plan used for sale

Second-hand Weinig high-performance planer, model Hydromat 17BL, for professional woodworking. The machine has ten spindles and is suitable for industrial planing and profiling of timber. With a working width of 170 mm, a working height of 120 mm and a feed rate of 60 m/min, it is designed for high-performance continuous processing. Technical data: Spindles: 10 Spindle 1: Bottom / 7.5 kW / 50 mm Spindle 2: Right / 7.5 kW / 50 mm Spindle 3: Left / 7.5 kW / 50 mm Spindle 4: Right / 7.5 kW / 50 mm Spindle 5: Left / 7.5 kW / 50 mm Spindle 6: Top / 11 kW / 50 mm Spindle 7: Bottom / 7.5 kW / 50 mm Spindle 8: Top / 7.5 kW / 50 mm Spindle 9: Bottom / 7.5 kW / 50 mm Spindle 10: Universal / 7.5 kW / 50 mm Working width: 170 mm Working height: 120 mm Feed rate: 60 m/min Feed motor: 15 kW Table: Hard-chromed Condition: Gebraucht Location: Tauberbischofsheim, Germany

Offered is a combined Weinig/Alfred Harbs planing and profiling line for woodworking. 1) Weinig Unimat 23 E planer/moulder, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 78A, main fuse: 80A, power: 34kW. 2) Weinig Uniplan fine finish/hydro planer, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 42A, main fuse: 50A, power: 17kW. 3) Weinig UC 10, year of manufacture: 1996. 4) Alfred Harbs K6V, year of manufacture: 1992. Including additional associated components and transport equipment. An on-site inspection is possible.

max. ram stroke: - mm throat: - mm table diameter: - mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ex-proofed solvent preparation station made of stainless steel. The station consists of: -> 3 pcs. compressed air driven diaphragm pumps -> stainless steel solvent tank -> drip pan made by Denios -> ex-proofed agitator and stainless steel reactor -> stainless steel piping

CURRENTLY I can offer you this HM 4 Industry planer from Hundegger. FREE Dec. 26 The high-performance plane from Hundegger! A used HM 4 planing machine from HUNDEGGER HM-400 2008 with the entire mechanization to the left and right of the HM4 planing machine for 16 m of timber lengths, as shown in the photos. 4 x 11KW planing motors. 4 x bevel unit. Fully automatic cross-section measurement Sale as seen from site in assembled condition without warranty and guarantee, without dismantling. Price 69,000 euros net

The 6-station cleaning machine was part of a lens processing process. As an intermediate process, it took over the necessary cleaning of the transport containers, The cleaning process was carried out fully automatically from the loading station to the removal station. This function (station 1 and 6) can no longer be operated, because the systems conveyor belt is no longer available. - Station 2: post-cleaning with ultrasound in heated cleaning liquid. - Station 3: Rinsing with heated rinsing liquid, blowing off the residual liquid. - Station 4: pre-drying with heated air. - Station 5: Post-drying with heated air. - Control: Siemens SPS S7-200

Second-hand Weinig Profimat 23 E automatic planing and moulding machine for four-sided planing and profiling of timber, with a long dressing table. Technical data: Spindle 1: Bottom / 4 kW / 40 mm Spindle 2: Right / 40 mm Spindle 3: Left / shared motor with #2 / 40 mm Spindle 4: Top / 5.5 kW / 40 mm Spindle 5: Bottom / 4 kW / 40 mm Spindles: 5 Working width: 230 mm Working height: 120 mm Feed: 2.2 kW Planing table length: 2,500 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Multihead weigher with automatic packaging machine. The plant is in mint condition. Viewing: by arrangement Material: Stainless Steel Bag length: 450 - 800 mm Bag width: 150 - 300 mm Weight of packing machine: 800 kg Packing speed: 30 - 70 bags/min Control: Siemens Smart Line Electr. Total power: 2.2 kW Total weight: 1,300 kg Disassembly: by buyer or on request

