plant mill used for sale

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

Parts: -Pelvis -Trolley -Filter -Rectifier -Product carriers -2x supply air system -3x exhaust air system -Refrigerator Specifications - 1 (line) - 1 x (wet turner) Cr Active - 111 Deco Chrome 112, 113, 114 Standing Sink 114 Sinks 116,117,118 Hot Rinsing 123 Dryers 124, 125, 126, 127 Speicher 129 - 141 Unloading Correction Station 142 - 150 El. Stripping 151 - 154 Sinks 155, 156 Stripping Nitric 157 - 161 Sinks 162, 163 Warm Rinse 164 Dryer 165 Speicher 166 - 172 Loading Correction Station 173 - 181 Memory 182 - 209 - - 2 (Line) Sinks 394, 393 PNS 392 Sinks 391, 390 MPS 389 Sinks 388, 387 Free court 386 Satin 385 - 383 Sinks 382 - 378 Gloss NI 377 - 374 Half Gloss 373 - 370 Bdobqwaov Ernfoltljg Sinks 369 - 367 Decapitate 366 Anodes 365 - 363 Sinks 362, 361 Copper 360 - 349 Sinks 348 - 346 Chem. Ni 345 - 342 Sinks 341 - 339 Accelerators  ...

Ekato Unimix Vacuum Processing System SRT 50 Order# 4808/2, Series# 70888. Year of manufacture 2004 Description • GMP compliant • EKATO PARAVISC agitator with EKATO UNIMIX scraper system Power 3 Kw, 5.2 Kw at 87 Hz Speed 21-121 rpm • Patented homogenizer EKATO UNIMIX S-JET, located at the lowest point of the container, for internal and external homogenization Power 5.5 kW, 9.5 Kw at 87 Hz Speed 1,000 – 4,800 rpm • Lid lifting device can be swivelled • Integrated CIP cleaning system • Integrated heating/cooling system Electric heating 12 Kw Control Siemens S7 with OP 17 Pressure and vacuum resistant with integrated vacuum system Product space: Capacity 85 litres / 50 l usable volume, Pressure -1/2 bar, Temperature 10/152 °C, Thermal system / double jacket: Capacity 11 l Pressure -1/+4 bar, Temperature 10/152 °C, Complete document ...

Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!

The complete conveyor technology is from CSF. The control system of all system components including a visualization, all control cabinets, all FUs and many other components have been completely renewed in the last 5-7 years. The plant was decommissioned in Q1-2025, but can be restarted at any time if necessary. All system components are on standby and can be immediately put into operation and presented to a potential interested party. The system has one hand and two automatic cabs. The complete part size 7000x2300x800 mm can be moved and coated across all cabins. The system is designed in such a way that all 3 cabins can coat at the same time. Hanger throughput approx. 14 hangers per hour Water dryers as well as powder dryers are each heated indirectly via an oil-air heat exchanger. The system has no maintenance backlog and has been regularly maintained by our own maintenance ...

Bread round and long-wred machine Kemper Superba used Kemper bread round-wire and bread-long-wifting machine for sale immediately in stock. -Band round wire 270cm long -with Kemper SUL

Kemper Becherwerk for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft dough space-saving design optionally 1 or 2 pieces of dough Crossband left-hand run / crossband right-hand-running

Qty. 1 Second-hand cast house for billet production incl. filtration system Mfc.: Gautschi, Mechatherm, Weishaupt, PEHAKA, FISONS, Dantherm Filtration GmbH Built: Unknown The machine is very strong design and still running well because it has been maintained always with original spare parts and qualified experts. Direct casting on a vertical table and make billets of 6'' and 8''. To make 9'' the tool of the table can be modified. The vertical caster can work with 9'' by remachining and modifying the tool table. 1 Melting and Tilting furnace GAUTSCHI, Capacity 20 T, Fuel Oil Burners The furnace has an elevator charging machine to load the scrap from the top of the furnace Degassing unit FILD from MECHATHERM England Nitrogen treatment and filtering 1 Vertical caster for billets 26 x 6’’ and 20 x 8’’ for useful log length 6 m 1 Homogenizing furnace, Fuel Oil Burners Weish ...

