planer 4 side used for sale

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 460 mm -Cone mounting: Ø 100 mm -Threaded mounting (outer): 152 mm pitch 6G 1 3/8 1 1/2 -Through hole: Ø 84 mm -Weight: 56 kg

Manufacturer: CFS (GEA) Type: Compact 420 YOM: 2010 El. specs: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 YOM: 2010 includes 4 format sets Vacuum Pump: BUSCH R5 Includes ESPERA outfeed conveyor Condition: very good

Gear motor, electric motor, electric gear motor -Speed: 57 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 22 mm -Protection class: IP 54 -Quantity: 1x available -Dimensions: 455/155/H195 mm -Weight: 18.8 kg

saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 130 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: flat: 110 x 125 mm saw blade turning speeds: 3000 U/min total power requirement: 1,75 kW weight of the machine ca.: 140 kg dimensions: 1,0 x 0,65 x 1,5 m Alu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double hydraulic pump, oil pump, gear pump Manufacturer: ATOS -Rotor pump type: PFED-43056/022/1DTO -Shaft diameter: 22 mm -Number: 4 pumps available - Price: per piece -Dimensions: 175/325/H195 mm -Weight: 28 kg

Heavy-duty casters, heavy-duty wheels, tires, solid rubber tires -Load capacity: kg -Tire size: 400 x 145 mm -Holding bore: 60 mm -Number: 3x wheels available -Price: per piece -Weight: 60 kg/piece

Gear motor, electric motor -Speed: 18 rpm -Power: 0.18 kW -Construction: B3/5 angle -Shaft diameter: Ø 12 mm -Protection class: IP 55 -Dimensions: 290/130/H170 mm -Weight: 5.7 kg

For sale is a processing plant for third-party take-back polystyrene - fully functional. Feeding table: 2000x2000x900 Belt conveyor: 1420x4000 Slope: 21° Transport speed: 4-16 m/min Design: (50Hz):8m/min Styrofoam mill: 2180x2496x1590 Filling opening: 1500x1000, weight 1500kg

Commonrail Pump Used from experimental setup. Few hours

Geared motor, electric motor, electric geared motor -Speed: 116 rpm -Power: 0.25 kW -Diameter: Ø 16 mm -Design: B5 -Protection class: IP 54 -Number: 5x motors available Price: per piece -Dimensions: 340/180/H145 mm -Weight: 9.8 kg

Door holding magnet -Type: 425/24 -Liability: 70 CP -Number: 2x available -Price: per piece -Weight: 1 kg

Gear motor, electric motor, electric gear motor -Speed: 37 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: -Brake: 220 V -Number: 1x motors available -Price: per piece -Dimensions: 470/200/H165 mm -Weight: 19 kg

clamping force: 1300 kN injection volume: -- cm³ screw diameter: 45 mm platen size: 470 x 470 mm Condition: used, Specification: Horizontal injection moulding machine, Type: Allrounder 470 S 1300-350 Injection unit: - Screw diameter: 45 mm - Centring ring diameter: 125 mm - Shot weight max.: 210 g (PS) - Injection pressure: 1,840 bar Clamping unit: - Clamping force: 1300 kN - Opening stroke max.: 850 mm - Mould installation height: min. 275 mm - Mould mounting platens: 470 x 470 mm - Operating hours approx.: 91,000 - Core pulls: 1x - Valve gate: 1x pneumatic - Hot runner control points: 12x - Temperature control unit interfaces: 6x (20 mA) - Conveyor belt in the machine - Selector unit. available - Release for high temperature up to 450°C - Communication card for ProSeS interface available - Robot interface available. Technical pr ...

Used 250 L dough mixer by Diosna type W 402 A with three tanks. The machine has one speed.

Inv. Num. : 7155 Type: UR4-4DD-UF6 Producer: HMP Created: 2000 Parameters: Max. diameter: 25 mm Components: Reducing hammers with 4 segments 6-segment roll forming hammers

Geared motor, electric motor, electric geared motor -Speed: 20 rpm -Power: 0.25 kW -Shaft diameter: Ø 30 mm -Design: B5 -Protection class: IP 33 -Brake: 220 V -Quantity: 1x motor available -Dimensions: 510/210/H220 mm -Weight: 27 kg

Key data: 1100 , 40

Screw diameter; 40 mm Injectable volume: 201 cm3 Injection pressure: 1859 bar Turntable: 1040 mm Mould thickness min: 300 mm max: 600 mm Cores: 3 Robot Interface: Yes Mold Heating Zones: 8

