plano milling used for sale

tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder -Milling holder: cutter head holder SK50 -Mounting: Ø 22 mm / M10 -Dimensions: see photos -Dimensions: Ø 98 x 554 mm -Weight: 19.3 kg

revolutions per minute: 8000 U/min x-travel: 1000 mm y-travel: 500 mm z-travel: 570 mm Control: Siemens weight of the machine ca.: 5000 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: 3914 PROCESSING Manufacturer: FEELER, Type: FV 800A Machines NO.: VG806, Year of manufacture: 1999 Specifications: Table size 950x425 mm Large table load 500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 450 mm Vertical movement (Z) 505 mm Spindle Taper 40 ISO Spindle speeds 6000 rpm Total power 5.5 kW Tool changer 24 places Rapid traverse X/Y/Z 18/18/15 m/min Control Mitsubishi Meldas 500 Fabr. Controlled in axes 3 Accessories: Cooling water system. Machinery vise. Tool holders pcs Operating instructions Length: 3060mm, Height: 2735mm, Width: 2300mm, Weight: 4100Kg

Tool Milling Machine Cover FP3 2201 Travel XYZ: 500-300-380mm Spindle holder : ISO 40 S20x2 Spindle speeds: 40 to 2000 Universal table (or angle table) With active digital display on 3 axes Heidenhain TNC 113 Drill quill hor and vert Stepless feed and rapid traverse on all 3 axes Motor 3 Kw Built in 1979 220 Volt 3ph (with transformer 400-220V if necessary) The machine has been technically tested

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 48 mm / Height 70 mm -Dovetail: 90 to 74 mm 15 mm high -Dimensions: see technical drawing in the photos -Dimensions: 133/60/H135 mm -Weight: 4.2 kg

spindle moulder, spindle moulder -Manufacturer: Metabo, swivel table milling machine type Tf 1690 D with support table -Drive: 2.0 kW -Milling spindle: Ø 30 mm -Speeds: 3,000 / 6,250 / 9,000 rpm -Cutter: Ø max. 200 mm -Table length: 3600 x 500 mm -Dimensions: 3600/910/H1610 mm -Total weight: 170 kg

spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg

SPECIFICATIONS: Max. machining length mm: 2500 Max. machining width mm: 350 01 - 02 Milling/grinding units per week 7.5 03 - 04 Milling/grinding units per week 4.0 08 Workpiece clamping presses Fast workpiece return

Offer 24303 Specifications: - Table size approx. 630 x 340 mm - Working range of the axes - X (longitudinal) approx. 400 mm - Y ( transverse ) approx. 220 mm - Z (vertical) approx. 400 mm - Max. distance between milling spindle and table surface 400 mm - Tool holder SK 40 - Working spindle speeds adjustable in 16 steps 45 - 2240 rpm - Mot table feeders X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm - Weight approx. 1600 kg - with: - 3 axis digital display HEIDENHAIN - Vertical milling head can be swivelled - Horizontal spindle counter holder - Machine vise

Universal CNC Milling Machine MAHO MH 600 E2 Travel X: 600 mm Travel Y: 400 mm Travel Z: 450 mm Numerical Command CNC PHILIPS 432 Cone SA40 Spindle speed: from 20 to 4000 RPM Table size: 900 x 480 mm TravelSpindle sleeve travel: 80 mm Year of construction: 1989 1 lubricant tank Voltage: 380 V Width: 2500 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3,5 T (We have a second machine for spare parts)

Tool holder, milling holder, milling tool, long milling arbor, attachment holder -Milling holder: SK40 holder -Cutter holder. Ø 10 mm -Number: 2x recording available -Price: per piece -Dimensions: Ø 64 x 170 mm -Weight: 1.3 kg/piece

Tool holder, milling holder, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling holders: MK5 holder 3 pieces -Type: Shaft Ø 16x25 / 22x30 / 27x50 mm -Shipping/Price: complete -Transport dimensions: 225/140/50 mm -Weight: 4.8 kg/total

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling holders: SK30 3 pieces -Type: various versions, see photos -Price/Delivery: complete -Transport dimensions: 150/65/H145 mm -Total weight: 1.8 kg

Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Cone: SA40 Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T

Shell end mills, cylindrical milling cutters, milling cutters, side milling cutters, slot milling cutters -Manufacturer: Fette, shell end mills, disc mills -Type: A63x10W SP345 HSS -Hole: Ø 22 mm -Quantity: 1x milling cutter available -Dimensions: Ø 63 x 10 mm -Weight: 0.1 kg

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling holders: adapter intermediate sleeve reducing sleeve SK40 MK5 -Mounting: SK40 -Holder tool: MK5 -Dimensions: Ø 63 x 405 mm -Weight: 5.6 kg

Tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder -Milling holder: Type SK50 7 pieces -Intake: Ø 50/40/32/22 mm see photos -Transport dimensions: 390/220/H250 mm -Total weight: 27.2 kg

Dear Ladies and Gentlemen, the machine has not run much, it has been treated with care and is fully functional.

