129,479 used machines on RESALE, but how to find them? Machine Search
Height=1.5 m, Overall length= 1.1 m, Overall width= 1.75 m, Net weight= 360 kg,
Height=1.99 m, Overall length= 0.81 m, Overall width= 1.52 m, Net weight= 310 kg,
Height=1.36 m, Overall length= 0.64 m, Overall width= 1.5 m, Net weight= 250 kg,
Height=1.95 m, Overall length= 1.25 m, Overall width= 1.16 m, Net weight= 350 kg,
Height=1.36 m, Overall length= 0.64 m, Overall width= 1.5 m, Net weight= 250 kg,
Height=1.01 m, Overall length= 0.65 m, Overall width= 0.9 m, Net weight= 140 kg,
Height=1.8 m, Overall length= 1 m, Overall width= 1.4 m, Net weight= 510 kg,
Height=1.5 m, Overall length= 1 m, Overall width= 1.1 m,
Height=1.02 m, Overall length= 0.9 m, Overall width= 1.1 m, Net weight= 590 kg,
Height=1.22 m, Overall length= 1.1 m, Overall width= 2.16 m, Net weight= 865 kg,
Height=1.75 m, Overall length= 3 m, Overall width= 1.7 m, Net weight= 1050 kg,
Height=1.22 m, Overall length= 0.56 m, Overall width= 0.57 m, Net weight= 330 kg,
Frozen meat slicer Magurit 152, Electrics and hydraulics completely overhauled, Connection 400V, 4kW, year of construction 1991, Dimensions LxWxH approx. 185x75x138cm, weight approx. 390kg, very good condition, fully functional
A dividing system consisting of longitudinal and cross-cut saw Anthon is available. Production capacity at 800mm/500mm: approx. 20m³/h, max. panel dimensions X/Y: 6300mm/2500mm, total system dimensions X/Y/Z: approx. 48m/16m/3m, weight: approx. 60t. 1) Saw Anthon LNB-LNB, year of manufacture: 1994, max. package height: 150mm, control: Siemens S5. 2) In-house paternoster, decks: 3, levels: 2. 3) 4x liftomat Holzma Hau series, years of manufacture: 2004, stacking positions: 4. 4) Feeding system Systraplan, year of manufacture: 1989, stacking positions: 3. 5) Cut-off saw Holzma, year of manufacture: 1996. 6) Chipper Masur LZ 800, year of manufacture: 2003. Includes critical spare parts, such as a replacement control unit. This is a system for mass production. Documentation available. An on-site inspection is possible. Expected to be available from October 2026.
table length: 4000 mm table width: 2000 mm burner heads: Precitec Procutter x-axis: 4050 mm z-axis: 150 mm y-axis: 2050 mm total power requirement: 18,0 kW weight of the machine ca.: 18.150 kg dimensions of the machine ca.: 12430 X 5664 X 2310 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dewalt Radial arm saw Cutting width 350mm Cutting height 65mm 1.5KW 400V 50HZ Table 800 x 600mm Solid, cast-iron radial arm boom for maximum accuracy and durability with base frame Pull saw double bevel adjustable Hemming cuts also possible G&-5195-M3180
Inv. Num. : 8644 Type: BSL 204 Producer: Bäumer Created: 1983 Parameters: Max. workpiece dimensions: 2200 x 2200 x 1300 mm Equipment: Vacuum table New motor for the table drive New sensors New control panel GO spirals and nuts for vertical machine movement
A cutting and winding machine Olbricht is available. Documentation available. An on-site inspection is possible.
Polar 137 N+, Year 2025 TFT Touchscreen Program Airtable Airtable left Airtable right Etc. Available: at short term
Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife
(engraving, cutting) S. No.: S36-0685 Equipment / Additional information: With Rip and extraction system (S. No.: 01422-11122) Laser type: CO2 CO2 laser power: 80W Working area: 813 x 508 mm Loading area: 890 x 600 mm Max. workpiece height: 210 mm with 1.5-inch, 2.0-inch lens 197.5 mm with 2.0-inch spacer lens, 2.5-inch lens 159 mm with 4.0-inch lens Working table: Multifunctional table concept Rulers in mm or inches Electronic, programmable Z-axis with servo motor Max. process speed: 355 cm/s Max. acceleration: 50 m/s² Motor: Brushless DC servo motor Encoder: Incremental Optical elements: Telescope, lens, and mirror Lenses: 1.5-inch, 2.0-inch, 2.0-inch spacer lens, 2.5-inch, 4.0-inch Repeatability: +/- 0.015 mm (0.0006 inches), across the entire work area Addressable accuracy: 5 µm (0.0002 inches) Accuracy of Part size: Dependent on material and process Max. l ...
