planer 4 side used for sale

Description: Technical data: tape thickness: 0.3 - 3 mm material thickness: 8 - 60 mm conveyor speed: 18 - 25 m / min The edgebander consists of the following aggregates: • 2 pre-milling machines for material processing (3 kW each) • material heating lamp • glue heating vessel • container with roller for applying glue to the material • push rollers • 2 stripping units (each 0.8kw) • 2 units with radial cutters for processing the upper and lower edges (1.5 kw each) • 2 postforming aggregates • 2 cyclings • polishing brushes with liquid injectors The edging is fully automated, which means that the height of the beam, pre-milling machines, rollers and all the settings of the cutter depending on the thickness of the material and the strip are adjusted on the main monitor. serial number: 0-200-19-0792, edge thickness: 0.3 - 3 mm, workpiece thickness: 8 -  ...

Read off operating hours: 10,537 h, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,250 x 2,300 mm, weight approx.: 3,000 kg

Description: Mostly made of steel Approx. Onsite Dimension. (l x w x h): 5,000 x 600 x 5,000 mm, weight approx.: 500 kg

For sale is the BUSETTI double-edge line, model F10, built in 2016, in excellent working condition. COMPOSITION OF THE LINE: POS. 1) BUSETTI F10 2600 POS. 2) REVERSE TRANSMISSION 2600X1600 POS. 3) BUSETTI F10 1600 POS. 4) ELECTRICAL CONTROL AND LINE MANAGEMENT PANEL • Max. width. Glass.. 2600 mm •Minimum. Width. Glass.. 200mm • Glass thickness . . 3 – 19 mm Velocity 0-8 m/min

Side table wood décor white approx. 60x120 cm, traces of use

Speed: 8.000 bph with 0,5 liter bottle. Different formats are possible optionaly. Dismanteling is made by Seegräber GmbH on begining februar 2018. List of machines included: -SIDEL SBO 6 Blowing machine. Completly overhault by SIDEL in 2006. -Preform magazin and preform elevator Compressor, cooling, moulds not included More then 300 machines new and second hand on our seema .de

Description: Type of edging Thin edge Thick edge Gluing System EVA Hotmelt Premilling Unit yes Corner Rounding Unit yes Max feed speed 11 m/min Maximum panel thickness 50 mm Operating Units 8 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 11 m/min Top pressure yes Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 No. Edge Processing Units 5 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2  ...

Description: Max. edge thickness 30 mm Max. forward feed speed 20 m/min Pressure with rubber belt Panel support guides , with positioning by NC , NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit Constructor model : 08.376 automatic timed intervention , motor power : 3 KW r.p.m. : 12000 RPM Edge coil magazine glue pot for EVA hot melt glue premelter for EVA hot melt glue no. pressure roller 9 with positioning by NC , NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 1.85 KW r.p.m. : 11500 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 1 KW r.p.m. : 11500 RPM NO. EDGE PROCESSING UNITS 4 Processing Unit : Corner rounding no. motors : 2 with positioning by NC , motor  ...

Description: Max. panel height 60 mm Max. edge thickness 3 mm Pressure with rubber belt NO. PANEL SIZING / MILLING UNITS Unit : pre-milling unit Constructor model : RT20 motor power : 2 KW r.p.m. : 9000 RPM Edge coil magazine no. positions 6 Gluing system yes glue pot for EVA hot melt glue premelter for EVA hot melt glue no. pressure roller 3 No. Edge Processing Units 5 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming Constructor model : IT90 no. motors : 2 motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming Constructor model : RS10 no. motors : 2 motor power : 0.75 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round Constructor model : RF10 no. motors : 2 motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 4 Processing Unit : edge scraping Constr ...

Description: Max. panel height 60 mm Max. edge thickness 3 mm Max. forward feed speed 24 m/min Top pressure , NO. PANEL SIZING / MILLING UNITS , Unit : pre-milling unit Constructor model : RT20 automatic timed intervention : , motor power : 2 KW r.p.m. : 9000 RPM Edge coil magazine , no. positions 6 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming Constructor model : IT90 no. motors : 2 motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming Constructor model : RS10 no. motors : 2 motor power : 0.75 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round Constructor model : RF10 no. motors : 2 motor power : 0.37 KW r.p.m. : 12000 RPM NO. EDGE PROCESSI ...

