planer 4 side used for sale

Centerless grinding machine, ROSSI MONZA 410 Monzesi, Grinding wheel width 200mm Grinding wheel diameter 400 pneumatic compensation, auto plunge, overhaul - retrofit - PLC under power in our warehouse in Gussago BS (Italy) Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylinders, tapered rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, grinding wheels and setting discs have a negative workpiece profile to work which is given to them with the aid of a tool. Centerless through-feed grinding or through-feed grinding and longitudinal grinding: workpieces to be machined proceed continuously with axial feed through the grinding gap., Grinding wheel  ...

Two drying and heating ovens Binder for laboratory use are available. 1) Binder ED 400, usable volume: 400L, internal dimensions X/Y/Z: 1000mm/800mm/520mm, levels: 2, max. load per level: 35kg, max. total load: 90kg, recommended wall clearance rear/side: 160mm/100mm, max. temperature variation: +/-3K, max. temperature: 300°C, power: 3.4kW, machine dimensions X/Y/Z: approx. 1250mm/1050mm/800mm, weight: approx. 125kg. 2) Binder KBF 115, usable volume: 100L, max. temperature: 100°C, power: 1.7kW. Documentation available. An on-site inspection is possible.

Knapp transfer roller conveyor Toothed belt slider 90° 750-485-425 RA1887 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 750 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic end stop and pneumatic lifting of the transfer belt Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 750 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW:  ...

DMG MORI NEF 400 CNC turning center was built in 2009 in Poland by FAMOT Pleszew S.A. The machine, distinguished by its compact design and high efficiency, is used for precision machining of workpieces with a maximum diameter of 350 mm. The machining process is performed inside a fully illuminated workspace by means of a high-speed spindle and precision cutting tools taken from a 12-position turret. The extremely rigid design eliminates any vibration and oscillation, ensuring maximum process stability during even the most intense challenges. All these features make the DMG NEF 400 the best choice for any industrial plant. The GILDEMEISTER NEF 400 CNC lathe was used for prototyping and worked for a total of 6492 hours. The offer also includes extensive equipment, consisting of, among others, an advanced HEIDENHAIN CNC control, driven tools and a chip conveyor. Technical specificatio ...

Manufacturing year : 1992/93 BAR: 1500 KW: 450 RPM: 305 l/min: 150

Milling center with 8 tool changer. Functional areas are still being built. Comes from research facility and is relatively little used.

steam turbine RATED POWER 1824 KW SPEED 8490 1/min pressure 19,5 bar abs exhaust pressure 0,56 bar

Key data: 650 mm, 1500 mm

Manufacturer : Okuma Multus U 4000 1 SC 1500 Big Bore Control : OSP P 300 S with 3D-M-E kit; IGF Advance M-E kit Year of construction : 07/ 2014 Switch-on hours : approx. 19500 h Spindle hours : approx. 12500 h Availability : direct from location Specifications Turning Ø over bed: 650 mm Distance between tips: 1,500 mm Maximum turning diameter: Ø 650 mm Maximum rotatable length: 1,500 mm Rod passage (main spindle): Ø 112 mm ( Pull tube 90 mm ) Spindle Nose (Type): JIS A2-11 Spindle speed: 45 - 3000 rpm Motor: 30/22 kW (30 min/cont) Max. torque : 955 Nm X-axis: 695 mm Z-axis: 1,600 mm Y-axis: 300 [± 150] mm B-axis: -30° to +210° (0.001° ) as full NC axis C-axis: 360° (0.0001° increment) Milling spindle: Tool holder : Capto C 6 Number of tools: 80 positions Spindle speed: 50 - 12,000 rpm Engine: 22/11 kW Dimensions and weights: F ...

Used INTAMSYS FUNMAT PRO 410 – high-performance 3D printer for engineering plastics, Industrial quality at an attractive used price, For sale is a used INTAMSYS FUNMAT PRO 410, an industrial high-temperature 3D printer for additive manufacturing with sophisticated technical materials such as PEEK, ULTEM™, PPSU, PC, PA, ABS and many more., The printer is fully functional, has been regularly serviced, and is in very good condition. Ideal for use in the Aerospace, automotive, medical technology, research and development,, ---------------------------------------------------------------, Highlights of the FUNMAT PRO 410:, - Dual extrusion system: Two nozzles for complex geometries, support materials and multi-material printing., - High temperature pressure: Nozzle temperature up to 500°C – perfect for high-performance thermoplastics., - Large installation space: 305 × 305 ...

