planer 4 side used for sale

4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Gubisch Type 147 4-Side planer Planing width 180 mm Planing height 150 mm Feed stepless with 7 spindles of which a universal spindle with length dressing table Drive 34.6 kW with lots of tools, planing knives, etc. with planing heads and several groove and spring sets at least 4 planing heads, with chamfering knife and spacer discs

I sell the four-side planer Futura P-MAX 23/5+UNIV, built in 2008. 6 Spindle: bottom - right - left - top - bottom - universal Electronic programming for working width, working height and feed speed. Element max. 230x170mm ! All 6 spindles 6000 rpm. Material prints for short elements. Weight 2500kg. 1-zone pneumatic material pressure system for feed Fully operational. Available the same. Exhibition machine, has worked very little !

Four side planer Griggio G240 P/5U for wet Maximum planing width 240mm Maximum planing height 160mm Number of spindles 5 Spindle arrangement Bottom Rights Left Mountain Universal Drive: in the table Infinitely adjustable feed on the inverter Year 2007 Weight: 4060 CE Certificate Net price

Four-side planer with 4 planing heads •Powerful with 4 motors Hsvwvkytm Voltage 400 V / 3 / 50 Hz Motor power 17,1 kW finished workpiece width 180 mm min. finished workpiece width 25 mm finished workpiece thickness 105 mm min. finished workpiece thickness 10 mm min. length of the workpiece - for single feed 350 mm - at group feed 250 mm Number of working spindles 4 Spindle speed 6000 min-1 Spindle diameter 40 mm Cutterhead diameter 120 mm Length of horizontal spindles 190 mm Length of vertical spindles 120 mm Feed speed 6; 12 m/min Diameter of feed rollers 120 mm Length of feed table 1700 mm Distance of the feed table from the floor 920 mm Quick adjustment of the feed table and ruler 10 mm Weight 1000 kg

Four-side planer Weinig Unimat 23E cutting out the glazing bead - German production - year of production 2002 - total power 32 kW - pneumatic stroke of the spindles for cutting the glazing bead - 3866 mth TECHNICAL PARAMETERS: - planing width 230 mm - planing height 140 mm - spindle diameter 40 mm - electronic height and width adjustment - the possibility of programming fixed dimensions 1 lower spindle 4 kW 2 left spindle 3 right spindle 7.5 kW 4 right spindle 5.5 kW 5 top spindle 5.5 kW 6 lower spindle 4 kW - power of the feed motor 3 kW - feed speed 5-24 m/min - length of the pre-table 2480 mm - electric brakes - seven upper steel pulling rollers - one upper rubber pulling roller - one roller in the top pulling - air cushion in the countertop - pneumatic pressure - feed on cardan shafts - diameter of connections 140 mm TRANSPORT SIZE 470x220x240 cm  ...

Weinig Hydromat H22N four-side planer - German production -DTR - year of production 1992 - two rollers in the tabletop, milled before the first head - for wet wood TECHNICAL PARAMETERS: - planing width 220 mm - planing height 140 mm - Spindle diameter 50 mm 1 lower head 7.5 kW 2 legal head 7.5 kW 3 left head 11 kW 4 upper head 7.5 kW 5 lower head 11 kW hydraulic feed pump motor power 15 kW feed speed smoothly adjustable up to 60 m/min Feed on cardan shafts electric height adjustment pneumatic pressure five pulling rollers in the countertop eight steel upper pulling rollers One Upper Rubber Pulling Roller rests on horizontal spindles jointer on the lower spindles Transport dimensions 500x200x160 cm weight 4 tons

Horizontal side channel pump Materials: - Case: 1.4581 - Wheels: 1.4408 - Wave: 1.4571 Housing sealing: single-acting sliding ring seal, carbon/silicon carbide/viton Version A6: Pump mounted on base plate elastically coupled with 1.35 kW IEC standard rotary current motor Pressure: 2 bar Power: 800 l/h Revolutions: approx. 1,450 rpm Rated frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 Type of protection: E Ex eII T3 Type of construction: B3 Pumps partly unused, therefore in very good condition!

with 2 Fotzellen for autom. Umreifen, frame format 1000 H x 600 mms of B, roller race powered 55-cm height of the ground, 4 steel roles at the entrance 4 roles at the exit, for PP tape format 12x0,63-0,65 mmRollenkern 200 mms / 280 mmBand tensions 100-700 N380V, 50 hertz

Materials: Housing: 1.4581 Wheels: 1.4408 wave: 1.4571 Sealing: single-acting mechanical seal, carbon/silicon carbide/Viton Model A6: Pump on base plate mounted elastic coupled with 1.35 kW IEC standard motor, three-phase Pressure: 2 bar Revolutions: approx. 1,450 U/min Output: 1,200 l / h Mains frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 protection class: E ex eII T3 Design: B3 Pump partially unused in excellent condition!

