planer 4 side used for sale

Key data: 320 KW, 400 kVA, 400 V

Make Iveco - AEM Model: 400 kVa diesel generator set Year of manufacturing: 1997 Serial nr: 12-8040-0001 Working hours (on servicemeter): 39 Capacity (KvA) 400 Capacity (Kw) 320 Engine make Iveco Engine model 8281-SRI-26SE Fuel Diesel Alternator make AEM Alternator model SE 315 L4 Voltage 400 Frequency (Hz) 50 Rpm 1500 Amperes (A) 577 Dimensions LxWxH (mm) 3250 x 1500 x 2100 ( set ) Weight (Kg) ca 3400 Total quantity in stock 1 Country of origin Set assembled in Germany Comments Used but almost new condition with 39 hours only, complete with panel and 2000 ltr fuel Bowser

Key data: 400 KW, 570 kVA, 400 V

Dear Ladies and Gentlemen, We hereby offer the following a MAN CHP in a container for rent! Year of construction 2014 Starts: 757 Hours: 11448 BH. Electrical Power: 400KW Thermal power 445 KW Dimensioning: Thickness: 100/140 mm insulation Length: 10000 mm Width: 2800 mm Height: 3200 mm Paintwork: Moss Green Contents in the container: MAN gas engine with generator on substructure Central heating Heat exchanger Switchboard Gas control unit Static power supply Exhaust silencer inside Auxiliary silencer above the container Insertion loss 65dBA in 10m Data recording Gas blower Combimac blue 65mbar gas pressure Gas Flow Meter Gas vacuum monitor Return temperature increase Exhaust gas heat exchanger with bypass Gas warning system Wind Vane Guardian Flame detector 1000 l each of used and fresh oil tanks with pump and hose reel Intrigued  ...

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet without shelves -Width: 950 mm -Depth: 420 mm -Height: 2150 mm -Door: lockable, without key -Weight: 50.5 kg

Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: Tecna, Spot welding machine: Type 4161 -Rated power: 31 kVA -Operation: via foot pedal -Dimensions: 780/250/H1500 mm -Weight: approx. 130 kg

Robot Laser Welding and Cutting Cell / Laser cutting and welding cell Year of manufacture 2018 Wenige Arbeitsstunden / not many working hours Robot Fanuc M-710iC/70 Control CNC: Fanuc R-30iB) + MFP Payload / lifting max: 70 kg Repeatability: ± 0.04 mm Working range: 2050 mm IP54 Fiberlaser source: IPG Photonics Model YLS-4000-S2T-Y16 Power: 4kW Cooling system. Two outputs optical and permanent connections of welding and welding Laser Cutting Heads / Two outputs optical and permanent connections of welding and laser cutting heads. Source dimensions: 856 x 806 x 1206 mm; Weight / weight: 330 kg; Power supply: 400–460 V/3P + PE at 50–60 Hz; Operating current at: 4000 W and 400 VAC: 20 A Laserschneidekopf / laser cutting head: HIGHYAG BIMO-FSC Laserschweißkopf / laser welding head: IPG Photonics. FLWO-D30 Vertical Welding: Fronius 7000 Doppe ...

Centrifuge for lateral feeding of an extruder with flakes / scrap the centrifuge is equipped with a loading tank previous use was on a 100 mm extruder with a conveying capacity of approx. 330 kg for PET flakes at call

Stainless steel, round steel, warehouse liquidation, 1.4104, X14CrMoS17, D150x1057mm, , new -50% Special price This stainless steel comes from a stock liquidation of a certified production company, so we offer an absolute special price. We have other diameters with this quality in stock. Buy a larger quantity we will still accommodate you in price. D 150mm x 1057mm lg, 147 kg, peeled. Material: X14CrMoS17 Material number: 1.4104 Condition: peeled The material was analysed using a hand-held spectrometer and is available from us. Material certificate is not available. A heat-treatable, martensitic, stainless free-cutting steel with 17 % chromium and molybdenum addition, which is alloyed with sulphur to improve machinability. The higher sulphur content reduces corrosion resistance and toughness. Not for cold forming and joint welding. 6 month warranty according to our gen ...