Qty. 1 Second-hand Copper Strip Production Plant – Still in Production Mfc.: J. F. Norton, Shinkwang Tech, Partec, Rozai, Chungwon Control & Sunil, Handuck R-FECO, Mirae Tech Inc., Changjo, Wuishi, Youngchang Machinery, Dongshin Tech., Sonoda Engineering Co., Wuxi Longar Mach., Backsan Machinery, Youngdong Coil Center, Deakwang Machinery, Hanguk E.N.G, Built: 1962, 1965, 1990. 2000, 2001, 2008, 2017, 2018, 2019, 2020 Revamping: 2017, 2019, 2020, Scope of supply: Roughing Mill Mfc.: Famer Norton Type: 4-Hi Irreversible – WR Drive 318 x 610 x 635 mm Built: 1965. 06 Revamping: 2017. 09 by Shinkwang Tech Strip width: 200 – 530 mm Thickness: 3.0 – 12 mm Intermidiate Mill Mfc.: Shinkwang Tech Type: 4-Hi Irreversible, WR Drive - 225 x 570 x 720 mm Built: 2017. 06 Revamping: 2020 by Partec Strip Width: 200 – 650 mm Thickness: 0.8 – 5.0 mm Finishing Mill ...

VELO flotation system PRI 100 for clarifying grape musts Capacity: 20.000l/h UNI-DEPP-KAR Manufacturer: VELO S.p.A. Type: PRI 100 Year of construction: 1998 Fabr.No. V6226 Capacity: 20.000l/h mobile with compressed air generator Measurements: Height: 2180 mm Length: 1500 mm Width: 1220 mm All the equipment s. photos

1. Screen changer "Kreyenborg" K-SWE 180 2. Water ring granulation "AGRIFON" 3. Classification sieve for the separation of Granules over-good and lower grain sizes Throughput: Depending on material mix , 500 kg/h

1 used Framax Tribloc bottle filler, built in 2012, consisting of Borelli 9-digit rinser and 8-digit low vacuum / gravity filler type CIAO-xp with 1-digit Arol Eagle C 26 mm crown corker. Plant last used for filling beer (bottle fermentation) in 61 mm diameter 330 ml as well as 71 mm diameter 500 ml glass bottles at an output of 1,920 bottles/hour. Filler also suitable for bottling wine.

1 of used Framax tribloc bottling machine, new 2012, consisting of a Borelli 9-head rinser / 8-head low-vacuum/gravity filler CIAO-xp with single-head Arol Eagle C 26 mm crowner, Last running bottle-conditioned beer at 1.920 bph with handling parts for 61 mm diameter 330 ml and 71 mm diameter 500 ml glass beer bottles. Filler also ideally suitable for bottling wine.

TECHNICAL DATA: Autoclave dimensions mm: 350 x 2000 Autoclave volume lt: 175 Installed electrical power KW: 55

Double pipe heat exchanger pipe heat transfer for biogas plant, sewage treatment plant sludge hygienization - used - Manufacturer AEL GmbH Leisnig Type Double pipe heat transfer W202 Fabr. No. 7.0637.940/29-56 Built in 1997 Permissible betieb pressure 6 bar Permissible operating temperature 90°C Content 1090 l Kerb weight 6510 kg Length approx. 11 m Width approx. 3 m Depth approx. 1.5 m

A Complete Turnkey Solution: ‘FIVES DMS Montbard & SMS MANNESMANN MEER’ 8" Seamless Tube Plant Once known as Vallourec Bearing Tubes Montbard, this facility can produce hot and cold rolled seamless high precision tubes up to 203 mm OD and 2 to 55 mm wall thickness based on a long-established state-of-the-art manufacturing process. Make (main): · FIVES DMS MONTBARD · SMS MANNESMANN MEER Mothballed since: 2025 Capacity: 80,000 tons per year Processed material: CrMo, CrMn alloyed steels Starting material: 80 – 240 mm round billets End products: o Hot Rolled Tubes up to 203 mm OD; 8.0 - 53 mm WT o Cold Rolled Tubes 25 - 102 mm OD; 2.0 - 20 mm WT Consists of: Billet Yard Hot Rolling Mill incl. Furnaces, Piercer, Elongation, Calibration, Sizing mill, Cooling bed (7) Cold Pilger Mills Heat Treatment Furnaces incl. Quenching ...

Big Bag filling station, filling and weighing system used The system consists of the following components: 1 filling hopper approx. 2300 height 2500 mm 2 stainless steel trough screws 1 tumbling/shaking sieve approx. 1200 height 1900 mm 1 BigBag filling station approx. 1950 x 2400 x 3700 mm 1 control cabinet The Big Pack filling is filled by wheel loader or forklift via a pouring funnel. The filling material is transported via a conveyor screw to a tumbling sieve. From there, transported with another screw to the actual weighing and filling station. The big bags lie on a vibrating floor when filling and are thus compacted.