Supply air system Al-ko, Alko Therm AT4 41x32 Bj. 2016 2 pieces For sale now. Fully functional.

Brand: CLECO Series: MPRO400GC Voltage: 230 V AC Frequency: 50/60 Hz Rated current: 2 A Power: Typical 250 VA Degree of protection: IP42

A vacuum mixer/homogenizer Olsa for the cosmetics industry is available. Usable volume: 400L, total volume: 470L, vessel diameter: 850mm, vessel height: 730mm, discharge valve diameter: 30mm, inlet nozzle diameter: 25mm, speed: 30rpm, material inside/outside: AISI316/AISI304. Documentation available. An on-site inspection is possible.

Manufacturer: Messer Griesheim Model: Lasermat 4200 Year of Manufacture: 2011 Type of Machine: Laser Cutting Machine Find more here - / Contact us at -

x-travel: 400 mm y-travel: 375 mm z-travel: 250 mm table-size: 205 x 800 mm T-slots: 4 x 45 14 H7 speeds: 50 - 3150 U/min tool taper: 40 ISO quill stroke: 50,0 mm Feeds X + Z Axis: 5.0 - 1000 mm/min Feeds Y Axis: 5.0 - 670 mm/min rapid traverse: 2.4 / 1.6 m/min control: Heidenhain total power requirement: 5.1 kW weight: 950 kg range L-W-H: 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition () Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN TNC 135 positioning/path control 3-axis manual data input control Programmable by the machine operator Convenient and easy operation - Electric motor-driven feed rates in all axes (X/Z/Y) X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min - Tiltable milling head to both sides - Tiltable T-slot universal table - Vertical c ...

Reference Num.: 4209 Brand: MBO Type: T 460 Available: directly Status: Not in production Location: Deutschland Equipment: - Kreuzbruch

H&C Fours 400°C 1000 x 1100 x 1000 mm Max temperature: 400°C

H&C Fours 400°C 1000 x 1100 x 1000 mm

GILDEMEISTER CTX 400E CNC turning center was built in 2000 in Germany by GILDEMEISTER Drehmaschinen GmbH. The machine, designed for machining workpieces with a maximum diameter of 570 mm, is distinguished by its high precision and reliability. The large working area is equipped with a 12-position turret and a spindle, whose high-powered motor allows all modern cutting tools to be fully utilised. The CTX 400E CNC lathe weighs approximately 5300 kg. Technical specifications of the GILDEMEISTER CTX 400E metal lathe - maximum turning diameter: 440 mm - maximum turning diameter over bed: 570 mm - maximum turning diameter over slide: 420 mm - maximum turning length: 635 mm - distance between centers: 700 mm - feed in the X/Z axis: 220/635 mm - maximum spindle rotational speed: 5000 rpm - spindle bore diameter: 79 mm - spindle drive power: 21 kW - 12-position turret - number of ro ...

Working width: 410 mm Length of the planing table: 1450 mm Number of knives: 4 St. Motor output: 4 kW Dimensions (L/W/H): 2650x850x1100 mm weight of the machine ca.: 750 kg Surface planer F 410 N ----------------------------- Technical manufacturers description: Planing width: 410 mm Total table length: 2600 mm Table height: 855 mm Feed table length: 1450 mm Aluminum planing fence swivels up to 45° Planing fence dimensions: 1100 x 170 mm 4-knife planing shaft diameter: 120 mm Knife shaft speed: 5000 rpm Motor power: 4 kW TERSA monobloc one-way reversible cutterhead SCM dressing protection device integrated in machine stand 120 mm diameter extraction nozzle Manual star-delta switch Motor protection switch, undervoltage release Lockable main switch Automatic motor brake Pivoting auxiliary fence ----------------------------- Price of the above machine on request! -------------------------- ...

