plano milling used for sale

Offer 26048 Technical data: - 3 sides – machining in one clamping for lock and PZ punches, - etc. to be milled out in aluminium / plastic / steel profiles - Operation via two-hand lever - Material clamping by pneumatic clamping cylinder - Manual profile bar turning device for 3-sided machining - Working range - x (landscape) 250 mm - depending on position - y (longitudinal) 90 mm - depending on position - z (vertical) 120 mm - max. Profile height depending on position approx. 120 mm - max. Profile depth 100 mm - Spindle speed approx. 6000 + 12000 rpm - Pneumatic connection 8 bar - Drive 400 V / 1.5 kW - Space requirements approx. W 650 x H 1550 x D 850 mm - Weight approx. 340 kg

Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg

Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Stankoimport, universal milling head from milling machine 6P / 2 -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Stroke: 72 mm -Electric motor: see photo nameplate -Transport dimensions: 940/560 / H500 mm -Weight: 304 kg

End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool, cutter head -Handover: in its current condition as inspected -Cutting board: partially slightly damaged, see photos -Reversible plates: mostly missing, see photos -Type: 45-PP-160-140-10 Ø 160 mm 3 pieces -Type: 45-PP-125-113 Ø 125 mm 1 piece -Type: 45-PP-125-113-9 Ø 125 mm 1 piece -Type: 90-PP-100-22-8 Ø 100 mm 2 pieces -Type: 75-PP-080-37-6 Ø 80 mm 1 piece -Type: 75-PP-080-37 Ø 80 mm 1 piece -Dimensions: 395/295/H145 mm -Weight: 29 kg

Universal milling head, milling chuck, milling extension, angle milling head, universal angle milling head, milling angle head -Manufacturer: TOS, Universal milling angle head from TOS FB25-V milling machine -Recording output: SK50 -Recording: Input gear -Milling head: fully swivelling -Stroke: 55 mm -Recess recording: mm -Bolt circle: mm -Transport dimensions: 780/490/H430 mm -Weight: 224 kg

Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Waldrich -Spare part: comes from a milling machine -Milling head: swiveling -quill stroke: 150 mm -Spindle mount: SK50 -Motor: 11 kW 1470 rpm -Spindle speed: 25 - 560 rpm -Transport dimensions: 1550/600/H460 mm -Weight: 636 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Milling unit: unfortunately no type designation -Motor: 2x Holz-Her 2200 W / 2800 rpm -Drive belt: not included -Motor block: dimensions 400/340/300 mm -Milling unit: 530/440 / H300 mm -Weight: 81 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, finishing unit, buffing unit -Manufacturer: Homag, 2 milling units and 2 buffing units from BRANDT KS 25 edgebanding machine -buffing units: motor KMER 0.18 kW 1360 rpm -Polishing roller: Ø 145 mm, height and depth adjustable / swiveling -Milling units: Motor Perske / Homag, see photos of nameplates -Voltage: 220 V / 200 Hz -Price/Fee: complete -Overall dimensions: 1200/800/H590 mm Total weight: 175 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Protective cover: damage see photos -Manufacturer: Homag, milling unit from edge banding machine BRANDT KS 25 -Motor: Homag 0.75 kW / 12000 rpm -Voltage: 220V / 200 Hz -Pneumatic cylinder: Bosch -Dimensions: 900/570 / H325 mm -Weight: 44 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 36 / KM 35 -Motor: 2x Homag type LF-55L 0.55 kW / 12000 rpm -Voltage: 220V / 200 Hz -Number: 2x milling unit available -Price per piece -Dimensions: 500/350 / H570 mm -Weight: 55 kg

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping device, clamping supports, clamping tool, clamping box, clamping tower -U-profile: steel profile 160 x 160 mm -Interior dimensions: 95 x 125 mm -Length: 800 mm -Weight: 81 kg

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -Manufacturer: WMW PWS, 17 hob cutters -Hole: Ø 27 mm 4 pieces, Ø 32 mm 7 pieces, Ø 40 mm 6 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 400/400/H150 mm -Total weight: 52.5 kg