Description: Max. panel height 60 mm Min. panel length 130 mm Min. panel width 65 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Pressure with rubber belt No. Panel Sizing / Milling units , Unit : pre-milling unit Constructor model : R3 L20 motor power : 4 KW r.p.m. : 9000 RPM Lamps to preheat the side of the panel , Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for PUR glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units 10 Processing Unit : end trimming Constructor model : 8,42/39/B no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 Processing Unit : Corner rounding Constructor model : 08.342 Processing Unit : edge scraping Processing Unit : belt sanding Constructor model : 08.62 Processing Unit : belt sanding Const ...

Description: Max. panel width 3300 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Conveyor Track with dogs , Pressure with rubber belt NO. PANEL SIZING / MILLING , Unit : scoring unit motor power : 4.4 KW r.p.m. : 6000 RPM NO. PANEL SIZING / MILLING , Unit : double chipper, top and bottom Constructor model : 75.30 NO. PANEL SIZING / MILLING , Unit : miller hogger NO. PANEL SIZING / MILLING , Unit : miller hogger Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units , Processing Unit : end trimming Constructor model : 08.412 no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 no. motors : 2 Processing Unit : Corner rounding Constructor model : ...

Description: Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 5 mm Max. forward feed speed 12 m/min Pressure with idle wheels NO. PANEL SIZING / MILLING UNITS , Unit : pre-milling unit automatic timed intervention motor power : 1.8 KW Edge coil magazine yes glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , no. pressure roller 4 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.35 KW NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 0.65 KW NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.65 KW NO. EDGE PROCESSING UNITS 4 Processing Unit : Corner rounding no. motors : 2 motor power : 0.5 KW NO. EDGE PROCESSING UNITS 5 Processing Unit : edge scraping NO ...

Description: Type of edging Thin edge Thick edge Gluing System PUR Combination Squaring Edgebanding Machine First Pass Max Panel Width 3000 mm Max feed speed 40 m/min Operating Units Right Side 10 nr Operating Units Left Side 10 nr Min. panel height 8 mm Max. panel height 60 mm Min. panel width 240 mm Max. panel width 3000 mm Min. edge thickness 0.4 mm Max. edge thickness 3.5 mm Max. forward feed speed 40 m/min Top pressure yes Pressure with rubber belt Panel support guides yes No. Panel Sizing / Milling units Left Side 1 NO. PANEL SIZING / MILLING UNITS LEFT SIDE 1 Unit : double chipper, top and bottom Constructor model : KD 11 motor power : 4.5 KW r.p.m. : 6000 RPM Same technical characteristics on the left side yes Edge coil magazine yes no. positions 12 Gluing system yes glue pot for PUR glue yes premelter for PUR glue yes Roller set to press the edge yes No. Edge Processing Units 8  ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Premilling Unit yes Corner Rounding Unit yes Max feed speed 14 m/min Maximum panel thickness 60 mm Operating Units 8 nr Min. panel height 8 mm Max. panel height 60 mm Min. panel width 70 mm Min. edge thickness 0.3 mm Max. edge thickness 3 mm Max. forward feed speed 14 m/min Top pressure yes Pressure with idle wheels Panel support guides yes with positioning by NC yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Lamps to preheat the side of the panel yes Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes premelter for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 with positioning by NC yes No. Edge Processing Units 6 NO. EDGE PROC ...

Weinig Unimat 30 EL four-sided planer - German production - year of production 2001 - for wet wood - pneumatic cushion - counter reading 4808 h - DTR TECHNICAL PARAMETERS: - planing width 300 mm - planing height 200 mm - spindle diameter 50 mm 1 lower spindle 11 kW 2 right spindle 11 kW 3 left spindle 11 kW 4 upper spindle 11 kW cutter adjustable at an angle of 0.75 kW 5 lower spindle 15 kW 6 upper spindle 11 kW - jointer 7 lower spindle 7.5 kW - jointer - spindles with brakes - feed motor 7.5 kW - feed speed smoothly adjustable 6-36 m/min - four pull rollers in the tabletop - six upper steel pulling rollers - three upper rubber pulling rollers - feed on cardan shafts - pneumatic pressure - air cushion in the countertop - automatic central lubrication - minimum element length 700 mm - diameter of connectors 5 x 160 mm, 2 x 140 mm, 1 x 80 mm Machine di ...

