plan used for sale

pdf description attached

BÜHLER MPAD 814 Plansifter Power 3 kw Pendulum shaft drive, flat belt approx. 80 replacement screens (9 x new) good, ready-to-use condition

Good Plansifter BÜHLER MPAH 628 Screening box 2.15 h., 24 sieve, 6 pass. ( 2x B1, 2x B2, 2x B3 ) without sieve stacks, 36x floor nozzle ø150 new, Cleaned, drive reviewed

For different sizes,

silo, bulk material silo, gravel silo, sand silo, storage silo, aggregate silo used Manufacturer: unknown Volume approx. 1500 - 1600 m3 27 individual chambers each approx. 2.2 x 2.2 m (one of them staircase) Silo Material: Steel Square Total dimensions: approx. 20 x 9 x 15 m We have various silos in different sizes made of a large mortar and plaster mixing plant. Of course, also various other components, such as filters, elevators, weighing containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.

Washing screw stainless steel, sieve basket wash screw used, Manufacturer: unknown Diameter approx. 550 mm, Drive 1.1 kW Total dimensions approx. 6.5 x 1.3 x 1.7 m. The plant comes from a plant where canned food was produced. Changes and errors in the technical data and information excepted.

Plansichter Buhler model Mpad 6.14, 6 working channels with 14 frames each, drive shaft with motor

I sell the four-side planer Futura P-MAX 23/5+UNIV, built in 2008. 6 Spindle: bottom - right - left - top - bottom - universal Electronic programming for working width, working height and feed speed. Element max. 230x170mm ! All 6 spindles 6000 rpm. Material prints for short elements. Weight 2500kg. 1-zone pneumatic material pressure system for feed Fully operational. Available the same. Exhibition machine, has worked very little !

Automatic gas-atmosphere exchange system and ultra-high-vacuum-high-temperature furnace for thin tubes for molecular cleaning at 12 stations for thin tubes from 2mm diameter to 120cm in length and conditioning or replacing the gas atmosphere inside the tubes in one pass

Plastic planks / tilting planks 60x40cm approx. 1000 pieces in stock

Tilting planks with trolley Stainless steel 17 tilting planks Dimensions: 80,5x60cm W/D The car has 18 editions Dimensions of the car: Height:177cm Width: 87cm Depth: 61cm

Kemper bucket elevator for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft doughs Space-saving design optionally 1 or 2 pieces of dough Run-off belt Dimensions: Height: 216cm Width: 71cm Depth: 120cm

Fat baking machine Jufeba Stainless steel analog control up to 110°C with outlet valve incl. accessories

Fat baking station mobile sales counter on rolls with grease baking device Drawers + cash register separate sink in the drawer with power connection Height: 175cm Width: 190cm Depth: 80cm

Kemper Long Knitter Type: Princes Year of construction 2007 Stainless steel version for long work of the breads with 2 attachments Band width: 32cm comfortable with bread systems on rolls Height: 155cm Width: 200cm Depth: 60cm

Filler block, Fabr. Nagema, Type: Varifill 40/10K/10PP Capacity: 12,000 Fl/h, run on 0.33 lt longneck and 0.5 lt NRW bottles 40 filling valves 10-digit crown cork 10-digit screw capper (for MCA 28 closures), double pre-evacuation, Running direction: left -> right YOC 1994 L: 4,000 mm, W: 2,700 mm, H: 2,800 mm Price on request

Fat baking planks with attachmentTilting planks 2 trolleys 39 piecesTilting planks dimensions : W: 99cm D: 81cm H: 6cmFat baking appliance attachmentExternal dimensions : W: 182cm D: 84cm H: 16cmFor details see picture

2 cyclones as good as new Type AKA VORTEX Twin TRT 4118 Throughput per twin 95m3/h total 190m3/h Diameter 200mm, cutting cut approx. 50my 1 pcs new cyclone Type AKA Vortex KRS3128 II 40m3/h DM 150 mm All cyclones including overflow line and shut-off valve If required, a refurbished PUMP METSO VASA is also available Drive 30 kW available are also handed in individually

Butter press machine  made of stainless steel with discharge funnel on rolls Height: 200cm Width: 150cm Depth: 88cm

Bread long-knitter for bakery Manufacturer Unknown Height: 180cm Width: 210cm Depth: 130cm

