135,911 used machines on RESALE, but how to find them? Machine Search
used
1 Qty.1 Second-hand brush grinding machine Mfc.: Gurutzpe Type: Brushes cutting machine Built: 1975 Model: Max. Q800x2500 2 Qty. 1 Second-hand Rubber Grinding Machine Mfc.: Churchill Type: PCH 24" X 96" Built: 1957 Model: Max. Q600x2400
STYRO-CUT 350 Shredder for Polystyrene specifications Motor power: 5.5 kW / 380 V Throughput: approx. 4 m³ / hour (depending on material and sieve) Speed: 2,900/min. Dimensions: W x D x H: 640 mm x 1,500 mm x 2,400 mm Volume reduction: 70 – 80 % Weight: approx. 170 kg Insertion opening: Ø 280 mm Height insertion: 1,600 mm Granulate size: up to 6 mm STYRO-CUT 350 is a device for shredding (granulating) the polystyrene (EPS). The packaging residues, sections are entered into the insertion funnel and the material is automatically sucked in by the device. The material is shredded by the device in a single step, granulated and filled into bags or transported to the silo. The device reduces the volume by 70-80% and thus also reduces the cost of storage and transport. Un contaminated ESP granules can be reused in the production of new products from EPS. The produced granu ...
Fit the PVS 125 or 150 mm Reework construction group or simply to fit in the Exchange or replacement for food TEC / Busser / Stephan / Dacia / or similar Reeworkanlagen for the bread / baking / food industry for the production of bread mash or similar products
CHEESE PORTION CUTTING MACHINE SLICING MACHINE AGED CHEESES GOUDA, EDAM, MIMOLETTE, CHEDDAR AND MANY KINDS WITH PLC CONTROL AND HMI OPERATOR PANEL COMPLETE STAINLESS STEEL THICKNESS IS ADJUSTABLE
Sheet thickness aluminium: 1.00 mm Due to the bevel cut, the X-Cut machine can not only cut straight strips in the longitudinal and transverse directions, the automated bevel cut opens up many new possibilities for cutting the different surfaces quickly and accurately. Saves up to 90% of the time Up to 60 degrees angle adjustment in both directions Intuitive operation thanks to touchscreen and calculation aids Thanks to optimized software, cutting trapezoidal surfaces, triangular surfaces and other surfaces for standing seam roofs and wall cladding is no problem Due to the fully automated bevel cutting and the versatility and accuracy of the software, a high level of time savings can be achieved during production in the company and also during installation on the construction site Automatic operation: Enter the desired length and the number of pieces to be cut automatically. Tota ...
PVS 150 V Multicut with 15 to 22 KW with combinable cutting systems Rotor/ stator non-contact Hole disc with knife head or rotor/stator with perforated disc system 2 cutting stages
AFT Sandwich cutter Serial: 135012 Stainless frame, automatically cuts sandwiches into halfs, ensures clean and centered cut on all types of sandwiches, belt width 150mm, overall length 2200, mobile, 3Ph
Complete coil-fed cutting and feeding line for disc production Composed of: • Feeder/Decoiler: LARA DEMAE-10000/100/1400-D • Cutter: TIMAC TZZ-1604 with double-station stacker • Shear and feed table up to 1400 mm by LARA Condition: In operation, ready for production. Designed mainly for working with carbon steel, stainless steel, and aluminum. The installation combines a servo-driven straightener-feeder from LARA with a TIMAC circular shear, scrap-cutting shear, and automatic double-station stacker, allowing for continuous, precise, and safe operation. Main components: Hydraulic motorized decoiler with loading cart and loop control via laser sensor. Equipped with safety barriers in the coil loading area for optimal visibility during the decoiling and cutting process. Combined straightener-feeder with 11 rollers and AC servomotor controlled by PLC + touchscreen HMI. TIMAC ...
