We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,376 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Manufacturer: Homag, Type: KAL 310, Year: 2004, Control: NC 21, Software: Homag, Min-max edge material mm: 0,5-3, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 24, Axis control: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: einfach, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: lyes, Corner tracing type: FK 11, 2 motors: 2, Radius scraper: yes , Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Cleaning nozzles: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Workpiece support: yes, Machine lenght mm: ca.9,5, Noise enclosure: yes, Return type: Bargsted ...
used
Manufacturer: IMA PU Kantenbearbeitung, Type: Combima, Year: 2003, Control: ima, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 6-30, Einlauflineal gesteuert: yes, Premilling: 2 X 6,6, IR zone: 2 , Power per lamp: 2 X1,5, Coil magazine: 32, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Rolling chain: yes, Spraying system 2: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Separation agent setup: yes, Year :2003
used
Manufacturer: Brandt, Type: KD 85, Year: 1998, Control: Homatic NC 21, Min-max edge material mm: 0,4-20, Work piece width min-max mm: 70, Min.-max. workpiece height in mm: 8-55, Min-max feed m/min: 7+25, Einlauflineal gesteuert: yes programm, Premilling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: 8 Kilo, Number of sanding units: 3, Edge sanding: 1, Profile sanding top bottom: 2, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Compressed air bar: 6, Machine lenght mm: 10900, Noise enclosure: yes, FREE TEXT: Schiebeanschlag Einführung Rechtwinkliger Teile/Dr ...
used
Key data: 5 , 300 mm, 200 mm
Spindle arrangement: scoring saw at the bottom - planing shaft at the bottom - top - right - left Diameter of spindles: 40-X-X-50-50 Spindle Speed: 5400 Counter bearings: 2-3 Jointer: 2-3 Engine powers: 15-45-55-22-18,5 Adjustment of the working width: digital Adjustment of the working height: digital Feed speed : 50 - 200 Feed motor: 45 KW Feed: Cardan Horizontal tool head D205 Vertical tool head D160xH100 Z12 Table height constant approx. 1000mm Diameter of suction nozzles 200-250-160-160-120 Weight 13000 kg
used
Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Year: 2000, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2, Year :2000
used
Manufacturer: IMA, Type: Compact P/C F 6220, Year: 1996, Control: Imatronic 121, Min-max edge material mm: 14-55, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Min-max feed m/min: 8-20, Infeed table: yes, mit Vakuum: 2 X 3 kw, Power per lamp: 1-fach, kW Leistung Laser: yes, Coil magazine: yes, Strip magazin: yes, Bevel milling: MFA. 8.346, radius milling: yes, Magazin : yes nicht schwenkbar, Vertical grooves: R 3 und R 2, Nuten : yes, Radius scraper: yes, Type of scraper: 8.50, Spraying system 2: yes, Edge sanding: Rolle, Buffing unit: Ja, Free places: yes, Year :1996
used
Manufacturer: Homag PU Verleimung , Type: KL 79/2/A20/S2, Control: Homatic NC 21, Work piece width min-max mm: 60, Min-max feed m/min: 10-25, Axis control: Einlauflineal, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Corner tracing type: FK 13, 2 motors: yes, Vertical grooves: 2, Grooves, slewable-controlled: yes, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Ersatzverleimteil : PU, Bonding part EVA: yes, Edge sanding: KS 10, Profile sanding top bottom: yes, Buffing unit: yes, Top pressure belt/roller: Band, Work piece refeeding: Bartgstedt ZHR, Compressed air bar: 6,
used
Manufacturer: Homag , Type: KAL 310/7/A3/S2, Year: 2004, Control: NC21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 55/100, Min.-max. workpiece height in mm: 12 - 60, Edgeband height max mm: 60, Min-max feed m/min: 10-30, Axis control: Verleimteil/Druckzone/Formfräsen, Servo Einschubtisch: yes, mit Vakuum: 2x 3Kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2 Rollen, Coil magazine: HL 84, Strip magazin: 2 X0,55 kW, Min.-max. batten magazine mm: 2 X 0,4 kW, Mitre stations: yes, Bevel milling: FK 11/Verstellung automatisch, radius milling: 0,55 kW, Vertical grooves: PN 20, Radius scraper: yes, Rolling chain: yes, Spraying system 2: yes, Ersatzverleimteil : 5, Edge sanding: Riemen, Edge sanding radius: yes, Free places: yes, Year :2004
used
Manufacturer: Homag, Type: KL 10/21/QA, Year: 1999, Program: Homatic, Control: PC 21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 50, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-30, Axis control: yes, Infeed table: no, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, IR zone: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: yes, Radius milling axis adjustment: yes, Corner tracing type: FK 13, 2 Motoren: 2, Magazin : 2 X 12, with tool holders: HSK, Grooves, slewable-controlled: Freiplatz, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Corner trace buffing: no, Corner trace buffing: no, Bonding part EVA: 2 Stück, Number of tools per tool-magazine: 2 X 8, Buffing unit: yes, Roller/belt: Riemen, Freiplätze: ...