Key data: 27 mm, 36 , 1200 U/min

Warehouse – No. 2875 1 used, in 2026 Partially overhauled and function-tested compounding granulation line, consisting of: Brabender grav. Dosage 2-components (expandable, optional vs. surcharge) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 control stand-alone Extruder Twin Screw Leistritz Type ZSE 27 HP Synchronous, seal-combing, segmental screw and barrel with intensive cooling. Screws 2x Ø 27 mm- 36 L/D with 8 cylinder zones with 3x degassing zones, 1x vacuum pump 1.5 kW Screw speed up to 1,200 rpm.-1 – adjustable Extruder drive 33.8 kW - Heating capacity 9.8 kW installed Mass pressure sensor Control Macromatex III MAAG Gala Underwater Pelletizer Type LPU Model SLC 5, incl. Polymer start-up valve with hydraulics Perforated plate 20°, granulator SLC 5 with drive 1.5 kW Water Box - Temperate water system with Granule Centrifugal Dryer Type 1150, Driv ...

working width: 510 mm; cutter head: strip knive; number of blades: 2; surface table length: 2600 mm; adjustment table: hydraulic; Hollow and pointed joints adjustment: ja; read out table hight: Scala; read out Hollow and pointed joints: Scala; fence tilting: yes; motor power: 5,5 kW; motor brake: yes, automatic; machine length: 2600 mm; machine width: 1000mm; weight: 1050 kg;

planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron - The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position - Large precision aluminium dressing fence, slightly tiltable 90 - 45 ° - The inclination of the stop is easily readable from the operator side - As standard with auxiliary stop for safe planing of even narrow workpieces - Large four-knife shaft, precision-mounted - Quiet running with precision aggregate and heavy cast iron execution -  ...

working width: 180 mm; working height: 120 mm; working spindles: 4; spindle following: down, right, left, up; motor power spindle down: 3,7 kW; motor power spindle right: 3,7 kW; motor power spindle left: 3,7 kW; motor power spindle up: 5,5 kW; adjustment spindle down: -; adjustment spindle right: -; adjustment spindle left: manual; adjustment spindle up: electric; cutter heads: turn cutter; feed speed: 2; feed pressure: feather; current consumption: 38 A; motor brake: automatisch; suction connection: machine length: machine width: weight:

working width: 520 mm; working height: 250 mm; cutter head: strip-knive; number of blades: 4; height adjustment: electrically; read out workpiece thickness: scale; feed speed: 2 speeds; infeed roller: steel; outfeed roller: steel; table roller: yes; motor power: 5,5 kW; suction connection: 140mm; machine length: 1200 mm; machine width: 1400 mm; weight: ca. 900kg;

working width: 510 mm; maximum workpiece thickness: 250 mm; kutter head: Tersa; number of blades: 4; adjustment table: electrical; read out workpiece thickness: digital; feed speed: variable; feed roller: rubber; outfeed roller: rubber; table roller: no; motor power: 7,5 kW; suction connection: 160mm; machine length: 1200mm; machine width: 1200 mm; weight: 1000kg;

working width: 530 mm; cutter head: Leitz - Centrofix; number of blades: 4; surface table length: 2900 mm; adjustment table: Hebel; read out out table height: Scala; surface fence tiltable: ja; motor power: 4 kW; machine length: 2900 mm; machine width: 1000mm; weight: 800 kg;

working width: 500 mm; cutter head: Leitz - Centrofix; number of blades: 4; surface table length: 2800 mm; table adjustment: lever; read out table height: scala; sourface fence adjustable: yes; motor power: 5,5 kW; machine length: 2800 mm; machine width : 1000mm; weight: 900 kg;

working width: 500 mm; cutter head: strip knive; number of blades: 4; surface table length: 2700 mm; adjustment surface table: Hebel; read out: table height; fence tilting: yes; motorpower: 4 kW; motorbrake: yes, automatic; machine length: 2800 mm; machine width: 1000mm; weight: 1050 kg;