Type: Bizerba A404 Blade diameter: 330 mm Max. product length: 540 mm Max. product size round shape: - min. diameter: 50 mm - max. diameter: 180 mm Max. product size rectangular shape: - min size: 50 х 50 mm - max. size: 175 х 240 mm Slice thickness: 0,5 - 12 мм infinitely adjustable Voltage: 400 V, 50Hz Delivery time: 1 working day after payment
Mini roller cutter Our range now also includes machines for processing residual rolls, for example from paper production, the packaging industry, printing houses, textiles, aluminium rolls, film rolls, etc. These heavy rollers cannot be processed efficiently and safely with the normal cutting systems, but with these special "guillotine" roller cutters this is no longer a problem. The mini roller cutter can be seen here as a standard version. We offer the Mini roller cutter in version G20 / 25 and G30. All data can be customized according to the customer's wishes. (Sensors | Protective grille | Light barriers | colour, etc.) Roll width: max. 700 mm Roller height: max. 800 mm Drive: 5.5 Kw Cutting force: 25 T cylinders Weight: 1200 kg Working cycle: 65 seconds Including automatic return: Important roll cutting width and roll cutting height can be adjusted as desired. Dep ...
suitable for XL 105, SM / CD 102, can be converted to standard feeder, Preset or Preset Plus feeder
Shaper cutters from Module 1 to Module 14 available: - different no. of teeth, different pressure anles, different profiles, bores and sizes! shaft cutters Module 1-3 = 150 Euro, 4-5 = 250 Euro, >5 = 300 Euro disc cutters Module 1-3 = 150 Euro, 4-6 = 200 Euro, 7-10 = 250 Euro, 10-14 = 300 Euro. complete list on request! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
NNP Pneumatic grid cutter Stainless pneumatic cutter, ideal for fruit and veg, mobile frame
Min-max cutting width: 250-1150 mm Max reel width: 1200 mm Reel weight: 1100 kg Internal core: 70/76 Max reel diameter: 1050 mm Max speed: 195 m/min Power 400 V, 50 Hz Air 6 bars Double reel unwinder Double photocell/register control Touch screen control panel for cutting on size starting from reel to sheet Materials: ALU, plastic film, paper from 10 to 250 grs, laminates and tissue paper, paper + cardboard, adhesives, shoppers paper, gift paper, offset paper, wrapping paper for pastry, washing etc.. plastic film from 30 to 200 my like PE, pvc, PP, polyester, celluloid, others Electronic counter of pieces
Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Length: 300/230 mm -Height: 35 mm -Weight: 4 kg
MELOMAT Fresh-Cut Station DOMA For professional use at weekly markets, in the supermarket, delicatessen & convenience production or the fresh food counter. Reduced personnel costs. Fast processing of melons, clean cuts in seconds. Ideal for presentation & sales. Equipment: DOMA MELOma-T Cutting Machine 3 knife inserts Integrated, mobile sales station / work table with lighting and shelves Mettler Toledo Scales & Labelers DOMA MELOpack Packaging Unit / Tabletop Film Device Trash Can / Waste Solution Fresh Cut System is fully functional and ready to use! Condition & accessories see original pictures! Purchase price incl. current VAT A proper invoice will be issued! If you have any questions, email or call.
AGIE CHARMILLES CUT 30 P wire EDM was built in 2012 (launched in 2013) in China by Beijing Agie Charmilles Co., Ltd. The machine is designed for the production of precision dies, cutting dies, punches and other parts with complex geometry. Workpieces with a maximum weight of 1000 kg are machined by means of electrical discharge machining, which enables the creation of complex shapes even in the hardest materials. The process involves the removal of material by means of controlled electrical discharges between the wire and the workpiece submerged in a dielectric. This results in a high-quality surface finish without the need for additional finishing operations, such as polishing. The AGIE CHARMILLES CUT 30 P performs machining with a cutting head that moves in the X, Y and Z axes with feeds of 600 mm, 400 mm and 350 mm respectively. Maximum cutting accuracy is ensured by a HANS SCHMIDT ...
Conveyor width: 600 mm Cut by knife cylinder Cutting width 7,0 mm Supply and unloading conveyor Machine dimensions in cm: Width: 120,0 Length: 170,0 Height: 130,0 Voltage: 400 V, 50 Hz
EGLI Model V1 Usage :Frozen Butter Bulk Shreader /cutter Condition : Good Location : Dairy Machinery UK
Circular Wood Saw manufactured in 2021. This CAN CUT MC 930 features a cutting width of 1,100 mm and a maximum cutting height of 50 mm. It operates with a feed speed of 5-20 m/min and can accommodate up to 15 saw blades with a maximum diameter of 250 mm. If you are looking to get high-quality cutting capabilities, consider the CAN CUT MC 930 machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 2012. This HWACHEON CUTEX 160 B VDI features a swing over bed of 550 mm and a maximum spindle speed of 4500 rpm. It offers travels of 170 mm in the X-axis and 335 mm in the Z-axis, along with 12 tool positions. If you are looking to get high-quality turning capabilities, consider the HWACHEON CUTEX 160 B VDI machine we have for sale. Contact us for further details.