Hello Ms. Bader, for sale is a used, fully functional milling machine of the brand - Schaublin 53 incl. accessories.

MIKRON Cutter Mod. VCP 1000 Machinable dimensions: square = 125x125 round 152 Machine visible in operation, in excellent condition.

Tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder -Milling holder: Type SK50 -Intake: Ø 32 mm see photos -Dimensions: 250/90/H95 mm -Weight: 3.5 kg

For sale good working CNC milling machine Deckel FP4 AT with two vices and several tools.

for sale NEW - ALDURO Drilling-Milling Machine BFM 20V2 Drilling capacity up to 20 mm Spindle Holder MK 2 Head swivels +/- 90° Stepless speed adjustment 50 - 2250 rpm Cross table 500 x 180 mm Digital X-travel 195 mm Y-travel 140 mm Motor 1.1 kW, 230 V Machine without base (base), Can be purchased separately Weight approx. 113 kg further models and inquiries to FSA Maschinen AG

Tool holder, milling holder, milling tool, test mandrel -Test mandrel: Ø 50 mm -Recording: SK50 -Shaft: R=25,000 / L=120,068 mm -Dimensions total: Ø 98 x 255 mm -Weight: 4.4 kg

Tool holder, milling holder, milling tool, test mandrel -Test mandrel: Ø 39.99 mm -Mounting: SK40 -Shaft: R=19.995 / L=219.014 mm -Dimensions total: Ø 65 x 314 mm -Weight: 2.8 kg

x-travel: 560 mm y-travel: 500 mm z-travel: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,22,22,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine DECKEL FP5NC -axis: X-710 Y-600 Z-500

FEELER VMP 32 CNC vertical machining center was built in 2012 in Taiwan. This versatile machine with extensive machining capabilities is specially designed for precision machining of heavy workpieces weighing up to 800 kg. To achieve excellent precision and accuracy in machining process, reliable components in the form of the spindle and cutting tools taken from the 22-position tool magazine are utilised. In addition, movement of the X,Y,Z axes is performed on ground rolling guideways, resulting in excellent dynamics and feed repeatability. All machining parameters are programmed in an intuitive CNC control from the renowned company FANUC. The FEELER milling center weighs 5800 kg. Technical data of the FEELER VMP 32 CNC milling machine - CNC controller: FANUC Series 0i-MD - feed in the X/Y/Z axis: 820/520/505 mm - rapid traverse in the X/Y/Z axis: 40/40/30 m/min - work table surfa ...

Tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder -Milling holder: Type SK50 -Shaft: Ø 60 mm -Mounting: Square 24x24 mm / Shaft Ø 16 x 35 mm see photos -Dimensions: 365/96/86 mm -Weight: 6.5 kg

Deckel Maho Universal Milling Machine DMU 125 P 1,250 x 880 x 800 mm Motor spindle 18,000 1/min. Tool holder SK 40 Automatic Swivel Milling Head Horizontal tool changer setup Double gripper 30 magazine slots Coolant tank 600 litres Internal cooling IKZ Form AD Conveyor Rotating viewing panel 3D path control TNC 430 NC rotary table diameter 1,250 x 1,000 mm Universal milling head with controlled B-axis Electronic handwheel Probe Infrared Heidenhain TS 631

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Dovetail: 190 to 165 mm -Bore: Ø 56 mm -Number: 2x counter bearings available -Price: per piece -Dimensions: 265/77/H122 mm -Weight: 6.1 kg/piece

CARVING machine type ANDREONI STANDARD 12 second hand machine working conditions : good Technical details : - rotary device for the simultaneous rotation of the model and the pieces (3D) - manual chuck of mandrins unit - also to work with flat pieces n.12 spindles distance betwen spindles mm. 300 rotation speed by HF converter rpm 6.000 / 12.000 max. working length ( on rotation ) mm. 1900 net weigth kgs. 2500 volt. 380/50 With tools : Yes ( as in photo attach )

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 48 mm / height 150 mm -Dovetail: 140 to 115 mm 22 mm high -Dimensions: see technical drawing in the photos -Dimensions: 215/80/H210 mm -Weight: 6.8 kg