GE LM6000 PD Sprint, 46MW, 11,500v. 50 Hz. Natural Gas Turbine-Generator One (1) Complete Power Plant with an GE LM6000 PD Sprint, 46 MW ISO, 11,500v. 50 Hz. Cogeneration, Natural Gas Turbine Generator. Equipment Description Gas Turbine Generator Set: 2009 Manufactured/2021 engine exchanged - GE LM600 PD Sprint Triple annular combustor Condition: Engine exchanged by GE in March 2021 with factory refurbished unit. Last GE borescope (Dec. 2024) released the engine for operations, nevertheless, the engine is at the GE recommended HSE interval Generator: Brush BDAX 7-290ERJT - 50.8 MW/ 63.5 MVA, 11,500v. 50 Hz. 0.8 P.F. Gear Box: Lufkin NFVQ2419-D, ratio 1.209: 1 HRSG: DKME Korea DKS2107H01 - 52 t/hr. 103 barg, 313°C, single pressure, natural circulation Gas Booster Compressors: 2X Ariel JGC/4 NGBC-A 97,280 Hrs., NGBC-B 5,800 Hrs. Gas Circuit Breaker: ABB 4000A, 11 KV ...

Second-hand automatic planing and grooving machine, part of a Weinig Hydromat 2000 pre-planing line, with feed mechanism (tilting destacking). The machine has already been dismantled and is ready for loading. The images contain AI-generated sample images for illustrative purposes. The illustration may contain errors. Technical data: Spindles: 5 Spindle 1: Bottom / 11 kW / 50 mm / 6,000 rpm Spindle 2: Left / 11 kW / 50 mm / 6,000 rpm / Jointer Spindle 3: Top / 18.5 kW / 50 mm / 6,000 rpm / Jointer Spindle 4: Bottom / 11 kW / 50 mm / 6,000 rpm / Jointer Spindle 5: Right / 11 kW / 50 mm / 6,000 rpm Working width: 175 mm Working height: 80 mm Feed: 15 kW / 100 m/min Control: CNC memory system Max. workpiece length: ~ 6,000 mm Condition: Gebraucht Location: Prag, Tschechien

Design: modular containerized system, process: continuous pyrolysis/thermochemical carbonization, reactors: 2, feedstocks: wood/landscape maintenance material/biomass, thermal output: approx. 150kW, biochar production: approx. 300t/year, operating mode: autothermal, flue gas recirculation: available, burner: FLOX, discharge: water-cooled and airtight, degree of automation: fully automatic, control: Siemens S7-300, operator panel: Siemens TP1200 Comfort, automatic mode operating hours: approx. 7069h. Process container dimensions X/Y/Z: approx. 9000mm/3000mm/2800mm, process container weight: approx. 14t, flue gas treatment container dimensions X/Y/Z: approx. 3000mm/3000mm/2800mm, flue gas treatment container weight: approx. 4t. Including Bruns walking floor container with approx. 30m³ dosing hopper, inclined screw conveyor, bagging station and conveying spirals. A drying system for wood c ...

Number of spindles: 9 St. Working width: 240 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 7,5 kW Working speed: 6-36 m/min weight of the machine ca.: 6500 kg Control: CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015, currently undergoing partial recondtionning in stock ------------------------------------------------------------ Summary: - 9 spindles (including 4 x HSK 85 S) - Electronic horizontal and vertical positioning - 8,300 rpm - SCM Set-up - SCM T-Set - Includes workpiece infeed magazine Working dimensions: - Maximum working width: 240 mm - Minimum working width: 25 mm (reducible to 15 mm via installed special kit) - Maximum working height: 120 mm - Minimum working height: 10 mm (reducible to 6 mm via installed special kit) Special working cross-section equipment: Equipped with a special kit for extremely small minimum cutting dimensions o ...

