plant mill used for sale

For sale is a workshop-overhauled and function-tested, free-standing VA diatomaceous earth dosing device. The device is immediately ready for use. Specifications: Manufacturer: Schenk Year of manufacture: unknown Type: DO-S-250 Boiler capacity: approx. 250 l (with lid almost 1/2 hinged with hinge) Hourly output for KG filtration: 200 hl for beer, wine and fruit juice Dimensions total: L max. = 1.20 m / W max = 0.80 m / H max. = 1.685 m Beer pipe: Input/outlet DN 50 KM/G - Dosing connection in the beer pipe DN 25 KM Connections in the boiler: 1 inlet at the top side DN 50 G with 90-degree bend (inside) downwards 1 remaining outlet DN 50 G with shaft closure and handle from above 1 connection DN 32 KM above 1 DN 50 KM connection at the bottom side with a 90 degree bend upwards - then reduced from DN 50 to DN 10 G Boiler dimensions: Diam. inside = 0.65 m ...

used Benier brotteig precursor with adjustable wits completely in stainless steel.The machine is immediately available in the warehouse in Bielefeld.Further used bakery machines please see the catalogue on the right we have more than 700 machines in stock in Stock. Built in 2002 400V / 50 Hz Stainless steel cladding with 2 blowers Scrapers are adjustable checked and cleaned Condition "good" Dimensions: Height: 150 cm Width: 220 cm Depth: 110 cm

Hyundai Steel Dangjin Facility (widely known as "Thin Plate Mill") is a premier steel production plant featuring a Compact Strip Process (CSP) as the main production line, complemented by a 150-tonne heat-size electric Meltshop, a thick Slab Caster, and two Skin Pass Mills. Initially commissioned by Hanbo Steel in 1995, this facility was acquired by Hyundai Steel in 2004 including a major modernization in 2011 and more recent upgrades, ensuring its continued excellence in production. Assets Available for Sale: • Electric Meltshop 150 tonnes heat size – DC EBT Electric Arc Furnace, Ladle Furnace, Vacuum Degasser and associated equipment. • CSP – A Thin Slab Cast & Rolling line combining casting, heating, and rolling. 55mm thickness slabs directly enter a tunnel furnace and are rolled in a Hot Strip Mill for final strip thickness from 1.4 to 16mm and up to 1,560mm width ...

Bread-long wrapper W&P BM 51 B -with blue plastic straps -mobile on wheels -for bakery baking industry

Resin production plant. Capapcity 1200 tons per month. Plant can produce acrylic resins, alahide resins, poliuerethane resins on  buthyl octate base, acetone base, and xylane base. Plant can produce 55-60% resin concentrate wchich acan later be diluted in another factory. Plant has 3 main pressure reactors each 10 ton of batch. Plant has a storage tanks 160000 L tanks. Plant is build in Atex execution. More information available upon request. Advise on resin production technology, recepies and technological advise is possible on separate agreement and price. Below you can find a photo gallery of the factory, more information please call.

Availability: immediately Hours: 0 Cup-Cake dosing line suitable for the production of round CUP-CAKES Ø 45 - 90 mm and small cakes (muffins, Magdalenas, Cake-Donuts, Mini-Cake Donuts, cake bars etc.) arranged on trays measuring 400x600 mm, with 6 x 9 wells. DESCRIPTION OF THE MACHINE: PART 1 No. 1 conveyor belt with plate chains, which is positioned at the entrance of the dosing line and serves as a buffer for about 4 sheets, with the following characteristics: ● Infinitely variable movement by means of a motor with frequency converter. ● Usable width: 600 mm. ● Length: 1500 mm. ● Mounted on wheels. PART 2 No. 1 Intermittent chain conveyor with slides, with the following features: ● Adjustable guide walls. ● Drive with a motor with frequency converter. ● Intermittent movement, electromechanically controlled, with programmable conveying step. ● Acceler ...