Manufacturer: Behringer Model: HBP 420-723 G Year of Manufacture: 2004 Operating hours : approx. 15,800 hours Including powered roller conveyor Silberland B 660 / 15 m (built in 2010) Rated Voltage: 400 V Frequency: 50 Hz Rated Current: 20 A Control Voltage: 24 V DC Technical Data Working Range: - Round at 90°: Ø 420 mm - Flat at 90°: 720 × 420 mm - Flat at 75° left: 710 × 420 mm - Flat at 60° left: 650 × 420 mm - Flat at 45° left: 550 × 420 mm - Flat at 30° left: 350 × 420 mm - Flat at 60° right: 650 × 420 mm - Flat at 45° right: 460 × 420 mm Smallest Cut-off Length (90°): - Manual: 10 mm Cutting Speed: - 17 – 120 m/min (stepless adjustment) Saw Blade Dimensions: - 6300 × 41 × 1.3 mm Band Tension (hydraulic): - 950–1200 N/mm² Motors: - Saw Drive Motor: 5.5 kW - Hydraulic Motor: 1.5 kW - Coolant Pump: 0.12 kW - Chip Conveyor: 0.5 kW Electrica ...

Manufacturer: BEHRINGER Model: HBP 410-723 G Year of Manufacture: 2014 Operating time: approx. 5,900 hours With automatic supply and removal Electrical Data: - Rated Voltage: 400 V - Frequency: 50 Hz - Rated Current: 36 A - Control Voltage: 24 V DC Saw Band Dimensions: - 6,300 x 41 x 1.3 mm Technical Data: - Working Range Ø / flat at 90°: 410 mm / 700 x 400 mm - Working Range Ø / flat at 75° left: 410 mm / 660 x 400 mm - Working Range Ø / flat at 60° left: 410 mm / 580 x 400 mm - Working Range Ø / flat at 45° left: 410 mm / 450 x 400 mm - Working Range Ø / flat at 30° left: 300 mm / 300 x 300 mm - Working Range Ø / flat at 75° right: 410 mm / 660 x 400 mm - Working Range Ø / flat at 60° right: 410 mm / 580 x 400 mm - Working Range Ø / flat at 45° right: 380 mm / 450 x 380 mm Minimum Residual Piece Length: 45 mm Cutting Speed: 20 – 140 m/min Feed Pressure (B ...

Key data: 1186 KW, 400 V

Jenbacher 416 Biogas CHP Generating Set Engine overhauled in Aug 2022 at 62.850 hrs. Model - Jenbacher 416 Hrs - 86,600 Year - 2014 Fuel - Biogas Capacity - 1186 kW HZ: 50 V: 400 Scope of supply: Engine, Alternator, Base Frame, Control Panel (Dia.Ne XT3) Gasline, Exhaust Gas Heat Exchanger, Water Plate heat Exchanger, Exhaust cooler, Ventilators, Piping and Cabling. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Compact 4001.20Ptk Year of Make: 2019 CNC control Working area: 2 x 4 m Plasma rotator "MasterCut" with fully automatic support for weld seam preparation 1 plasma torch with power source Kjellberg HiFocus 280i TEKA filter system

Presse à injecter ARBURG 100 T type 420C 1000-250 Année de fabrication : 1999 En bon état de fonctionnement Pompe neuve Force de fermeture : 1000 KN / 100 T Diamètre vis : 40 mm Volume injectable : 188 cm3 Pression d’injection : 1530 bars Rapport L/D : 18 Ouverture max des plateaux : 750 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 570 x 570 mm Entre colonnes : 420 x 420 mm Dimensions : 4,15 x 1,60 x 2,02 m

Treif Discus Circular Knife Machine Type: Discus 400 digital control Circular knife Cutting width adjustable from 4mm to 18mm 400V 50Hz Stainless steel cladding Weight approx. 200 kg Operating voltage 400 volts Control voltage 24V/DC V AC Nominal power 0.9 kW Circular knife with Teflon coating Height: 110cm Width: 80cm Depth: 70cm

Lippert belt conveyor riser with arch GF 7630-550-400 RA1626 Technical data: Conveying length (NL): 7630 mm (riser 4000mm + bow 3630 mm) Frame width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): 0.3 Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum: Ø = 64 mm Deflection roller: Ø = 34 mm Belt type: HSL 8 E year of construction: 2001 Optionally available: Supports Side guide one and both sides feed belt/lead belt frequency converter for stepless speedcontroll Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 7630 ( 4000 + 3630 ) Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor spe ...