1.0 GML 1400 Planer Head Grinding Machine Fully automatic planer head grinding machine with variable carriage feed, automatic pitch and automatic delivery of the acceptance. TECHNICAL DATA Tool diameter: 160 - 360 mm Grinding length: 1,380 mm Graduation: (even number of blades) 2 - 40 Z additional 1, 3 and 5 knives selectable Grinding motor power: 1.0 kW Speed of the grinding wheel, adjustable: 3,000 - 6,000 rpm. • For grinding LEDINEK planing shafts as well as hydraulic planing heads, • Adjustable mounting brackets for shafts with different bearing distances, • Control console with 7.0" touch screen LENZE • Touch screen resolution (pixels) 800x480; Graphics, TFT Color • Input of the clearance angle α the planer blade via fixed value or calculates average β and γ, • Adjustable pressure on the guide ruler, • Dynamic calculation of the remaini ...

Working width: 410 mm Length of the planing table: 1450 mm Number of knives: 4 St. Motor output: 4 kW Dimensions (L/W/H): 2650x850x1100 mm weight of the machine ca.: 750 kg SCM Surface planer F 410 N ----------------------------- Technical manufacturers description: Planing width: 410 mm Total table length: 2600 mm Table height: 855 mm Feed table length: 1450 mm Aluminum planing fence swivels up to 45° Planing fence dimensions: 1100 x 170 mm 4-knife planing shaft diameter: 120 mm Knife shaft speed: 5000 rpm Motor power: 4 kW TERSA monobloc one-way reversible cutterhead SCM dressing protection device integrated in machine stand 120 mm diameter extraction nozzle Manual star-delta switch Motor protection switch, undervoltage release Lockable main switch Automatic motor brake Pivoting auxiliary fence ----------------------------- Price of the above machine on request! ---------------------- ...

Number of spindles: 6 St. Working width: 230 mm Working height: 150 mm Length of the planing table: 2000 mm Feed motor: 5,5 kW Feed speed: 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----------------------------------------------- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----------------------------------------------- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ------------------ Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left -------------- ...

Number of spindles: 8 St. Working width: 230 mm Working height: 120 mm Weinig Planing and moulding line ------------------------------- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

N. 06 INOX CRELL - MORE STEAM BRAND BABCOK WANSON

grinding length: mm grinding width: mm workpiece height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Four-sided woodworking planer and moulder with five machining spindles, powered feed rollers and an extended infeed table with side guide. Equipped with adjustable spindle assemblies, mechanical position indicators, pneumatic feed-roller pressure cylinders and individual extraction hoods with flexible hoses. Enclosed machining area with lifting access covers, inspection windows and internal lighting. Front adjustment handles, push-button controls, emergency stop, rotary main switch and separate control console. LEADERMAC and ITALPRESSE markings. Auction-ID: A1-50699-45

Key data: 4 , 220 mm, 120 mm

Four-sided planer Guilliet Type KXR Built in 1990 Planing width maximum 220 mm Planing height maximum 120 mm Input table length approx. 2000 mm 4 planer heads, aluminium planer heads Motor strengths approx. Dressing shaft 5 kW Right and left wave together 5 kW Upper shaft 5 kW Feed speed infinitely variable 4.5 – 27 m/min. Feed motor 1.5 kW Spindle diameter 40 mm Planer head diameter 120 mm Weight approx. 1800 kg Dimensions approx. 3400 mm x 2300 mm x H 1900 mm

Manufacturer & Model: Manufacturer: Gubisch (Made in West Germany) Model / Type: GN 147 Year of Manufacture (Baujahr): 1972 Machine Serial Number (Masch.Nr.): 1394 Electrical Specifications: Voltage (Spannung): 380 V Frequency (Frequenz): 50 Hz Connected Load / Power (Leistungsaufnahme): 33.0 kW Machine Configuration & Features: Type:industrial automatic four-side moulder and planer / multi-spindle profiling machine. Construction: Solid heavy-duty cast iron chassis. Processing Stations: Multi-spindle setup powered by independent electric motors. Infeed System: Extended alignment/infeed table with side guide and roller feed drive system. Controls: Integrated control console with push buttons, selection switches, and emergency stop button. Adjustments: Mechanical handwheels for spindle and guide adjustments. Dust Extraction: Multiple flexible suction hoses connected to top processing stati ...