Aluminium sawing machine with 2 saw motors that make a 45° cut independently of each other. Material feed unit with up to 8,100 mm Cross conveyor, depositing table, chip conveyor and suction Soundproof booth Control via Siemens S7 panel Instruction manual etc. available, further technical data on request The machine was in operation until it was dismantled Further technical data on request or see photos
N. 14 cut bar trolleys Measurements: 1.77 width x 2.07 depth x 2.3 height m. Each slot is calibrated to 10 kg.
D and D Stainless cutter Stainless guillotine, mounted on conveyor, previously used for cutting cakes and honeycomb, conveyor dimensions 2200mm x 640mm, adjustable dwell and cutting time, variable speed, 3Ph
sheet width: 3000 mm plate thickness: 3 mm weight of the machine ca.: t 3 support arms 1 angle stop pneumatic hold-down device Backgauge to be operated by hand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Magnopro I-CUT12090 Fully automatic die-cutting + creasing of folding cartons Year of construction 2022 Connection 230 V Material thickness depending on model: 10 mm Data format PLT, DXF, HP/GL, PDF, EPS Feeder Sheet feeder for suction air/unwinding device (opt.) max. format: 90 x 120 cm Dimensions W x D x H: 320 x 150 x 115 Alignment CCD Camera System Speed up to 1000 mm/sec Positioning suction belt Programming barcode reader, QR code Accuracy +/- 0.1 mm Bow and roller feeder !
length: . mm height: . mm volt: U2 100 V ampere: I2 40-120 A volt: U1 380 V volt: U0 280 V ampere: I1 37-48 A Manufacturer number.17763 See type plate The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 500 machines in stockMore than 8,500 m² of storage space, crane capacity 70 tMore than 10,000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Schneidmaschine - Guillotine Wohlenberg CUT-Tec 76 Year 2005 - Serial-No. 3901-006 Schnittbreite max. 760mm / Cutting width max. 760mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
1. Qty. 1 Second-hand slitting line Mfc.: DANIELI WEAN UNITED, LOOPCO, Built: 1994 Relocated: 2021 Raw Material CR, GI, COLOR COATING COIL Strip Width: 400 - 1,210 mm Thickness: 0.5 - 1.8 mm Slitter Stand (OD420 x ID255 10/15T=Each 30EA) Scope of supply: Uncoiler Coil Car with Coil Skid Uncoiler with Snubber Roll Coil Opener & No. 1 Pinch Roll Crop Shear Threading Table No. 2 Pinch Roll & Side Guide Slitter Stand Scrap Winder Loop Table Tension Pad with Separator Bridle Roll with Guide Table Recoiler with Separator Recoiler Coil Car with Coil Skid Hydraulic Equipment Electric Equipment 2. Qty. 1 Second-hand cut-to-length line Mfc.: DONGBU ENG Built: 1997 Relocated: 2021 Raw Material CR, GI, COLOR COATING COILS Strip width: 600 – 1540 mm Thickness: 0.5 - 2.0 mm Coil Weight Max. 15,000 Kg Sheet Length: 500 - 2,800 mm Scope of supply: Coil Car Unco ...
APV 16 Servo Driven Wire-Cut & Continuous Rope Extruder with Guillotine Cutter APV 16 Servo driven Wire cut and continuous rope extruder with guillotine cutter / Frozen Dough wire cutter originally designed to cut cookies onto waz papaer. - Built new in 2010 - Originally designed to cut pucks of cookies onto wax paper sheets - All servo driven - Allen Bradley controls w Touchscreen - 16 wide two roll extruder - Wire-cut with oscillating knife - Continuous extrusion capable for ropes - Paper feed roller for cutting products onto wax paper - Guillotine cutter for wax paper but can also be used to cut ropes of product to specific lengths - Raising and lowering bed - Die with (5) outlets measuring approximately 0.625 x 1.25 - 3/60/480v - Machine on casters - Footprint approximately 11 long x 4 wide Find more here - .ucymachines/ Contact us at - sales@ucymachines
An antique corner puncher Made by CHN. Mansfeld of Leipzig Germany about 100 years old. In fully operational condition. No damages; a very nice piece of Graphic history that still can be used today in production.
