plano milling used for sale

Control Siemens ... Sinumerik 840D Sl Table dimensions ... 1600mm Axis X ... 8000mm Axis Y ... 1300mm Axis Z ... 1800mm Spindle speed ... 20-4000 rpm ISO 50 cooling ... 30bar Rapid traverse ... 35m/min Machine weight ... 36500kg

Deckel FP4MA 2204 - CNC Tool Milling Machine - 2022 refurbished - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Power-operated tool clamps horizontally and vertically - Automatic speed manual transmission - Automatic clamping in the X, Y and Z axis - Automatic central lubrication - Coolant device - Direct displacement measurement - Anti-collision clutch in the Y and Z axes - Year of construction 1988 - Incl. tool holders, drilling/milling tools & tool trolleys Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head can be moved manually on the headdle block: 150 mm Main Drive: - Pole-switchable three-phase brake motor: manual  ...

Control Heidenhain ... TNC 426 Table dimensions ... 6020x1060mm Axis X ... 8300mm Axis Y ... 760mm Axis Z ... 1200mm SK 50 Spindle speed ... 5-2000 rpm. Max.table load... 8000kg Machine weight ... 36000kg The machine is in good condition, possible to sample under power.

MATEC 30 HV CNC machining center was built in 2001 in Germany by Matec Maschinenbau GmbH. The machine, designed for precision machining of oversized workpieces, is equipped with a number of reliable components with excellent specifications. This includes a tilting work head, a 24-position tool magazine and a chip extraction unit. All this is complemented by the intelligent BOSCH CNC control, in which advanced machining programmes are created in just a few steps. The MATEC CNC vertical machining center weighs approximately 15000 kg. Technical specifications of the MATEC 30 HV CNC milling machine - CNC controller: BOSCH TYP 3 OSA - feed in the X/Y/Z axis: 3000/600/800 mm - maximum spindle rotational speed: 9000 rpm - minimum spindle rotational speed: 20 rpm - spindle drive power: 16 kW - tilting work head - rotation angle of work head: ± 90° every 1° - 24-position tool magazi ...

Specifications: Travel X/Y/Z: 650 / 500 / 450 mm Clamping surface: 1000 x 600 mm Spindle holder: SK 40 Spindle speed: 6500 1/min Max. table load: 400 kg Number of WZ stacks slots: 20 Power: 24 kVA Machine weight, approx.: 5500 kg Equipment: - Motor spindle 12000 1/min - Tool changer 20x - Heidenhain tool pushbutton - Heidenhain workpiece pushbutton - Handwheel Heidenhain - Menzel minimum quantity lubrication - Approx. 25 tool holders

Producer TOS Tjechië Type FNK25A Table size 250 x 1300 mm Movement X=axis 800 mm Movement Y=axis 350 mm Movement Z=axis 450 mm Spindle taper SK 40 DIN 2080 movement quill 125 mm Spindle speed 56 -4500 Rev/min. Table feedrate X-Y-Z as Yes Voeding Pinole Yes Power 4 kW Dimensions L x W x H 2665 x 1980 x 226 mm Weight 1,760 Kg

KITAMURA MYCENTER HX630G CNC machining center was built in 2017 by the Japanese brand Kitamura Machinery Co., Ltd. The machine, designed for precision machining of workpieces with a maximum weight of 1500 kg, was created as a response to the needs of modern business. In order to meet all production requirements, state-of-the-art technical solutions, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. The machining process is performed fully automatically inside a large working area, which includes a capacious tool magazine and a reliable spindle with a special DCS (Dual Contact Spindle) system. This system ensures optimum spindle rigidity through simultaneous contact between the taper and the flange. Furthermore, the automatic pallet exchange system allows workpieces to be loaded and unloaded simultaneo ...