Key data: 410 mm, 240 mm, 3 kW

GRIGGIO FS 410 - Year of construction 2001 - Immediately available

SCM ‘Profiset 60 EP’ four-sided planer, in as-new (second-hand) condition, for professional use in woodworking. The machine was only switched on once for a test run and has never been used since. Technical data: Spindle 1: Bottom / 4 kW / 40 mm Spindle 2: Right / 5.5 kW / 40 mm Spindle 3: Left / shared motor with #2 / 40 mm Spindle 4: Top / 4 kW / 40 mm Spindle 5: Universal / 4 kW / 40 mm Spindles: 5 Working width: 230 mm Working height: 120 mm Feed: 3 kW Planing table length: 2,000 mm Condition: Neuwertig Location: Tauberbischofsheim, Germany

Weinig Unimat 23 E + Uniplan 23 planing line, including a return conveyor. An NC-controlled line for planing and profiling window scantlings, including glazing bead cutting or other planing tasks, with automatic return of the workpieces to the operator. Technical data: Spindles: 4 + 2 Working width: 230 mm Working height: 120 mm Spindle 1: 7.5 kW / 50 mm / 8,000 rpm Spindle 2: 11 kW / 50 mm / 8,000 rpm Spindle 3: Shared motor with spindle 2 / 50 mm / 8,000 rpm Spindle 4: 7.5 kW / 50 mm / 8,000 rpm Spindle 1 Uniplan: 5.5 kW / 50 mm / 7,200 rpm Spindle 2 Uniplan: 5.5 kW / 50 mm / 7,200 rpm Feed rate: 5–24 m/min Control: Nexus PC control NC axes: Unimat 2 & 3, Uniplan 1 Condition: Gebraucht Location: Tauberbischofsheim, Germany

Weinig Profimat 23 automatic planing and moulding machine for four-sided planing and profiling of timber, with a mobile spindle. Technical data: Spindles: 5 Spindle 1: Bottom / 5.5 kW / 40 mm Spindle 2: Right / 5.5 kW / 40 mm Spindle 3: Left / shared motor with #2 / 40 mm Spindle 4: Top / 7.5 kW / 40 mm Spindle 5: Bottom / 4 kW / 40 mm Working width: 230 mm Working height: 120 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Used PAOLONI combined planer and thicknesser (surface planer / thickness planer). Condition: Used, in working condition Auction-ID: A7-50988-151

AI Overview, A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3], Core System Components & Description, Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters):, Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube., Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes., Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid ...

Used combined planer-thicknesser machine, suitable for woodworking shops and small businesses. Combines planing/jointing and thicknessing functions in one machine, reducing required workshop space and number of machines. Brand, exact technical specifications (working width, motor power) and current operating condition not confirmed for this specific unit — please contact us for details. Auction-ID: A7-50988-90

Masonry Aging System The Masonry Aging System creates uniquely aged faces and backs for standard, architectural, and retaining wall units. The aging process is totally random and adjustable. A variety of aged looks can be created by altering the speeds of the impactor heads, the rotation speeds of the clamps, and the amount of time the unit is held under the impactor heads. Video on request.

Used combined woodworking machine: surface planer and thicknesser with integrated boring unit, working width 400 mm. It combines surface planing (jointing) and thicknessing of timber with drilling in a single machine, reducing the space and number of machines needed in the workshop. Brand, exact model, weight, motor power and year of build are not confirmed for this specific unit - please contact us for details. Serviced and ready to work without any problems Auction-ID: A7-50988-31

Used economy-type woodworking surface planer (jointer) for smooth, flat planing of timber surfaces. Suitable for small joinery shops and workshops. Brand, exact model and technical specifications (planing width, weight, motor power) are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-29

