planer milling machine used for sale

Bridgeport Interact 1 CNC Milling Machine Type: CNC milling machine Manufacturer: Bridgeport Model: Interact 1 X-axis travel: 457 mm Y-axis travel: 305 mm Z-axis travel: 365 mm T-slot table size: 410 x 1065 mm Speed range: up to 4000 rpm Machine weight: 1600 kg Dimensions (L x W x H): approx 1700 x 1300 x 2300 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-19

Hydraulic-mechanical 4 wheel cold milling machine for asphalt and concrete, milling drum between the rear wheels, milling width can be reduced by dismantling half shells of 250 mm each, hydromechanical drive, hydraulic steering (front axle as steering axle, front axle as steering axle, front axle as steering axle, hydraulic steering machine) Auction-ID: 04B-721-3

Deckel FP3LB Universal Milling Machine Type: Universal milling machine Manufacturer: Deckel Model: FP3LB Serial number: 0554 X-axis travel: 500 mm Y-axis travel: 300 mm Z-axis travel: 400 mm T-slot table size: 300 x 1000 mm Taper: SK40 Speed range: up to 2000 rpm Engine power: 4 kW Machine weight: approx. 1100 kg Dimensions (L x W x H): 2000 x 1200 x 1800 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-18

Knuth UFM 10V Universal Milling Machine Type: Universal milling machine Manufacturer: Knuth Model: UFM 10V X-axis travel: 1300 mm Y-axis travel: 290 mm Z-axis travel: 450 mm T-slot table size: 320 x 1600 mm Workpiece weight max.: 450 kg Dimensions (L x W x H): approx. 1800 x 1500 x 2200 mm T-slots, width: 18 mm T-slots, spacing: 80 mm Upper slide travel: 550 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-14

A CNC universal tool milling machine Emco is available. Travel X/Y/Z: 450mm/300mm/350mm, table dimensions X/Y: 800mm/400mm, speed: 2500rpm, tool holder: SK40, quill stroke: 100mm, milling head swivel: +/-90°, feed: 400mm/min, rapid traverse: 4m/min, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1700mm, weight: approx. 1500kg. An on-site inspection is possible.

BACCI MOA model oscillating mortiser, with 1 table and 1 bit. Not CE compliant, for export

BACCI MOA model oscillating mortiser, with 1 table and 1 bit. Not CE compliant, for export

Deckel FP33 Universal Milling Machine Type: Universal milling machine Manufacturer: Deckel Model: FP33 T-slot table size: 430 x 1000 mm Approx. dimensions (L x W x H): 2150 x 1800 x 2200 mm 5 horizontal T-slots 2 vertical T-slots Tension clamp: 90 x 90 mm x 4 T-slot width: 20 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-25

Collection by Appointment Only. This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45162-4

Auction-ID: A1-45188-83

Deckel FP2 Milling Machine Component Type: Milling machine component Manufacturer: Deckel Model: FP2 Length: approx. 100 cm Height: approx. 31 cm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-59

Auction-ID: A1-45188-24

Accurate and adjustable sharpening system; fine adjustment of cutting angles; adjustable worktable Auction-ID: A1-45225-35

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 monoBlock With track control Heidenhain iTNC 530 Year of Make: 2005 Travels: X 980 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1250 mm x 700 mm clamping surface 3 D Probe Heidenhain Tool measurement in the BLUM Laser workspace Vertical tool changer with 32 magazine positions (HSK 63) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Chip conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions

Complete working milling/drilling machine with digital readout and variable speed. Equipped with cooling installation, machine clamp and tools. Machine is functional and very little used, purchased March 2022 (invoice available) - including rolling work table with material in the photo - Drilling capacity steel 50 mm, Milling capacity steel 25 mm, Mantle milling capacity 100 mm, Horizontal motor 1.5 KW, Vertical motor 2.2 KW, Speed range horizontal milling spindle 60 ~ 1350 rpm, Speed range vertical milling spindle: variable 100 ~ 2000 rpm, Spindle holder ISO 40, Table 1000 x 240 mm- INCLUDING: 3-axis digital readout SINO Automatic longitudinal and transverse feed work table LED lighting Cooling system Deluxe control box Tilting milling head left/right 0 - 45 degrees Swivel worktable DELTA frequency switch - immediately deployable! Auction-ID: A3-43511-10782

CONTROLS   CNC controls NUM 1060 M WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 2   X-axis travel: 3000 mm   Y-axis travel: 2010 mm   Z-axis travel: 2000 mm   rotating range A-axis from: 92.5 °   rotating range C-axis up to: 360 ° TABLE   table surface (left-right): 1450 mm   table surface (front-back): 1600 mm FLOOR PLATE   total weight approx.: 12000 kg SPINDLE / HEAD   spindle revolutions (max): 3000 /min   tool fixture: ISO SK 50   drive power: 37 kW AXIS DRIVES   traverse velocity X (max): 25000 mm/min   traverse velocity Y (max): 25000 mm/min   traverse velocity Z (max): 25000 mm/min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENT ...