Pressure Bottle Filler. 24 fillers. System FALSCH FLASCHEN. Whole machine made in inox. Machine after total renovation in 2019. Warranty: 24 months.

- 5 aluminium silos with attachment filter incl. discharge screw with slide made of V2A - 4 aluminium silos for manual filling with discharge screws - 3 dosing scales - Optional with dust filter

Y.O.M.: 1989 Temperature Homogenizer speed-controlled Agitator right-left speed-controlled very good condition Dimensions LWH: 900 x 500 x 1450 mm Control cabinet: 800 x 300 x 1550 mm Weight: approx. 500 kg

Y.O.M.: 1980 No.: 10027 Usable volume: 150 l Pressure double jacket: +1 bar Vacuum pump Pressure gauge, temp gauge Scraper agitator, three-way valve 3 intake ducts Lid to be opened via lifting pull Dimensions LWH: 1700 x 1000 x 2100 mm Weight: approx. 500 kg Products: e.g. mayonnaise, sauces, ketchup, cosmetics, creams etc.

Y.O.M.: 1991 No.: 4745 2 hoppers, 1x with double jacket Scraper agitator speed-controlled Homogenizer speed-controlled Double jacket pressure-resistant Temperature controller, vacuum Condition: very good Dimensions LWH: 1100 x 600 x 950 mm Weight: approx. 300 kg

Y.O.M.: 1999 No.: 900/1 Scraper and Homo speed-controlled Vertical stroke, double jacket, swivel Temperature gauge, Vacuum, Ystral-Turrax Temperature control device GWK Type teco CS 90 Y.O.M.: 2002 Heating capacity: 9 kW Cooling capacity 23 kW, temperature maximum 95°C Dimensions LWH: 1200 x 800 x 1000 mm Weight: approx. 100 kg

Specifications: Support surface table: Width x Depth x Max. Clamping Distance: 192 x 115 x 120 mm Height center cutting wheel above table: 520 mm Cutting disc height adjustment via Cylinder with measuring system: 445 mm Cutting Wheel Dimensions: Min.: 350 x 2.8 x 32 mm Max.: 400 x 4.0 x 32 mm Workpiece dimensions max. length: Workpiece feeder: 3500 mm Workpiece discharge: 2000 mm Workpiece dimensions min. length: Workpiece feeder: 300 mm Workpiece discharge: 300 mm Workpiece feeder: Servo - controlled Measuring distance via measuring system: 3500 mm Circumferential speed: 25 - 60 m/sec Main motor: 10 kW Dimensions of separation system (WxDxH), approx.: 850 x 1600 x 2815 mm Weight: Machine: 980 kg Workpiece feeder: 380 kg Workpiece discharge: 350 kg Control cabinet: 280 kg

Dairy Mschinery UK now offers new Glass Bottle Fillers for Milk and Juice. We offer machines for Hot fill and Cold Fill. Our bottle capacities are between 1000 - 7000 bottles per hour. Manufacture : Dairy Machinery UK Volume : 500ml - 1000ml Capacity : Option on order between 1000- 7000 bph Capping : 38mm magnetic capping chucks Filling Nozzles : Gravity Filling on Rubbers Lift and Fill or Gravity Filling Drop and Fill Cap : Aluminium Screw Cap CIP : Available Controls : Control panel Standards 2019 Certified : EC certificates Installation : We install all our machines at the clients facilities. Warranty : 12 months Spare Parts : spares@dairymachineryuk.co.uk

Conveyor belt / climbing belt (inchGiraffeinch), built in 2013, in a very good used and functional condition. All metal parts made of stainless steel. Plastic conveyor belt, 45 cm wide, with takers. Rise height 210 cm. Machine is rollable. Speed infinitely adjustable. Connection values 400 volts, 0.55 kW. Workshop-tested, ready for immediate use. More on request.