Height 2100 mm Width 1300 mm Length 3000 mm Capacity 450 l Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Stirrer Type Z Type Agitators Product ejection Ejection via hydraulic tilting of the mixer bowl Loading Loading integrated into the machine Mixer Type Open Mixer Number of rollers Twin shaft

MACC Metal Band Saw Special 411 CSO Aut. Lowering Section cap. round up to 300 mm 2 speeds 38 + 77 m/min. Motor 1.6 kW, 400 V incl. machine base Weight approx. 530 kg

Press force max.:: 1600 kN heating plates:: 400 x 400 mm electrically heated:: -- °C heating power:: 9,92 kW piston stroke:: 400 mm no. of stages:: 1 Condition: Used, Specification: Press 400 x 400 mm, second-hand steel frame construction - Clamping force: 160 tonnes - pressure force: 1600 kN - Operating pressure: 300 bar - Closing: from bottom to top - Heating platens: 2 electric platens - Heating power: 4.96 kW/platen - Heating platen dimensions: 400 x 400 mm - Specific pressing pressure: 1000 N/cm² - Distance between the heating platens: 500 mm - Piston stroke: 400 mm - Piston diameter: 260 mm - AC motor power: 7.5 kW - Pneumatic protective cover in the front area, - lifting device - Sliding table - Approx. dimensions: 1,760 x 1,150 mm - System height approx.: 2,470 mm - Weight approx.: kg The data for this ad was cr ...

2 x 0.6V per revolution per min. I max. 2 x 0.09A V max. 10000 revolutions per min.

Key data: 4050 mm, 10 mm, 1000 mm

brand new, with control SC100T Specifications: max. cutting length 4050 mm max. sheet thickness for ST 45 10 mm Cutting angle 0.5 - 3° degrees Cutting gap adjustment 0.05 - 1 mm Hold-down 23 Back gauge area 1000 mm Stroke rate 7 - 11 strokes Length of the angle stop 1000 mm Weight approx. 13,000 kg Standard equipment: - SC 100T control - Cutting length limitation - Motorized back gauge 1,000 mm - Electronic cutting gap adjustment - Cutting line lighting with wire - Electro-hydraulic cutting angle adjustment via 2 push buttons or CNC - Angle stop 1,000 mm with scale, T-slot and fold-down cam - Scissor table with square supports and roller support - Mobile foot pedal for easy and safe handling - Hydraulic and mechanical overload protection - Finger guard made of round steels with recessed grip - Light barriers and protective fences - Machine according to CE  ...

Distance between points: 760 mm, Max travel Z axis: 650 mm, Maximum length to be rectified: 430 mm, Ø max to be rectified: 250 mm, Height of points: 125 mm, Ø max. molar: 500 mm, Max travel X axis: 320 mm, cnc brand: FANUC, cnc model: 18i-T, Ø max. wheel: 400 mm, main motor power: 7.5 Kw, Z and X axis resolution: 0.1µmm, Distance between centers: 430 mm, Workpiece head cone: MORSE 5, Ø of the workpiece head hole: 38 mm, tailstock cone: MORSE 4, Accessories: FELSOMAT gantry loader with SIEMENS CNC; Refrigeration equipment with paper filter; Forkardt automatic mooring plate; automatic tailstock; Cooled grinding wheel shaft; Spare ball screw; MARPOSS Automatic Grinding Wheel Balancer and Gauge , Dimensions (length x width): 2500x2000 mm, Weight: 4700 Kg

Rotary table, rotary dividing table, dividing attachment, dividing head -Manufacturer: Walter, rotary table type Rts 400 G -Clamping surface: Ø 400 mm -Center bore: Ø 31 mm -Groove width: 14 mm -Dimensions: 700/510/H260 mm -Weight: 294 kg

Specifications Maximum pressure: 6 tons Press force: 2.5 kg/cm² Bale size: 600x400x500 mm Bale weight: approx. 50 kg Power connection: 400V / 2.2 kW Year of Make: 1995 Productivity: approx. 3 bales/hour Shredder Cutting width: 5.8 mm Power connection: 380 V/ 4 kW Year of Make: 1994 Safety level: DIN 66399-1, 5.2 P-3 /O-2/T-2/E-2/