used
Manufacturer: Homag mit Doppelenprofilerformatteil, Type: KFL 23/03/27/PU/30+ZHR 05, Year: 2000, Program: NC 21, Control: Homatig, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 250-2600, Min.-max. workpiece length in mm: 150-1300, Min.-max. workpiece height in mm: 10-55, Edgeband height max mm: 60, Min-max feed m/min: 30, Finished product: Fronten Küche, Axis control: yes, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: Schutzfräsen/zerspanen/zerspanen, IR zone: yes, Coil magazine: 2 X 24 fach, Strip magazin: no, Min.-max. batten magazine mm: no, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: FK 13/6 fach, Grooves, slewable-controlled: 2, Radius scraper: yes, Type of scraper: yes, Scraper with axis adjustment: yes, Cleaning nozzles: yes, Bonding part EVA: PU Verleimteil, Number of tools per tool-m ...
used
Manufacturer: IMA, Type: Compact/U/812/F, Year: 1996, Program: IMA, Kantenmaterial : 0,4-12, Work piece width min-max mm: 70, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 8-50, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 15-25, Vorwärmeinheit IR: yes, Premilling: yes, Panel length min mm: 200, Leistenmagazin min-max mm: yes, Coil magazine: yes, Strip magazin: yes, Premilling: yes, Mitre stations: yes, Mitre stations: yes, Radiusfräsen : yes, Contour milling type: yes, Eckenkopierfräs Motore: 4 Motore, Nutfräsen: yes, Number of sanding units: 3, Kantenschleifen: 1, Profilschleifen oben unten: yes, Radius scraper: yes, Flat scraper: yes, Top pressure belt/roller: Rolle, Year :1996
used
Manufacturer: IMA, Type: AVM/K/I/G 80/822/SR/ L 20, Year: 1991, Min-max edge material mm: 3-15, Work piece width min-max mm: 80, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 50, Min-max feed m/min: 18, Finished product: Leistenmaschine, Premilling: yes, Fine milling: yes, Coil magazine: yes, Min.-max. batten magazine mm: 3-15, Mitre stations: yes, Pre-milling: yes, Top pressure belt/roller: Rolle, Kantenschleifen gerade: yes, Kantenschleifenradius: 2, Werkstückunterstützung: yes, Compressed air bar: 6, Machine lenght mm: 11000, Year :1991
used
Manufacturer: IMA , Type: Advantage 5620, Year: 2001, Program: IMA, Control: IMA, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 70-1300, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 45, Min-max feed m/min: ca. 20, Premilling: yes, IR zone: yes, Lasertechnik: yes, Kw-Leistung Laser: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: yes, Grooves, slewable-controlled: yes, Type of scraper: yes, Cleaning nozzles: yes, Edge sanding: yes, Profile sanding top bottom: Rolle, Roller/belt: 6, Year :2001
used
Manufacturer: IMA Kantenbearbeitung , Type: U/F 720 V/Compact, Program: yes, Control: no, Min-max edge material mm: 3, Work piece width min-max mm: 60, Min-max edge material mm: 3, Work piece width min-max mm: 60, Edgeband height max mm: 70, Min-max feed m/min: 3, Finished product: 250, Soft forming: 2, Axis control: no, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: Granulat und PU, Profile milling: no, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, IR zone: MFA 843, Coil magazine: yes, Strip magazin: yes, Radius milling axis adjustment: Riemen, Corner tracing type: 10-25, 4 motors: 6,
used
