134,310 used machines on RESALE, but how to find them? Machine Search
Weinig Unimat 23E automatic planing and profiling machine for four-sided planing and profiling of timber, featuring a mobile spindle for automatic adjustment and a grooving bed (optionally available without the grooving bed) for short and curved workpieces, as well as a long dressing table. Technical data: Optional: Conversion to a conventional smooth table, on request. Spindles: 5 Spindle 1: Bottom / 40 mm / 5.5 kW Spindle 2: Right / 40 mm / 7.5 kW Spindle 3: Left / 40 mm / Shared motor with spindle 2 Spindle 4: Top / 40 mm / 7.5 kW Spindle 5: Bottom / 40 mm / 5.5 kW Working width: 230 mm Working height: 160 mm Feed: 4 kW / 524 m/min Condition: Gebraucht Location: Tauberbischofsheim, Germany
Bäuerle Type 125/02 heavy-duty thickness planer for the precise sizing (thickness planing) of solid timber and wood-based materials. The robust construction and powerful drive ensure consistent planing results and a long service life. Accessories included. Technical data: Planing width: 610 mm Planing height: 200 mm Planing shaft: Z4 strip planing blades Feed speed: 714 m/min Motor power: 4.4 kW Weight: approx. 1,150 kg Condition: Gebraucht Location: Tauberbischofsheim, Germany
planing lenght: 625 mm planing width: 570 mm total power requirement: 3 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2,4 x 1,4 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Four-sided planer Working height: 740-750 mm Max working width: 305 mm Min working width: 50 mm Max workpiece height on 2 sides: 310 mm Max workpiece height on 4 sides: 160 mm Min workpiece height: 17 mm Feed speed steplessly adjustable: 10-60 m/min motors: bottom 11 kW, top 11 kW, right 7.5 kW, left 11 kW feed motor: 7.5 kW motor height adjustment: 1.5 kW speed 5,500 rpm driven top and bottom feed rollers
Jointer New Working width: 520 mm Table length: 2773 mm 5800 R.P.M Motor: 5.5kW HSS Putters 780 KG Auction-ID: A1-49230-7
Planer CHAMBON R233 Used machine Revised Year:1988 Technical characteristics: Electric up/down Star/Triangle Start Emergency stop Working width: 500 mm HSS Irons Auction-ID: A1-49230-1
Planing width: 410mm, working height: 3mm-240mm, max. stock removal: 5mm, feed speed: 12m/min, thicknessing table X/Y: 775mm/423mm, extraction port diameter: 120mm, operating hours: approx. 350h, weight: approx. 361kg. Equipped with 4-knife TERSA cutterblock for quick knife changes without adjustment or screws, solid gray cast iron thicknessing table with 4-column guide on four large spindles, integrated lifting device for a stable table position without additional locking, manual thicknessing table adjustment with numerical readout and reading accuracy of 1/10mm, helical-toothed steel infeed roller for gentle stock removal from 0.2mm and satin-finished steel outfeed roller. The machine is currently in storage.
x-travel: 3.500 mm y-travel: 2.600 mm z-travel: 1.000 mm Control: HEIDENHAIN iTNC-530 table-size: 4.500 x 1.500 mm table weight: 15.000 Kg distance between columns: 2.300 mm rapid travel x/y/z: 15/12.000 mm/min feed: 5 m/min milling head: Automatic Orthogonal UAGA milling head swivable ca.: 2,5 x 2,5 ° spindle turning speed range: 3.000 U/min spindle drive: 22 kW transmission ratio: 2 tool taper: ISO 50 Tools changer: 30 fach/tools handwheel: HEIDENHAIN HR 410 total power requirement: kW weight of the machine ca.: 28 t dimensions of the machine ca.: m - Direct-Drive Spindle Head - Direct-Drive Spindle Speed 5,000 rpm - Automatic Retractable Support on the Right Side for Orthogonal UAGA Head - Automatic Retractable Support on the Left Side for Direct-Drive Spindle Head - Cover - Automatic Head Clamping The data for this ad was created with ModulMWS - the software solution of LogoTec ...
