planer mill used for sale

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 136 by 178 mm 31 mm high -Drawing with the photos -Dimensions: 330/90/H220 mm -Weight: 13 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 96 by 129 mm 22 mm high -Drawing with the photos -Dimensions: 290/80/H190 mm -Weight: 12.5 kg

Copy Shaper / Copy Lathe Brand: Geiger Model: 8CD Milling + Grinding Workpiece length max. 1500mm

Hammer mill Working width: 1600 mm Rotor diameter: 1000 mm Drive: 75 kW Application: Shredding of all impact-brittle materials such as - impact-resistant plastics - E-waste -Wood waste - mineral insulation waste (e.g. glass wool, rock wool,...)

Tool holder, milling holder, milling tool -Number: 58x SK40 mounts -different designs -partly with pull studs -Spindle tools: different diameters -Sale: only complete -Weight: 108 kg

Tool holder, milling holder, milling tool -Number: 10x SK50 mounts -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 40 kg

Tool holder, milling holder, milling tool -Number: 9x SK50 mounts -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 34 kg

Fine mill / impact disc mill Grinding disk diameter: 800 mm Drive: 90 kW new machine Scope of application: NEUE HERBOLD Impact Disc Mills of the ZM series are fast-running fine mills for pulverizing brittle, medium-hard or impact-resistant materials and granules. Typical application is the fine grinding of H-PVC / PE / PC / etc. Impact Disc Mills from the NEUE HERBOLD process e.g.: - Pipe and profile regrind from extrusion - Pre-shredded panel and edge strip waste - slides - Amorphous and brittle products from the areas of the food industry, the chemistry and pharmacy

Copy milling machine - Copy longitudinal milling machine Functionally tested Incl. Tools

Swing Chiselstemmer Measuring machine Stemmer swing chisel

:::SPECIFICATIONS::: CNC Model: Siemens Tool connection: SK 40 Spindle power: 9Kw Number of spindle revolutions: 12000 Number of tools: 30 X Shaft Stroke: 600mm Y-axis stroke: 450mm Z-axis stroke: 450mm Rapid feeds linear axes X Y Z: 35m/min Guides: roller Tilting rotary table: yes Round table type: continuous Tilting rotary table grades: + - 110° Table size: diameter 280mm Load allowed on the table: 200Kg Chip evacuator: carpet Other technical data: maximum tool diameter 80 (125) mm Chip/chip time change 5.5 sec Working feed speed 1 - 30.000 mm/min Resolution 0.001 mm :::D IMENSIONS AND WEIGHT::: Length: 3500mm Width: 3500mm Height: 2800mm Weight: 6500Kg

Okoma PN 2 tenon cutter Brand: Okoma Type: PN2 Year of construction: M-No.: Machine data: saw: 3.0 KW, 2.800 rpm, tool: ø400 mm, 140 mm cutting height - turret head cutting height Slot spindle 7.5 kW - 2,800 rpm, tool: ø400 mm, 4,000 rpm, spigot length: 170 mm spindle clamping length: 160 mm Table: Electric, with pneumatic workpiece clamps Tish height: Travel 80 mm Stop: Stop can also be used as miter stop Dimensions: approx. 2.2 m x 1.6 m, 1.7 m high, plus tenon table: 0.50.8 m Weight: 600 KG

Tool holder, milling holder, milling tool -Number: 4x holder SK50 -different designs -Adapter to: MK1/MK3/MK4/MK5 -Sale: only complete -Weight: 11.8 kg

Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for tool changers -Sale: only complete -Weight: 10 kg

Panhans 261 tenon cutter Brand: Panhans Type: 261 M-No.: 1112 Machine data: saw: 2.6 KW, 3.000rpm, tool: ø400 mm, 160 mm cutting height Slot spindle 7.5 kW - 4,000 rpm, tool: ø400 mm, spigot length: 170 mm spindle clamping length: 160 mm Table: Manuel, with pneumatic workpiece clamps Tish height: Travel 80 mm Stop: Stop can also be used as miter stop Dimensions: approx. 1.9 m x 1.6 m, 1.7 m high, plus tenon table: 0.50.8 m Weight: 600 KG

Tool holder, milling holder, milling tool -Number: 15x SK50 mount -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 50 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 165 volts -Power: Motor 0.22 kW 17250 rpm at 300 Hz -Socket: Ø 20 mm -Thread: right -Dimensions: 200/70/H85 mm -Weight: 1.9 kg

Basic features: X axis travel: 6.000 mm Y axis travel: 900 mm Z axis travel (vertical travel): 2000 mm automatic head index 2,5° spindle speed 3.300 rpm spindle taper ISO 50 stolle floor: 7000x1500 mm - nr. 6 T-slots rotary table B axis 360 positions - 5 ton load capacity CNC Heidenhain TNC 426 chip conveyor ATC 60 Total power: 60 kW - 380 V machine in excellent conditions, ready to work. NB: The aforementioned technical data, taken from the manufacturer's technical data sheet, are to be considered non-binding and subject to change without notice.