Lippert belt conveyor GF 7535-550-400 RA1624 Technical data: Conveying length (NL): 7535 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 7535 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individual ...

Lippert belt conveyor GF 2655-550-400 RA1675 Technical data: Conveying length (NL): 2655 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 2655 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individual ...

Lippert belt conveyor GF 2855-550-400 RA1649 Technical data: Conveying length (NL): 2855 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 2855 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individual ...

Lippert belt conveyor GF 3110-550-400 RA1646 Technical data: Conveying length (NL): 3380 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 3380 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individual ...

Lippert belt conveyor GF 3220-550-400 RA1669 Technical data: Conveying length (NL): 3220mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.5 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: 0,5 scope of delivery: without supports and side guides For individual, professional advice, simply co ...

Lippert belt conveyor GF 5235-550-400 RA1607 Technical data: Conveying length (NL): 5235 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 5235 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individual ...

SOMIC 424 T2 tray/cover packer for collecting, grouping and packing blister strips, product dimensions min. 30 x 50 x 5 mm (LxWxH), max. 400 x 200 x 250 mm (LxWxH), collection capacity up to 600 products per minute, output up to 40 packaging units (trays + cover) per minute, Robatech Concept hot melt adhesive melter, outfeed conveyor with reject ejection, electrics 3x400V/3Ph/50Hz, connected load 14 KVA, compressed air 6-7 bar, air consumption max. 850 Nl/min., max. flow rate 1600 Nl/min., machine footprint approx. 3800 x 3200 mm (LxW), machine net weight approx. 2300 kg

CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production., Accessories:, Total enclosure, Software path management, Filter system with chiller for dielectric fluid, Automatic fire extinguishing system DIN 14497, Standard programs for measuring, eroding etc., Program for chamfering of workpiece cutting edges,, Automatic Diagnosis program for machine operational status with text output on screen, Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine,, 6 sided erosion wheel changer,, Workhead SK 50 with adapter to 12 HSK 63 A,, Turntable workpiece magazine for 12 workpieces SK 50,, Turntable workpiece magazine for 4 workpieces SK 50,, 6 flush sets, QXD250 CAD/CAM for external PC workstation ...

Used dough divider RHEON, type: Twin DIvider 400 VX 202 Dough-friendly division from roe dough to Italian ciabatta. The dough is divided by weight and not volume, which means that there is no pressure on the dough and the gluten is preserved. - 1 or 2 rows - RHEON Gravimetric control - Capacity: 800 kg/h - Initial width: 130-150 mm - Weight range 1 row: 150 - 1,200 g - Weight range 2 rows: 75 - 600 g - Condition: Good, ready to use Visits and test runs are possible by arrangement.

max. wheel diameter: 420 mm gear width: 120 mm max. module: 8 min. module: 0,5 control: BWO 783 no. of strokes: 32 - 800 Hub/min stroke: 0-137 mm table diameter: 400 mm table bore diameter: 125 mm total power requirement: 50 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 5,3 x 3,9 x 3,5 m CNC control Heckler und Koch BWO 783 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rühle Frozen Meat Slicer Type GFR 450 / 250 CW 5.5 Cross cutter 4 pieces

Brown & Sharp 600 x 400 mm

Max. saw blade diameter: 400 mm Pneumatic material tensioner Manual feed

Engel Screw Barrel Bimetal, new and unused 105 mm diameter LD 22 4550 Unit: 3380 cm3 5550 Unit: 3700 cm3

Key data: 4000 , 1464 , 80

Screw diameter: 80 mm Injectable volume: 1678 cm3 Injectable weight: 1464 g Injection pressure: 1856 bar Column passage: 800 x 800 mm Opening stroke: 1020 mm

A bar loading magazine FMB for long turning automatics is offered. Bar diameter (min./max.): 2mm-23mm, max. bar length: 4200mm, max. remnant length: 420mm, loading compartment length/magazine length: 235mm, compressed air connection: 0.6MPa (6bar). An on-site inspection is possible by appointment.