Motor 5 Kw, with automatic star / triangle, emergency stop , with thermal motor protection. Planer shaft 120 mm x 500 mm with four planer blades, Tiltable with a quickly adjustable \"Martin\" guide. Table tops can be pulled out for profiling with profile knives. With magnetic chisel adjustment blocks and a Harwi safety cap Auction-ID: A1-48994-8
vertical flat bench ironer, 1.5 Kw, planing head D=120 mm H=100 mm. With three HM blades. Guide 860 mm, depth of quick adjustment from 0 mm to 6 mm. Auction-ID: A1-48994-40
Various blades, adjustment blocks for depth adjustment, Auction-ID: A1-47360-92
Serial number: 440.07.476.12 Support surface: approx. 1500 x 300 mm with suction nozzle Reference: Wup - Lot 12 Auction-ID: A7-49882-296
Total of 2 pieces, Unused, Item No.: 12651380540, Type: 66-12-IK-Z6, further details see photos
Total of 3 pieces, Unused, Item No.: 12651380520, Type: 52-12-IK-Z4, further details see photos
Floor planer / electrode welding machine see pictures Condition: unchecked (6) Auction-ID: A7-50084-178
Equipped with: long cast iron input and output table, adjustable longitudinal guide, handwheel for height adjustment, guard above the planing shaft, stable steel machine base, electric drive. Auction-ID: A1-47363-101
Second-hand Weinig high-performance planer, model Hydromat 17BL, for professional woodworking. The machine has ten spindles and is suitable for industrial planing and profiling of timber. With a working width of 170 mm, a working height of 120 mm and a feed rate of 60 m/min, it is designed for high-performance continuous processing. Technical data: Spindles: 10 Spindle 1: Bottom / 7.5 kW / 50 mm Spindle 2: Right / 7.5 kW / 50 mm Spindle 3: Left / 7.5 kW / 50 mm Spindle 4: Right / 7.5 kW / 50 mm Spindle 5: Left / 7.5 kW / 50 mm Spindle 6: Top / 11 kW / 50 mm Spindle 7: Bottom / 7.5 kW / 50 mm Spindle 8: Top / 7.5 kW / 50 mm Spindle 9: Bottom / 7.5 kW / 50 mm Spindle 10: Universal / 7.5 kW / 50 mm Working width: 170 mm Working height: 120 mm Feed rate: 60 m/min Feed motor: 15 kW Table: Hard-chromed Condition: Gebraucht Location: Tauberbischofsheim, Germany
Manufacturer: HUSQVARNA Engine: HONDA GX petrol engine Equipment: manual start by starter, manual adjustment of the working depth, driving handlebars, chassis on wheels. Notes: Used machine. Auction-ID: A1-50088-23
Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...
Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...
Complete system with all accessories required for installation and operation, see below! Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter Feed rate 12000 mm / min // w axis 6000 mm / min Xua2eg8fx Rotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filter All BWF fixators for installation of machine bed and panel
1 gebr. Corundum disc mill type T4, in vertical version Technical data: Make: KORUMA Type: T4 Drive power: 18.5 KW three-phase motor (completely new drive motor) Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 54 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: shaft sealing ring Side seals: EPDM Connections: Suction side DN 80 DIN 11851 Capacity: 300-1800kg/h Grinding discs: 240mm Gehäuse_ with double sheath for heating/cooling
Shell end mills, shell mill cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 105 x 19 mm, cross-cut -Socket: Ø 27 mm -Weight: 0.8 kg
Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...
Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...
Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...
Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. Technical specifications: External dimensions LxWxH: 1970x2150x1950 mm Weight: approx. 950 kg Clamping surface XxY: 1230x1320 mm Travel XxYxZ: 1200x1300x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reve ...
End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.
For sale is the four-roller grist mill of the Seeger brand, which can be seen in the pictures The mill was in use in a brewery until the end and is functional. The bearing has already been overhauled on the predecessor. Specifications: Manufacturer: Seeger Model: VSM 350 Capacity: 750 kg/h Measurements: see last picture
used
For Sale Used Corundum Disc Mill / Mustard Mill MK95
Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Overhauled in 2012Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNerg connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot-
Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder
Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x
Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base
End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill, prism cutter -Angle milling cutters: Attachment angle milling cutters, prism milling cutters -Type: Ø85 x 35 mm -Hole: Ø 27 mm -Quantity: 1x milling cutter available -Dimensions: Ø 85 x 35 mm -Weight: 0.8 kg
- Fast comminution with rotational speeds up to 400 rpm - Loss-free grinding even below 1 μm - Uniform fine comminution of large sample amounts - Safe tensioning of the bowls with Safe-Lock-System - Useful capacity up to 4 x 225 ml Currency; MYR PIC: - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)
Millipore MPODPILOT Filter Kit with Hydraulic Hand Pump Auction-ID: A1-49883-23
Various diameters, maximum 400 mm; approximately 26 pieces; including pallet box Auction-ID: A1-49785-99
maximum number of results exceeded
please refine your search
2.500 € 