CURSAL TRV500 mobile stop cross-cut saw in accordance with CE standards, working direction from right to left, consisting of: – RALM 4000 x 450 roller conveyor – TRV500 rapid cut-off machine with: Double button cutting control PV500 pressure 150mm stroke blade D=500mm PLC for cutting programming and ejector management – TSLR 5000 x 400 discharge mat – electronic retainer FCN/80 L=5000 – 1 EP1500 pneumatic ejector – roller rail unit VRF1500x2000x5
Waterjet machine Flow Incl. new maintenance kit pump incl. documentation Year of Make: 2006 Manufacturer: FLOW Europe GmbH Manufactured Date: 11/05 Working area: (L x W x H): 3600 x 2000 mm Continuous working pressure: 3,800 bar High Pressure Pump: FLOW – Hyplex Pump Model HyPlex 50 Hours: 4342 hours Maintenance intervals: Regular according to maintenance schedule Last service at: 4102 hours (major pump maintenance) Software: Flow-Master PC Software Flow PATH Module, Version 6.0 Flow CUT Module, Version 6.0 Flow Master 6.0 Professional (FlowNest) Hardware clamping and clamping device, Flow, set-up and positioning aids with laser pointer, Devices 1x Sand Silo 1x Sand mixer unit Flow 1x Water Softening (WTS) 1x collision sensor defective Documentation package, Various spare parts, all pre-pipes and cables
Manufacturer: TRUMPF Model: TruLaser 5030 Classic Year of Manufacture: 2007 Laser Power: 5000 W Operating hours: 55,874 h (of which only 23,565 h were used for cutting) Operation mode: exclusively single-shift operation Maintenance: carried out regularly and exclusively by Trumpf Equipment: includes 2 interchangeable pallets Electrical Specs: - Supply: 400 V / 50 Hz - Connection Load: 105 kVA - Control Voltage: 24 V - Required Fuse Protection: 3 × 160 A Gas Supply Requirements: - Compressed Air: 7–10 bar - Nitrogen (N₂): 30 bar - Oxygen (O₂): 20 bar Find more here - / Contact us at -
Paper cutting machine Polar 58 EM, machine number 6151039, year of construction 1991, program control, 58 cm working width, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
For sale is a good used CNC wire EDM machine of the brand Fanuc Robocut Alpha C600iB from November 2016. The EDM machine is immediately available. Prior sale and errors excepted.
Height=0.81 m, Overall length= 1.75 m, Overall width= 1.03 m, Net weight= 510 kg,
Machine with water tank and automatic wire threading, cooling unit and software. XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Accessories: Dongel & laptop, various spare parts (nozzles, filters, etc.)
Type : Peddy Year of manufacture : 1974 Specifications: Cutting capacity 100 x 10 mm Round steel 25 mm Square steel 22 mm Weight 400 kg
Make: Colchester Type / Model: Student Center width: 500 mm Passage: 42 mm Tip height: 175 mm Turning diameter over bed: 350 mm over slides: 200 mm Speed range: 34 to 1,500 mm Feed lengthwise: flat: 0.04 to 0.25 mm/rev Connection: 1.1 / 2.2 kW Accessories: Steel holder, 3-jaw chuck, 4 jaw chucks, steel bracket Weight: approx. 800 kg Dimensions: 1,550 x 900 x 1,200 mm
Tip height: 175 mm Center width: 800 mm Circumferential diameter over bed: 350 mm Circumferential diameter over support: 310 mm Spindle bore: 46 mm Speed range: 25 - 2000 rpm With digital display
Cutting width: 1150mm, max. format: 1150mm/1150mm, max. stack height: 120mm, min. cutting format: 20mm, pressing force: 40kN, cutting speed: 42 cuts/min, machine dimensions X/Y/Z: approx. 2650mm/2650mm/1700mm, weight: approx. 3000kg, control: MCS-2 TV. Documentation available. On-site inspection is possible.
Height=1.36 m, Overall length= 3.38 m, Overall width= 1.84 m, Net weight= 345 kg,
Height=1.22 m, Overall length= 0.95 m, Overall width= 0.82 m, Net weight= 165 kg,
Height=1.22 m, Overall length= 0.95 m, Overall width= 0.82 m, Net weight= 521 kg,
Height=1.22 m, Overall length= 0.95 m, Overall width= 0.82 m, Net weight= 302 kg,
Height=1.569 m, Overall length= 2.56 m, Overall width= 0.897 m, Net weight= 584 kg,
Height=1.4 m, Overall length= 1.88 m, Overall width= 0.81 m, Net weight= 221 kg,
Height=1.64 m, Overall length= 0.99 m, Overall width= 0.87 m, Net weight= 303 kg,
Height=1.275 m, Overall length= 0.99 m, Overall width= 0.75 m, Net weight= 90 kg,
Voor een Afrikaanse klant hebben we een afrol- en op maat snijlijn opgeknapt en uitgerust met een eenvoudige, gebruiksvriendelijke Elgo-bediening.
#6539 Polar 78 ED Age: 2002 Available: Immediately - Air table - Steal side table left side / Reposal table right side
Height=1.6 m, Overall length= 0.7 m, Overall width= 0.9 m, Net weight= 217 kg,
Height=1.23 m, Overall length= 0.35 m, Overall width= 0.55 m, Net weight= 60 kg,
Height=1.53 m, Overall length= 1.17 m, Overall width= 1.37 m, Net weight= 470 kg,
Height=2.09 m, Overall length= 1.08 m, Overall width= 2.25 m, Net weight= 1610 kg,
Height=1.82 m, Overall length= 0.91 m, Overall width= 1.48 m, Net weight= 365 kg,
Bread slicer MHS creel BM 45 N Creel cutting machine floor model Model: MHS BM 45 N with crumb drawer at the bottom Machine mobile Connection 220V Used machine cleaned Option: Leasing & Rental Service Maintenance contract Delivery Instruction & Commissioning
maximum number of results exceeded
please refine your search