Manufacturer: Homag, Type: KFL 10/42/QE/S, Year: 2002, Program: yes, Control: Homatic NC 21/ES00, Work piece width min-max mm: 280-600, Min.-max. workpiece length in mm: 320-2500, Min.-max. workpiece height in mm: 8-60, Edgeband height max mm: 30-50, Kantenmaterial min-max mm: 0,3, Vorschub min- max m/min: 10-40, Finished product: Spanplatten aufdoppeln bekanten, Softforming: yes, Einlauflineal gesteuert: yes, Premilling: yes, Profile milling: yes, Trennmittelauftrag: yes, IR zone: yes, Coil magazine: 2-fach, Premilling: yes, Mitre stations: yes, Vorfräsen: yes, Fasefräsen: yes, Radiusfräsen Achsverstellung: yes, Oszilierend: yes, Reinigungsdüsen: yes, Ersatzverleimteil : yes, Verleimteil EVA: yes, Düse: yes, Year :2002
used
Manufacturer: OTT, Type: M259, Year: 1994, Program: Ott, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 50, Min-max feed m/min: 8-24, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes steuerbar, radius milling: yes steuerbar, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Compressed air bar: 6, Noise enclosure: yes, Year :1994
used
Manufacturer: HolzHer, Type: 1444, Year: 1991, Min-max feed m/min: 10 - 20, Premilling: yes, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Top pressure belt/roller: Rolle, Year :1991
used
Manufacturer: IMA, Type: Compact PC/KIF 7220, Year: 1997, Programm: yes, Achsensteuerung: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Coil magazine: yes, Strip magazin: yes, Premilling: yes, Power per lamp: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: yes, Number of tools per tool-magazine: no, Radius scraper: yes, Flat scraper: yes, Buffing unit: yes, Moulding units swivel-mounted: yes, Schwenkbereich Grad: 45-90, Top pressure belt/roller: Rolle, Feeding speed max m/min: 10-20, Compressed air bar: 6, Year :1997
used
Manufacturer: IMA Kantenbearbeitung , Type: U/F 720, Year: 1995, Programm: yes, Achsteuerung: no, Edgeband thickness max mm: 3, Edgeband height max mm: 60, Edgeband thickness max mm: 3, Edgeband height max mm: 60, Work piece thickness min mm: 70, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Coil magazine: 12, Strip magazin: no, Premilling: yes, Power per lamp: yes, Glue system granulate/cartridge: Granulat, Soft edge single side: no, Mitre stations: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Feeding speed max m/min: 10-25, Compressed air bar: 6, Year :1995
used
Manufacturer: Homag, Type: KAL 310/7/A20/S3 , Year: 2011, Control: PC 22, Software: Windows XP/Woodscout, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 12-60, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 18, Axis control: einlauflineal, Infeed table: Servo, Servo Einschubtisch: yes, mit Vakuum: 2 X 3 kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2-fach, Laser technology: yes, kW Leistung Laser: yes, Coil magazine: HL 84, Strip magazin: 2 X 1,5, Bevel milling: FK 8-fach Wechsler, radius milling: FK 13/Achsverstellung, Vertical grooves: Multiziehklinge MN 21 3 Profile, Grooves, slewable-controlled: PN 10, Nuten : yes, Radius scraper: yes, Servo copying: yes, Spraying system 2: A 20, Ersatzverleimteil : 5 kg, Number of sanding units: yes, Profile sanding top bottom: Einlauf und Auslauf, Barcode: möglich, Workpiece supp ...