Control Manual Plus Turning diameter 260 mm Circumferential diameter 475 mm Center width 1000 mm Turning length 880 mm Spindle speed 3,000 min-1 4-fold parachute holder Tailstock

Radial Drilling GSP 49S22 Spindle: Ø 125 mm Cone: CM6 Spindle exit: 600 mm Spindle speed: from 17 to 1050 RPM Arm travel: 1800 mm Maxi height column travel: 1800 mm Column diameter: Ø 600 mm Total column height: 3000 mm Spindle speed: 11 kW Drilling/tapping function Mechanical locking of the column Hydraulic locking of the trolley Auto descent Delivered with one cube Cube dimensions: L 800 x W 560 x H 600 mm Table size: L 3300 x W 1400 x H 320 mm Voltage: 380 V Weight: 12 T

Bench grinder, bench grinder, pedestal grinder, pedestal grinder -Manufacturer: Cordia, double bench grinder type DOS 400 -Motor power: 2.2 kW -Speed: 1400 rpm -Grinding discs: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 720/520/H1210 mm -Weight: 207 kg

Output infinitely variable up to 70 packs / min. with self-cleaning vacuum filter with automatic bag magazine with integrated clipping device with date printer completely stainless steel clad with TOUCH control

faceplate diameter: 400 mm total power requirement: kW weight of the machine ca.: 0,08 t dimensions of the machine ca.: m 1 pc. faceplate - diameter 400 mm bore 125 mm fastening 4 screws: 185 M 10 KK 160 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic container, hydraulic tank, aluminum container for hydraulic pump, hydraulic unit -Hydraulic tank: Universal tank made of aluminum, unused -Tank capacity: approx. 230 l -Connections: see photos -Dimensions: 565/485/H1215 mm -Weight: 40 kg

Control relay, control relay extension, relay output, compact control -Manufacturer: Eaton, control relay compact control -Type: easy 412-DC-R -Number: 1x relay available -Price per piece -Dimension: 90/70/60mm -Weight: 0.2 kg/pc.

faceplate diameter: 440 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. faceplate - diameter 440 mm bore 60 mm fastening: 4 pcs. screws dia. 173 mm / M 16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: MIG/MAG welding machine Type PowerMAG MM 4200 W complies with the EU Eco-Design Regulation No 2019/1784 Connection voltage 3 x 400 volts Adjustment range 40 – 420 amps Duty cycle 60% ED at 420 amps 80% ED at 360 amps 100% ED at 325 amps Current setting 21 switching levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 32 Amps Dimensions L x W x H 900 x 400 x 650 mm Weight 110 kg Age 3 months Condition workshop tested, like new, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire 1 can of non-stick spray 1 Piece Instruction Manual Warranty 24 months from the date of delivery List fa ...

Tandem cargo bike, load rollers, heavy-duty rollers, heavy-duty wheel, tires, solid rubber tires -Heavy-duty wheel: Double solid rubber tire -Tire type: 415/75-305 -Receipt: Ø 90 x 58 mm -Bolt circle: Ø 220 mm -Dimensions: Ø 415 x 215 mm Quantity: 1 piece available -Weight: 49 kg

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Pipe grab: unfortunately without type designation -Pipe diameter: approx. 400 to 750 mm, see photos -Dimension: 930/470/H1140 mm -Own weight: 124 kg

FOSHAN LX-425 metal circular sawing machine was built in 2019 by the Chinese company Foshan Nanhai Longxin Machinery Co., Ltd. The machine designed for precision cutting of workpieces at a fixed angle of 90° performs the machining process (from loading to the workpiece cutting itself) fully automatically, thanks to the provision of a bar feeder with magazine. The machined workpieces have a smooth surface without any burrs or distortions. In addition, the ability to cut more than one piece of material (bundle) makes the FOSHAN sawing machine an excellent choice for mass production. To this date, the FOSHAN LX 425 circular sawing machine has cut bundles of 4 brass tube profiles into suitable lengths. Technical specifications of the FOSHAN LX-425 tube cutting machine - cutting angle: 90° - cutting disc diameter: 300 mm - cutting disc bore: 32 mm - cutting disc rotational speed: 42- ...