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 870kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,495.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 100 with 2x3 each. Arms 1.20 m, 870 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 adjustable shelf arms each with centre of gravity 600 mm 870 kg per arm / 2610 kg per stalker with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors . Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 each. Arms 1.20 m, 500 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf armseached carrying capacity at load centre 600 mm 500 kg per arm / 2610 kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 4,16m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.850.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 4160mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per stem with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.750.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 3.50m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 750kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.900.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 3.50m high, hot-dip galvanized IPE 160 / 100 with 2x3 each. Arms 1.20 m, 750kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3-adjustable helving armseached each carrying ability at load centre of gravity 600 mm 750 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New

Collar shelving, double-sided, 5, 18 m high, 1, 20 m arms, 870 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR2.495.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided measures 5.18 m, hot-dip galvanized IPE 180 / 100 with each 2 x 3 verstellb. Poor 1.20 m, 870 kg capacity per arm with associations about 1.30 m Shelf stand double-sided about 5180 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 870 kg each arm / 2610 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

Kragarmregal, one-sided, 3m height, 1.20m arms, 500kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.150.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf edges on one side approx. 3,000 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable shelf arms carrying ability at load centre 600mm 500 kg per arm / 2250 kg per stem at 4 staenders per arm level 4 x 500 kg = 2,000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves of 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors.; New

Kragarmregal, one-sided, 3m height, 1.20m arms, 750kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 staenders 1,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf divider on one side approx. 3,000 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable shelf arms carrying ability at load centre 600mm 750 kg per arm / 2250 kg per staender at 4 staenders per arm level 4 x 750 kg = 3,000 kg with laengs and diagonal connectors e = 1300 mm with a row of shelves of 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! ; New

Kragarmregal, one-sided, 4,16m height, 1.20m arms, 750kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 pcs 1.450.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf divider on one side approx. 4160 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable helving arms carrying ability at load centre 600 mm 750 kg per arm / 2250 kg per stem at 4 staenders per arm level 4 x 720 kg = 3,000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves with 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New

Kragarmregal, one-sided, 3.5m height, 1.20m arms, 750kg per arm - New ware - : Price from location incl. loading! 1 shelving unit with 4 pcs 1.350.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: shelf divider on one side approx. 3500 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable helving arms carrying ability at load centre 600 mm 750 kg per arm / 2250 kg per staender with 4 stems per arm plane 4 x 750 kg = 3000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves with 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New

Side channel pump head,SIHI sterling

We offer you here a used side wall perforated of the manufacturer SSI Schäfer for sale. - Suitable for a stand depth of 500 mm - The side walls are suitable for the Fixing of perforated plate hooks - The side walls are made with screws directly attached to the stand frame Technical data for the side wall: Manufacturer: SSI Schäfer Type: R3000 Included in delivery are: 01x side wall, used Version: perforated Material: Stalblech Surface: galvanized Colour: silver Height: approx. 2,000 mm Depth: approx. 470 mm - The side walls are used and can be easily Have dirt, dents, scratches, etc. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelving s ...

with automatic working cycle, max. working width / stroke length of the oscillation 120 mm, drilling depth max. 80 mm, table inclination max. 20, tool clamping diameter max. 13 mm, drilling diameter max. 20 mm, spindle motor power 2.24 KW / volt. 380/50 Hz, spindle speed 9,000 rpm, oscillating motor power 0.75 KW, oscillation adjustable from 120 - 240 huebe per minute, pneumatic factory tension, 4 suction nozzles D=80 mm, space requirement - depth 1,000 mm, width 1,300 mm, height 1250 mm, weight 500 KG; Technically and visually in very good condition