CNC Milling machine PMER type DPM Travel X: 780 mm Travel Y: 410 mm Travel Z: 550 mm Numerical Command ANILAM type 5000 M Cone: ISO 40 Spindle exit: 120 mm (manual) Spindle speed: from 70 to 3800 RPM Table size: 1270 x 320 mm Year of construction: 2004 Maxi distance spindle nose/table: 500 mm Mini distance spindle nose/table: 100 mm Swivel head right/left Jog crank Possibility to work manually (with cranks) or driven by the CN Lubricant pump Voltage: 380 V Width: 1900 mm Depth: 2100 mm Total height: 2500 mm Weight: 2,5 T

OKUMA MA-600HII CNC machining center was built in 2012 by the Japanese brand OKUMA Corporation. This highly efficient machine is used for advanced workpiece machining in 4 axes. The machining process is performed fully automatically inside a large working area by means of precision cutting tools and a reliable high-speed spindle. The automatic pallet changing system allows workpieces to be loaded and unloaded simultaneously during machining, reducing machine downtime to a minimum. The extensive equipment also includes, among others, a capacious tool magazine and an intelligent CNC controller with an intuitive interface. The MA-600HII CNC horizontal machining center weighs 24500 kg. Technical specifications of the OKUMA MA-600HII CNC milling machine - CNC controller: OSP-P300MA - number of axes: 4 (X,Y,Z,B) - feed in the X/Y/Z axis: 1000/900/1000 mm - rapid traverse in the X,Y,Z ax ...

Specifications Manufacturer: Saeilo Type: FP3-A Control: Contur M Year of Make: 2021 Travels: X 400 mm Y 300 mm Z 375 mm Clamping area: 400 x 800 mm Speed: 50 – 2,000 rpm Tool holder: SK40 Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included Coolant Setup Table cabin Electronic handwheel Hydraulic tool clamping Machine Light

Mikron WF 32 CH universal milling machine Machine with chips and splash guard cabin Equipped with a Heidenhain TNC355 controller Specifications Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Travel: X 560 mm Y 500 mm Z 400 mm Clamping area: 530 x 900 mm Rapid traverses : X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 – 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg More items - new and used - can be found in our shop! International shipping costs on request!

Table dimensions ... 900 x 500mm Axis X ... 700mm Axis Y ... 500mm Axis Z ... 500mm ISO 40 Spindle speed ... 0-3150 rpm L x W x H ... 2220x2115x2120mm Machine weight ... 2550kg The machine is in good condition, possible to test under power.

GeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.18300 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinNC swivel rotary table with pallet carrierTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 500 KgMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000  ...

Key data: 8000 mm, 1500 mm, 2500 mm

Make : CORREA/ANAYAK Type: HVM 80 Year of construction 2014 Travel X/Y/Z 8,000 x 1,500 x 2,500 mm, Spindle speed max.6000 rpm Spindle power 28 KW Ganaukeit A and B axis 0.02 degrees Cooling by the spindle High-frequency spindle, type HFS IMT Mold, max. 26,000 rpm, max. 11 Kw Table m. 8,000 x 2,500 x 300 mm, T-slots 22 H12, distance T-slots 250 mm, Table load max. 15,000 kg/m², Distance between spindle and stand max. 1,675 mm, Feeds X/Y/Z max. 30,000 mm/min, Max. power 96 kw Machine weight 55,000 kg, Stand 12,000 kg, Plate field 16,000 kg, CNC screen control, Fabr. Heidenhain, type CNC I 530, With 1 control panel next to the machine adjustable in height and 1 control panel in At the front of the machine. Auto. Tool changer, chain version, max. 60 tools, Tool holder SK50, tool weight max. 25 kg, tool L max. 400 mm, Wireless hand control panel, Fabr. Heidenhain, Ty ...

X-axis: 775 mm Y-axis: 250 mm Z-axis: 425 mm Table dimensions: 1,100 x 240 mm Spindle Holder: ISO-40 Spindle speeds: 48 - 1,500 rpm Feed X/Z axis: 12 - 280 mm/min. Digital reading: Heidenhain on Y/Z axis Equipped with: - Milling protection - Coolant device Country of origin: Spain Motor power: 3 kW Machine LxWxH: 160 x 130 x 160 cm Machine weight: 1300 kg

Key data: 14000 mm, 1500 mm, 3000 mm

Stock number 1110049 Machine Type: CNC Long Bed Milling Machine Make FPT Type Spirit 130 Year of construction 2012 Control type HEIDENHAIN TNC Itnc 530 X-off (mm) 14,000 Y-displacement (mm) 1,500 Z-off (mm) 3,000 Speeds of (rpm) max. 4,000 Tool holder Iso 50 Rapid traverse max 25,000 mm/min Tool changer for 60 tools in really top condition and the machines can be demonstrated under power Information: CNC Control One 29,766 hours Program leach 9655 hours