Key data: 1300 , 40

Screw diameter: 40 mm Injectable volume: 182 mm Injection pressure: 2120 mm Passage between columns: 420 x 420 mm Opening stroke: 500 mm Core: 1 Blower: Robot Interface

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Roller diameter: 80 mm -Transport roller width: 490 mm -Total length: 520 mm -Shaft diameter: 12 mm -Number: 109 rolls available -Price: per piece -Weight: 2.3 kg/piece

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 25 rpm -Power: TA = 8 Nm -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 360/140/H185 mm -Weight: 14.4 kg

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Heating- and drying oven for temperatures from +20°C up to 300°C. Special turnstile drive for 1L bulkhead jars, TwinDISPLAY. Max. loading of chamber: 300 kg.

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Manufacturer: Sandvik Coromant R391.B03R-40F53 A -Socket: Ø 40 mm -Boring tool holder: 16 x 8 mm -Tool: Ø 435 mm -Weight: 6.1 kg

Permissible operating overpressure: 6.0 bar Permissible flow temperature: 120 C Permissible boiler power: 400 kW Heating output: 444 kW Content: 380 liter Burner: Weishaupt RGL 3/1 - E Year: 1994 Fuel: Heating oil EL and natural gas Subject to prior sale - errors possible Internal Reference Number: D-1176

max. wheel diameter: 420 mm gear width: 120 mm max. module: 8 min. module: 0,5 control: BWO CNC no. of strokes: 32-800 Hub/min total power requirement: 50 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 5,3 x 3,9 x 3,4 m Machines increase 100 mm intermediate plate automatic Hublageverstellung automatic Hublängeverstellung 5 axis controlled machine BWO last type C, D, X, Z, L axes are CNC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -Tool: 70° -Thickness: 30 mm -Total length: 475 mm -Lengths: 95/109/112/159 mm -Overall height: 193 mm -Weight: 18 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -Tool for: closing folds -Thickness: 25 mm -Total length: 470 mm -Overall height: 195 mm -Weight: 18 kg

RECON Part Number: 1.60.6-26.60.01-06 Kolbenschmidt 1. Ring groove: 0.75mm ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Electronics cables, extension cables, electronics cables -Manufacturer: Helukabel -Type: TRONIC-CY 4X0.25 QMM -Length: 1030 m -Number: 4x wires á 0.25 mm² -Price: complete -Dimensions: 495/495/H320 mm -Weight: 40 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool radius: 10 mm -Thickness: 20mm -Total length: 471 mm -Total height: 188 mm -Recording width: 80 mm -Weight: 19.8 kg

Recon Catalog number: 1.2510 (1.64.6-25.10.01-04A) Sanded to 1 level undersize ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Alimex Paddle Mixer M 400 Year of manufacture: 2021 / new machine Volume: 400 liters Max. filling: 300 kg Speed: 1 forward speed and 1 reverse speed each Power: 4.4 kW / 400 Volt Alimex Paddle Mixer M 400 Year of manufacture: 2021 / new machine Volume: 400 liters Max. Loading: 300 Kg Speed: 1 forward speed and 1 reverse speed each Power: 4.4 kW / 400 V

Geared motor, electric motor, electric geared motor -Speed: 20 rpm -Power: 0.25 kW -Shaft diameter: Ø 25 mm -Design: B5 angle -Protection class: IP 54 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 460/270/H190 mm -Weight: 24.3 kg

Gear motor, electric motor, electric gear motor -Speed: 15 rpm -Power: 0.25 kW -Diameter shaft: Ø 25 mm -Construction: B5 angle -Protection class: IP 54 -Brake -Number: 8x motors available -Price: per piece -Dimensions: 460/270/H190 mm -Weight: 26 kg

Gear motor, electric motor, electric gear motor -Speed: 42 rpm -Power: 0.25 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 44 -Brake: 24 volts -Number: 2x motors available -Price: per piece -Dimensions: 430/210/H220 mm -Weight: 16.8 kg

Catalog No. : 7418 Type: Concept 420/810-2300 Producer: Demag Made in: 2006 Characteristic: Clamping force: 420 t Closing force: 4200 kN Screw diameter: 70 mm Injection capacity: 891 cm³ Injection weight: 800 g Height of the plate for mounting the mold: 1200 mm Width of the plate for mounting the mold: 1100 mm Distance between the columns (horizontal): 800 mm Distance between the columns (vertical): 710 mm Maximum injection pressure: 1877 bar Mold height: 820 mm Machine length: 7800 mm Machine width: 2200 mm Machine height: 2400 mm Weight of the injection molding machine: 20000 kg

Gear motor, electric motor, electric gear motor -Speed: 45/90 rpm -Power: 0.16/0.3 kW -Diameter shaft: Ø 20 mm -Construction: B3 -IP protection -Dimensions: 360/160/H175 mm -Weight: 14 kg

Gear motor electric motor -Speed: 125 rpm -Power: 0.44 kW -ED: 60% -Construction: B5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Brake -Dimensions: 410/260/H225 mm -Weight: 22 kg

- Model: F 385.41 - 4 cartons of 3 x 2 bottles per operation - Boxes : many different sizes - Full carton control: With bottle counter system - With bottles of single-breasted MASPACK 110/14/RED (2006) for pressureless lining of bottles - Machine in perfect condition

Heat recovery system wit 450ltr enameled tank + double wall heat exchanger for DHW. Good condition. Prepare to connect for Your refrigeration system. 450ltr+108/21x16/10 (1,6) 450ltr+76/10x16/10 (1,4)

Gear motor, electric motor -Speed: 79 rpm -Power: 0.18 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 415/250/H250 mm -Weight: 26 kg

Ransomes - Parts // also Agria Iseki Jacobsen SABO Shibaura Toro Used parts and components available from stock for: 213 D, 350 D, Commander 3510, Fairway 405, MK IV, MK 11, Rider J74: mowing spindles, hydraulic components, engines, axles, wheel drives, hydrostats, hydraulic pumps, wheels and tires, steering parts, steering orbit rollers, etc. Other miscellaneous parts of Agria 9300, Jacobsen HR5111; 1471, Gutbrod 2850DA, Iseki div., Hako 1800-2750, John-Deere div., Sabo 1203; 1500; 1502D; RS84 Senior, Shibaura SP1840; CM364, Toro Pro81 etc. ... Complete spindle units and 3-fold cylinder mowers Bucher, Loipfinger, Jacobsen as well as Ransomes and SABO Info and offers on request. No sending of package deals or lists.

more available DIGI Fully Automatic Stretch Film Packaging Machine Type AW-5600 or AW 4600 Year of construction div. We will be happy to provide you with a package price offer if you accept several machines!

We offer directly on behalf of the owner : Bending press, second-hand Make : Graebener Maschinentechnik (Gräbener) Type : GRNM Year of construction : 2005 Flexural force max.: 16.000 kN ( 1.600 t ) Tool length : 1,600 mm Data at 520 N/mm2 Pipe diameter max.: 1,524 mm Tube diameter min.: 457 mm Sheet thickness max.: 40 mm Max. pipe length: 13.2 m Pipe length min.: 6m Pipe weight max.: 25 t Total power requirement approx.: 245 kW / 400 V / 50 Hz Approx. space: 27 x 3 m Total weight approx.: 90t / basic machine approx. 65t Further technical data and details on request or see data sheets in photos / PDF The machine was built in 2005, worked until 2021 and was professionally dismantled and packed for transport.

I am selling a heavy briquetting press RUF RB440. Year of construction 11/2002 Motor power 30kW Productivity Number 400 pcs. wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions 3000 x 1800 x 2000 mm Total weight 3000kg Equipment on the right - right entry box. Condition after full remont/500Mtstd warranty like new. Available soon. With full documentation and CE.

Plastic protectors, collision protection, bollards, polyamide -Full material -Width: 130 mm -Length: 475 mm -Height: 100 mm -Number: 1x saver available -Price: per piece -Weight: 5.2 kg/piece

Three-phase motor, electric motor -Power: 37 kW -Speed: 1480 rpm -Shaft: Ø 42 mm -Construction: B14 -Protection class: IP 65 -Dimensions: 820/550/H450 mm -Weight: 330 kg

Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Max. Operating pressure: bar -Temperature range: up to 120 °C -without fan -Dimensions: 420/120/H650 mm -Weight: 32 kg

Gear motor, electric motor, electric gear motor -Speed: 24.8 rpm -Power: 0.37 kW -Diameter hollow shaft: Ø 30 mm -Construction: hollow shaft -Protection class: IP 55 -Brake -Dimensions: 340/290/H210 mm -Weight: 21 kg