127,591 used machines on RESALE, but how to find them? Machine Search
Planetary stirrer Model: V-Mixer 60 L Professional machine with robust technology! for best results! LED display 10 power levels and timer Intervention protection / safety grille with protective switch thanks to the easy-Trop, continuous work can be done suitable for use in bakery and confectionery Stirring machine with tool: 1 whisk, 1 mixed band, 1 flat stirrer 1 60 litres stainless steel boiler Boiler stroke electric DGUV V3 tested Connection 400V, 4 kW, 16A-CEE plug Dimensions: 742 x 1060 x 1695 mm, WxDxH Continue TOP bakery machines in stock!
Planetary stirrer Model: V-Mixer 80 L Professional machine with robust technology! for best results! LED display 10 power levels and timer Intervention protection / safety grille with protective circuit Stirring machine with tool: 1 whisk, 1 kneading hook, 1 flat stirrer 1 80 litres stainless steel boiler Boiler stroke electric DGUV V3 tested Connection 400V, 4 kW, 16A-CEE plug Dimensions: 853 x 1102 x 1804 mm, WxDxH More TOP bakery machines in stock!
Planetary stirrer Model: V-Mixer 100 L Professional machine with robust technology! for best results! LED display 10 power levels and timer Intervention protection / safety grille with protective circuit Stirring machine with tool: 1 whisk, 1 kneading hook, 1 flat stirrer 1 100 litres stainless steel boiler Boiler stroke electric DGUV V3 tested Connection 400V, 4 kW, 16A-CEE plug Dimensions: 853 x 1102 x 1804 mm, WxDxH More TOP bakery machines in stock!
Planetary stirrer Model: V-Mixer 120 L Professional machine with robust technology! for best results! LED display 10 power levels and timer Intervention protection / safety grille with protective circuit Stirring machine with tool: 1 whisk, 1 kneading hook, 1 flat stirrer 1 120 litres stainless steel boiler Boiler stroke electric DGUV V3 tested Connection 400V, 6 kW, 16A-CEE plug Dimensions: 853 x 1102 x 1958 mm, WxDxH More TOP bakery machines in stock!
VELO flotation system PRI 100 for clarifying grape musts Capacity: 20.000l/h UNI-DEPP-KAR Manufacturer: VELO S.p.A. Type: PRI 100 Year of construction: 1998 Fabr.No. V6226 Capacity: 20.000l/h mobile with compressed air generator Measurements: Height: 2180 mm Length: 1500 mm Width: 1220 mm All the equipment s. photos
1. Screen changer "Kreyenborg" K-SWE 180 2. Water ring granulation "AGRIFON" 3. Classification sieve for the separation of Granules over-good and lower grain sizes Throughput: Depending on material mix , 500 kg/h
1 used Framax Tribloc bottle filler, built in 2012, consisting of Borelli 9-digit rinser and 8-digit low vacuum / gravity filler type CIAO-xp with 1-digit Arol Eagle C 26 mm crown corker. Plant last used for filling beer (bottle fermentation) in 61 mm diameter 330 ml as well as 71 mm diameter 500 ml glass bottles at an output of 1,920 bottles/hour. Filler also suitable for bottling wine.
1 of used Framax tribloc bottling machine, new 2012, consisting of a Borelli 9-head rinser / 8-head low-vacuum/gravity filler CIAO-xp with single-head Arol Eagle C 26 mm crowner, Last running bottle-conditioned beer at 1.920 bph with handling parts for 61 mm diameter 330 ml and 71 mm diameter 500 ml glass beer bottles. Filler also ideally suitable for bottling wine.