X-axis: 425mm, Y-axis: 400mm, Z-axis: 240mm, Spindle speed: 42000rpm, Probe: Renishaw, Number of tools: 40, Spindle interface: HSK40, with paper filter. An on-site inspection is possible.

X-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24000rpm, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle taper: HSK 40, total connected load: 85kVA, weight: 33t, with paper filter. an on-site inspection is possible.

One-hand milling machine MAKITA 3708 FC built in 2013, 500 W

Flat dowel cutter / groove cutter BOSCH GUF 4-22 A, 620 W

A deposit of €250.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Max tool diameter 100 mm Max tool length 300 mm Max tool weight 10 kg Cutting speed 5000 mm/min Fast feed speed 15000 mm/min Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-5

MAHO MH 500 E2 CNC universal milling machine with dialog control Manufacturer: MAHO AG, Pfronten (Germany) Model: MH 500 E2 Serial Number: 53855 Control: Philips / Heidenhain Dialog (older version) Design: Vertical milling machine with cross table Cladding: Machine enclosure with front door, plexiglass Table size: approx. 700 x 400 mm (estimated) Travels: X/Y/Z estimated approx. 500 x 350 x 400 mm Spindle holder: ISO/SK40 (common for this type) Connection: 3 x 400 V, coolant connection available Condition: • Used, functionally complete • Screen, emergency stop, controls available • Control not tested • Spindle & table mechanically complete Auction-ID: 038-WFW-5

A deposit of €180.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-4

A deposit of €450.00 is required in order to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Max tool diameter 100 mm Max tool length 300 mm Max tool weight 10 kg Cutting speed 5000 mm/min Fast feed speed 15000 mm/min Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-6

Working area 1Longitudinal700 mmCross420 mmVertical380 mmGeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWClamping System ISO 7388-3 - JD30Spindle taper BT 30Speed range 20 - 10000 rpmTorque (40% DC) 48 NmTorque (100% DC) 41 NmIntegrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Inclusive Software package Sinumerik Mdynamics 5-axRotary joint, 4 channelsRotary joint for integrated swivel rotary table with torque drives 4- channe ...

Inv. Num. : 9073 Type: FP 4 MA Producer: DECKEL Created: 1998, GO 2003 Parameters: Control system: HEIDENHAIN Work table length: 800 mm Work table width: 465 mm Maximum vertical spindle speed: 4000 1/min X-axis travel: 465 mm Y-axis travel: 370 mm Z-axis travel: 380 mm Machine height: 1734 mm Machine length: 2000 mm Machine width: 1600 mm Machine weight: 1720 kg

Dovetail milling machine / grooving cutter HOFFMANN MU 2, S/N 11971

Edge milling machine on trolleys see pictures Condition: unchecked (6) Auction-ID: A7-45761-816

DMG MORI DMU 50 – 5-axis CNC machining center Manufacturer: DMG MORI / Deckel Maho Type: DMU 50, year of construction approx. 2013 5-axis machining center (simultaneous)CNC control: Siemens Sinumerik (ERGOline Panel) Travel: approx. X 500 mm / Y 450 mm / Z 400 mm Spindle: up to approx. 10,000 rpm, tool holder SK40 Tool magazine: approx. 30 places (chain magazine) incl. approx. 25 tool holders (used) Spindle condition good, machine accuracy good Operating hours: approx. 28,000 h Machine functional, currently energized Coolant system available Chip conveyor available Complete machining center incl. peripherals Ideal for 5-axis machining in tool and mould making as well as general machining Auction-ID: 04K-92D-1

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross420 mmVertical380 mmMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmTorque (40% DC) 48 NmSpeed range 20 - 15000 rpmSpindle taper BT 30Clamping System ISO 7388-3 - JD30ToolchangertoolchangerNumber of tools 15Type of magazine DiskIntegrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software packageRotary joint, 6 channelsRotary lead thr ...