Qty. 1 Second-hand bar and wire rod production plant Mfc.: Sarralle, Danieli, ABB, Indar Built: 1990’s, 2000, 2005, 2007, 2010 Revamped: 2008 Capacity: 1,100,000 T/annum Entry material: Scrape Semi product: Billets Size: 130x130 mm or 140x140 mm Length: 8 – 13 m Reinforced Bars: Dia.: 8 - 40 mm Length: 6 – 12 m Rebars: Dia.: 8 - 16 mm ID: 850 mm OD: 1100 – 1250 mm Height: 800 mm Wire Rod: Dia.: 5.5 – 14 mm Scope of supply: Scrap Transportation Machines EAF Ladles Furnace Continuous Caster Billet Reheating Furnace 23 Rolling Mills (Dia. 8-10 mm) 21 Rolling Mills (Dia. 12-32 mm) Wire Rod Mill Flying Shears (2) Spooler Line Cooling beds (2) Cranes Transformes Spare Parts

Used dressing Int. Kind. Ref. m3217 Manufacturer Hofmann Type unknown Planing width 510 mm 4-knife shaft Weight approx. 800 kg Item location: 58730 Fröndenberg/Ruhr The machine can be visited. We will be happy to send you further photos by e-mail. A forklift/crane for loading is available. Prior sale is reserved. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data.B, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with transfer of risk to the buyer, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, deale ...

Kemper bucket elevator for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft doughs Space-saving design optionally 1 or 2 pieces of dough Transverse belt left-hand / Cross-band right-hand with scales

Extraction unit for filler station or preparation station: Make : Wolf Year of construction : 2009 Dimensions : 1.5 m x 1.5 m x 1.5 m (approx. WxLxH) Volume flow : 19,000 or 9,500 m3/h, 1895 or 948 1/min; 7.5 or 2.0 kW Pipelines : optional exhaust air pipes and deflector hood. Electrics : Control cabinet Location : Warehouse Area Nuremberg Retail price : € 3.350,- net ex location

Grease baking device Habersang Stainless steel analog control up to 110°C with outlet valve incl. accessories Net price plus VAT ex warehouse

Gebr. Fettbackgerät Habersang, overhauled, 36 Berliners, with cooking space and 9 planks

Year of construction 2016, very good condition, 5 lanes with screw dosing for filling sugar sticks in use. Sugar stick 17mm width, usual gastro format.

Tetra Pak TPA 19 200ml Prisma Filling Line For Sale Item #: Usm-148 Category Tetra Pak TBA 19 One Used TPA 19 200ml Prisma Filling Line For Sale TPA 19 200ml Prisma Filling Machine, Working hours only 5300 Straw Applicator TSA 21, Year of manufacturing 2004 Packer TCBP 70, Year of manufacturing 1999 Conveyors & Paper Trolly Condition: Complete line & in excellent condition.

Control plansifter Rüter 4-part, 1000 mm high, Complete overhaul. Wire mesh 500 my, resopal sieve With product distributor Double bearings completely renewed, product distributor bearings and seals renewed, sieve stacks cleaned Edition with short floor nozzles without control opening

5 l can filler and 2 l bottle filler

Working width: 410 mm; Planer shaft: strip knife; Number of knives: 3; Dressing table length: 1800 mm; Dressing stop angle adjustable: yes 45Â to 90Â; Motor power: 4.4 kW; Engine braking: yes, automatic; Suction port: 100mm; Machine length: 2000 mm; Machine width: 750 mm; Weight: 295kg;

with 14 shapes with 14 Forms

The electricity and gas-powered plant enables surface treatment of plastic films by flames. Field of application: Z.B. reverse films in the solar industry
 COMPONENTS • PSA Reversible Unwinding and Reversible Winder 2200/12 PSA W/ARW 2200/12 – Fyling Splice • Hill/ Jungwirth burner unit for gas/air mixture • Suction • Erhardt+ Leimer web edge control • OCS camera system for error detection • Semket labelling system for marking defects • GWK temperature control units for roller cooling SKL SP HC300 330KW

Technical data Execution: milling Flat cams: max. diameter: 260 mm Bell cams: max. diameter: 250 mm max. height: 200 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 1600 mm Width: 900 mm Height: 1700 mm Various accessories: Coolant system Lamp Milling head

I sell the four-sided planer FUTURA PRG24/7, Year of construction 2005. Element size max. 260x150mm ! 7 Spindle Configuration: Bottom 7,5kW (10HP) / 6000 rpm Right 7,5kW (10HP) / 6000 rpm Left 7,5kW (10HP) / 6000 rpm Top 7.5kW (10HP) / 6000 rpm Top 6.75kW (9HP) / 6000 rpm Right 6,75kW (9HP) / 6000 rpm Universal 7,5kW (10HP) / 6000 rpm Combined power 62KW / 102 A Weight 4500kg. Element size max. 260x150mm ! 2 FABA planing heads with spiral knife fi.140x260x40mm included in the price. Electronic programming for working width, working height and the height of pressure zone Feed speed adjustable with inverter. 2-zone pneumatic material pressure system for feed Available the same.