Faceplate, faceplate chuck, four-jaw chuck -without: screw-on jaws Manufacturer: Forkardt -Mouth size: Ø 610 mm -Cone holder short cone: 8 (139 mm) -Weight: 121 kg
Lacquer roller machine, roller application machine, powder coating plant -Powder coating system: used for slats/blinds production -Pneumatic components: Manufacturer Festo -Geared motor: WEG 0.25 kW -Dimensions: 3400/850/H1935 mm -Weight: 746 kg
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 500 mm -Fastening type: Thread: M110 x 6 mm -Weight: 72 kg
TECHNICAL DATA: Autoclave dimensions mm: 350 x 2000 Autoclave volume lt: 175 Installed electrical power KW: 55
Double pipe heat exchanger pipe heat transfer for biogas plant, sewage treatment plant sludge hygienization - used - Manufacturer AEL GmbH Leisnig Type Double pipe heat transfer W202 Fabr. No. 7.0637.940/29-56 Built in 1997 Permissible betieb pressure 6 bar Permissible operating temperature 90°C Content 1090 l Kerb weight 6510 kg Length approx. 11 m Width approx. 3 m Depth approx. 1.5 m
Big Bag filling station, filling and weighing system used The system consists of the following components: 1 filling hopper approx. 2300 height 2500 mm 2 stainless steel trough screws 1 tumbling/shaking sieve approx. 1200 height 1900 mm 1 BigBag filling station approx. 1950 x 2400 x 3700 mm 1 control cabinet The Big Pack filling is filled by wheel loader or forklift via a pouring funnel. The filling material is transported via a conveyor screw to a tumbling sieve. From there, transported with another screw to the actual weighing and filling station. The big bags lie on a vibrating floor when filling and are thus compacted.
New machine Stainless steel model 24-month warranty Properties: + TOP value for money + Solid cone round wire in stainless steel version + with control panel and automatic flour spreader + Model "S", suitable for small dough pieces (approx. 100 - 350 gr) + optimally suited for wheat dough up to a TA of approx. 170 (depending on the dough) + extra long rounding/running distance of 6 meters for best round ingestion properties + gutters and cones are teflon-coated + Base is mobile and also available in stainless steel + mounted on robust rollers with fixed SPECIAL equipment (not retrofittable!): - Blower / ventilation of the gutters and cone (recommended for dough with TA > 155): + EUR 1,745,-- Technical data: Weight range: 100 - 350 grams (dough/product dependent) Hourly output: approx. 1,800 pieces (dough/product dependent) Orbit: 6 meters Dimensions: 105 x 105 ...
New machine Stainless steel model 24-month warranty Properties: + TOP value for money + Solid cone round wire in stainless steel version + with control panel and automatic flour spreader + suitable for medium-sized dough pieces (approx. 300 - 1,100 gr) + optimally suited for wheat dough up to a TA of approx. 170 (depending on the dough) + extra long rounding/running distance of 6 meters for best round ingestion properties + gutters and cones are teflon-coated + Base is mobile and also available in stainless steel + mounted on robust rollers with fixed SPECIAL equipment (not retrofittable!): - Blower / ventilation of the gutters and cone (recommended for dough with TA > 155): + EUR 1,745,-- Technical data: Weight range: 300 - 1100 grams (dough/product dependent) Hourly output: approx. 1,800 pieces (dough/product dependent) Orbit: 6 meters Dimensions: 105 x 105 x ...
Fat baking device Esback Köhler 661 101 -Fat baking device with fermentation cabinet -with 1 tipping plank trolley and 10 tipping boards -optional with 2 tipping plank trolleys and 20 tipping boards -380 Volt 50Hz -Fat tubs inner mass: 72x63cm
- brand new - 20,000 litres steel tank - storage tank - diesel tank according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight approx. 4.2 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue. (On request, other RAL col ...