FOUR SIDED PLANER model WEINIG PROFIMAT P 23 E with 5 spindles second hand machine working condition : Excellent CE mark : Yes volt. 380/50 grooved table ( removable ) quick tool locking device with tools : Yes , as in video Composed by 5 spindles , 4 motors : 1° spindle : planer . motor power Hp 5,5 ( Kw 4 ) 2° and 3° spindles : right and left vertical . motor power Hp 7,5 ( Kw 5,5 ) 4° spindle : thickness planer . motor power Hp 10 ( Kw 7,5 ) 5° spindle : planer . motor power Hp 5,5 ( Kw 4 ) grooved table ( removable ) quick tool locking device Technical details : forward motor power Hp 4 ( Kw 3 ) shaft rotation speed rpm 6000 feed speed : from 5 to 24 mt./min. max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2000 automatic lubrication system electric height adjustment set of service keys / d ...

Collar shelving, single-sided, 3 m height, 1, 20 m arms, 500 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.150.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3,000 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 500 kg = 2,000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor.

Collar shelving, single-sided, 3 m height, low-1, 20 m, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.295.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3,000 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 750 kg = 3,000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!

Collar shelving, single sided, 4, 16 m high, 1, 20 m arms, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.450.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 4160 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 720 kg = 3,000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!

Collar shelving, single-sided, 3.5 m height, 1, 20 m arms, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.350.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 750 kg = 3000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!

Collar shelving, double-sided, 5, 18 m high, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR2.295.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided measures 5.18 m, hot-dip galvanized IPE 180 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500 kg load capacity per arm with associations about 1.30 m Shelf stand double-sided about 5180 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2610 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

Collar shelving, double-sided, 4, 16 m high, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.850.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided about 4, 16 m high, hot-dip galvanized IPE 160 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500kg load capacity per arm with associations about 1.30 m Shelf stand double-sided about 4160 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

Collar shelving, double-sided, 3, 50 m height, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.750.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided 3, 50 m high, hot-dip galvanized IPE 160 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500kg load capacity per arm with associations about 1.30 m Shelf stand double-sided approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

Collar shelving, double-sided, 3, 50 m height, low-1, 20 m, 750 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.900.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided 3, 50 m high, hot-dip galvanized IPE 160 / 100 with each 2 x 3 verstellb. Poor 1.20 m, 750kg load capacity per arm with associations about 1.30 m Shelf stand double-sided approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

Assembly angle on both sides with threaded plates brand: Otto Kraft height 835mm ; Width 550 mm ; Length 450 mm plate size 750 mm x 500 mm All details without gewaehr

MULTI MOULDERS machine with 7 shafts type SCM SUPERSET 23 PLUS . with SLIDE and RETURN PIECES type MAHROS RP/4 second hand machine CE mark : Yes volt. 380/50 - Composition (7 shafts , 7 independent engines): 1° shaft : lower horiz . motor power Hp 7,5 2° shaft : right vertical . motor power Hp 7,5 3° shaft: left vertical (automatic). motor power Hp 7,5 4° shaft : upper horiz. motor power Hp 10 5° shaft : upper horiz. motor power Hp 10 6° shaft : lower horiz. motor power Hp 7,5 7° shaft : universal 360° . motor power Hp 10 grove table inlet length mm. 2400 feed speed: from 5 to 35 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 automatic lubrication system weight kgs. 4300

Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines. Machine is new, never used.

Carrousel lathes FKD 40 CNC with Y axis and CNC swivel head (A axis) Faceplate diameter 4000mm Rotating diameter: 8000mm Rotating height: 3000mm Ram: 300mm x 300mm Stroke: 3000mm X axis: travel distance 5000mm Z axis: travel distance 2000mm Y axis: travel distance 6000mm W-axis: travel distance 1500mm C-axis in faceplate-table A axis in milling head Control unit: Siemens 840 Dsl Tool changer: 60 pockets PickUp Station: 5 pockets

-Operating hours 16499 h -Operating pressure 10 bar -Quantity 0,95 m³/min -Drive 400 V / 7.5 kW -Space requirement approx. B H 1200 x 1000 X 650 mm -Weight approx. 250 kg -Compressed air dryer brand: ULTRATROC type: SD 0060-304 Machine number: 11869-47 year: 1998 -Max operating pressure 16 bar -Safety refrigerants R 134 A -Drive 220 V / 0.17 kW -Space requirement approx. B 600 x H 75 0 x D 300 mm -Weight 20 kg -Compressed air tank standing Make: VIG built: 1998 - operating pressure 11 bar -Content 1000 l -Space requirement approx. B 800 x H 2300 mm -Weight approx. 120 kg -Ã?WAMAT

Double side labeler incl. round labelling function, built in year of 2019, capacity approx. 30-35 cycles / min. Label length 20-300 mm / label height 160 mm / container diameter 20-110 mm The price is EURO 24.500,--.