KUPFERMUHLE four-sided planer with additional table, multi-saw 600x200mm - after technical inspection - German production - DOUBLE-SIDED PLANING HEIGHT 200 mm - ideal for wet wood - electric height adjustment - double feed chain - additional preliminary table with a 340 mm head - additional material feed systems TECHNICAL PARAMETERS: planing width 600 mm cutting height on both sides planing height on four sides 200 mm 100mm power of vertical spindle motors 2 x 5.5 kW lower shaft motor power 7.5 kW upper shaft motor power 11 kW engine power of the first head 4 kW multi-saw engine power 15 kW adjustable vertical heads four upper pulling rollers three lower pulling rollers two receiving pull rollers 4 knives per shaft, shaft diameter 145mm six types of feed speeds 7 / 9 / 11.5 / 14 / 18 / 23 m/min 2 rows of anti-kickback pawls spindle diameter 40 mm disc  ...

Side pastry filler / Berlin filler with 1 plunger NEW! Pastry filler / Berlin filler with 1 plungerfor filling doughnuts or pastries2 liter bowl with table attachmentDetails see picture

Description: Cantilever arm length 500 mm 4 side panels with 6 insertion levels each Without visible contents Approx. Onsite Dimension. (l x w x h): 900 x 3,000 x 800 mm, weight approx.: 280 kg

Description: Individual dimensions  ,2700 x ,800 x 3000 mm Cantilever arm length 500 mm Upright load 2000 kg Upright profile ,IPE 140 Cantilever arm type Medium 70 MM Without visible content Approx. Onsite Dimension. (l x w x h): 1,000 x 3,000 x 1,500 mm, weight approx.: 1,300 kg

Description: Permissible load per cantilever arm 700 kg, per shelf 2800 kg , without contents Approx. Onsite Dimension. (l x w x h): 6,300 x 2,980 x 2,000 mm, weight approx.: 1,500 kg

Description: Permissible load per cantilever arm 400 kg , without contents , Approx. Onsite Dimension. (l x w x h): 5,000 x 1,350 x 1,200 mm, weight approx.: 600 kg

Description: Permissible load per cantilever arm 550 kg, per shelf 3300 kg without contents Approx. Onsite Dimension. (l x w x h): 7,100 x 2,900 x 1,950 mm, weight approx.: 1,500 kg

Cantilever rack, heavy-duty rack -Cantilever rack: base field double-sided, 2 uprights -Cantilever arms: 4 per side, length 500 mm -Compartment height: variably adjustable -Quantity: 2x shelves available -Price per piece -Dimensions: 1180/1195/H2960 mm -Weight: 139kg / 140kg

Description: Min. edge thickness 0.3 mm Max. edge thickness 3 mm , Max. forward feed speed 25 m/min Pressure with rubber belt Panel support guides , with positioning by NC , Infeed panel alignment system , NO. PANEL SIZING / MILLING UNITS , Unit : pre-milling unit automatic timed intervention motor power : 3 KW r.p.m. : 9000 RPM Lamps to preheat the side of the panel , Edge coil magazine , glue pot for EVA hot melt glue premelter for EVA hot melt glue , Roller set to press the edge no. pressure roller 7 with positioning by NC , No. Edge Processing Units 7 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.8 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 1.5 KW r.p.m. : 12000 RPM , NO. EDGE PROCESSING UNITS 3 Processing Unit : Corne ...

Description: Max. panel height 50 mm Min. panel width 70 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 10 m/min Pressure with idle wheels Panel support guides NO. PANEL SIZING / MILLING UNITS Unit : pre-milling unit Edge coil magazine Gluing system glue pot for EVA hot melt glue Roller set to press the edge no. pressure roller 3 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.27 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : Corner rounding NO. EDGE PROCESSING UNITS 4 Processing Unit : edge scraping NO. EDGE PROCESSING UNITS 5 Processing Unit : glue scraping Control system PLC Safety standard CE mark Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight ap ...

