plan used for sale

Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30

Comexi solvent-free laminating system Coating width = 1320 mm , Speed = 350 m/min, With 2 unwinders (turnstile) With 1 rewinder (turnstile) With Doypag vario mixer. Mixing plant 4 heaters Pre-treatment AFS corona type. G 60 S,

max. ram stroke: 230 mm throat: 230 mm table diameter: 0 mm are offered : 2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 1250 1x overhauled new 1x has to be overhauled. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used KRONES carbonated drink bottling line – capacity: approx. 7,000 bottles/h • Bottle formats: 330, 500, 700, 750, 900, 1000 ml • The line worked with cider, sparkling wine and champagne. • Possibility of pouring beer in a returnable/non-returnable bottle • Possibility to check and run the line before purchase. Available immediately. The line includes: 1. Bottle unloader for returnable bottles Kettner 1989 (Kontipack E) 2. Krones returnable bottle washer from 1988 Type 150/10-110 3. Krones VKV40/SV10/KK filler from 1988 - 40 fillers with ALCOA capping machine 4. Krones capping machine 5. Bottle capping machine ADELSKI PP2010, 2007 (Adelski) 6. Manual cork presser 7. Installation for Velcorin 8. Wire insertion machine (Nortan, Minerva 80-120, 1995) 9. Machine for applying gold (Nortan, Prisma 80:s, 1994) 10. Labeling machine + banderole (Krones Taxomatic, KES -  ...

Used STORK 0.75 l non-carbonated bottling line – capacity approx. 8,000 bottles / h • Bottle formats: 750 ml • The line poured still/still hot wine. • Possibility to check and run the line before purchase. • Available immediately. The line includes: 1. Bottle unloader for returnable bottles Kettner 1988 (Konti- Auspacker) 2. Label ripper 3. Krones returnable bottle washer (KES 1-3-212, 1992) 4. Soda lye detector (Michael Horst, miho LC2000 5. Stork pouring machine (VD48/8, 1978), 48 pourers 6. AROL – SATURNOR12T600 capping machine, 1991 7. Rolex automatic closing machine (type: SWK-800 from 2001) 8. Plate pasteurizer 9. Manual presser 10. Banding machine (KRONES, Taxomatic, 1995) 11. Bottle loader into crates (Kettner, Konti-Einpacker, 1988) 12. Transporters 13. Control cabinets 14. Documentation

Weibert fs 52es TERSA digital Dressing thickness planer Planing width 520mm Tersa 4 Knife Shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm Electric height adjustment of the thickness table 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503511

Used bread line GLIMEK -In good bakery condition- - Dough divider GLIEMEK SD-180 with XL funnel - Intermediate oven IPP840-008 - Long caster GLIMEK M0671 - Rounder - Capacity: approx. 1,500 pcs./h The plant has only been running for 10 years and only in the summer season. Out of service since 2017. Viewing and test run are possible by arrangement.

PENSOTTI plane 2050x1600 BENCH 9 m. Hydraulic transmission Visible in operation.

- Complete system - incl. conveyor belt width 2400 mm with NEW CONVEYOR BELT - Incl. discharge hood with separating parting - INCL. BLOWER FOR FOIL SORTING - incl. SOFTWARE UPDATE FROM PELLENC - incl. COMPLETE OVERHAUL IN OUR SPECIALIST WORKSHOP IN D-59329 WADERSLOH - incl. COMPLETE DOCUMENTATION - YEAR OF CONSTRUCTION 2015

Qty. 1 Second-hand steel strip production plant The plant consist of below lines: 20-High Sendzimir Mill Mfc.: Waterbury Farrel Built: 1960 Strip width: 330 – 660 mm Thickness Entry: 4.0 mm Exit: 0.076 mm 2-High Temper Pass Mill Mfc.: United Eng. & Foundry Co. Built: 1960 Strip width: 400 – 630 mm Thickness Entry: 1.6 mm Exit: 0.25 mm Tension Leveller Mfc.: TBA Built: 1982 Strip width: 500-1067 mm Thickness: 0.08-0.3 mm Tensile strength: 30-75 kg/mm² Bright Annealing Furnace Mfc.: Salem & Herr Equipment Built: 1960 Strip width: 150 – 610 mm Thickness: 0.254 – 2.7 mm

We sell a tape rounder from Gostol Gopan. The effective path is over 3m ! The machine is overhauled.

