053x1296 mm Good condition

A complete cheese cutting and portioning line with one slicer, one scale and conveyor units is available. Products: meat/cheese/sausage/vegan products, slice thickness range: 0.1mm-5mm, max. product length: 1200mm, max. cutting width: 360mm, blade type: circular blade, blade diameter: 460mm, cutting angle: 22°, max. weighing capacity: 100weighings/min, machine dimensions X/Y/Z: approx. 2500mm/1600mm/2300mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible.

double wire processing diameter range 0,8-2 mm cutting length 1000 mm speed - meters/min 80

diameter range 4-10 mm cutting length 3000 mm speed - meters/min 130

diameter range 7-14 mm cutting length 3000 mm speed - meters/min 90

diameter range 5-13 mm cutting length 2000 mm speed - meters/min 21 - 90

diameter range 3-10 mm cutting length 2000 mm speed - meters/min 22-71

diameter range 1-8 mm cutting length 3000 mm speed - meters/min 13-56

flying shears diameter range 8-16 mm cutting length 520-6000 mm speed - meters/min 25-75 diameter range 8-14 mm

diameter range 1,5-7 mm cutting length 2000 mm speed - meters/min 90

wire diameter range 1,5-7,0mm cutting length 3000 mm speed - meters/min 5-120

diameter range 3-10 mm cutting length 2000 mm speed - meters/min 120

Guiding and pulling spindle lathe OPTIMUM "Optiturn 4210 V" With 3 axis digital display Year of Make: 2015 Spindle bore: 54 mm Center width: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm Stepless speed with display With the following accessories: Multifix Tool Holder Coolant Setup Three-jaw chuck 0 200 mm Four-jaw chuck 0 250 mm Collet chuck complete with collets up to 0 32 mm Feed protection Chip protection with lighting Fixed Lynette 0 approx. 150 mm Moving Lynette 0 approx. 100 mm 4 Height Adjustable Machine Shoes 1 pc. Rotating centering tip Operating instructions

ALFAMACCHINE T350 miter sawmill Two-Saw for 45 Degree Cutting Blade diameter 350 mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air Requirement 5-7 bar Cutting Width: 15-80mm Cutting height: 10-80mm