5-axis gantry milling machine Fooke Endura 905 linear Year of manufacture 2007 Control Siemens 840D CNC Table size: 5,000 x 3,000 mm 2-axis NC swivel milling head: A-axis +95°/-120° (0.001°) degrees C-axis +/- 275° (0.001°) degrees Distance between uprights: 4,700 mm Distance spindle - table: 1,419 mm Travels: X 5,000 mm Y 3,000 mm Z 1,500 mm Linear motors for fast feeds : X/Y/Z 65,000 mm/min. Rapid traverses: X/Y/Z 65,000 mm/min. Spindle drive power: 28 kW Spindle speeds: max. 18,000 rpm Spindle torque: max. 89 Nm Tool holder: HSK-A63 Tool positions: 20-fold autom. Tool Changer Machine weight: approx. 95,000 kg Space requirements: L x W x H 8,850 x 9,370 x 6,200 mm Accessories: Full fairing 3 x chip conveyor CNC control on swivel arm Protective covers for drives and s ...

For sale is a high-quality universal tool milling machine from the renowned Swiss manufacturer Mikron, model WF 2 SA. The machine impresses with its high precision, stable construction and versatile applications and is in a well-maintained and functional condition. Ideally suited for toolmaking, single part production, repair work and training companies. General information: Machine Type: Universal Tool Milling Machine Manufacturer: Mikron Model No.: WF 2 SA Year of construction: approx. 1985 Condition: Used, well maintained, fully functional Availability: Immediately available Technical data: Travel (X/Y/Z): approx. 420 / 250 / 340 mm Table size: approx. 635–700 × 250 mm Spindle speed: 50 – 2,240 rpm Tool holder: SK40 (ISO 40) Feed: infinitely variable Rapid traverse: approx. 1,400 mm/min Motor power: approx. 3.5 kW Machine data: Weight: approx. 1,0 ...

A Graule notching machine and a Rotox copy milling machine are available. 1) Graule AS 450 notching machine, year of manufacture: 1994, saw blade diameter: 350mm/450mm, bore: 40mm, speed: 2800rpm, max. notching dimensions X/Y/Z: 250mm/110mm/153mm, weight: approx. 400kg. 2) Rotox KF 347 copy and lock milling machine, year of manufacture: approx. 1992, speed: 12000rpm, machining dimensions X/Y/Z: 315mm/130mm/200mm, max. workpiece cross section X/Y: 200mm/100mm, machine dimensions X/Y/Z: approx. 1300mm/850mm/1650mm, weight: approx. 350kg. An on-site inspection is possible.

Speed: 355-1800/min, nominal voltage: 380V, 50Hz, 3 AC, control voltage: 220/24V, protection class: IP54, nominal current: 100A, control: Heidenhain TNC 355, weight: 2.95t, with handwheel, coolant system, hose nozzle, hydraulic/lubrication unit, pressure accumulator/ hydraulic accumulator, solenoid valves, Bosch components and ORSTA directional control valve. An on-site inspection is possible.

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

Excellent condition - Fully operational - Loading / Transport possible! Minimum diameter : 5 mm Maximum diameter : 80 mm Minimum length : 350 mm Maximum lenght : unlimited Productivity : 1/13 mt./min Tool rotation motor : 5,5 Kw Gear motor : 0,75 Kw Motors voltage : 400V/50 Hz

AVIA FNE 40P – Universal milling machine built in 2014 Highlights • Year of construction 2014 • Model AVIA FNE 40P • 3-axis digital display ARBAH-M • Tool holder SK 40 • Rotatable milling head • Without vertical milling unit • Closed work area • Coolant system • Machine weight approx. 2000 kg Technical data • Travel distances: 3 axes (X, Y, Z) • Table dimensions: approx. 800 x 400 mm • Max. tool diameter: 125 mm • Max. tool weight: 6 kg • Machine dimensions: approx. 2300 x 2100 x 2100 mm • Machine weight: approx. 2000 kg Equipment • Protective cover with viewing window • Control panel • Machine lighting • Emergency stop switch Auction-ID: A7-45863-1