Manufacturer: NERAK Type: WB 370 Built in 2003 CC-foot 2160 mm CC-Vertical 9600 mm CC head 3110 mm Plastic cup approx. 36 cm wide 20 cm deep approx. 10 cups per m Rubber block chain Speed: 0.3 m/s Power 5-10 m3/h (bulk density 0.5-1.0 t/m3) User manual and technical drawings available
Hull engine in replacement Scania DC13-071A without turbo,EGR cooler+hoses,PDE's,controlr installed in Kleemann crushing plants. Price only on request
Plasma hose assembly, welding torch, MIG/MAG torch, hand-held arc torch, gouge, gouge nozzle -Harris: FAB3 jointing nozzle -Pressure: 6.0 - 7.0 bar - Price: per piece - Quantity: 14 pieces -Dimensions: 110/25/H25 mm -Weight: 0.1 kg/piece
Plasma hose assembly, welding torch, MIG/MAG torch, hand-held arc torch, gouge, gouge nozzle -Harris: FAG3 jointing nozzle -Pressure: 6.0 - 7.0 bar -Price: per piece Quantity: 6 pieces -Dimensions: 100/19/H19 mm -Weight: 0.1 kg/piece
Extruding system with cross-spray head for sheathing of small profiles/filaments consisting of: 30 mm extruder with tool, water bath, extractor and winder Optional with memory for role change
Compounder with segmented screw elements, cylinder with a degassing opening with hot tee, stainless steel housing, swivel
Faceplate, faceplate chuck, four-jaw chuck -Hole size: Ø 408 mm -Mounting thread: M95 x 6 mm -Weight: 52 kg
According to description pdf attached complete line for profiles + WPC profiles
-Fat baking device from Esback -with fermentation cabinet -with tipping plank trolley incl. 10 tipping boards -with 2 screen carriers incl. manual turn -380 volts
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 400 mm -Cone size: 6 -Short cone mount for: bayonet disc -Short taper mount: Ø 106.375 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 90 mm -Weight: 51 kg
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 355 mm -Internal thread diameter: 69 mm -Weight: 24 kg
Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Mouth size: Ø 500 mm -Short taper mount for: bayonet disc attachment, taper size 8 -Bolt circle: Ø 171.4 mm -Weight: 96 kg
Planetary stirrer Varimixer Bear R-N 30 Used Varimixer Bear Planetary Stirrer Model N-N 30. It is functional and ready for immediate use. The accessories are included. - 30 litres boiler - incl. whisk, flat stirrer and kneading hook - Protective grille - with a boiler - analog control -Woschow & Co Denmark -Bearmixer
Planing machine Weinig hydromat H30 W baujar 1990 36m/min Working width 300mm working-high 200mm memeeser of the fresspindel 50mm with suction
Faceplate, faceplate chuck -Mouth size: Ø 500 mm -Camlock: Short taper flange, taper size 11, bolt circle Ø 235 mm -Weight: 67 kg
Complete PET Soft Drinks Filling Line for sale by Indassol 1.5 Litre & 2 Litre Concentrated Soft Drinks (non-carbonated) 16,000 - 18,000 bph, Blowing - Filling - Packaging Krones, Krupp, Procomac, Zalkin, Alfa Rollquatro, Hueft, Kisters, Newtec Palletiser (1 Litre Filling Line also available) PLEASE NOTE Both Lines were used by Princes Soft Drinks for the production of Non-carbonated Concentrated Soft Drinks. The Krones Fillers on both Lines are Counter Pressure Fillers and the Lines could be adapted to produce Carbonated Soft Drinks by the addition of a Carbonation Unit to the process plant. ADDITIONAL ITEMS AVAILABLE 2 off Bellis & Morcom High Pressure 40 Bar Compressors. Machines are from 1987 but have been subject to a full Service Agreement with Gardner Denver. Lachenmeier H-Multi Flex Pallet Wrapper/Hooder (shared with Line D6) Serial No. 39031 (2 ...
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 440 mm -Weight: 74 kg
Faceplate, faceplate chuck -Mouth size: Ø 500 mm -Camlock: Short taper flange, taper size 8, bolt circle diameter Ø 171.4 mm -Weight: 54 kg
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 400 mm -Conical mount with groove: Ø 105 mm -Passage: Ø 80 mm -Weight: 35 kg
SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 400 mm -Short taper mount: Ø 106 mm -Bolt circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 30 kg
maximum number of results exceeded
please refine your search
10 € 