Weibert WJ-FS32-W7 Dressing thickness planer 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables G&2972-2036-W7

1 of used glass bottling line for still and carbonated water Used for glass bottles 330 ml (D 61,3 x H 207,9 mm), 750 ml (D 78,0 x H 294,9 mm) and 1.000 ml (D 88,3 x H 318,7 mm) at speeds (limited by filler capacity) between 6.000 (1.000 ml) and 10.000 (330 ml) bph., mostly new 2000, plcs: Modicon, consisting of Ave Alta Meccaniche DBR50 bulk-bottle depalletizer, AVE 5.000 lph carbonator, AVE 24/24/6 rinser/filler/capper (28 mm ROPP), Kosme Unicol 720-9-2 dual-aggregate wet-glue labeler (new 2013!), Domino laser coder, Freemantle tray erector, Ave Alta Meccaniche type Inca 1T pick&place tray loader, (single-head machine, with heads for 12x 1000 ml, 12x 750 ml and 24x 330 ml), Dimac Starfilm LS film-only shrinkwrapper (overwrapping of trays), Ave Alta Meccaniche PABR 50/1 Palletizer. Some interconnecting conveyors.

Brand-New, Still Packed, Pellet Mill, capacity 5 tons equipped with 6 heads

Key data: 4 mm, 80 , 20

Heavy Duty Four-Sided Planer Still in operation until the end of July 2024! Detailed technical description in the PDF document (attached in the photo gallery).

Base Machine is a OMSO DM44N 2-Lane Lid Machine, age 2004, L- Format in feed conveyor for feeding Vertical Lid Stacks, acts as an accumulator as well Auto feeding of Lid Stacks to the 2 x Universal Screw Denesters with suction Nipples Infeed conveyor with Vacuum to keep Lids in proper position Each Lane with PAGOmat 6HS Pressure Sensitive Label dispensers, with PLC Controls, manufactured by PAGOmat/ Fuji Seal, Switzerland Outfeed Conveyor to 2-Lane Lid Stacker 2-Lane Stacker, each Lane with 2 x Universal Helical Screws Main Drive with a variable frequency, AC-Synchronous Motor with a brake, with Microprocessor Controls Max. dia. of round Lids: Ø125 mm Max. dimensions of Rectangular & Oval Lids: 125 x 150 mm Max. height of Lids: 25 mm Speed with Oval Lids dimensions 120 x 130 mm: Single Lane 110 Lids/ min, Dual Lane 220 Lids/ min 400 V, 3 phase, 50 Hz

4 SIDE PLANER machine model GUILLET KXR with n.4 spindles second hand machine in Excellent working condition - Composition : 1° shaft : surface planer . motor power Hp 7,5 2° and 3° shaft : spindle moulder . motor power Hp 7,5 4° shaft : thickness planer . motor power Hp 7,5 inlet length mm. 2000 feed speed: from 4,5 to 27 mt./min . motor power Hp 2 automatic lifting. motor power Hp 0.35 vertical and horizontal movement of 2nd and 3rd shaft vertical and horizontal movement of 4th shaft max. useful working width mm. 220 max. useful working height mm. 120 weight kgs. 1600 volt. 380/50

Key data: 5 , 230 mm, 130 mm

I sell the Weinig Unimat 300 four-sided planer, built in 2004 Feed speed 5-30 m/min. Working width 230mm Working height 130mm 5 Spindle Configuration: bottom - right - left - up - down Combined power 28kW 3-zone pneumatic pressure Good condition. Fully operational! Available soon. Includes full documentation and CE certification.

USED TETRA PAK TBA 19 200ML SLIM 30V FILLING LINE FOR SALE Item #: Usm-198 Category Tetra Pak TBA 19 1-TBA 19 200ml Slim Filling Machine, Year of Manufacturing 2007, Working Hours 9500 2-Straw applicator, TSA 21, Year of manufacturing 2007, U Type Straw, Version 200v 3-Cardboard Packer, TCBP 70, Version 110, Package pattern: 3x9. Feeding side: Right. Infeed form: Z 4-Conveyors and Paper trolly CONDITION: EXCELLENT

Donut funnel Scoop Scoop Reimelt SKF 5/3300 Fettback -Reimelt Scoop for Reimelt fat baking systems -Type: SKF5/3300 -Three-phase 400V 3N 50Hz -Control voltage: 230 volts -Power consumption: 1kW -Rated current: about 3A -Fuse: 6A -Degree of protection: IP54

Planetary mixer Rego PM100 E - Planetary mixer Rego - Type: PM100 E - Power: 11 kW - Volts: 220 / 380 - Amp: 25

Weibert SD 510 Dressing thickness planer including 4-tersa knife shaft Planer width 510mm Dressing table length 2250mm Planer fence 1500 mm 90°-45° Machine Grey Cast Iron Tables 5.5 KW (7.5 HP) 400V Thicknessing table 1050 x 510mm Passage of 250mm Numerical display thickness table Electric height adjustment of the thickness table 2 infeed speeds 6 & 12 m/min Dual folding system of the tables to the rear Weight of 900 kg G&RO-SD510NE-TER

Weibert FS 32 Dressing thickness planer Planing width 320 mm 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables WJ-300100

Polymer plant incl. motors, tanks and agitators, etc.