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 40 mm / height 108 mm -Dovetail: 79 to 59 mm 15 mm high -Dimensions: see technical drawing in the photos -Dimensions: 140/73/H155 mm -Weight: 3.6 kg

Key data: 10000 , 3950 , 2500

Used for machining large parts as well as many small workpieces. machine was modernized in 2021 Type of CNC FANUC control rack X axis 10000 mm Y axis 3950 mm Z axis 2500 mm Table length 8000 mm Table width 2800 mm Max load on table 60000 kg Max. spindle speed 2000 rpm ------------------- Length x width x height 171000.0 × 93300.0 × 67600.0 Weight 150000 kg The machine, equipped with a stable work table and indestructible components, allows tasks such as milling, drilling and tapping to be performed with the highest precision, guaranteeing maximum process optimization in a wide range of industries.

Tool holder, milling holder, milling tool, long milling arbor, mounting bracket -Milling chuck: SK50 chuck -Type: 50 x 50 x 630 mm -Shaft: Ø 27 mm / Sleeves Ø 40/85 mm see photos -Dimensions: Ø 100 x 835 mm -Weight: 23.5 kg

Unused stock machine from the demonstration room BJ 2021 - V 700 CNC machining center Siemens 828D Unused stock machine from the demonstration room BJ 2021 - MCV CNC Machining Center Siemens 828D Please see the photos for the details

The data of the machine can be found in the attached files. The machine is still energized and can be examined. The machine is available now.

Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2840 rpm at 50 Hz -Shaft mounting: Ø 15 mm -Weight: 12 kg

Heynumill 2700-PF from the manufacturer Heyligenstaedt. The machine is also energized and can be viewed at any time. Please refer to the photos for the data If you have any questions or need more information, please feel free to contact me.

Dear Ladies and Gentlemen, we sell our machine Deckel FP4 NC and associated div. milling cutter chucks. Please see the photos for details. The machine is energized and can be viewed at any time.

Radius/flush milling machine, edge milling machine, edge router, shaped parts milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inside and outside radii. -Built-in milling cutters: 30° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg

Offer 24309 Specifications: - Table size 710 x 315 mm - Working range of the axes - X (longitudinal) mech./ hand 400 / 420 mm - Z (vertical) 350 / 370 mm - Y 220 / 228 mm - Distance between milling spindle and table surface 50 - 465 mm - Tool holder ISO 40 - Spindle speeds regulated horizontally in 16 steps. 56 - 1800 rpm - Spindle speeds regulated vertically in 16 steps. 56 - 1800 rpm - 16 feed speeds 11 - 355 mm/min - FAGOR digital display - Drive 400 V / 2.2 kW - Space requirement approx. W 1600 x H 1900 x D 1600 mm - Weight approx. 1300 kg

x-travel: 1000 mm y-travel: 380 mm z-travel: 430 mm total power requirement: 5,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2 x 2 x 2 m No. 4471 Universal milling machine IBERIMEX U 1000 Working area: 1000 x 540 x 430 Drive: 5.5 kW Control: Visulesta 4 digital display Table clamping surface 1500 x 360 mm documentation Spindle holder ISO 50 Speed range 40 - 1750 min-1 Space requirement approx. 2 (3) x 2 x 2 m Weight approx. 3 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mikron Universal Milling Machine Type 21D Heidenhain Control TNC 355 Tool holder ISO 40 21 spindle speeds from 40 - 4000 rpm Clamping table 350 x 700 mm Displacement distances: X=450 mm / Y=400 mm / Z=400 mm 400 V Control voltage 24 V Total weight approx. 2410 kg

Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz -with indexable insert milling cutter -Number: 3x motors available Price: per piece -Weight: 6 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 2740 rpm at 50 Hz -Shaft mounting: Ø 20 mm/M16 mm -Motor: mounted on guides -Travel distance: 160 mm -Weight: 30 kg

YCM FP100A CNC machining center was built in 2014 in Taiwan. Equipped with state-of-the-art technology and components from renowned brands, the machine is used for precision 3D machining of heavy workpieces weighing up to 1000 kg. During machining, the reliable spindle built in IDD (Isolated Direct Drive) technology moves on roller guides from Japanese company IKO, which minimises the effects of bending torque and also ensures high positioning accuracy. In addition, the use of precision ceramic bearings guarantees quiet operation and long life of the spindle. The FP100 A milling center is offered with a comprehensive range of equipment, including a 30-position magazine with automatic tool changing and an intuitive CNC control by HEIDENHAIN. The controller’s excellent optimisation and multitude of functions significantly simplify operation and enable advanced machining programmes to  ...