New machine Stainless steel model 24-month warranty Properties: + TOP value for money + Solid cone round wire in stainless steel version + with control panel and automatic flour spreader + Model "S", suitable for small dough pieces (approx. 100 - 350 gr) + optimally suited for wheat dough up to a TA of approx. 170 (depending on the dough) + extra long rounding/running distance of 6 meters for best round ingestion properties + gutters and cones are teflon-coated + Base is mobile and also available in stainless steel + mounted on robust rollers with fixed SPECIAL equipment (not retrofittable!): - Blower / ventilation of the gutters and cone (recommended for dough with TA > 155): + EUR 1,745,-- Technical data: Weight range: 100 - 350 grams (dough/product dependent) Hourly output: approx. 1,800 pieces (dough/product dependent) Orbit: 6 meters Dimensions: 105 x 105  ...

New machine Stainless steel model 24-month warranty Properties: + TOP value for money + Solid cone round wire in stainless steel version + with control panel and automatic flour spreader + suitable for medium-sized dough pieces (approx. 300 - 1,100 gr) + optimally suited for wheat dough up to a TA of approx. 170 (depending on the dough) + extra long rounding/running distance of 6 meters for best round ingestion properties + gutters and cones are teflon-coated + Base is mobile and also available in stainless steel + mounted on robust rollers with fixed SPECIAL equipment (not retrofittable!): - Blower / ventilation of the gutters and cone (recommended for dough with TA > 155): + EUR 1,745,-- Technical data: Weight range: 300 - 1100 grams (dough/product dependent) Hourly output: approx. 1,800 pieces (dough/product dependent) Orbit: 6 meters Dimensions: 105 x 105 x ...

- brand new - 20,000 litres steel tank - storage tank - diesel tank according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight approx. 4.2 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue. (On request, other RAL col ...

Fat baking device Esback Köhler 661 101 -Fat baking device with fermentation cabinet -with 1 tipping plank trolley and 10 tipping boards -optional with 2 tipping plank trolleys and 20 tipping boards -380 Volt 50Hz -Fat tubs inner mass: 72x63cm

Quality Used Power Plant with two (2) Solar Centaur 40, 3.0 MW, (Each), 13,800v 60 Hz. Enclosed. Equipment Description Complete power plant with 2 turbine generator systems. Everything included The equipment has very little hours since installation. They will need to be moved off the site. They are located in The USA. They were overhauled in 2020 installed and never used. The following is included: Control Panels, New Square D Switchgear, 15kv, 1200 amp. for synchronizing the generators to each other and the grid. Grid protection hardware and software. Inlet system with filter cleaning system New control system Exhaust system complete New Oil coolers Gearboxes have been overhauled Generator ends have less than 800 hours on them, one is new 0.0 hours A control room enclosure complete with all control switches New battery chargers.

Manufacturer: NERAK Type: WB 370 Built in 2003 CC-foot 2160 mm CC-Vertical 9600 mm CC head 3110 mm Plastic cup approx. 36 cm wide 20 cm deep approx. 10 cups per m Rubber block chain Speed: 0.3 m/s Power 5-10 m3/h (bulk density 0.5-1.0 t/m3) User manual and technical drawings available

We are pleased to present our complete commercial and technical offer for an unused 2 × 750 MW Combined Cycle Gas Turbine (CCGT) Power Plant, based on GE Frame 9FA technology, supplied, installed, but not commissioned. The plant equipment is available as a complete package, including major equipment, auxiliaries, and Balance of Plant (BOP). 1. Plant Configuration Overview Total Configuration: • 2 × GE Frame 9FA Gas Turbines • 2 × CMI Triple Pressure HRSG • 1 × GE Steam Turbine • Combined Cycle Output: ~750 MW per block Status: • Installed / partially installed • Not commissioned • Units have never been fired or operated 2. Gas Turbine Island Gas Turbines • Quantity: 2 Units • Manufacturer: GE • Model: Frame 9FA +e DLN2+ • Fuel: Dual Fuel • Frequency: 50 Hz • Site Rated Output: 241,000 kW per unit • Year of Manufacture / De ...