Description: Max. panel height 55 mm Min. edge thickness 0.4 mm Max. edge thickness 12 mm Max. forward feed speed 13 m/min Pressure with idle wheels NO. PANEL SIZING / MILLING UNITS Unit : pre-milling unit automatic timed intervention motor power : 2.2 KW Edge coil magazine glue pot for EVA hot melt glue premelter for EVA hot melt glue Roller set to press the edge no. pressure roller 4 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 automatic timed intervention motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.55 KW r.p.m. : 11300 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : Corner rounding no. motors : 2 motor power : 0.4 KW NO. EDGE PROCESSING UNITS 4 Processing Unit : glue scraping NO. EDGE PROCESSING UNITS 5 Processing Unit : buffing no. motors : 2 motor  ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Max feed speed 9 m/min Maximum panel thickness 50 mm Operating Units 4 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 9 m/min Top pressure yes Pressure with idle wheels Panel support guides yes Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 No. Edge Processing Units 3 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.27 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : glue scraping Safety standard CE mark yes Total installed power 3.5 KW  ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Corner Rounding Unit yes Max feed speed 11 m/min Maximum panel thickness 55 mm Operating Units 7 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 8 mm Max. forward feed speed 11 m/min Top pressure yes Pressure with idle wheels Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes No. Edge Processing Units 5 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming Constructor model : HL 6130 no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim  ...

Description: • Double sided automatic tenoner with feeder • Serial number D227-C7 • Total installed power approx. 7.50 KW • Working length from approx. 180 mm up to approx. 1800 mm • Dimensions and inclination angles of the tenons: see photo number 35 • Tilting heads around the horizontal axis from -25 ° to +45 ° • Heads rotation around the vertical axis from -10 ° to +45 ° • Cutting shaft speed 9000 rpm • Each head has a motor with power 3 KW • Power opening motor 0.50 KW • BALESTRINI APS feeder Approx. Onsite Dimension. (l x w x h): 3,900 x 2,400 x 1,800 mm, weight approx.: 3,400 kg

Description: Four-Sided Planer - Falling Widths Overview: The four-sided planer with falling widths is a versatile and powerful machine for woodworking. With its ability to accurately process a wide range of workpieces, it offers efficiency and reliability for producing profiles and surfaces in woodworking applications. Key Features: Groove Bed Working Width: 15 - 230 mm Working Thickness: 10 - 150 mm 1st Horizontal Bottom Shaft: 7.5 HP - Min./Max. Tool Diameter 125-160 mm 2nd Shaft Right: 7.5 HP - Min./Max. Tool Diameter 125-200 mm 3rd Shaft Left, Automatic: 7.5 HP - Min./Max. Tool Diameter 125-200 mm 4th Shaft Right: 10 HP - Min./Max. Tool Diameter 125-200 mm 5th Horizontal Top Shaft: 10 HP - Min./Max. Tool Diameter 125-200 mm 6th Horizontal Bottom Shaft: 10 HP - Min./Max. Tool Diameter 125-200 mm Feed Speed: 6-24 m/min Infeed Table: 2500 mm Installation: Power Supp ...

Description: Max. machinable height 120 mm Maximum machinable width 230 mm Max. forward feed speed 12 m/min Min. machinable height 6 mm Maximum machinable height 120 mm Min. machinable length 370 mm Min. machinable width 25 mm Maximum machinable width 230 mm Max. forward feed speed 12 m/min Forward feed wheels yes No. rubberised wheels 1 No. toothed wheels 4 total number of wheels 5 Operator units 4: OPERATOR UNITS 1 Cutting shaft : bottom shaft diameter : 40 mm shaft length : 240 mm Motor power : 4 KW OPERATOR UNITS 2 Cutting shaft : Right shaft diameter : 40 mm shaft length : 240 mm Motor power : 4 KW OPERATOR UNITS 3 Cutting shaft : left shaft diameter : 40 mm shaft length : 240 mm Motor power : 4 KW OPERATOR UNITS 4 Cutting shaft : top shaft diameter : 40 mm shaft length : 240 mm Motor power : 4 KW Control system Siemens Simatic Panel Touch Safety standa ...