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 74 by 88 mm 14 mm high -Bore: 56 mm -Drawing with the photos -Dimensions: 100/140/H165 mm -Weight: 5.3 kg

Verboom tenon milling machine Brand: Verboom Type: PN 5 LINKS Standard: BHG / SHA adapted according to the currently valid regulations Labour legislation applicable within the EU Machine data: Pinon milling machine with 5 processing units (1 saw + 4 milling machines) 1. Saw unit positioned over the workpiece, 4.0 kW, ø400 mm 2 tenon milling unit over the workpiece with 2.2 kW 3. Pinon milling unit below the workpiece with 2.2 kW 4. Vertical milling spindle (slot milling unit) with ø40 spindle and 200 mm Clamping length, 4.0 kW direct drive 5. Vertical milling spindle (slot milling unit) with ø40 spindle and 200 mm Clamping length, 4.0 kW direct drive All motors are equipped with zero branch safety, The machine has a pressure guard so that the workpiece must be clamped before the aggregates start, The hood and the protective curtain are equipped with door switch. ...

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW at 2820 rpm at 50 Hz -Voltage: 400 volts -Shaft mounting: Ø 30 mm -Dimensions: 430/230/H145 mm -Weight: 33 kg

Max diam 250 , max lenght 2000, 3 x heads , change gears

- technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed

Perlmühle Drais PM 1 RL-V Explosion protected version Grinding tank 1.3 l Agitator power 2.5 kW with feed pump Revision in 2005 Very good condition, straight from production!

Tool holder, milling holder, milling tool -Number: 25x SK50 mounts -various: versions -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 100 kg

End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm -Recording: SK50 -Manufacturer: Hoffmann -Type: KRE80-321 -Order No.: 229.810.00 -Weight: 7.8 kg

Refer to code 1020 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Perlmühle Drais PM 25 RL-V Explosion protected version Grinding tank 26 l Agitator power 24 kW with feed pump Very good condition, straight from production!

Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm -Adjustment: SK50 -Manufacturer: WIDIA -Type: 06306 Widax M30 -Number: 3x milling cutters available -Price: per piece -Dimensions: 224/100/H100 mm -Weight: 5.6 kg

end mill, end mill, milling cutter -Condition: Like new -Diameter: 50 mm -Working height: 100 mm -carbide-tipped -Recording: SK50

Milling teeth, milling tooth, wear tooth -Milling teeth: 43 pieces -Hole: Ø 17 mm/Ø 19 mm -various: lengths -Sale/Price: complete -Weight: 11.6 kg

Refer to code 1021 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

WAGNER FCU 1600 universal milling machine manufactured in Germany in 1998 is designed for precision machining of workpieces in X,Y,Z axes with feeds of 1200 mm (X axis), 700 mm (Y axis) and 500 mm (Z axis). The machine characterised by its high reliability and efficiency performs the milling of workpieces on a large work table with a length of 1600 mm and a width of 500 mm using a precision spindle rotating at a maximum speed of 2050 rpm. The milling machine is also equipped with measuring rulers and digital readouts. The total weight of the machine is 4000 kg. Technical data of the WAGNER FCU 1600 milling machine - feed rates in the X/Y/Z axis: 1200/700/500 mm - feed speed in the X axis: 10-1000 mm/min - feed speed in the Y axis: 10-1000 mm/min - feed speed in the Z axis: 5-500 mm/min - rapid traverse in the X/Y/Z axis : 3000/3000/1500 mm/min - working table dimensions (L x W): ...

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Feed: -Speeds: 3000, 4500, 6000, 9000 rpm -Dimensions: 1400/800/H1480 mm -Weight: 600 kg

Refer to code 1022 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

NEW Labratory Mill Rolls 170 x 465mm Description attached! Next to this we are able to offer all sizes of Mills from Labratory up to 100" (2500mm) for attractive price! Please ask us!

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1120 rpm -Shaft mounting: Ø 30 mm -Quantity: 1 available -Dimensions: 985/290/H185 mm -Weight: 68 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1720 rpm -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 910/290/H190 mm -Weight: 58 kg

Refer to code 1023 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1420 rpm -Shaft mounting: Ø 30 mm -Quantity: 1 available -Dimensions: 670/290/H190 mm -Weight: 57 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 2.4/3.3 kW 1720/3420 rpm at 50 Hz -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 660/290/H185 mm -Weight: 61 kg

Refer to code 1024 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1410 rpm at 50 Hz -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 660/280/H185 mm -Weight: 52 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 2.35/3.3 kW 1420/2850 rpm at 50 Hz -Shaft holder: Ø 30 mm -Dimensions: 665/290/H180 mm -Weight: 61 kg

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.5 kW 4700 rpm at 80 Hz -Voltage: Y 400 volts -Shaft holder: Ø 32 mm -Tool -Dimensions: 645/235/H150 mm -Weight: 55 kg

Refer to code 1025 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.