used
Manufacturer: Homag , Type: KAL 310/8/A20/S2, Year: 2005, Control: PC 22, Work piece width min-max mm: min 55/100, Min.-max. workpiece height in mm: 12 - 60, Min-max feed m/min: 18 - 24, Einlauflineal gesteuert: yes, Premilling: 2 x 3kW, Application of separation agent: yes, Coil magazine: 2, Mitre stations: Fase / Gerade, Pre-milling: 2 x 1,5 kW, Bevel milling: FK 13 - 8Fach, radius milling: 4 kW, Corner tracing type: MN 21, Flat scraper: FA 11, Bonding part EVA: A 20, Top pressure belt/roller: Band, Work piece refeeding: vorinstalliert, FREE TEXT: Frreiplatz, Year :2005
used
Manufacturer: Brandt , Type: KS 25, Year: 1991, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 55, Min-max feed m/min: 14, Premilling: no, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Flat scraper: yes, Bonding part EVA: yes, Top pressure belt/roller: Rolle, Werkstückunterstützung: yes, Freiplätze: keine, Year :1991
used
Manufacturer: Felder, Type: MG 580-1, Year: 2012, Control: yes, Min-max edge material mm: 0,4-5, Work piece width min-max mm: min. 70, Min.-max. workpiece length in mm: min. 140, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 11, Premilling: yes, Mitre stations: yes, Weight approx. kg: 990, Year :2012
used
Manufacturer: IMA Steckprofileindrückmaschine, Type: Nowimat/I/G80/500, Year: 2001, Control: Ima, Work piece width min-max mm: ca.60, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: ca.20, automatischer Einzug: yes, Premilling: 4 X 2,2 kw, Coil magazine: 2 Stück Stegprofil, Mitre stations: yes, radius milling: Eindrückstation Profil, Work piece refeeding: yes, Hover cussion table: yes, Hover cussion table: yes, Year :2001
used
Manufacturer: IMA, Type: Advantage 8200, Year: 2003, Min-max edge material mm: 0,4-20, Work piece width min-max mm: min. 60, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 4-20, Premilling: yes, Mitre stations: yes, Radius scraper: yes, Flat scraper: yes, Profile sanding top bottom: yes, Weight approx. kg: 4400, Year :2003
used
Manufacturer: KDP Kantenanleimmaschine, Type: KDP 111 SL, Year: 1995, Min-max edge material mm: 0,5-2,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: 8, Lasertechnik: yes, Mitre stations: yes, Radius milling axis adjustment: no, Year :1995
used
Manufacturer: Homag, Type: KLO 76, Year: 1994, Min-max edge material mm: 0,5-3,0, Min.-max. workpiece length in mm: 150, Edgeband height max mm: 55, Min-max feed m/min: 10-25, Premilling: no, IR zone: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, radius milling: yes, 4 motors: yes, Radius scraper: yes, Flat scraper: yes, 4 motors: yes, Ersatzverleimteil : yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Top pressure belt/roller: yes, Roller/belt: Riemen, Compressed air bar: 6, Machine lenght mm: 7500, Noise enclosure: yes, Year :1994
used
Workpiece thickness: 12 - 60 mm Feed speed: 18 - 24 m/min Edge thickness: 0.4 - 6 mm for roll edges, 0.4 - 20 mm for strips Equipment: manual fence at the infeed workpiece preheating Bonding unit: QA34 / A20 edge magazine Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Hood unit HL83, automatic adjustment phase/straight, 2 motors 0.4 kW Pre-milling unit: 2 x 1.5 KW Milling unit, with sensing, tiltable, 0.4 kW Mold milling unit FF 12, 4-way tool changer, 4 motors 0.4 kW universal milling unit profile sanding unit edge sanding unit Control: HOMATIC NC21
used
Manufacturer: Ott, Type: F 2530, Year: 2008, Min-max edge material mm: 0,2-25, Work piece width min-max mm: min. 65, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 10-16, Premilling: yes, Mitre stations: yes, 2 motors: yes, Type of scraper: Profil und flatch, Flat scraper: yes, Year :2008
used