MACC Aluminium Circular Saw TA 400 TCT circular saw blade 400 mm Section cap. up to 140 mm round Coolant pump Attack Speed 3000 rpm Motor 2.2 kW, 400 V incl. machine base Weight approx. 160 kg

PLC control, digital output, digital output, relay output -Manufacturer: Siemens, Simatic S5 digital output 2 pieces -Type: 6ES5 441-8MA11 -Bus module: Siemens 6ES5 700-8MA11 -Number: 6x double module available -Price: per piece -Dimensions: 160/90/H125 mm -Weight: 0.7 kg/piece

PLC control, digital output, digital output, relay output, relay output -Manufacturer: Siemens, Simatic S5 digital output 2 pieces -Type: 6ES5 441-8MA12 -Number: 4x double module available -Price per piece -Dimensions: 160/90/H125 mm -Weight: 0.7 kg/pc

Frequency converter, frequency inverter, drive converter, controller, variable speed drive -Input: 3x 380..500 V~ -10% 6% 50/60 HZ -Output: 3x (0-220/240) V~ 0..180 Hz 9.5A~ 400V -Dimensions: 100/340/H270mm -Weight: 4.7kg

Manufacturer: Ruhle Type: Frozen block cutter Model: GFR 450 Infeed dimensions: 450 mm x 330 mm Knife width: 450 mm Total dimensions: 1700 mm x 700 mm x 1450 mm Voltage: 400 V, 3 Ph, 50 Hz Power: 5.5 kW, 16 A

Used High Quality Bystronic pressbrake 6-axis for a sale.

Key data: 1011 , 400

Fast delivery! Gasgenerator Natural gas or Biogas Brand; Siemens Type; SGE-42HM Power; 1,011kWe RPM; 1500RMP Voltage; 400V Frabrication year; 2020 Guascor, Siemens, CHP, Gasgenerator, Biogas, Syngas, Jenbacher, MWM, MTU, Spareparts

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: EPA, Contactor -Type: NF-S-412451 -Number: 2x contactors available -Price: per piece -Dimensions: 90/35/H60 mm -Weight: 0.2 kg/piece

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Nord, geared motor with brake -Type: SK 530SU-80S/4BRE8 -Speed: 93 rpm -Power: 0.55 kW / 1380 rpm -Shaft: Ø 25 x 45 mm -Protection class: IP54 -Brake: 8 Nm -Dimensions: 435/200/H240 mm -Weight: 21 kg

Cutting width: 430 mm Cutting speed: 24 m/min Maximum throughput height: 90 mm Blade gap: 0 - 5 mm Apply length on infeed conveyor: 400 mm Infeed conveyor: 850 x 425 mm Discharge conveyor: 650 x 425 mm Overall dimension W x H x D (with/without discharge conveyor): 800 x 1190 x 1660 / 1210 mm Weight (with/without discharge conveyor): 225 / 210 kg Motor performance: 0.75 kW Electrical connection: 3 AC - 400 V - 50 Hz, 16 A Compressed air: not required

T-slot plate, clamping plate with dovetail slots, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Opening: 150 x 100 mm -Groove width: 18 mm -Hole spacing: 200 x 250 mm, Ø 14 mm -Dimensions: 480/350/H60 mm -Weight: 66 kg

Central processing unit, control, switchgear, CPU, SPS, SPS control -Manufacturer: Mitsubishi, SPS control from tray sealing machine Inauen VC999/ TS 1200 N -Type: FX2n-48MR-DS -Total dimensions: 295/90/H83 mm -Weight: 1.3 kg

Manufacturer: Multivac Type: Vacuum machine Model: C 400 Chamber depth: 470 mm Chamber height: 170 mm or 250 mm Sealbar configurations: front 650 mm + right 450 mm left 520 mm + right 520 mm left 520 mm + right 520 mm + front 520 mm front 700 mm Voltage: 3 x 400 V 50 Hz Incorporated vacuum pump: 100 or 140 m3/h Main material: Stainlees Steel Machine weight: 250 kg