Key data: 3600 mm, 1250 mm, 1600 mm

Brand: Kiheung Machine No: F668 Type KNC-U1000 CNC brand Heidenhain CNC type TNC 426 Year of construction 2002 Table length 4,100 mm Table width 1,050 mm Maximum table load 8,000 kg X 3,600 mm Y 1,250 mm Z 1,600 mm Holder BT50 Fast 10,000 m/min Speed 0 - 4,000 RPM Movable table Huron Milling Head CNC controlled milling head Conveyor Machine size (LxWxH) 11,000 x 5,000 x 3,800 mm Machine weight 28000 kg Magazine slots: 30 Spindle drive motor: 29 Kw Equipped with 4th axle. Table diameter: 630 mm Ø Load: 900 kg

Key data: 6300 mm, 1800 mm, 2500 mm

Brand: Anayak Engine No: F712 Type HVM 7000-MG CNC brand Heidenhain CNC type iTNC 530 Year of manufacture 2005 Table length 3,300 mm Table width 1,200 mm Maximum table load 15,000 & 28,000 X 6,300 mm Y 1,800 mm Z 2,500 mm Holder SK 50 Speed 60 - 3,000 RPM CNC controlled milling head Index after 2.5 ° Controlled rotary table 360 ° - 2,000 x 3,000 mm Cooling by spindle Conveyor Turn on the spindle 37/51 Kw Max. workpiece weight 28,000 kg Machine weight 65,000 kg

CINCINNATI ARROW 1250 CNC vertical machining center was built in 2001 in the United Kingdom by CINCINNATI MACHINE U.K. LIMITED. The machine, distinguished by its high reliability, productivity and precision, is used for the economic machining of workpieces. The machining process is performed inside a large work space, equipped with, among others, a 21-position tool magazine and a high-speed spindle. Its high-quality design eliminates any vibrations generated during milling, guaranteeing the highest possible stability during even the most intensive challenges. The offered CINCINNATI ARROW 2 1250 CNC machining center has undergone regular maintenance and servicing. The machine is after an spindle overhaul and the replacement of guides and screws in the X and Y axes. The total weight of the machine is 6000 kg. Technical specifications of the CINCINNATI ARROW 1250 CNC milling machine - C ...

Walter Helitronic RtWN 200 NEGI-U

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 40 barProduction Package 40 bar Option includes: - Internal coolant supply 40 bar; - Tank capacity: 600l with papertype filter; - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal -Tool clamping buttons on the headstockTool Clamping and Unclamping Buttons placed on the Headstock CoverAir coolant internal (through spindle centre)Air Coola ...

GeneralVertical Machining centre; Control: Control SIEMENS ERGOline IV CharacteristicsTable surface1400 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z1100/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 220 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwhAir coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low o ...

Control: OSP-P 300S X-axis: 690 mm Y-axis with stroke: 230 mm Z-axis: 2,045 mm B-axis: up to 225°, positioning in 0.001° Turning length: 2,000 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 80-fold Equipment: - Collision avoidance system - Tool monitoring system - Tool measuring device - Tool calibration - Sub-spindle with tailstock function - Renishaw touch probe - Door automation - NC bezel support with bezel SMW SLU-Z 3.2 - ONE touch IGF - Hinged belt conveyor - Main spindle replaced in 2022

Key data: 4300 mm, 1200 mm, 1050 mm

Brand: Anayak Engine No: F607 Type HVM-5000 CNC brand Heidenhain CNC Type TNC-426 Year of manufacture 1997 Table length 5,000 mm Table width 1,000 mm X 4,300 mm Y 1,200 mm Z 1,050 mm Tool Changer 40 Probes Milling head B as gestuurd Huron Milling Head Pivot BT 50 CNC controlled milling head Index after 2.5 ° Number of axes 4 Cooling by spindle Conveyor Machine weight +- 35000 kg Movable column