Hull engine in replacement Scania DC13-071A without turbo,EGR cooler+hoses,PDE's,controlr installed in Kleemann crushing plants. Price only on request

Compounder with segmented screw elements, cylinder with a degassing opening with hot tee, stainless steel housing, swivel

Extruding system with cross-spray head for sheathing of small profiles/filaments consisting of: 30 mm extruder with tool, water bath, extractor and winder Optional with memory for role change

According to description pdf attached complete line for profiles + WPC profiles

-Fat baking device from Esback -with fermentation cabinet -with tipping plank trolley incl. 10 tipping boards -with 2 screen carriers incl. manual turn -380 volts

Complete PET Soft Drinks Filling Line for sale by Indassol 1.5 Litre & 2 Litre Concentrated Soft Drinks (non-carbonated) 16,000 - 18,000 bph, Blowing - Filling - Packaging Krones, Krupp, Procomac, Zalkin, Alfa Rollquatro, Hueft, Kisters, Newtec Palletiser (1 Litre Filling Line also available) PLEASE NOTE Both Lines were used by Princes Soft Drinks for the production of Non-carbonated Concentrated Soft Drinks. The Krones Fillers on both Lines are Counter Pressure Fillers and the Lines could be adapted to produce Carbonated Soft Drinks by the addition of a Carbonation Unit to the process plant. ADDITIONAL ITEMS AVAILABLE 2 off Bellis & Morcom High Pressure 40 Bar Compressors. Machines are from 1987 but have been subject to a full Service Agreement with Gardner Denver. Lachenmeier H-Multi Flex Pallet Wrapper/Hooder (shared with Line D6) Serial No. 39031 (2 ...

Lacquer roller machine, roller application machine, powder coating plant -Powder coating system: used for slats/blinds production -Pneumatic components: Manufacturer Festo -Geared motor: WEG 0.25 kW -Dimensions: 3400/850/H1935 mm -Weight: 746 kg

Used filling line for glass bottles, capacity 0.33 - 1 l. Line description: - 4XP25 packing machine with the following parameters: - stepless adjustment range - 3500- 8200 b / h, and 5300-12300 b / h - maximum capacity for sparkling water with 6g / l CO2 and temperature 235oK / 11500 g / h for bottles. 0.33l; 5000 g / h for the cylinder 1.0l / - installed power - 2.2 kW 380 V - CO2 consumption - 40 kg / h - pressure of CO2 or sterile air in the tank higher than the fluid pressure by 0.150 MPa - air consumption - approx. 13 m2 / h - air pressure - 0.5 MPa - number of nozzles - 36 pcs. - number of closing heads - 8 pcs. - noize - 90 dB / A - overall dimensions: width - 2895 mm; length - 2125 mm; max height - 2530 mm; curb weight - 5100 kg - service - 1 person

Screws: 2x x 58 mm / 26D Engine: 250 kW DC Capacity: approx. 800 - 1000 KG Material: PE, PP, PS, ABS // Details: DC motor, concurrent, segmented screws and cylinders (2x x 58 mm / 26D), screw speed: max. 900 rpm, degassing, vacuum pump, BKG underwater pelletizing system OPTI-LINE 1 consisting of: Kreyenborg start-up, water box, cutting head, water circulation system, heat exchanger, process water tank, centrifugal Control: Siemens S7 with visualization

We sell several 20 foot office and stay containers of different designs at reasonable prices. There are single containers, double containers, triple containers and quadruple containers. The containers are partly equipped with office furniture or cabinets. The location of the containers is Belgium. But we can organise mining and transport. Basic dimensions of the container length approx. 6055 mm, width approx. 2435 mm, height approx. 2350 mm. Price from 1500,- € + VAT depending on the number of units and execution.

1 piece of factory-new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surpluses MREC 15 - MOBILE VERSION Manufacturer: RSM Type: MREC 15 Year of construction: factory new Washout capacity approx. 15 m³/h WAM washout screw Separation cut 0.3 mm - 1.00 pieces filling funnel - 1,00 pieces high basin (25m³) - 1,00 pieces intermediate pool (2m³) - 1.00 pieces of waste water mixer with console - 2.00 pieces of submersible sludge pumps - 1.00 pieces submersible pump - 1.00 pieces of control for residual concrete recycling plant - 1.00 pieces of flushing gallows - etc. The final painting is carried out according to customer requirements. Price on request Delivery time: immediately available Offer and prices are purely net from location Intermediate sale reserved, errors and/or misrepresentation reserved,