Side channel blowers for silos Becker SD 6 2.4 kW, 220 / 380 V, 2880 / min 4.6 cubic meters / min = 276 cubic metres / hour, 3000 mm WS, good condition. Width 40 cm, length 75 cm, height 45 cm Weight approx. 40 kg. â?¬150 pickup in 76829 Landau, or freight shipping

MULTI MOULDER machine type WEINIG PFA 17N second hand machine 6 spindles with tools - Composition : 1° shaft : surface planer . motor power Hp 5,5 2° shaft : spindle moulder . motor power Hp 4 3° shaft : spindle moulder . motor power Hp 5,5 4° shaft : spindle moulder . motor power Hp 5,5 5° shaft : thickness planer . motor power Hp 5,5 6° shaft : surface planer. motor power Hp 5,5 inlet length mm. 2000 feed speed: from 7,8 to 58,8 mt./min max. useful working width mm. 170 max. useful working height mm. 120 lubrication system weight kgs. 2600 volt. 380/50

• Min working width (finished size): 25 mm • Max working width (finished size): 190 mm • Min. working height (finished size): 8 mm • Max working height (finished size): 115 mm • Min. workpiece length: 300 mm • Spindle speed: 6000 rpm • Spindle diameter: 35 mm • Min/Max tool diameter Horizontal spindles: 100 mm • Min. tool diameter of the vertical spindle right: 100 mm • Max tool diameter of the vertical spindle right: 100 mm • Min. tool diameter of the vertical spindle on the left: 100 mm • Max tool diameter of the vertical spindle on the left: 100 mm • Clamping length Vertical spindles: 110 mm • Clamping length Horizontal spindles: 180 mm • Diameter of feed rollers: 120 mm • Feed table length: 1800 mm • Quick adjustment task table and wing ruler: 10 mm • Diameter of the suction nozzle: 200 mm • mechanical indicators for width and h ...

Multi-sided wide planing machine with chamfer unit LEDINEK SUPERLES 300 4V + 4F Planing width (min/max): 70 - 300 mm Planing height (min -max): 19 -300 mm Workpiece length (min): 2,000 mm Feed speeds: up to 230m/min Weight: 13.500 kg

properties: Condition: fully functional, with traces of usage Manufacturer: Overbeck Feet to order separately Colour: blue/grey Ideal for fast material transport Expertly dismantled and packaged Technical data: Total width outside: 2,100 mm Total width inside: 1,200mm Total width incl. motor: 950mm Conveyor width: 50mm Incl. SEW Motor 0.18KW Incl. side guidance Curve radius approx.: 90 degrees Material: Galvanized Manufacturer: Interroll frame Height: 135mm Material: Steel roller conveyor curve Due to the excellent workmanship of the roller conveyor curve, your material glides gently to the destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt tracks, inclined belts or telescopes for loading and unloading your goods! We will be happy to prepare your indivi ...

New machine GSL 180/180 Rotor diameter 180mm Rotor width 180mm Drive 3 KW Rotor blade 18 Weight approx. 140 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common vacuum systems. Advantages: Special rotor knives make adjustme ...

New machine GSL 180/300 Rotor diameter 180mm Rotor width 300mm Drehzal 150 min. Drive 4 kW Rotor blade 30 pieces Strator knife 2 Screen perforation 5mm Weight approx. 180 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common va ...

New machine GSL 300/600 Rotor diameter 300mm Rotor width 600mm Drehzal 150 min. Drive 11 kW Rotor blade 48 pieces Strator knife 2 Screen perforation 6mm Weight approx. 950 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common v ...

Four-sided planing machine Harbs 250 x 150 mm 7 spindles 350 hours of uptime 3 m1 dressing table 8 newly rubberized feed rollers Grooved bed The machine is practically as good as new, ready for operation Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...