Manufacturer: Fischer Rückle, Type: Cut Master, Year: 2007, Control: Fischer Rückel, Cross cutting guillotine: Qeurschneidanlage und Verbindungsmaschine, Cutting lenght mm: 250-2800, Working hight mm: ca.1,5, Digital readout lineal guide: yes, FREE TEXT: verlleimung über Fadensystem, Year :2007
Size: 600 x 500 mm Technical details: Min. size: NULL Max. size: Maximum sheet size: 600 x Net Weight: 8.200 kg Measurements: L: 3.320 W: 2.440 H: 2.13 Equipments: Krause autofeed die cutter Max. Size: 60 x 50 cm (23 x 19 inch) Processable materials: Paper, heavy cardboard, corrugated board, plastics, and leather Maximum cutting pressure: Approx. 40–50 tons (engineered for high-precision heavy die cutting)
A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible.
Cutting length: 2200 mm Cutting height: 30 mm automatic: nein ja/nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SALMON SLICER, CP FOOD MODEL: SILK CUT SLICER TYPE: SC 180 Technical description: Serial number: :7527 Power supply: 230/240 V, 1 Ph, 50/60 Hz, 7.5 A, 1.0 kW Inlet: Plastic wire belt, belt widht: (2x) 180 mm Outlet: Plastic belt, belt widht: (2x) 200 mm Plastic rollers, rolers widht: (2x) 200 mm Dimensions: 1800 x 1000 x 1550 mm The machine is designed for slicing smoked salmon, trout and Greenland halibut without bones or skin, and with a temperature of about ÷2 - +2° C. Its important that the fish has the correct temperature.
Schneidmaschine mit Rüttler - Guillotine with Jogger Wohlenberg 137 CUT-TEC Year 2002 - Serial-No. 3834-006 Schnittbreite / Cutting width max. 1370mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table große-Luft-Seitentische / large airbed side tables Lichtschranke / Light guards Ersatzmesser / Spare knives CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Schüttelautomat Rüttler mit Ausstreichwalze / Automatic Jogger with Press Rollers Baumann BSB 6 L Year 2003 - Serial-No. 211.917 Bogenformat / Sheet Size max. 1050 x 1450mm Lagenhöhe / Ream height max. 160mm
We are offering for sale a Perfecta cutting line, all components built in 2013, consisting of: 1.High-Performance High-Speed Cutter Perfecta 168 TS Cutting width: 1,680 mm, usable rear table length: 1,680 mm Working height: 165 mm, min. offcut strip: 26 mm Pressing force: 3.5-60 kN Material clamp + rotating saddle, 6 carbide knives, with 5 knife boxes Table height: 890 mm Side tables on the right: 1 x 1.5 m, left: 1 x 0.5 x 1.5 m + 0.5 x 1.25 m Net weight: 6,900 kg - Total: 6 knives, all in good condition, 2 of which are almost As good as new The unloader can also be rotated 90 degrees parallel to the paper discharge direction if required. 2.Perfecta ZTS 2750 Clamp Transport System For automatic feeding of the high-speed cutter via the rear table.The cutting line is in very good condition and still in production. Max. clamp travel: 2,750 mm Insertion height without adapter: ...
Connected loads: 220 V, 50 Hz, 6 A Strokes per minute (RPM): 5 - 30 Power drive motor: 0.55 kW Condition: fully functional, well-kept Availability: as of now
The machine is in good technical condition, testing possible after prior agreement. Table dimensions: 700 x 450 mm Z-axis travel: 255 mm Y-axis travel: 250 mm X-axis travel: 350 mm MACHINE DIMENSIONS: L: 2100 mm x W: 2000 mm x H: 2200 mm
maximum number of results exceeded
please refine your search