Description: - Lot of 9 double-sided loading trolleys - 6 x trolleys: dimensions 1680 x 1020 x 1930 mm per trolley, compartment dimensions approx. 1500 x 480 mm - 3 x trolleys: dimensions per trolley 1660 x 1020 x 1830 mm, compartment dimensions approx. 1500 x 480 mm - With 2 handles per trolley - 4 swivel wheels per trolley - Dimensions for transportation 8500 x 2100 x 1930 mm Approx. Onsite Dimension. (l x w x h): 8,500 x 2,100 x 1,930 mm, weight approx.: 900 kg

Cantilever rack, heavy-duty rack, single-sided cantilever rack, pallet rack -Cantilever rack: double-sided, 5 bays H/L/D 2500/5350/1340 mm -Cantilever arms: 6 levels / shelf height: adjustable -Cantilever arm length: 600 mm -Field load 3550 kg -Quantity: 2x shelves available -Price per piece -Total weight: kg

Description: BENZ Single sided angle head MONO R Sawing and Snipping Unit Type of aggregate: Single sided angle head with reduced RPM type MONO R Product Line: Classic Line (grease lubrication) Tool outlet: 1x saw blade alignment Ø30 mm (fixation with flange by 2 pins Ø6 mm on pitch diameter 42 mm or by four M5-screws on pitch diameter 45/52 mm without using the flange) Weight 5.5 kg max. drive torque M2 25 Nm max. drive speed n2 8000 1/min Transmission ratio (n1:n2) 1:0.8 The price is only valid for aggregates with standard interface with HSK-F63 interface and the torque supports for the following machines: Biesse, Busellato, Felder, Hiteco, HOMAG, IMA, Masterwood, Reichenbacher, SCM 1 point, SCM 3 point, Weinig. Further torque supports on request. The unit can be delivered with different machine connections. After the purchase please let us know which machine connection / torque  ...

Single sided edge banding machine Brand: IMA Type: COMPACT PC-6220 F Year: 2000 Left hand machine Workpiece transport via a driven transport chain and adjustable top pressure Beckhoff control Need of space LxWxH mm: 7400x1500x2000mm Weight: approx. 3600kg Technical data: Edge material: a) Veneer/coil and strip ware, b) PVC/coil and strip ware c) Solid wood strips min. edge height = approx. 14 mm max. edge height = approx. 55 mm min. edge tickness = approx. 0,4 mm max. edge thickness = approx. 20 mm min. panel thickness = approx. 10 mm min. panel thickness = approx. 16 mm at use of the multi function unit max. panel thickness = approx. 50 mm min. panel width = appprox . 60 mm min. panel length = approx. 150 mm max. strips = approx. 20x50 mm Panel supernatant from the chain conveyor = approx. 35 mm Pneumatic connection: approx. 7 - 8 bar The basic  ...

eins. Kantenanleimmaschine Fabrikat: IMA Typ: Novimat Systems/I/G80/1000 Baujahr: 2011 Linksmaschine Vorschub 6-30 m/Min. Technische Daten: Werkstück Länge min. 150 mm Breite 150 - 2000 mm Dicke 10 - 50 mm Gewicht max. 50 kg Werkstoff: Spanplatte, MDF Kantenmaterial Rollenmaterial 0,8 - 3 mm Kantenhöhe 22 - 54 mm Kantenlänge min. 250 mm Ausstattung Verstellachse für Einlauflineal Einzugsvorrichtung Formatbearbeitungsaggregat zum Schutzfräsen Formatbearbeitungsaggregat zum Fertigfräsen (2 Motore, Gleich-/Gegenlauf) Verleimaggregat VTG (Ausführung nur mit Dioden-Laser) Kappaggregat 08.42 (2 Motore) Fräs-/Fasggregate (2 Motore, oben/unten) Mehrfachbearbeitungsaagregate 08.355 - 08.355 Ziehklingenaggregat Schwabbelaggregat Hinweis: Die technischen Daten und Beschreibungen sind Abschrift der damaligen Auftragsbestätigung. Daten dienen zur Inf ...

Single-sided edge banding machine Make: HOMAG Type: KAL 210 AMBITION 2264 Year of construction: 2014 One-sided edge banding machine for editing of straight workpiece edges and for gluing and post-processing in the longitudinal and transverse pass. Overview of aggregate equipment: - Separating agent spray unit - Joining milling unit - Gluing unit A20 with 2 rolls - end trimming unit HL84 - Pre-milling unit BF10 - Form milling unit FK11 manual - Profile scraper PN10 - Finishing unit Feed 18 - 25 m/min. Feed max. with FK11 20 m/min. Working height 950 mm Pneumatic connection 6 bar Total length 7845mm Workpiece thickness 8 - 60 mm Edge height max. = workpiece thickness + 4 mm Edge material roll 0.3 - 3 mm Edge material strips 0.4 - 20 mm Aggregate equipment: - Separating agent spray unit top/bottom - Joining milling unit 2 motors each 3 kW, 150 Hz ...