Plastic crates, pizza parlors/bun trays, plastic box, plastic crate used Insert without cloth Size 60x40 H4cm, Color: white, Finish bottom to and sides with holes 6,250 Units in Stock - Bakery condition not cleaned

Aerre CL 4080 vertical machining centre :::TECHNICAL SPECIFICATIONS::: CNC Model: ECS Tool Attachment: ISO 40 Spindle power: 5.5Kw Number of spindle speeds: 6000 Number of tools: 20 X-axis travel: 800mm Y-axis travel: 400mm Z-axis travel: 500mm Table dimensions: 900 x 400mm Guides: flat :::D DIMENSIONS AND WEIGHT::: Length: 2900mm Width: 2300mm Height: 2850mm Weight: 4100Kg

Machine light, machine lamp, work area light, system light, compact light, control cabinet light -Manufacturer: Rittal, control cabinet light type PS 4112 -Voltage: 220 V 20 W -Number: 2 lights available -Price: per piece -Dimensions: 625/40/H100 mm -Weight: 2 kg/piece

Fieldbus, Profibus, PLC control, automation technology, controls and regulators, end module, fieldbus controller, PLC terminal, digital input terminal -Manufacturer: Wago, digital input terminal from Demag D 100-275 NC injection molding machine -Type: 750-400 -Dimensions: 70/15/H100 mm -Weight: 0.1 kg

Control machine, monitor, control tool master -Manufacturer: Wieder, Monitor Tool Master TM -Type: WPC-ES-486, (133-1.2-L-9.4-T) -Dimension: 300/160/H215 mm -Weight: 6.7 kg

Key data: 6 KW, 7 kVA, 400 V

Emergency power generator, power generator, Bauer GFS-6 ATS, unused, orig. packaging, never been in use! Continuous power of 6 kW / 7.4 kVA. LxWxH 1,070 mm x 745 mm x 815 mm Weight 180 kg Net weight. Easy operation and maintenance. Specifications: Max. power [kW/kVA/HP] 6.5 / 8 / 8.87 Continuous power [kW/kVA/HP] 6.0 / 7.4 / 8.15 Nominal voltage [V] 230 / 400V Frequency [Hz] 50 Speed [rpm] 3000 Power factor [cos f] 0.8 Tank capacity [L] 20 Housing colour RAL 3000 Running time approx. 8-10 hours per tank Operating noise: Sound pressure level LPA [7m] [db(A)] 75 Engine: Power 8 kW / 9.0 kVA / 10.8 hp 1 cyl. Diesel Fuel Type: Diesel Emission standard: none Number of cylinders 1 Starter Electric with Battery On-board voltage [V] 12V Battery voltage [Ah] 230 / 400V Cooling System Air Cooling Generator: Model 6.5 kW 3000 rpm Generator system Brushless, self- ...

Display, display module, display panel -Manufacturer: Regloplas, display panel type RT45-Geh -Art. No.: 45750 -Dimensions: 130/100/H100 mm -Weight: 0.9 kg

Punch power: 400 kN table surface area: ca. 1250 x 700 mm throat: 500 mm hole punching press: capacity (dia. x thick.): 100 x 3 mm hole punching press: capacity (dia. x thick.): 75 x 4 mm hole punching press: capacity (dia. x thick.): 30 x 10 mm x-travel: 700 mm y-travel: 470 mm total power requirement: 4 kVA weight of the machine ca.: 2 t dimensions of machine L x W x H: 1,50 x 1,72 x 2,00 m Accessories: tool cabinet with various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make: BITZER Type: 6H-35.2Y-40P Flow rate: 110.5 m³/h Speed: 1450 rpm Operating current: 61A incl. BITZER liquid collector Type: F1052T Year of Make: 2008 Volume: 105L Min/Max Temp.: -10°/120°C Max. permissible. Pressure: 33bar Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller -Manufacturer: AEG, thyristor power controller -Type: Thyro-A 1A 400-60 100A -Quantity: 2x power controllers available -Price per piece -Dimension: 175/85/H170 mm -Weight: 2.2 kg/pc.