Used Italian-made Casadey D410 surface planer (jointer) for professional use in joinery shops and wood-processing industry. Planing width 410 mm with 4 knives, table length 2.50 m, motor 3 kW / 380 V, dust extraction outlet 150 mm, tilting side fence. Fully checked by our specialised technical team. Weight, dimensions and year of build are not confirmed for this specific unit - please contact us for details. Fully checked by our specialised technical team Auction-ID: A7-50988-27

Used economy-type woodworking surface planer (jointer) for smooth, flat planing of timber surfaces. Suitable for small joinery shops and workshops. Brand, exact model and technical specifications (planing width, weight, motor power) are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-30

Used SICAR FB 400 surface planer (jointer) for woodworking. • Heavy-duty surface planer with long tables and a fence supporting the workpiece. Used to produce a flat, straight reference surface on boards and battens before further processing. • Brand: SICAR, model FB 400. • Planing width: 400 mm. • Table length: 2440 mm. • Rebate depth: 20 mm. • Cutterblock diameter: 120 mm, 4600 rpm, 4 knives (400 x 30 x 3 mm). • Motor power: 4 HP. • Fence tilts up to 45°. • Net weight: 590 kg. Dimensions: 2500 x 720 x 1040 mm. • Specifications are those of the model as given in the manufacturer's leaflet. Please contact us for further details, e.g. supply voltage. • Condition: has not been in operation for several years; inspection and testing are required before use. Auction-ID: A7-50988-133

Spiral rabbet (rebate) cutter for planer / jointer machines, reference 0940013ERP. Brand and dimensions are not stated in our catalogue. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-55

Fully reconditioned (completely rebuilt) 6-function combined woodworking machine Sovrana 2100, Italy. Planer: width 42 cm, 3 knives, tilting angle fence with 2 compass-type arms. Thicknesser: height 20 cm, width 42 cm. Two-speed motor switch, reduction gearbox. Mortising attachment with slides and taper chuck (chuck with jaws and key possible at extra cost). Spindle moulder: spindle shaft 50 mm, 2 rotation speeds on the motor, 4 HP / 380 V. Saw disc diameter 30 cm with height adjustment by worm screw and gear; sliding carriage 80 cm with guide for mitre cuts. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-81

Machine name: Polymer plant Manufacturer: Alltech Type: Polymat 4000E Year of Make: 2002 Drive motor: 3 x 0.37 kW Content: 4000 liters Material: Polypropylene Conveying / dosing of: powdered granules and liquid polymer concentrates Capacity: 1000 - 4000 L/h # Chamber: Three-chamber flow system Dimensions: L 2800 x W 1600 x H 2900 mm Curb weight: 400 kg Tech. Documentation: Yes Remark: Water supply with 6 m³/h at 3 bar Accessories: Dry doser, 2 x progressing cavity pump Condition: Used Price: On request

USED MONNET FILTRATION UNIT Equipped with 1 Paper Filter Coolant Pumps 1 Magnetic Conveyor Dimensions and weight 2100x1500xH1800mm- weight 400 kg Auction-ID: A1-50950-52

USED MONNET FILTER UNIT Serial No.: 2021.003 MEU Year: 2021 Equipped with 1 Paper Filter Sprinkler Pumps 1 Magnetic Conveyor Dimensions and Weight 2100x1500xH1800mm- Weight 400 kg Auction-ID: A1-50950-50

USED MONNET FILTRATION UNIT Equipped with 1 Paper Filter Coolant Pumps 1 Magnetic Conveyor Dimensions and weight 2100x1500xH1800mm- weight 400 kg Auction-ID: A1-50950-51

Four-sided planer Working height: 740-750 mm Max working width: 305 mm Min working width: 50 mm Max workpiece height on 2 sides: 310 mm Max workpiece height on 4 sides: 160 mm Min workpiece height: 17 mm Feed speed steplessly adjustable: 10-60 m/min motors: bottom 11 kW, top 11 kW, right 7.5 kW, left 11 kW feed motor: 7.5 kW motor height adjustment: 1.5 kW speed 5,500 rpm driven top and bottom feed rollers