Manufacturer: Ilcam Kantenbearbeitung, Year: ca.1990, Monting of the machine: Verleimteil/Kappen/Vorfräsen/Zieklinge, Min-max edge material mm: 0,5-12, Work piece width min-max mm: 65, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 10-20, Premilling: no, Fine milling: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Year :ca.1990
used
Manufacturer: Brandt , Type: KD 79/2 CF, Year: 2002, Min-max edge material mm: 0,5-3,0, Min-max feed m/min: 18, Axis control: no, Premilling: yes, Fine milling: yes, Application of separation agent: no, IR zone: no, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Year :2002
used
Manufacturer: IMA, Type: Compact F 12, Year: 1996, Control: Beckhoff, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Min-max feed m/min: 18, Infeed table: yes, Premilling: yes, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Corner tracing type: yes, 4 motors: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Year :1996
used
Manufacturer: Homag, Type: FKR 78/C/A/S3, Monting of the machine: zerspanerteil zum Einkürzen, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-40, Min-max feed m/min: ca.18, Infeed table: yes, Premilling: yes, Fine milling: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Work piece refeeding: Bargstedt, Roller/belt: Riemen, Compressed air bar: 6, Return type: Bargstedt TFU,
used
Manufacturer: Hebrock, Type: AKV 2001 DK, Year: 1997, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: 8, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: Radius, Corner tracing type: yes, 1 motor: yes, Radius scraper: yes, Bonding part EVA: yes, FREE TEXT: Zustand sehr gut, Year :1997
used
Manufacturer: Brandt, Type: KS 23, Year: 1988, Min-max edge material mm: 0,5-12, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 55, Min-max feed m/min: 12, Premilling: no, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Edge sanding: yes, Year :1988
used
Manufacturer: Lange Kantenfräsgerät, Type: B 600, Year: 2009, Moulding spindles: 2, Routing: yes, Min.-max. workpiece length in mm: 8-60, Vorschub min- max m/min: Handvorschub, Mitre stations: yes, Mitre stations: yes, Radiusfräsen : 1,5 mm, FREE TEXT: Fräsmotore Frequenzgeregelt, Year :2009
used
Manufacturer: Brandt, Type: KD 99, Year: 1998, Control: Homatic, Min-max edge material mm: 0,4 - 3,0, Work piece width min-max mm: 62, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 60, Edgeband height max mm: 62, Premilling: yes, Bevel milling: yes, Corner tracing type: yes, 4 Motoren: yes, Nuten : yes, Radius scraper: yes, 4 Motoren: yes, Compressed air bar: 6, Machine lenght mm: 8740, Noise enclosure: yes, Rückführung Typ: yes, machine ready for demonstration: yes, Year :1998
used
Manufacturer: Koch, Type: SBD - 320 , Year: 1994, Control: Programm, Working widht max mm: 1500, Arbeitstiefe max mm: 320, Working thickness max mm: 10 - 32, Saw diameter mm: 350, Work piece transport: Kette, Drilling support horizontal: 2, Drill gearings: 7, Drill gearings: 7, Drill support from top: 5, Drill gearings: 7, Belt conveyor: yes, Gluing: yes, Re-charging: no, Dovel insertion: yes, Raster 32 mm: yes, Horizontal drilling from both sides: yes, Wight approx. kg: 6000, Year :1994
used
• For applying security labels to both side flaps of a folding bo. • Output max. 100 cartons/min • Max. Folding box width in infeed direction crossways 180 mm, max. height 92 mm • Side conveyor belts • Upper retaining conveyor • 2 Label dispensers PAGOmat 6/2 A-100 with operating units • Label dispenser Height and crosswise adjustable • Label reels core diam. 76 mm, outer diam. max. 280 mm • Various controls via light barriers • Blow-out station for bad cartons with ejection countercheck • HMI Siemens Simatic Panel Touch, • PLC Siemens S7-300 CPU 314C-2DP • Mobile • Drive 400V/50Hz
used