Pressure total: 160 ton Stroke: 500 mm Daylight: 710 mm Free frontal opening L-R: 820 mm Free lateral opening F-B: 320 mm Table surface area : 800 x 630 mm Slide area: 800 x 630 mm Table height over floor: 800 mm Die cushion capacity in table: 63 ton Die cushion stroke: 200 mm Die cushion pad area: 630 x 450 mm Approach speed: 400 mm / sec Working speed: 17 - 45 mm / sec Return speed: 230 mm / sec Required power: 30 kW Weight of machine approx.: 13,6 ton

Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7

Dear Ladies and Gentlemen, We now have used transformer stations available Year of construction : 2004 Power : 1000KVA Primary voltage : 20kV Secondary voltage: 400V, Groupset: DYN5 Switchgear: SF6 Station Dimension : Length: 250 cm Width: 240 cm Height: 245 cm Weight: 11 ton At call Nationwide cheap delivery. If you have any further questions, please do not hesitate to contact Mr. Schmidt. Available Monday to Saturday from 8 a.m. to 8 p.m. CLOCK and in case of emergencies 24 hours

Surface-mounted luminaire, industrial lamp, wall and ceiling lamp SCHREIBER KH 400-HME ( KH400-HME ) Article number: 670 740 400 W 230 V AC 50 Hz New ! Dimensions: 430 x 185 x 600 mm

Surface-mounted luminaire, industrial lamp, wall and ceiling luminaire, with emergency luminaire SCHREIBER KH 400-HME ( KH400-HME ) Article number: 670 740 400 W 230 V AC 50 Hz New ! Dimensions: 430 x 185 x 600 mm

Control box, pre-wired PAGUS 400 x 400 x 200 mm 4x push button 1x toggle switch 4x indicator lights 1x power contactor 1x power contactor with auxiliary switch and thermal motor contactor 3x miniature circuit breaker control box: 400 x 300 x 200 mm used, checked! Dimensions: 420 x 300 x 240 mm

Clamping plate, clamping table, T-slot grid plate PAGUS Working area: 400 x 400 mm Working height: 60 mm Groove width: 14 / 24 mm Dimensions: 400 x 400 x 60 mm

Pneumatic cylinder FESTO DNGU-32-400-PPV-A S3 158098 stroke: 400 mm rod diameter Ø 12 mm Dimensions: 545 x 95 x 50 mm used tested.

grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm working height: 115 mm all threads on clamping surfaces M12 x 1,75 Pitch: 50 mm holes ( top ): Ø 20 / 50/55 mm holes ( bottom ): 2x Ø 25 mm width guide ( bottom ): 160 / 200 / 300 mm Height guide (bottom): 55 / 30 / 65 mm spare part for machining center HECKERT CWK400 ! used, tested ! Dimensions: 550 x 400 x 115 mm

grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm Working height: 92 mm all threads on clamping surfaces M12 x 1.75 holes (top): Ø 20 / 50 mm holes (bottom): 1x Ø 32 mm, 2x Ø 25 mm, 3x Ø 18 mm bore with driver: Ø 130 / 200 mm holes (holder): 2x Ø 36 mm used, tested ! Dimensions: 490 x 400 x 95 mm

Grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm Working height: 92 mm all threads on clamping surfaces M12 x 1.75 holes ( top ): Ø 20 / 50 mm fixing bolt ( top ): Ø 50 x 10 mm holes ( bottom ): 1x Ø 32 mm, 2x Ø 25 mm thread (bottom): 4x M16 x 2.0 bore with driver: Ø 130 / 200 mm holes (holder): 2x Ø 36 mm spare part for machining center HECKERT CWK400 D ! used, tested ! Dimensions: 490 x 400 x 105 mm

Pneumatic cylinder, standard cylinder, double-acting FESTO DNC-63-450-PPV-A 163400 stroke: 450 mm piston diameter: Ø 63 mm rod diameter: Ø 20 mm rod thread: M16 x 1.3 5, Length: 30 mm pmax: 12 bar used, tested ! Dimensions: 645 x 74 x 74 mm