Key data: 6000 mm, 2000 mm, 3000 mm

Machine Type: CNC Travelling Column Milling Machine Make ZAYER Type KCU6000 Year of construction 1992 Control type Heidenhain TNC 415 X-way (mm) 6,000 Y-off (mm) 2,000 Z-off (mm) 3,000 Speeds from (rpm) 20 - 1,800 Tool holder BT50 Feed longitudinal (mm/rev) 5 - 5000 mm/min Feed Transverse (mm/U) 5- 5000 mm/min. Vertical feed rate (mm/rev) 5- 5000 mm/min. Rapid traverse 10,000 mm/min. Total power(KW) 34 Length (mm) 11,000 Width (mm) 2,500 Height (mm) 7,000 Weight 31.000 kg Information 'Juaristi MG6' rotary table: 1500 x 1200 mm With coolant pump Cooling system: 2.5 bar Tool cooling: 15 bar

Make: Tos Machine No: F641 Type SPEEDtec CNC brand Siemens CNC type Sinumerik 840D Year of construction 2009 X 1,250 mm Y 1,000 mm Z 600 mm Mounting HSK 100 Motor power 25 kW Speed 12000 RPM Tool Changer Number of pallets 4 Outgoing Aries Including manuals Maximum speed 12,000 RPM Maximum pallet load 4,000 kg Chip transport Magazine slots: 2x 40 , HSK 100 4 tables, 1x 1,000 x 1,250mm / 3x 1,000 x 1,000mm

Key data: 700 mm, 250 mm, 400 mm

Universal Milling DUFOUR 223 Travel X: 700 mm Travel Y: 250 mm Travel Z: 400 mm Cone SA40 Spindle speed: from 24 to 1500 RPM Table size: 1150 x 325 mm Horizontal + Vertical Swivel Head Scale: 3 axes ELESTA Auto Feeds X - Y - Z Lubricant pump Voltage: 380 V Width: 1800 mm Depth: 2300 mm Total height: 2100 mm Weight: approx 2 T

Ho Chun U-1000B - Universal Bed Milling Machine - 3-axis position indicator - Universal milling head - Hardened and ground guideways - Infinitely variable feeds - Stepless speeds with 2 levels - Horizontal milling device - Hydraulic tool feed - Drive 11 kW - Automatic central lubrication - Coolant device - Table covering - CE certification - Incl. operating instructions and documents - Year of construction 2001 - Complete service carried out Specifications Workbench: - Table clamping surface: 1500 x 360 mm - Table load: 800 kg Travel: - X-axis longitudinal: 1000 mm - Y-axis transverse: 540 mm - Z-axis vertical: 430 mm Workspace: - Distance spindle nose / table: 50 - 480 mm - Distance between spindle center / stand: 350 mm Feeds: - Number of feeds: infinitely variable - Feed longitudinal / transverse: 16 - 1200 mm/min - Feed rate: 8 - 450 mm/min - Rapi ...

Key data: 5000 mm, 3100 mm, 1200 mm

Machine Type: CNC Gantry Milling Machine Make CORREA Type Rapid 50 Year of manufacture 2004 Heidenhain control type Table dimensions (mm) 5000 x 2000 mm X-way (mm) 5000 mm Y-way (mm) 3100 mm Z-way (mm) 1200 mm Table load max. 15 ton Speeds of (rpm) max. 18,000 Tool holder HSK 63 Total power(KW) 20/27 Length (mm) 15000 Width (mm) 6200 Height (mm) 6000 Weight 65 ton

Producent INTOS Zebrak Tjechië Type FNGJ 20 Chalkboard afmeting breedte x lengte 400 x 256 mm Longitudinal Plaatsing X=as 450 mm Dwarsverplaatsing Y=as 300 mm Verticaleverplaatsing Z=as 350 mm Spindle opname SK 40 DIN 2080 Spindle toerental 50 -2500 rpm. Aantal toerentallen 18 Sheet voeding X-Y as 8-400 mm/min. Sheet voeding Z as 4-200 mm/min. Rapid traverse X-Y as 2400 mm/min. Rapid traverse Z as 1200 mm/min. Electrified capacity 2.2 kW Afmetingen L x W x H 1735 x 1475 x 1660 mm Weight 1660 kg Standaard toebehoren Koelmiddel inrichting Heidenhain uitlezing met taster

Table milling machine BÃERLE SFM -used-planed grey cast iron table, finely adjustable milling fence, clockwise/counterclockwise rotation---------- Technical data ----------Table size: 1100 x920 mm, work table height: 830 mm, spindle diameter: 30 mm, speeds: 2,800,4,500,5,600,6,000,9,000,12,000 rpm.