Scraper and homogenizer (Ystral) speed-controlled Vertical stroke, double jacket swiveling with heating and vacuum pump on a mobile cart switchgear, timers, etc. Condition very good Dimensions LWH: 700 x 600 x 1900 mm Weight: approx. 150 kg

Fat baking device Berlinerbackstation Esback -Built in 2009

A steam-powered freeze drying plant HOF with 1.8 m2 usable space. With stainless steel chamber door, ice capacitor, set of actuators (6 pcs.) sep. Panel.

Complete chocolate production plant, plant components: - Beetz MK 2/500 chocolate mixer, refurbished 2023 with new electrics and new dust filter. Connecting belt to the 3-roll mill - Bauermeister DW 51 three-roll mill, refrubished 2023 with new electric and water station, connecting belt to the 5-roll refiner - Bühler SFG 1000 five-roll mill, refrubished in 2023 with new electric and water station, connecting belt to the conche - Frisse DÜC 1R Conche, refrubished 2023 with new electrics and new metal sieve separator - RF Block Melter/Fat Melter, new 2023 - RF bag feeding station (suction conveyor system), new 2023 The entire system is dismantled and stored in our warehouse in Germany. Documentation available. The facility is sold in existing condition, free loaded truck, packing and/or, container stowage are not included in the price

Material: PE, PP, PS // DC motor: 132 kW, power: approx. 300 - 500 KG/hr, screw 90mm, L/D30, strand nozzle, water bath, strand granulator.

used wood carburetor Plant Bj 99 with control cabinets and Perkins gas engine, Generator Stamford 670 kVA Plant was only in operation for 6 months also associated wood chip drying plant available

Compounding system with underwater granulation. Material: PE, PP, PS, ABS (+ fillers) // Details: DC motor, DC rotor, segmented screws (2x x 70 mm / 40D) and cylinders, degassing, vacuum pump, stuffing unit, backwash screen changer GNEUSS RSF 150, underwater granulation GALA with cutting rotor, water circulation system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization. Available at an additional cost: Sidefeeder, 4-fold gravimetric dosing system. (Ref. No. G27615.2)

CoEx plate system net. 1350x1-10 mm Material: PE, PS, HIPS, ABS / Details: Main extruder RH EH2400-1-150-33V, co-extruder RH 121-1-50-30V, vacuum pump, CoEx-block, double hydr. Sieve changer with hydr. Station, wide-slit nozzle 1,450 mm, 3-roller smoothing unit RH GK-1600-60-G1 1,640 x 600 mm, Kelvi Plast temperature control unit, cooling section, side strip trim with knife beam, rubber roller extractor RH AT160-20, guillotine RAS 83.20, vacuum conveyor, CoEx dryer material, stacking device. (Ref-No. T27614)

Compounding plant Material: PE, PP, PS, WPC + fillers / Details: segmented screws and cylinders, three-phase motor 250 kW, dcrunner, screw speed: 300 rpm, degassing, 2x busch vacuum pump, side feeding Berstorff ZSFE 120 SO, metal separator, noise protection hood, ECON air granulating system ELG 3000, control: SIEMENS S7 with visualization. Up for a surcharge: extension to 40D possible

Compounding plant for fiberglass contaminant PE/PP Snail/LD 70/38 Material: PE, PP // Extruder with high-wear process unit (HIP), segmented screws and cylinders of 70 mm / 40D, AC-motor 260 kW,, degassing, continuous rotor, vacuum pump, pressure transducer, 4-fold dosing, 3+1-fold gravimetric dosing, side-dose PSF 46, strand head, water bath, strand granulator, temperature control unit, water cooler, material conveyer, Siemens S7 central control with visualization

Film recycling and granulation plant Material: PE, PP, // Cascade extruder, snail/LD x 220+150/ x 26D, drives 232 & 99 kW, water separator, hot tee with underwater cooling, only 8,500 operating hours

Grease baking device Jufeba TK-2000 -Fat baking device Jufeba -Type: TK 2000 -20 kW -Outside mass: 198x91cm -Basin inside mass: 194x87cm