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -Manufacturer: Fette/JAL, 23 hob cutters -Hole: Ø 16 mm 13 pieces, Ø 22 mm 4 pieces, Ø 27 mm 6 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 250/170/H90 mm -Total weight: 9.8 kg

Spline hobs, gear cutters, modular milling cutters, gear hobbing cutters, gear form cutters, modular milling heads, shell end mills, cylindrical milling cutters, milling cutters, hobs, spline hobs -Manufacturer: WMW PWS, 29 hob cutters -Hole: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 490/300/H70 mm -Total weight: 30.7 kg

End mill, milling cutter, shank thread milling cutter, thread cutter -Manufacturer: JAL PWS P, 29 pieces shank thread milling cutters -Hole: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Various types: see photos -Sizes: see photo parts list -Price/Sale: complete -Dimensions: 240/180/H150 mm -Total weight: 4.2 kg

Universal milling head, milling holder, milling extension, angle milling head -Manufacturer: WMW HECKERT, milling head from milling machine FSS 315-V -Recording output: SK50 -Recording: Input gear -Milling head: fully pivotable -Stroke: 72 mm -Transport dimensions: 850/650/H520 mm -Weight: 277 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Katt, milling unit with 3 milling cutters -Motor: Type N132M 12 kW / 2960 rpm -Protection class: IP 44 -Shaft: both sides Ø 40 x 235 mm -Milling width: 20/10/18 mm -Dimensions: 840/320 / H380 mm -Weight: 99 kg

Milling machine, universal milling machine, tool milling machine, drilling and milling machine -clamping table: 705 x 310 mm -Device table: rotatable/tiltable/swiveling -X/Y/Z travel: 550/340/420 mm -Spindle mount: SK40 -Speeds: from 46 to 2110 rpm -Feed: 12 to 254 mm/min -Pinole stroke: 80 mm -Rapid traverse: mm/min -Coolant device: -Dimensions: 1620/1700/H1810 mm -Weight: 1768 kg

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Area of application: Processing of aluminium and steel profiles -with 1 vertical and 1 horizontal milling motor -per engine: 0.74 kW 12,000 rpm -Installation dimensions 2800/1100/H1630 mm -Transport dimensions 800/1200/H1630 mm -Weight: 270 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Manufacturer: Himmel, milling motor from Okoma table router -Type: 2 LS 80 -Power: 1.5/2.2 kW 11770/17790 rpm -Voltage: 110/165 V/200/300 Hz -Dimensions: 460/240/H150 mm -Weight: 25 kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part of a: WMW HECKERT milling machine -Number: 1 piece angle milling head -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Rezes recording: mm -Pitch circle: mm -Transport dimensions: 750/600/H530 mm -Weight: 296 kg

Universal milling head, milling adapter, milling extension, angle milling head, electronic spindle -Spare part comes: from a machining center BJM type ALBZ-145 -Number: 1 piece angle milling head -Recording output: HSK -Milling head: completely rotatable/pivotable -Transport dimensions: 1080/380/H435 mm -Weight: 246 kg

Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for: joint milling -with: heavy dovetail guide -Milling unit: swiveling -3x: Perske Motors -Engine 1: Type KCS 70.12-2 D -Power: 3/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Engine 2: Type KCS 70.12-2 D -Power: 3/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Motor 3: Type KNS 51.14-2 D -Power: 1/2 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2750/5700 rpm -Other engines with different performance levels are available from us for an additional charge. -Number: 1x joining milling unit available -Price: per piece -Dimensions: 1370/110 ...

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Gear ratio: 1:2.5 -Voltage: 220/380 volts -Receiving shaft: Ø 30 mm -Tool: Ø 180 x 12-20 mm -Dimensions: 570/340/H195 mm -Weight: 56 kg

Model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -Milling machine head: pivoting/rotating -Feed: in X and Y no feed because no motors are installed (gears are available, see pictures) -Clamping table: 280 x 1300 mm -Travel: X/Y/Z 450/300/325 mm -Spindle mount: SK40 -quill stroke -quill feed: 0.04-0.16 mm/rev -Speeds from: 60 to 3000 rpm -Dimensions: 1700/1530/H2200 mm -Weight: 1362 kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø with groove -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 8 recordings available -Price: per piece -Dimensions: 270/95/H95 mm -Weight: 3.2 kg/piece