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: DMG MORI total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Weld edge former INDUMASCH SIEGEN Type V 12Masch. No.: 50674 Year of construction 1992Material thickness max. 40 mmChamfer angle 45Working speed approx. 3 m/min. Motor power 2 kWNetz connection 400 Volt, 50 Hz- Flow / return- Built-in guide roller for chamfer angle 45- Belt guard missingDimensions L x W x H 650 x 600 x 650 mmWeight 75 kggood condition; used

A Rackermann double-spindle milling machine (horizontal and vertical) is available. Travel X/Y/Z: 1000mm/370mm/450mm, table dimensions X/Y: 1300mm/400mm. Horizontal: Tool holder: SK40, max. tool diameter: 250mm, milling spindle swivel range: +/-90°, quill adjustment: 120mm, spindle diameter: 60mm, speed: 2100rpm. Vertical: Tool holder: SK40, max. tool diameter: 280mm, spindle diameter: 90mm, speed: 1400rpm. Feed X/Y/Z: 4m/min, feed force X/Y/Z: 10kN/10kN/30kN, rapid traverse X/Y/Z: 5m/min. Machine dimensions X/Y/Z: approx. 5500mm/4100mm/2500mm, weight: approx. 5400kg. Documentation available. On-site inspection is possible.

Univ. bracket milling machine REMA type X 6230Fabr. No. 98307 Year of construction 1998Travel distances X: 700 mm, Y: 250 mm, Z: 380 mmTable size 1100 x 300 mmSpindle holder ISO 40Distance spindle nose - table max. 470 mmQuill movement 55 mmSpindle speed vertical 45-2000 rpm. 12 stepsSpindle speed horizontal 32-1600 rpm. 18 stepsFeed speed X and Y- axis 15 - 1200 mm/min. 18 stepsFeed speed Z-axis 5 - 400 mm/min. 18 stepsRapid traverse X and Y-axis 2500 mm/min. Rapid traverse Z-axis 800

Turning diameter: 200mm, turning length: 400mm, turning diameter: 420mm, bar diameter: 60mm, max. spindle chuck diameter: 160mm, speed: 5000rpm, turret: 2, positions: 2x14, rapid traverse X/Z: 20m/min/30m/min. Machine dimensions X/Y/Z: approx. 7500mm/2100mm/2100mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible.

A versatile and robust Arsenal double-spindle universal milling machine with milling head is available. Table dimensions X/Y: 1350mm/320mm, table tilt: +/-45°, travel X/Y/Z: 1000mm/360mm/460mm, automatic travel X/Y/Z: 980mm/340mm/440mm. Horizontal spindle table distance: 30mm-490mm, vertical spindle table distance: 170mm-630mm, spindle mount: ISO50, speed: 2000rpm, feed X/Y/Z: 1000mm/min/415mm/min/415mm/min, rapid traverse X/Y/Z: 2500mm/min/1040mm/min/1040mm/min. Machine dimensions X/Y/Z: approx. 2800mm/3100mm/2000mm, weight: approx. 3500kg. On-site inspection is possible.

Turning diameter: 420mm, turning length: 820mm, spindle bore: 105mm, speed: 3000rpm, spindle power: 22kW, travel X/Z: 280mm/820mm, tool positions: 10, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 4400mm/2100mm/2300mm, weight: approx. 6000kg, control: Mitsubishi M-720BM (MAPPS 2), operating hours: 10000h. Including various accessories. The driven tools have never been used, only the Y-axis has run. Measuring arm and ball screw of the Y-axis are as good as new. Documentation available. On-site inspection is possible.

With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300/ -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, turning lengths: 1500/2000/2500/3200/4000/4500/6500mm, swing diameter: 780/ 880mm, turning spindle bore: 92/123mm, main spindle speed range: 0-3000/0-3000/2000/min, max. Turning/milling unit speed: 5000/6000/10000/min, max. tool length: 900/600/1000/300/900mm, quill stroke: 160/170mm, connected load: 102kVA, control system: SINUMERIK ONE / SINUMERIK 840D sl, drive system control: SINAMICS S120, weight: 17t. On-site inspection is possible.