Manufacturer: Biesse , Type: Stream B1 S3, Year: 2005, Control: NC 1600, Min-max edge material mm: 20, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 60, Min-max feed m/min: 25, Min.-max. batten magazine mm: 20, Bevel milling: yes, radius milling: yes, Radius scraper: yes, Buffing unit: yes, Year :2005
used
Manufacturer: Ott, Type: Euromatic FÜ, Year: 2001, Program: yes, Control: SPS, Work piece width min-max mm: 60 , Min.-max. workpiece length in mm: 60, Min.-max. workpiece height in mm: 10 - 60, Kantenmaterial min-max mm: 0,2 - 15, Vorschub min- max m/min: 12 - 20, Mitre stations: yes, Fasefräsen: yes, Flat scraper: yes, Rolle/Riemen: Rollen, Machine lenght mm: 8500, Wight approx. kg: 4200, Year :2001
used
Manufacturer: HolzHer, Type: 1411-1, Year: 2001, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 230, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11, Glue system granulate/cartridge: Patrone, Buffing unit: yes, Machine lenght mm: ca. 4.100, Wight approx. kg: ca. 1.100, Year :2001
used
Manufacturer: HolzHer, Type: Sprint 1310, Year: 2006, Edgeband height max mm: 45, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 10, Mitre stations: yes, Glue system granulate/cartridge: Patrone, Mitre stations: yes, Radiusfräsen : yes, Buffing unit: yes, Top pressure belt/roller: rolle, Compressed air bar: 6, Machine lenght mm: 3, Year :2006
used
Manufacturer: Koch, Type: Compact, Year: 1991, Control: Programm, Working widht max mm: 150-2500, Arbeitstiefe max mm: 200, Working thickness max mm: 80, Schwenkbereich Grad in X: +30-90, Dovel units: 3, Dovel diameter mm: 10-12, Drill gearings: 2, Drill gearings: 2, Drill gearings: 2, Drill spindles per support: 5, Gluing: yes, Dovel insertion: yes, Raster 32 mm: yes, Compressed air bar: 6, Wight approx. kg: 3000, Year :1991
used
• Equipped for toploader boxes • Output max. 20 cartons/min • Blank magazine • Blank transport • Gluing station with 2 glue nozzles for side flaps with Robatec Concept 4 hotmelt gluer • Folding station with folding stamp • Carton discharge with outfeed conveyor • Vacuum generation with Venturi nozzles • Touch screen Siemens Pro-Face • Elau Pac-Drive control with 1x Max-4 and 4x MC-4 • 4 formats for toploader cartons: • Blanks: 225x204, 284x263, 284x348, 397x458 mm • Ready glued WxDxH in throughfeed direction: 70x95x35, 70x95x65 mm and 70x182x65mm, 70x182x120 mm, other formats possible • Drive 24/400V/50Hz • Qualification documentation (IQ/OQ)
used
SCM Superset XL Four-Sided Planer + Feeder Working width 230mm Working height 140mm Number of spindles: 5 Spindle system: Bottom 5.5kw Rights 5.5kw Left 5.5kw Mount 7.5kw Universal 360° 7.5kw Drive on cardan shafts Variator speed adjustable 6-25m/min Pneumatic clamps SACOT feeder for short parts Spindles with brakes A set of planing heads Complete technical documentation CE Certified
used
Leadermac 823 Hypermac four-sided planer Working width 230mm Working height 160mm Number of spindles: 8 Spindle system: 1.Bottom 7.5kw 2.Right 7.5kw 3.Left7.5kw 4.Top7.5kw 5.Right 7.5kw 6.Left7.5kw 7.Top11kw 8.Bottom 11kw Feed speed 50m/min Pulling rollers in the table Upper and lower spindles with supports Pneumatic clamps
used
SCM Superset XL four-sided planer Working width 230mm Working height 130mm Number of spindles: 7 Spindle system Bottom 9kw Rights 9kw Left 9kw Mountain 9kw Bottom 9kw Rights 7.2kw Left 7.2kw Spindles adjustable in two planes Spindle diameter 40mm Feed speed adjustable on the inverter Drive on cardan shafts Pneumatic clamps
used
Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Side door -Dimensions: 1980/635/H40 mm -Weight: 26 kg
used
Side milling cutter, saw blade, milling cutter -various: manufacturers -various diameters: Ø 45 mm - Ø 90 mm width 1 mm - 8 mm -Type: HSS -Sale: only complete -Weight: 8 kg