Brand new wooden powder trays for mogul plants, quality, long-life cycle, material, precision analog to Treiber, stackable, appropriate for all mogul lines, tested for NID, W&D, MAKAT, BOSCH, partially already certified by the manufacturers of the line send your price inquiries to company SCHOKOMA GMBH indicating quantity of trays, bottom material, dimensions inside and outside, delivery possible

Wet acceptance system, swimming / sinking system, swimming / sink container with discharge belt, belt scrubber, belt washing machine for fruit and vegetables used Manufacturer: SCHNEIDER Maschinentechnik Type NA 650 Filling height approx. 2 m Funnel approx. 2.4 x 1.9 m Depth to the band approx. 1.2 m Bandwidth approx. 600 mm Drive via infinitely variable gear motor Total dimensions: approx. 4 x 2.1 x 3.1 m The plant was used in fruit and vegetable production. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

1 of used bottling line for beer, consisting of loading table, Harlands Proteus single-station wrap-around pressure-sensitive labeller, Moravek BF15 sterile filter, Moravek BC15 carbonator, Moravek 12/12/1 rinser / filler / crowner, Linx CJ-400 ink-jet coder, Cheops tray/pad loader with shrink-wrapper, interconnecting conveyors. Used for 330 ml (D 60.7 x H 227 mm), speed 2.500 - 3.000 bph, and 500 ml (D 69 x H 245 mm) speed 2.200 - 2.500 bph, packed as either 4x2=8 or 6x4=24 bottles per tray or pad. Equipment new 2015.

We sell a baguette system of the company JAC type BA 402 incl. baguette long scooter. Used and refurbished.

turning diameter over bed: 920 mm turning diameter over slide rest: 600 mm turning length: 12000 mm loading capacität: 20 tons turning speed range: 3,6 - 172 U/min volt: 380 V total power requirement: 90 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used first-class renovated extrusion recycling plant EREMA for the processing of polyethylene and polypropylene. Capacity of approx. 1,100 kg/h. WITHOUT DEGASSING. Processing of only CLEAN material; without printing ink. Auch Folien + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

according to pdf attached

Extrusion recycling machine EREMA 1514T for processing of CLEAN unprinted polyethylene and polypropylene, WITHOUT DEGASSING, no converting of printed materials. capacity up to approx. 1.100 kg/hr. The machine is refurbiushed in ecellent condition. Auch Folien + Technik e. Kfm. D-73723 Esslingen phone +0049 1577 5329827

pdf description attached

The original part is a main and KO extruder from Kuhne built in 2006, the system was extended in 2010 by an additional extruder from the SML (coating unit). Plant description: COEX cast film line with additional coating unit. The main plant is equipped with a co- and a main extruder. The coating unit with a main extruder. Processing of thermoplastics in a processing range of 90-300°C. The system can be operated with the following combinations: • Main unit (CoEx system) with coating unit • Main unit (CoEx system) without coating unit • Only coating unit with unwinding unit for carrier film For operation in the various combinations, the corresponding additional units are switched on or off. Possible layer structures: Main plant: - Monofilm with release film if required - 3-layer film (A-B-A) with release film if required Coating: - Monofilm on carrier material if req ...

silo, bulk material silo, gravel silo, sand silo, storage silo, aggregate silo used Manufacturer: unknown Volume approx. 1500 - 1600 m3 27 individual chambers each approx. 2.2 x 2.2 m (one of them staircase) Silo Material: Steel Square Total dimensions: approx. 20 x 9 x 15 m We have various silos in different sizes made of a large mortar and plaster mixing plant. Of course, also various other components, such as filters, elevators, weighing containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.

The extrusion line is a COEX cast film line. Processing of thermoplastics in a processing range of 150-300°C. Possible layer structures: - Monofilms - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) Plant data: Total system output max. 2230 kg/h Extruder A: 90/33 L/D max. 330kg/h Extruder B.: 135/33 L/D max. 950kg/h Extruder C.: 135/33 L/D max. 950kg/h Film width NET: 1600 - 2110mm; Center cut for 2 bobsleighs possible (2x 800 – 2x 1055mm) Thickness: 25-580μm Production speed 10 - 150m/min Roll width 2500 mm roll weight 2000kg Additional components (quality): non-contact thickness gauge for automatic nozzle with automatic cross profile control on both sides Corona pretreatment (max. 12000W) Optical surface inspection system incl. defect marking in open and pass-through light Ancillary equipment: Dryer 1 – 4 with 4500 liters volume ; Heating capacity 48kw dryer 5 ...