SPECIFICATIONS Pilot plane on the entrance side: 2000 mm Grooved table Machinable width: max. 180 mm Machinable height: max. 150 mm Spindle diameter: 40 mm Shaft drive Drive shaft power: 4.0 Kw Soundproof booth Spindle Configuration: I Shaft: Bottom 4.0 kW II Shaft: Right 4.0 kW III Shaft: Left 5.5 kW IV Shaft: Right 5.5 kW V Shaft: Top 11.0 kW VI Shaft: Bottom 4.0 kW VII Shaft: Top 11.0 kW VIII Shaft: Universal 4.0 kW

Key data: 140 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA INTAREMA® 1714 TVEplus®, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 1200kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!

Ich habe eine gebrauchte - halbautomatische Donutform zu verkaufen. Preis 1950 Euro leicht verhandelbar.

Key data: 530 mm, 3000 mm, 4 St.

SPECIFICATIONS: Working dimensions mm: 3000 x 530 Speed 5000 rpm Number of knives: 04 Installed capacity: KW 5.5

Dry air dryer Granulate dryer for drying and heating hygroscopic granules. Capacity 600 l. Heating capacity 4.5 kW. Optionally available with dehumidifier AZO LE 600 P.

Key data: 140 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA 1514T, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are replaced with original EREMA spare parts. The machine is designed for a throughput of up to 1100kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!

SCM fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

ID3280 Gravel washing plant / Kies-Waschanlage year/Year of construction 1987 Skid mobile, washing plant AT GmbH, type Roberg, washing screen unit size 1100 x 3000 mm, with sand screw and sludge decanter, fractions 16/32 4/8 0/4, capacity approx. 40-60 tons/h, Plant has been running until the end. Skid mobile washing plant AT GmbH, type Roberg, washing screen unit size 1100 x 3000 mm, with sand auger and sludge decanter, fractions 16/32 4/8 0/4, capacity approx. 40-60 to/h, system has been running until the end.

Granule dryer for heating and drying hygroscopic plastic granules. Tank capacity 1200 l. Heating capacity 9 kW. Optionally available with air dryer AZO LE 400 K

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M2,5 EW20° 2GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M2,5 EW20° 3GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Filter separator for wood chips, wood dust, etc. on a chip hopper, chip silo. 104 filter bags with a total filter area of 222 m2. Explosion protection with Brilux explosion dampers Height 4400 mm, width 3050 mm, depth 2600 mm. Vibration cleaning of the filter bags.

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M2.25 EW20° 3GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M1.5 EW20° 3GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M2,5 EW20° 5GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M1.5 EW20° 4GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M2 EW20° 3GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M2 EW15° 3GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inclined elevator SA 400 with RM 75 USED 10038241 / 147300000G M0009906E/07/00007 Subject to prior sale!

Sanding plant, coating plant used Manufacturer: unknown Type: Sanding width approx. 1500 mm 380 V Total dimensions approx. : 3250 x 2250 x 3000 mm The plant was used for sanding Eternit panels. Changes and errors in the technical data, specifications and prices as well as prior sale

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M3 EW20° 4GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ultraclean PET Bottling Line – Alfill / KHS Hotfill (2003) Versatile. Hygienic. Ideal for Juice, Tea & Functional Beverages. This Ultraclean PET Bottling Line, manufactured in 2003 by Alfill Engineering and KHS, is designed for hotfill applications and delivers up to 6,000 bottles per hour. Suitable for multiple formats from 200 ml to 1000 ml, it ensures hygienic, reliable filling of sensitive beverages like juice, iced tea, and isotonic drinks. Key Specifications Manufacturer: Alfill / KHS Year of Manufacture: 2003 Output Capacity: 6,000 bottles/hour Bottle Formats: 200 / 250 / 500 / 750 / 1000 ml Filling Type: Hotfill / Ultraclean Included Equipment Alfill Linefill CP48-16-8 Rotary filler with hygienic hotfill technology Sleever – Clever (2003) For full-body shrink sleeves, ideal for modern beverage branding Shrink Tunnel Ensures perfect sleeve application  ...

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M3,5 EW17,5° 3GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M3 EW20° 3GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Plasmac ECO60HC recycling machine from 2014. Output approx. 100 - 120 kg/hour. A barrel and the screw is refurbished A motorized roll feeding unit is included Complete with water chiller unit.