Material: PS, PE, PP, PA, // Details: DC motor 145 kW, screw revolutions: up to 600rpm, screw diameter 70 mm, L/D 32, segmented screws and cylinders, degassing (optional vacuum pump), control: Siemens S7 with visualization. incl. strand nozzle with water bath and strand granulator, motor up to 265kW possible. For extra charge: underwater granulation, or water ring granulation

Material: PE, PP, PS, ABS, / Details: double screw, runner, segmented screws + cylinder, hydraulic. Cassette sieve changer, strand nozzle, 6m water bath, strand granulator, additive dosing. 3-fold degassing (vacuum pump vs. extra charge), For an additional price: dosing system, water ring or underwater granulation.

Grease baking device Roka plant Tippfix Model DA 900 -14.4 kW -Outside mass: 80x204cm -Basin indoor mass: 70x194cm

Material: PE, PP, PS, ABS // Details: Screw diameter 2x 50 mm, L/D 32, DC motor 52 kW, Runner, segmented screws and cylinders, degassing, vacuum pump, screw speed: 400 rpm, strand nozzle, water bath, strand granulator. Power: approx. 150 - 250 KG/hr.

Residual item material from inventory sale for solar free-surface plant Screws, nuts, cable clips, washers, mid and end terminal profiles Package price

Material: PE, PP, PS, ABS + talc, fibers / Details: twin-screw extruder PLAMA ZSP 70, segmented screws and cylinders, DC motor 260 kW, degassing, vacuum pump, side feed, low temperature control unit SINGLE, 4+1 gravimetric dosing BRABENDER incl. working platform, screen changer GNEUSS RSF 150, start-up crossover, underwater granulation GALA MAP6 with cutting rotor, water system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization SIEMENS Multi Panel 270B Touch. Power: approx. 600 - 800 KG/hr

Distillation plant for WFI water or pure steam generation Manufacturer : DEWA Type: DP 30 EVS Technical specifications : Distillation or pure steam plant this system can be used to produce either distillate or pure steam. Production 30 litres/h Feed water consumption 35 l/h Cooling water consumption system at 95 °C Destwasser 200 l/h electric heating capacity 18 kW max. operating pressure 1.9 bar min. cooling water pressure 1.0 bar min. feed water pressure 1.0 bar min. pressure for control air 6.0 bar Total capacity evaporator approx. 27 litres Evaporator capacity at max. level approx. 11 litres Dimensions: Height 2240 mm Width 970 mm Depth 700 mm Empty weight 300 kg Documents: available

Material: PE, PP, PS, ABS / Details: three-phase motor 215 kW, segmented screws and cylinders, continuous rotors, screw diameter 50 mm, L/D 40, power: approx. 400 - 800 KG/hr, degassing, SIHI vacuum pump, gravimetric belt scale K-Tron WF 300 with stubble, strand nozzle, continuous cooling belt, cooling tank, squid granulator Scheer SGS 100, moisture measuring unit, control unit Siemens S7 with visualization.

Compounding system with GALA underwater granulation Material: PE, PP, PS, ABS // Details: segmented screws and cylinders, screw diameter 2x 40 mm, L/D 44, DC rotor, DC motor 104 kW with gearbox, worm speed: max. 1,200 rpm, 2-fold degassing, ground pressure transducer, start-up valve, water box, Gala A1PAC6 underwater granulation with water circulation system and centrifugal dryer, temperature control unit SINGLE STW 150/1-6-100-NS/E, 6-fachimetric dosing incl. control. Control: Macromatex. Power: approx. 200 - 400 KG/hr

Complete LVL Plant Don't hesitate to keep in touch with us for further information.

Complete Particleboard Plant Don't hesitate to keep in touch with us for further information.