Stock number: 4001 PROCESSING Manufacturer: MAZAK, Type: VCN 410A-II Year of Make: 2009 Specifications: Table size 900 x 410 mm Longitudinal movement (X) 560 mm Transverse movement (Y) 410 mm Vertical movement (Z) 510 mm CAT 40 spindle cone Infinitely variable spindle speeds 12000 rpm Spindle motor 11/7.5 Kw Tool changer 30 places Control Mazak Matrix Fabr. Controlled in axes 3 Operating hours spindle 7746 hours Accessories: Cooling by spindle 15 bar Chip conveyance. Tool Measuring Length: 2600 mm, Height: 2800 mm, Width: 2000 mm, Weight: 5010 KG

Sawblade tiltable: 0 - 45 ° Length of the rolling table: 3.200/3350 mm cutting width: 1.100 mm Motor output: 5,5 kW Cutting height: 155 mm Cutting height at 45°: 110 mm Saw blade diameter: 450 mm Speed: 3.000/3.600/4.200 U/min. Dust suction hood: 1x120 , 1x80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Arburg 420 C 1000-250 (2000) Clamping force : 100 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 100 g Working hours : 134.000 h

Arburg 270 C 400-100 (2000) Clamping force: 40 t Screw diameter : 20 mm Distance between tie bars : 270 x 269 mm Shot weight : 25 g Type : horizontal Drive : hydraulic Hours : 138000 h

approx. 10 pieces spring floor trolley, Zarges, 195 L – used - : Price per unit: 495.-€ (net), ex location! Minimum order 5 pieces! Manufacturer: Zarges Type: 40645, Suspension Floor Trolley W 161 Year of manufacture: unknown With push bar Item no. Inner Length (approx. mm) Inner width (approx. mm) Inner height (approx. mm) Outer Length (approx. mm) Outer width (approx. mm) Outer height (approx. mm) Set for payload (kg) Volume (liters) Weight (kg) 40645 1010 420 460 1060 470 800 30 195 21,0 equipped with 4 swivel castors in corner arrangement. Original price: approx. 1.500.-€ Condition: good Available: immediately Location: Attenweiler

x-travel: 4100 mm y-travel: 3500 mm z-travel: 1100 mm distance between columns: 2700 mm distance table - lower edge spindle: 200 - 1300 mm table-size: 4000 x 2100 mm table load: 17 t spindle motor: 37 / 45 kW spindle turning speed range: 10000 (Built-in driven) U/min tool taper: BT 50 feed in x - axis: 10 mm/min feed in y - axis: 10 mm/min feed range Z-direction: 10 mm/min control: Fanuc 0i-MF total power requirement: 56 kVA weight of the machine ca.: 47,5 t dimensions of the machine ca.: 10,8 x 7,8 x 5,75 m Portal milling machine (5-sided machining) equipped with: - Fanuc 0i-MF CNC control - 60-position tool changer (BT 50) - Auto head Storage: -- 90° angle milling head (4500 rpm, 25kW) -- Universal milling head with automatic 5° indexing (25 kW, 3500 rpm) - 4th axis as NC rotary table (dia. 1000 mm, 4.9 t) - Coolant (extranal) - Oil separator - Spindle oil cooling - Chip conveyor T ...

Bread slicer Treif Primus 400 Treif Primus 400 "The Premium Model" Circular Knife Machine Stainless steel version Knives newly sharpened and coated Best cut for your bread Operation via easy one rotary control Disc thickness adjustable from 4 - 24 mm Dimensions: 800 x 700 x 1050 mm, WxDxH Robust technology Connection 230V, ready to plug in Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience!

Mobile proofer 4060 NEW Simple proofer/warming oven Model: Gärmobil 4060 longitudinal Thermal double glass door with soft closed LED easy control with timer Temperature adjustable from 30 to 90°C Humidity adjustable from 60 to 95% Capacity: 20 trays 400x600 mm longitudinal Connection 230 V New device & SAB tested with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience!