planer 4 side used for sale

Working width: 510 mm; Planing height: 250 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric; Planer thickness indicator: digital display; Feed speed: 8 / 16; Feed roller: steel; Pressure beams: articulated; Pull-out roller: steel; Table rollers: no; Engine power: 7 kW; Suction connection: 120mm; Machine length: 800mm; Machine width: 900 mm; Weight: 650kg;

Description: Max. machinable height 120 mm Maximum machinable width 230 mm Lined sliding table yes Max. forward feed speed 25 m/min Operator shafts number 5 Min. machinable height 6 mm Maximum machinable height 120 mm Min. machinable length 620 mm Min. machinable width 25 mm Maximum machinable width 230 mm Lined sliding table yes Max. forward feed speed 25 m/min Forward feed wheels yes Operator units 5 OPERATOR UNITS 1 Cutting shaft : bottom shaft diameter : 40 mm shaft length : 250 mm max. tool diameter : 200 mm Motor power : 7.5 KW OPERATOR UNITS 2 Cutting shaft : Right shaft diameter : 40 mm shaft length : 195 mm max. tool diameter : 200 mm Motor power : 7.5 KW OPERATOR UNITS 3 Cutting shaft : left shaft diameter : 40 mm shaft length : 195 mm max. tool diameter : 200 mm with positioning from NC : yes Motor power : 11 KW OPERATOR UNITS 4 Cutting shaft : top shaft diameter : 40 mm shaft ...

Description: Serial number: 10404-000243 Rated power: 1500 W Nominal speed: 9000 rpm Table dimensions: 740 x 210 mm Approx. Onsite Dimension. (l x w x h): 780 x 450 x 450 mm, weight approx.: 30 kg

Working width: 630 mm Dimensions (L/W/H): 115x110x120 mm turning speeds: 5000 U/min connected load frequency: 380 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Planing width: approx. 63 mm Thickness passage: up to 220 mm Table dimensions: approx. 2100 x 630 mm Approx. Onsite Dimension. (l x w x h): 2,100 x 700 x 1,000 mm, weight approx.: 1,200 kg

Description: Consisting of approx. 10 pieces Approx. Onsite Dimension. (l x w x h): 500 x 400 x 150 mm, weight approx.: 30 kg

Description: Consisting of approx. 12 pieces Approx. Onsite Dimension. (l x w x h): 500 x 400 x 100 mm, weight approx.: 40 kg

Description: Consisting of 10 pieces Approx. Onsite Dimension. (l x w x h): 500 x 400 x 100 mm, weight approx.: 40 kg

Description: Consisting of 5 pieces Approx. Onsite Dimension. (l x w x h): 650 x 420 x 150 mm, weight approx.: 50 kg

Description: Consisting of 7 pieces Approx. Onsite Dimension. (l x w x h): 650 x 420 x 150 mm, weight approx.: 50 kg

Description: Consisting of 14 pieces Approx. Onsite Dimension. (l x w x h): 600 x 400 x 100 mm, weight approx.: 70 kg

Description: Planer, 4-sided moulder serial number: AB/095522 size of workpiece width: 20-230mm thickness: 8-160mm feeding speed: 6-30 m/min infeed table length: 2.000 mm height adjustment infeed table: 10mm 1st lower horizontal planer shaft, diameter 40mm, motor power 5,5kw, 6.000 rpm 2nd vertical planer shaft, diameter 40mm, motor power 5,5kw, 6.000 rpm 3rd vertical planer shaft, diameter 40mm, motor power 5,5kw, 6.000 rpm 4th upper horizontal planer shaft, diameter 40mm, motor power 7,5kw, 6.000 rpm 5th lower horizontal planer shaft, diameter 40mm, motor power 7,5kw, 6.000 rpm feeding motor power 3 kw, 380v, 50Hz, 71A  , serial number: AB/095522, feed: planer moulder m/min, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,100 x 1,700 mm, weight approx.: 3,100 kg

Description: serial number: 337 serial number: 337, Approx. Onsite Dimension. (l x w x h): 1,690 x 1,690 x 1,200 mm, weight approx.: 1,100 kg

Description:  , serial number: 212 serial number: 212, Approx. Onsite Dimension. (l x w x h): 2,550 x 1,350 x 1,000 mm, weight approx.: 800 kg

Description: serial number: M000076467 Size of workpiece Width: 20-230mm Thickness: 8-160mm Feeding speed: 6-30 m/min Infeed table length: 2.000 mm Height adjustment infeed table: 10mm 1st lower horizontal planer shaft, diameter 40mm, motor power 7,5kw, 6.000 rpm 2nd vertical planer shaft, right, diameter 40mm, motor power 5,5kw, 6.000 rpm 3rd vertical planer shaft, left, diameter 40mm, motor power 5,5kw, 6.000 rpm 4th upper horizontal planer shaft, diameter 40mm, motor power 7,5kw, 6.000 rpm 5th lower horizontal planer shaft, diameter 40mm, motor power 9,2kw, 6.000 rpm 6th UNIVERSAL (vertical or horizontal) planer shaft, diameter 40mm, motor power 5,5kw, 6.000 rpm Feeding motor power 3 kw serial number: M000076467, planing width: 240 mm, Approx. Onsite Dimension. (l x w x h): 4,800 x 2,200 x 2,000 mm, weight approx.: 2,000 kg

Description: • Thickness planer, thicknesser • Working width 400 mm • Maximum workpiece thickness approx. 230 mm • Table dimensions 710 x 400 mm • Main motor 3 KW • Spindle with 4 knives • Dimensions for transport 1200 x 800 x 1150 mm Approx. Onsite Dimension. (l x w x h): 830 x 800 x 960 mm, weight approx.: 400 kg

Description: Planing width 530 mm, table length 2300 mm, thicknessing table length 920 mm, planing shaft diameter 120 mm, knife 4, without documentation and CE certificate Approx. Onsite Dimension. (l x w x h): 2,400 x 1,400 x 1,200 mm, weight approx.: 1,100 kg

x-travel:3200 mm y-travel:2000 mm z-travel:800 mm table-size:3200 x 1600 mm T-slot (width-distance-quantity):8x 22 x 180 mm max. table load:10 t distance between columns:1840 mm distance spindle nose and table:180~980 mm spindle drive:22/26 kW max. torque on the spindle:560/662 Nm spindle nose:50 BT spindle speed:6000 U/min rapid traverse X,Y:20000 mm/min. rapid traverse Z-axis:15000 mm/min milling feed range:1~10000 mm/min Machine size (LxWxH):8927 x 5217 x 4339 mm total power requirement:60 kva weight of the machine ca.:29 t positioning accuracy:0,025 (gem. VDI/DGQ3441) mm repeating accuracy:0,020 (gem. VDI/DGQ3441) mm CNC controller:FANUC 0i MF (mit AICC II, Ethernet DNC, fine mould package, machining condition selecting) gear box:BF Getriebe heat exchanger:für den Schaltschrank chip conveyor with chip bucket:2 Stk. Spirale, 1 Stk. Scharnierband CE-design:gegen Mehrpreis möglich (ve ...

x-travel:8500 mm y-travel:4300 mm z-travel:1066 mm distance spindle nose and clamping angle:300-1366 mm distance between columns:3500 mm table-size:8000x3100 mm table load:30000 kg spindle taper:50 BT spindle speed:vertikal: 6000 1/min; horizontal: 2000 1/min spindle drive:30 kW Tool changer:60 CNC controller:Siemens 840 Scales:von Heidenhain in allen 3 Achsen automatic tool changer:Vertikal/Horizontal 60- fach Tool setter:von RENISHAW TS-27 fully enclosed:(oben offen) Automatic head changer 4 positions:inkl.90° Kopf & Verlängerung

x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 spindle speed:24000 U/min spindle drive:25/33 kW Spindle motor torque:72.6/95.8 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 fach max. tool diameter:100/130 mm max. tool length:300 mm max. tool weight:8 kg total power requirement:80 kva Weight approx.:22 t Machine size (LxWxH):5660 x 5295 x 3930 mm CNC controller:Heidenhain TNC 620 spindle:IBAG electric spindle 24000rpm HSK-A63 Scales:Heidenhain automatic tool changer:20 fach chip conveyor - auger:2 Stk. Used portal milling machine with extensive accessories at a special introductory price. Important manufacturers of the components used i ...

x-travel:1300 mm y-travel:1900 mm z-travel:800 mm distance spindle nose and table:180~980 mm distance between columns:1840 mm table-size:1650x1300 mm table load:4 t T-slot (width-distance-quantity):22x180x7 mm spindle cone:50 BBT spindle speed:10000 1/min spindle drive:15/18,5 kW Spindle motor torque:526 NM rapid traverse in x-y-z axis:20/20/15 m/min feeds:1~10000 mm/min Tool changer:24 -fach workpiece length:350 mm tool diameter:110/220 mm weight of tools max.:15 kg positioning accuracy:0,020|0,025|0,03 mm repeating accuracy:0,015|0,020|0,025 mm total power requirement:60 kva machine length:4900 mm machine width/height:4160×4339 mm Weight approx.:18 t automatic tool changer:24 fach :Gewindebohren ohne Ausgleichsfutter CNC controller:Heidenhain/Siemens/Fanuc gear box:von Barufaldi/Italien CE-design:gegen Mehrpeis möglich (TUEV) inner coolant:30 bar chip conveyor - auger:im Maschinenbet ...

x-travel:2300 mm y-travel:2000 mm z-travel:1000 mm table-size:2300 x 1600 mm T-slot (width-distance-quantity):8x 22 x 180 mm max. table load:8 t distance between columns:1840 mm distance spindle nose and table:180~1180 mm spindle drive:22/46 kW max. torque on the spindle:140.1/286.5 Nm (S6-25%) spindle nose:50 SK spindle speed:10000 (direkt) U/min rapid traverse X,Y:20000 mm/min. rapid traverse Z-axis:15000 mm/min milling feed range:1~10000 mm/min Machine size (LxWxH):7027 x 5217 x 4339 mm total power requirement:60 kva weight of the machine ca.:25 t positioning accuracy:0,020 (gem. VDI/DGQ3441) mm repeating accuracy:0,015 (gem. VDI/DGQ3441) mm CNC controller:Heidenhain TNC 620 automatic tool changer:Optional gear box:BF Getriebe (optional) chip conveyor with chip bucket:2 Stk. Spirale, 1 Stk. Scharnierband inner coolant:20 bar CE-design:vom TUEV Used Milling Machine KRAFT VM-3218 with ...

x-travel:3100 mm y-travel:3600 mm z-travel:1066 mm table-size:3200x2050 mm max. table load:10000 kg distance between columns:2800 mm distance spindle nose and table:300~1366 mm spindle drive:31 kW(S1)/40 (S6-40%) kW spindle nose:A100 HSK spindle speed:10000 U/min rapid traverse X,Y:12/12 m/min. rapid traverse Z-axis:12 m/min Machine size (LxWxH):8775x7140x7378 mm weight of the machine ca.:59 t positioning accuracy:X , Y , Z Axis : ±0.005/2000 mm; A Axis ? ±0.002 ° C Axis ±0.002 ° mm repeating accuracy:X , Y , Z Axis ±0.0055/2000 mm, A Axis : ±0.002 ° C Axis ±0.002 ° mm automatic tool changer:24 fach CNC controller:Siemens 840 UNIVERSAL AUTOMATIC A-C TYPE 2.5° MILLING HEAD (VG:AC52 mit A-/C-Achse linear guide:in X-Achse 4 Stück CE-design:als Option (verlängert die Lieferzeit) New Milling Machine KRAFT VM-5225 For more information please see the attached documents.

x-travel:1200 mm y-travel:800 mm z-travel:550 mm distance spindle center to table:150-700 mm distance between columns:920 mm table-size:1320x800 mm table load:2000 kg T-slot (width-distance-quantity):14x120x7 mm spindle taper:HSK-A 63/HSK-E 50 spindle speed:15000 (opt. 24000/36000) U/min spindle drive:7.5/11 (opt. 30/39; 20/26 kW Spindle motor torque:47.7/70 (opt. 29.1/37.8; 10.4/13.5) N.m. rapid traverse in x-y-z axis:30000 (opt. 40000) mm/min Cutting feed rate X/Y/Z axis:1~10000 (opt.1~20000) mm/min Tool changer:20 (opt. 24) max. tool diameter:100/130 (opt. 80/130) mm max. tool length:300 (opt. 220) mm max. tool weight:8 (opt. 4) kg total power requirement:30 (opt. 80) kva Weight approx.:12 t Machine size (LxWxH):5026x4276x3210 mm positioning accuracy:0,014 mm repeating accuracy:0,008 mm CNC controller:Siemens/Fanuc/Mitsubishi/Heidenhain automatic tool changer:20/24 linear scales:Heide ...

x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance spindle center to table:200-900 (opt. 225-925/250-950) mm distance between columns:1500 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x160x8 mm spindle taper:HSK-A 63/HSK-E 50 spindle speed:15000 (opt. 24000/36000) U/min spindle drive:15/18,5 (opt. 25/33 od. 20/26) kW Spindle motor torque:95/118 (opt. 72.6/95.8; 10,4/13,5 N.m. rapid traverse in x-y-z axis:30000 (opt. 40000) mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 (opt. 24) max. tool diameter:100/130 (opt. 80/130) mm max. tool length:300 (opt. 220) mm max. tool weight:8 (opt. 4) kg total power requirement:60 (opt. 80) kva Weight approx.:22 t Machine size (LxWxH):5026x4276x3210 mm positioning accuracy:0,014 mm repeating accuracy:0,008 mm CNC controller:Siemens/Fanuc/Mitsubishi/Heidenhain automatic tool changer:20/24 ch ...

2-sided LED display panel, SX502-420/05/0X-200-0A-20/0, Siebert, mint condition Special price The current price of a similar product is € 5.300 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new in original packaging! This high quality scoreboard was purchased in early 2000 and has been originally packed in spare parts storage since then. The unit is as good as new and has never been used. On the part of the manufacturer there is a limited service. Parallel interface for Profibus Serial interface for PC 2 page LED display 104 x 40 x 21cm Incl documentation and programs Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will ref ...

New machine GSL 180/430 Rotor diameter 180mm Rotor width 430mm Drehzal 150 min. Drive 4 kW Rotor blade 45 pieces Strator knife 2 Screen perforation 5mm Weight approx. 250 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common va ...

New machine GSL 300/400 Rotor diameter 300mm Rotor width 400mm Drehzal 150 min. Drive 7.5 kW Rotor blade 33 pieces Strator knife 2 Screen perforation 6mm Weight approx. 550 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common  ...

Technical data Work-piece diameter: 5 - 50 mm Max. work-piece height: 1 - 70 mm Arrangement: bilateral (above, below) Grinding wheel: outside diameter: 457 mm inside diameter: 76.2 mm Width / height: 75 mm Grinding wheel speeds: from: 251 rpm up to: 1254 rpm from: 6 - 30 m/s Speed of the work-piece driving plate: from: 21.8 rpm up to: 215 rpm Voltage: 380 Volt Grinding motor power: 2 x 30 kW Total installed power: 35 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 2450 mm Width: 1100 mm Height: 2700 mm Various accessories: Measuring instrument: IONIC

Specifications: System: SSI Schäfer Type: K-SW-4300 Included in delivery are: 01x side bolster, second choice Length: approx. 4,294 mm Profile type: C115/22/2 C-profile: approx. 115 x 22 x 2 mm Unit weight: approx. 13.23 kg Information: - for KDR levels in PR and WR systems by SSI Schäfer for the inclusion of Longitudinal & transverse profiles as well as roller strips - also suitable with kink - can be used both inclined and in scales

– after technical inspection – year of production 1999 – chrome tops – electronic height setting TECHNICAL PARAMETERS: planing width 230 mm planing height 130 mm electric adjustment of the left head electric adjustment of the upper head electronic height adjustment five steel top rollers one top rubber roller spindle diameter 40 mm 1 bottom spindle 5.5 kW 2 right spindle 3 left spindle 7.5 kW 4 upper spindle 7.5 kW tool diameters 160 and 180 mm pneumatic clamps feed on cardan shafts smoothly adjustable feed 6-20 m/min feed motor power 2.2 kW chrome tops pre-table top length 1980 mm connection diameter 4 x 130 mm dimensions of the machine (L/W/H) 340 / 190 / 200 cm weight 2200 kg

Catalog No. 6765 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm number of spindles 4: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm - electrically adjustable right/left from the control panel 5.5kW 4) horizontal top 230mm - electrically adjustable up/down from the control panel 7.5kW - all spindles adjustable up / down, right left - spindle diameter 40mm in advance: - introductory pulling rollers, toothed 6 pcs, including 2 double - pulling out rollers, rubber 2 pcs from down: - introductory toothed, metal, torsion roller in the bottom plate + - smooth metal pulling roller - pneumatically adjustable rollers - length of the introductory tabletop (with pneumatic feeder) 3390mm - the ability to work without switching on the pneumatic feeder, - adjustable top / bottom - central lubrication - ...

Four-sided planer Ledinek 400/160/5 – Slovenian production – for wet wood – adjustable heads TECHNICAL PARAMETERS: planing width 400 mm planing height 160 mm spindle diameter 35 mm 1) bottom shaft 4 kW 2) upper shaft 5.5 kW 3) right head 4 kW 4) left head 4 kW 5) lower head 4 kW two feed speeds feed motor power 2.2 kW minimum material length 400 mm three upper toothed pulling shafts three upper smooth pulling rollers six upper pressure rollers pinion shaft pulling in the tabletop in front of the first head three auxiliary rollers in the top spigot diameter 5 x 110 mm machine dimensions (length / width / height) 310 / 180 / 170 cm weight ~2000 kg

Manufacturer: IMA, Type: Quadromat 4012 F, Year: 1995, Program: yes, Min-max edge material mm: 0,5 - 8,0, Min.-max. workpiece length in mm: 250, Min-max feed m/min: 10, Premilling: yes, Min.-max. batten magazine mm: 0,5 - 8,0, Mitre stations: yes, radius milling: yes, Corner tracing type: yes, 2 Motoren: yes, Year :1995

Control cabinet, distribution cabinet, control cabinet TS modular cabinet, profile door -Side walls pair -Price: complete -Dimensions each: 1395/460/H15 mm -Total weight: 16 kg

HEMINGSTONE JP-40SE-SV Year 2002 Side sealing machine Bag size - Width 900 mm , Length 200-900 mm Available bottom sealing bar

Cantilever rack, heavy-duty rack, single-sided cantilever rack, pallet rack -Cantilever rack: one-sided, 5 bays H/W/D 4000/5150/1970 mm -Cantilever arms: 3 levels / shelf height: adjustable -Cantilever arm length: 1970 mm -Arm load: 700 kg / stand load 2100 kg -Total weight: 1700 kg

Load: 4.5t, lifting height: 3800mm, battery weight: 1.95t, weight: 7.39t, operational hours counter: 26h.

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails, 2-side rectangular rails -Manufacturer: Grass, NP 2-side rectangular railing set -Type: 7607/400/2S-RER-SET/9006/1 -Item no.: F102045860 -Length 400 mm -Quantity: 1x set available -Transport dimensions: 400/100/H40 mm -Weight: 0.4 kg/set

CATALOG NO. 7165 TECHNICAL DATA - max width of the processed element 180mm - max height of the processed element 120mm 4 spindles: 1) horizontal bottom 180mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal top 180mm 5.5kW - spindle diameter 40mm - all heads adjustable up/down, right/left - pressure at the insertion - 6 introducing, pulling and toothed rollers, including 2 double ones - double output, pulling, rubber roller from above - at the bottom, an introducing, pulling, toothed, wide, metal roller - a pulling, metal, smooth roller from the bottom - 2.2kW feed motor - feed on cardan shafts - smooth regulation of feed speed - electric setting of planing thickness - lifting motor 0.75kW - central lubrication of the countertop - length of the introductory tabletop 1580mm - diameter of the exhaust pipe 4x120mm - dimensions length/width/h ...

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails -Manufacturer: Grass, Nova side railing set in original packaging -Type: 7607/450/2S-RER-SET/9006/1 -Item no.: 45861-01 -Length 450 mm -Quantity: 4x set available -Price: per set / minimum order 2 sets -Transport dimensions: 450/100/H40 mm -Weight: 0.4kg/set

Key data: 4 , 300 mm, 200 mm

I am selling the new four-way planer LEADERMAC COMPACT 430, New machine built in 2024. Exhibition machine ! Konfigurazion 4 Spindle: Bottom 7.5 kW / 10.0 HP Right 7.5 kW / 10.0 HP Left 7.5 kW / 10.0 HP Top 7.5 kW / 10.0 HP Feed rate adjustable 6-24 m/min. Feed motor 7.5 kW / 10.0 HP + inverter Element max. width 15-300mm Element max. height 10-200mm All 6 spindles 6000 rpm. Schneider Touch-Screen EASYSET Electronic programming for working width, working height and contact height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4000kg. Combined power 39 kW / 52 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Incl. CE and complete documentation !

Four-sided planer REX HOMS-410 – made in Germany – for wet wood TECHNICAL PARAMETERS: planing width max. 410 mm planing height on both sides 200 mm planing height on four sides 200 mm spindle diameter 40 mm shaft motor power 2 x 11 kW spindle motor power 2 x 5.5 kW feed speed infinitely adjustable feed speed adjustable on the inverter three upper pulling rollers three lower pulling rollers two auxiliary rollers in the table top brake minimum workpiece length 450 mm dimensions of the machine (length/width/height) 250 / 220 / 180 cm weight ~ 3500 kg

REX U 41K four-sided planer - German production - DTR - numerical control - year of production 1997 - milling heads - for wet wood - total power 51.5 kW TECHNICAL PARAMETERS: - planing width 410 mm - planing height on 2nd and 4th side 260 mm - electronic adjustment of planing height and width with the possibility of programming fixed dimensions 1 lower shaft 7.5 kW 2 upper shaft 11 kW 3 right spindle 7.5 kW 4 left spindle 11 kW milling units 2 x 1.85 kW - feed smoothly adjustable electrically - feed speed range 5-30 m/min - 3 kW feed motor - five pull rollers in the tabletop - two auxiliary rollers in the tabletop - five upper pulling rollers - four pressure rollers on vertical spindles - pneumatic side pressure of the material - adjustable heads - adjustable lower shaft - minimum material length 400 mm Transport dimensions 420 x 230 x 230 cm weight ~ 5  ...

OEM Bearing Assembly - Turbine Side (p.n. 38) for ABB VTR 400 Turbocharger Bearing unit is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

OEM Oil Pump - Blower Side (p.n. 47) for ABB VTR 400 Turbocharger The Pump is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

Cantilever rack, heavy-duty rack, cantilever rack 1-sided -Cantilever rack: one-sided, 6 bays H/W/D 4500/7500/1250 mm -Cantilever arms: 7 levels / shelf height: adjustable -Cantilever arm length: 1250 mm -Arm load: 762 kg / stand load 2450 kg -Accessories: incl. shelves, see photos -Total weight: 3100 kg

FOUR SIDE PLANER machine type MAGIC RECTA 22 second hand machine n.04 spindles with tools (Yes) n.04 separate motors : 1° shaft : surface planer . motor power Hp 4 2° shaft : spindle moulder . motor power Hp 4 3° shaft : spindle moulder . motor power Hp 4 4° shaft : thickness planer . motor power Hp 5,5 entry table length mm. 2000 max. useful working width mm. 220 max. useful working height mm. 120 diameter of shaft mm. 40 volt. 380/50 net weight kgs. 1200

4 SIDE PLANER machine model GUILLET KXR with n.4 spindles second hand machine in Excellent working condition - Composition : 1° shaft : surface planer . motor power Hp 7,5 2° and 3° shaft : spindle moulder . motor power Hp 7,5 4° shaft : thickness planer . motor power Hp 7,5 inlet length mm. 2000 feed speed: from 4,5 to 27 mt./min . motor power Hp 2 automatic lifting. motor power Hp 0.35 vertical and horizontal movement of 2nd and 3rd shaft vertical and horizontal movement of 4th shaft max. useful working width mm. 220 max. useful working height mm. 120 weight kgs. 1600 volt. 380/50

Four-side planer / profile milling machine Fabr. Gubisc Model: 172/1K+R Year of construction: 1981 Planer width: 170mm 5 spindles