Bread-long wrapper Sw&P BM 51-5 -Length 326cm -Bandwidth 60cm -400 volts -Roll width: 32cm

Extraction plant

3 x 2.5 MW complete HFO power plant , MAN ( SSANGYONG ) 12V8/32H coupled with AVK generator 3.3KV / 50 Hz , Year : 1997-2000 Running hours : 34,000~44,700 hrs

Packaging plant Technical data • Conveyor belts: 4 • Conveyor belts Length (mm): 2570 • Conveyor belts width (mm): 900 • Ewnopack WSU 2200 cutting machine: built in 1995 • Cutting machine cutting length (mm): 1400 • Strapping device Signode HB 4300: built in 2002 • Strap Signode HB 4300 for: 9 / 10.5 mm plastic tape • Pass-through size strapping device max. (mm): width = 800; Height = 780 • Components all: fully automatic chained

GAI vacuum filler + 1 screwdriver head Capacity: 18,000 b / h - 20 ml, 12 fillers

BRIKOL BT 1000 granulation line was built in 2019 in Poland by BRIKOL Sp. z o.o. (first launch in 2020). This extremely efficient and energy-saving system is designed for the production of pellets from various types of raw materials, i.e. wood waste, sawdust and bran. It features a number of components with the best technical parameters, which enable the entire production process to be performed fully automatically. In this way, the problem of waste disposal in the carpentry and sawmill industry can be solved while at the same time making a profit. The BRIKOL pellet production line is fully complete and has the following components: – MB37 hammer mill – drum dryer – kiln – pellet mill – pellet sifter – sawdust conditioner – tank – flight conveyor (2 pcs) – screw conveyor – binder hopper – cooling device – control cabinet with display and computer  ...

The extrusion line was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system  ...

Parts: -Pelvis -Trolley -Filter -Rectifier -Product carriers -2x supply air system -3x exhaust air system -Refrigerator Specifications - 1 (line) - 1 x (wet turner) Cr Active - 111 Deco Chrome 112, 113, 114 Standing Sink 114 Sinks 116,117,118 Hot Rinsing 123 Dryers 124, 125, 126, 127 Speicher 129 - 141 Unloading Correction Station 142 - 150 El. Stripping 151 - 154 Sinks 155, 156 Stripping Nitric 157 - 161 Sinks 162, 163 Warm Rinse 164 Dryer 165 Speicher 166 - 172 Loading Correction Station 173 - 181 Memory 182 - 209 - - 2 (Line) Sinks 394, 393 PNS 392 Sinks 391, 390 MPS 389 Sinks 388, 387 Free court 386 Satin 385 - 383 Sinks 382 - 378 Gloss NI 377 - 374 Half Gloss 373 - 370 Bdobqwaov Ernfoltljg Sinks 369 - 367 Decapitate 366 Anodes 365 - 363 Sinks 362, 361 Copper 360 - 349 Sinks 348 - 346 Chem. Ni 345 - 342 Sinks 341 - 339 Accelerators  ...

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!

Ekato Unimix Vacuum Processing System SRT 50 Order# 4808/2, Series# 70888. Year of manufacture 2004 Description • GMP compliant • EKATO PARAVISC agitator with EKATO UNIMIX scraper system Power 3 Kw, 5.2 Kw at 87 Hz Speed 21-121 rpm • Patented homogenizer EKATO UNIMIX S-JET, located at the lowest point of the container, for internal and external homogenization Power 5.5 kW, 9.5 Kw at 87 Hz Speed 1,000 – 4,800 rpm • Lid lifting device can be swivelled • Integrated CIP cleaning system • Integrated heating/cooling system Electric heating 12 Kw Control Siemens S7 with OP 17 Pressure and vacuum resistant with integrated vacuum system Product space: Capacity 85 litres / 50 l usable volume, Pressure -1/2 bar, Temperature 10/152 °C, Thermal system / double jacket: Capacity 11 l Pressure -1/+4 bar, Temperature 10/152 °C, Complete document ...

Bread round and long-wred machine Kemper Superba used Kemper bread round-wire and bread-long-wifting machine for sale immediately in stock. -Band round wire 270cm long -with Kemper SUL