Travel X/Y/Z: 2000mm/750mm/800mm, NC rotary table diameter: 950mm, milling head: SK50, milling head tilt: +/-90°, tool positions: 48, max. workpiece weight: 2500kg. Dimensions X/Y/Z: approx. 4000mm/3100mm/3200mm, weight: approx. 16000kg, control: Heidenhain 640. Including measuring probe M & H, 40bar IKZ, work area extraction Reven, paper belt filter Resy, brine conveyor, chip cleaning gun, wedge chuck Schink, diameter: 630mm, with various clamping jaws and other various turning and milling tools. Documentation available. On-site inspection is possible.

X-travel: 600mm, y-travel: 500mm, z-travel: 540mm, max. distance-table: 690mm, feed: 40m/min, table dimensions: 700x500mm, max. workpiece weight: 800kg, controls: Heidenhain TNC 620, connected load: 18kVA, length: 2240mm, width: 3338mm, height: 2803mm, weight: 5.6t, with documentation, has not run much.

A Huron CNC bed milling machine is available. Travel X/Y/Z: 2400mm/1000mm/1000mm, control: Heidenhain TNC 415. An on-site inspection is possible.

Travel X/Y/Z: 406mm/305mm/254mm, table dimensions X/Y: 914mm/305mm, max. table load: 227kg. Spindle speed: 6000rpm, tool holder: BT40, tool positions: 10, rapid traverse X/Y/Z: 15.2m/min. Machine dimensions X/Y/Z: approx. 2350mm/2300mm/2700mm, weight: approx. 1550kg. Including an additional control panel on request (not included in the price). Documentation available. On-site inspection is possible.

Travel X/Y/Z: 850mm/280mm/355mm, table dimensions X/Y: 1250mm/315mm, feed X/Y: 800mm/min, feed Z: 250mm/min, spindle mount: ISO 50, spindle speed: 1400rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, weight: approx. 3300kg. On-site inspection is possible.

Travel X/Y/Z: 820mm/300mm/485mm, table dimensions X/Y: 250mm/1000mm, spindle mount: SK40, speed: 2800rpm, spindle head swivel: +/-45°, quill stroke: 100mm, feed: 630mm/min, connected load: 9.5kW, machine weight: approx. 1600kg. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 560mm/320mm/400mm, speed: 3600rpm, tool holder: SK40, power: 3kW, table dimensions X/Y: 450mm/950mm, weight: approx. 1650kg. Including various accessories. On-site inspection is possible.

A Rotox lock and copy milling machine including a small manual Dalex spot welding machine is available. Profile width: 125mm, profile height: 50mm, milling dimensions X/Y: 265mm/125mm, vertical/horizontal spindle speed: 12000rpm/9000rpm, machine dimensions X/Y/Z: 750mm/700mm/1700mm, weight: approx. 200kg. On-site inspection is possible.

Various metalworking machines are available. 1) Johannsen T8E belt grinder, year of manufacture: 1979, table dimensions X/Y: 1900mm/800mm, machine dimensions X/Y/Z: approx. 3200mm/1000mm/1250mm, weight: approx. 530kg. 2) Milling machine BFM 30, year of construction: 1981, machine dimensions X/Y/Z: approx. 1100mm/1200mm/1650mm, weight: approx. 360kg. 3) Böhme router, machine dimensions X/Y/Z: approx. 800mm/900mm/1550mm, weight: approx. 320kg. 4) Fleckstein router, machine dimensions X/Y/Z: approx. 1200mm/1200mm/1250mm, weight: approx. 450kg. 5) Fleckstein horizontal milling machine, machine dimensions X/Y/Z: approx. 1200mm/1200mm/1250mm, weight: approx. 450kg. On-site inspection is possible.

Travel X/Y/Z: 400mm/300mm/400mm, speed: 2000rpm, spindle mount: SK40, feed: 380mm/min, rapid traverse X/Y/Z: 1200mm/min, table dimensions X/Y: 320mm/750mm, quill stroke: 80mm, milling head tilt: +/-90°. Machine dimensions X/Y/Z: approx. 1800mm/1200mm/1200mm, weight: approx. 1300kg. On-site inspection is possible.