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø with groove -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 28 recordings available -Price: per piece -Dimensions: 270/95/H95 mm -Weight: 3.2 kg/piece

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -for sawing: edges on the front and back edges of the workpiece -1x: Motor Perske -Type: KN60.09/2 -Power: 1.5 kW -Voltage: 220/380 volts -Frequency: 50 Hz -Speed: 2810 rpm -Dimensions: 900/575/H450 mm -Weight: 112 kg

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping or placing material under it -Width: 94 mm -Length: 220 mm -Height: 15 mm -Number: 4x milling support available -Price: complete -Weight: 4.7 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 165 volts -Power: 0.22 kW 17250 rpm at 300 Hz -Collet holder: Ø 8 mm -Thread: right -Number: 3x engines available -Price: per piece -Dimensions: 200/80/H90 mm -Weight: 1.8 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 165 volts -Power: Motor 0.22 kW 17250 rpm at 300 Hz -Socket: Ø 15 mm -Thread: right -Number: 5x motors available -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 1.8 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 133 volts -Power: 0.15 kW 11160 rpm at 200 Hz -Recording: Ø 15 mm -Thread on the left -Number: 6x motors available -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 1.7 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Manufacturer: Perske, milling motor type VS 31.09/2 -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Shaft mount: Ø 20 x 10 mm -Number: 3x engines available -Price: per piece -Dimensions: 250/60/H155 mm / 240/60/H140 mm -Weight: 3.4 kg/pc.

Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 67 mm -Milling height: 150 mm -Adjustment: SK50 -Manufacturer: WIDIA -4x milling cutter type: KRE80-301-10 -6x milling cutter type: KRE80-300-11 -2x milling cutter type: KRE80-301-20 -3x milling cutter type: KRE80-301-30 -Weight: 15 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -Number: 2 x motors Perske -Power: 0.15 kW -Voltage: 133 volts -Frequency: 200 Hz -Speed: 11,160 rpm -Other engines with other services in stock for an additional charge -Dimensions: 470/400/H620 mm -Weight: 55 kg

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping or placing material under it -Width: 100 mm -Length: 800/1000 mm -Height: 825 mm -Thread: M24 -with stand: 200 mm wide -Number: 4x milling support available -Price: complete -Weight: 2566 kg

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping -Width: 90 mm -Length: 700 mm -Height: 150 mm -Threaded holes: M24 -Bores diameter: 25 mm countersunk -Number: 1x milling support available -Price: per piece -Weight: 70 kg/piece

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping -Width: 700 mm -Length: 107 mm -Height: 440 mm -Threaded holes: M24 -Bores diameter: mm -Number: 2x milling support available -Price: per piece -Weight: 235 kg/piece

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping or placing material under it -Width: 100/120 mm -Length: 230/330 mm -Height: 65/78 mm -Number: 6x milling support available -Price: complete -Weight: 58 kg

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping or placing material under it -Width: 60 mm -Length: 160/200/300/400 mm -Height: 40 mm -Number: 14x milling support available -Price: complete -Weight: 58 kg

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping -Width: 140 mm -Length: 370 mm -Height: 53 mm -Threaded holes: M12 -Number: 4x milling support available -Price: per piece -Weight: 21 kg/piece

Spiral milling device, dividing head, dividing attachment, rotary table, rotary table -Admission inside: SK40 -Tip height: 65 mm -Distance between centers: 440 mm -Passage: Ø mm -Reversing coupling for: left u. Right spiral -Pivotable for conical spirals: 0 - 45 ° -Dimensions: 760/430/H310 mm -Weight: 61 kg

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -1x motor: 0.6 kW 18,000 rpm at 300 Hz -Voltage: 165 volts -Shaft holder: Ø 16 mm -Tool: Ø 70 x 20 mm -with: copy unit -with: quick change holder -Number: 3x spindle motors available -Price: per piece -Dimensions: 310/175/H250 mm -Weight: 6.5 kg

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 630/420/H700 mm -Weight: 56 kg

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 500/500/H600 mm -Weight: 54 kg

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.3 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Weight: 64 kg

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 480/350/H570 mm -Weight: 55 kg