Part Number 6322 TECHNICAL DATA - max width of the workpiece 260mm - max height of the workpiece 160mm 6 spindles: 1) horizontal bottom 260mm 7,5kW 2) vertical right 160mm 7,5kW 3) vertical left 160mm 7.5kW - 3 spindles electrically adjustable front/rear 0.4kW 4) horizontal top 260mm 11kW - 4 spindles electrically adjustable up/down 0.4kW 5) horizontal bottom 260mm 7,5kW 6) universal 230mm 7,5kW - universal spindle electrically adjustable up/down - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 1,2,3,4,5 50mm - universal spindle diameter 40mm - from above 6 pulling, toothed, metal, torsional introductory shafts, including 2 double - from above 5 pulling leads shafts, rubber, smooth including 3 double - from the bottom from the side of the pressure on the inlet - from below 2 pulling, metal, toothe ...

Part Number 6338 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 160mm 5,5kW 3) vertical left 160mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 7,5kW 6) horizontal bottom 230mm 7,5kW 7) universal 360° 230mm 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000rpm in advance: - 6 pulling, toothed, metal introductory shafts, including 2 double - 4 pulling shafts, rubber including 1 double - 3 clamps on the lead bottom: - pressure from the side on the inlet - introductory shaft, toothed, pulling, swivel in the lower table top - 3 pull rollers, metal, smooth - pneumatically adjustable shafts - length of the introductory table top 1190mm - central lubricati ...

Part Number 6368 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 130mm 5,5kW 3) vertical left 130mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 11kW 6) horizontal bottom 230mm 18,5kW 7) universal 230mm adjustable at 360 degrees 5.5kW - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 electrically adjustable up/down - from above 8 metal pulling introductory shafts, swivel including 2 double - from above 4 pulling rollers, rubber - pressure from above 2pcs - from the bottom of the ratchet - from the bottom from the side 3 clamps - from below 2 metal rollers, smooth, pulling - from the bottom 2 double rollers, pulling, rubber - pneumatically pressed shafts ...

Part Number 6393 TECHNICAL DATA - max width of the workpiece 200mm - max height of the workpiece 150mm - number of spindles 4: 1) horizontal bottom 200mm 5,5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal upper 200mm 5,5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000rpm in advance: - pulling introductory shafts, toothed 6 pcs including 2 double - 1 pulling shaft, rubber bottom: - introductory shaft toothed, pulling, torsional in the lower table top - side pressure 3pcs - lead roller, pulling, metal, smooth - all pneumatically pressed rollers - length of the introductory table top 2130mm - table top adjustable up / down - central lubrication - electrical setting of planing thickness - lifting motor 1,1kW - smooth regulation of the feed speed on the inverter - feed motor 3kW - feed  ...

Colours 32 possible mixed colours, 2 container waste Mixing speed max. 3 min. for mixed colours, approx. 45sec for pure colours (for up to 40kg drum), filling quantity 20kg and 40kg Software available Automatic valve cleaning (also customisable – rinse automatically according to special colours) It is also possible to switch the IBC drum via pumps (no manual intervention) Double filter on the ink inlet drums (ink flow – 1x drum + 1x valve filter) 2x solvent connection (currently ethanol, acetate) Agitator and lift for buckets available completely automatic - everything is pneumatic in the hall itself all in EX design (stainless steel)

TECHNICAL SPECIFICATIONS (Cone Mixer) Manufacturer: KNIELE Name: Cone Mixer Type: KKM 2000 / 3000 Version: with bevel gear Year of construction: 2008 Output quantity: 2.0 cbm Capacity: 3,000 l Three-phase motor agitator inside: 45 kW Three-phase motor agitator outside: 37 kW Mixer lining: Ceramic Mixing system for ready-mixed concrete consisting of: - KNIELE Cone Mixer KKM 2000 / 3000 - Elevator system with bucket - Feeder scale - Cement scale - Water dosing system - 1 x 100 t cement silo (double chamber) - 1 x 80 t cement silo (double chamber) - 1 x 60 t cement silo (double chamber) SPECIFIC COMMENT - Aggregate storage for the most part no longer usable - Machines will be dismantled in the near future and ready for loading If you are interested, we can send you a more detailed offer with photo documentation. EuroConsult Dimitrios Piretzidis