Machine type: Universal milling machine Manufacturer: ALCERA (AMSTUZ / LEVIN) Model: 6S Year of manufacture: 1979 Table size: approx. 1100 x 265 mm Longitudinal travel (X): approx. 700 – 800 mm Cross travel (Y): approx. 200 – 250 mm Vertical travel (Z): approx. 400 mm Spindle: Horizontal spindle with vertical milling head Spindle taper: ISO 40 Spindle speed: approx. 30 – 1000 rpm (multi-stage gearbox) Feed: Mechanical feed on X/Y/Z axes Control: Heidenhain digital readout (3-axis DRO) Condition: Used, visible signs of wear and chips Remarks: Robust conventional milling machine suitable for toolroom and general machining; equipped with digital readout for improved positioning accuracy Approx. own mass: 1800 – 2200 kg Approx. dimensions (LxWxH): 2000 x 1800 x 1800 mm Auction-ID: A7-45364-9

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.14500 KgTool changerTool changer planevertical Type of gripperDouble gripper Number of tools90 Max. tool length370 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinPackage Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Table plate C-axis d 680 mm / 26.8 in Speed C-axis 1.000 min-1 Integrated balancing sensor Motor spindle speedMASTER® HSK-A63 Spindle speed 20 ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools30 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary tableTable surface Ø650 mmCentre bore 32 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 9Distance between T-Slots 63 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degreeRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +/- 120 degreeDirect measuring systemDirect path measurin ...

Steinel SH4 milling machine. Good condition. With lots of accessories. The machine runs and does what it is supposed to.

Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...

Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...

Milling cutters, End mills, drop cutters, Unused Mostly Kestag, Seco, Sandvik, Walter, Böhlerit, ... different diameters, singles, sets or entire batches ! Please request a list !

Key data: 1600 mm, 800 mm, 650 mm

CNC bed milling machine with Heidenhain control 415, good condition, hydraulic tool clamping, coolant device, central lubrication, lighting,.. Travel X1600/y800/z650/ Spindle holder SK 50 Spin elder speed 60-1800rpm Working feed rate 10-3000mm/min Rapid traverse 10m/min Table clamping surface 1800x610mm Machine weight 9500kg Table load 3000kg

A conventional milling machine Zimmermann including a Heidenhain digital display is available. Table dimensions X/Y: 1400mm/800mm, tool holder: SK40, travel X/Y/Z: 1600mm/900mm/300mm, spindle-table distance range: 30mm-1180mm, milling head swivel: 45°/90°, feed rate: 2400mm/min, speed: 2800rpm. Machine dimensions X/Y/Z: approx. 3600mm/3000mm/3150mm, weight: approx. 5000kg. Documentation available. An on-site inspection is possible.

Control Heidenhain TNC 640 Speed [rpm] 5000 Travel X/Y/Z [mm] 4500/1800/1300 General: Control Heidenhain TNC 640 Travel X/Y/Z 4,500/1,800/1,300 mm Speed 5,000 rpm Tool holder SK 50 Milling head (spindle): Technology Diagonal head with gear spindle Pitch 0.001° Speed 5,000 rpm Tool holder SK 50 Power max. 43 kW Torque max. 1,045 Nm Media Feedthrough KSS + Blown Air Work table: Clamping area 6,000 x 1,100 mm T-slots 6x 22H12, spacing 140 mm Tool magazine: Technology Chain Magazine Number of stations 40 Tool changer double gripper (horizontal/vertical) Tool diameter max. 125 (250) mm Tool length max. 400 mm Equipment / Accessories: Displacement measuring systems Directly in all axes Chip disposal chip conveyor Coolant supply IKZ system with filter, 20 bar Workpiece Measurement Radio Probe M&H Setup operation Electronic handwheel HR 510 Adaptive Cont ...

Haas Automation, VF2, Control : Micro-Haas VF2 X-1250mm, Y-508, Z-600, Spindle : SK40 , 10 - 7500 rpm , Feed rate : 0 - 4500mm/min, rapid traverse : 15m/min Table load : 1000kg Weight : 6to, L- 370cm, W330cm, H-290cm, No shift work !

CNC milling machine, cover FP3A, spare parts machine, control defective / incomplete We sell parts. of this machine, SK40 milling head, with quill, tool changer, ... Control unit, table, spindles, motors, spindle nuts, ... Or total: Euro 1800,- ex works

SK40 milling head, with flange, with quill and tool clamp, swivelling. good condition. Is from a CNC tool milling machine MAHO 700C, We would also have a smaller one from a DECKEL FP3A. Also with quill and clamping. Also sell other spare parts of this MAHO 700C, clamping table, control parts, motor, spindles, control panel. ...