134,065 used machines on RESALE, but how to find them? Machine Search
Working width: 630 mm; Planing shaft: strip knife; Number of knives: 4; dressing table length: 2200 mm; Dressing stop angle adjustable: yes; folding up the dressing tables: manual; maximum clearance thickness planer: 220 mm; Height adjustment thickness table: electric; Indication of planing thickness: Scala; Feed speed: 7/14m/min; Feed roller: steel; Pull-out roller: rubber; Pressure bar: articulated; Table rollers: yes; Motor power: 7.5 kW; Engine brake: yes, automatic; Suction port: 160mm; Machine length: 2200 mm; Machine width: 1150 mm; Weight: 1250;
Working width: 530 mm; Planing shaft: Tersa; Number of knives: 4; dressing table length: 2300 mm; Dressing stop angle adjustable: yes; folding up the dressing tables: electric; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Indication of planing thickness: digital; Feed speed: 5 / 7 / 9 / 12 m/min; Feed roller: steel; Pull-out roller: rubber; Pressure bar: continuous; Table rollers: no; Motor power: 7.5 kW; Engine brake: yes, automatic; Suction port: 140mm; Machine length: 2300 mm; Machine width: 990 mm; Weight: 850;
Working width: 410 mm; Planing shaft: Tersa; Number of knives: 4; dressing table length: 2000 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Display of planing strength: mechanical digital display; Feed speed: 6 m/min; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 4.5 kW; Engine brake: yes, automatic; Suction port: 120mm; Machine length: 2000 mm; Machine width: 882 mm; Weight: 615kg;
Towards the middle of the year, two machines are available: Arburg 470H 1000 400 BJ 2010 Arburg 720S 3200 3200; Year of manufacture 2015 The operating hours can be found in the pictures attached, the condition of the 720 S is very good, it has only about 28,000 Bh The 470H is functional so far, but has a cable break/connection problem between the control cabinet and the AMK drive of the plate movement. Here comes sporadically an error message, which is only fixed by turning the drive motor. If you need more information, please get in touch.
Key data: 410 mm
SURFACE PLANER model SCM MINIMAX F1 second hand machine in Excellent working conditions CE regulation: YES instruction booklet and CE certification: YES security protection working width mm. 410 tables length mm. 2610 n.4 knives "Tersa" tilting guide up to 45° motor power Hp 5,5 volt. 380/50
4 coulters of reversible plough; body distance 900 mm; ground clearance 800 mm; Stiffener body CV14; Hydraulic side adjustment; Hydraulic frame adjustment during turning; fertilizer depositor; Depth Control Wheel Rubber; Auction-ID: A1-46030-5
Grafoteam PST 480 N Pressure Plate Stacker; cleaned and tested; height-adjustable; Format 811x1200mm; incl. Printing plate trolley. Plate stacker Grafoteam PST 480 N; cleaned and checked; adjustable in hight; size 811x1200mm; included plate trolley.
Control station with digital readout; noise booth; without the TimBird Auction-ID: A1-43429-82
Powerlock span; control station with touchscreen Powercom control; with sound booth Auction-ID: A1-43429-71
Equipped with: Siemens TD200 control and automatic feed-through; Sound booth. , without the TimBird Auction-ID: A1-43429-2
Equipped with: automatic feed and positioning unit, Type: 2.80.2, Year of construction: 2009, Machine number: 0486, Length: 5000 x Working width: 250, Length feed- roller conveyor, (1x) Length: 6700 x working width 2000mm, (1x) Length 7000 x working width 2000mm, Maximum load: 6000kg. Auction-ID: A1-43429-1
Equipped with Powerlock span; Control station with touchscreen Powercom control; sound booth ; without the TimBird Auction-ID: A1-43429-74
W.o. Kantelaar; chain conveyor; transport with conveyor belt; Chain conveyor with infeed system Auction-ID: A1-43429-78
Weinig Hydromat 2000 planing line with in and outfeed system, Manufacture year 2008, Consisting of:, - Weinig automatic infeed system High Mech E1, - Weinig moulder Hydromat 2000, - 6 spindles: B-R-L-T-T-B, - feed speed max. 60 m/min, - straight and profile jointers, - Weinig automatic outfeed system High Mech A1
Dosing and mixing system model VS-3K, further information on request.
A Jakü deaeration and CO2 impregnation system is available. Nominal capacity: 10000l/h, water inlet pressure range: 3bar-4.5bar, CO2 inlet pressure range: 8bar-10bar, nozzles: 3, nozzle fineness: medium/fine/very fine. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, empty weight: approx. 800kg, operating weight: approx. 1400kg. Documentation available. An on-site inspection is possible.
Fuji Imaging Plate System / CR System FCR Capsula X with: Reader Type CR-IR 357 Primary processing station 10 cassettes IP Cassette Type CC: 24x30 - 6 pcs./ 35x43 - 4 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are used and sold as is, unless otherwise stated. We do not give any guarantees or warranties for the devices sold. It is the buyer's responsibility to ensure that all equipment is thoroughly inspected and overhauled by qualified technicians prior to use on the patient.
Fuji Imaging Plate System/ CR System FCR Capsula X with Reader Type CR-IR 357 Primary processing station Cassettes IP Cassette Type CC: 18x24 - 2 pcs./ 24x30 - 2 pcs./ 35x43 - 2 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • To recommission the device, you will most likely need a license from the device manufacturer. • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are used and sold as is, unless otherwise stated. We do not give any guarantees or warranties for the devices sold. It is the buyer's responsibility to ensure that all equipment is thoroughly inspected and overhauled by qualified technicians prior to use on the patient.
Two recooling plants of the same size, each with a recooling capacity of 850 KW
Year: 2009 - technically efficient, ready to work – after full service - pneumatic clamps - cutting at 45° - two cutting discs: 225 mm + two scoring blades - measuring slider
Hand lever plate shears approx. 80 mm, table model
3 pieces Walimex Pro Niova 900 Plus Daylight LED Panel incl. tripod & accessories Auction-ID: A7-46320-53
12000 ANSI Lumens, 1.024x768 XGA, 3LCD; Video signal input: DVI, VGA; electrical connection: 200-240 V - 50/60 Hz; Colour: Anthracite ; Dimensions of transport box: 112x90x76 cm (L/W/H), total weight: 111 kg Auction-ID: A7-46311-27
5000 ANSI Lumens, 1024x768 XGA, 3LCD; Video signal input: DVI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White Auction-ID: A7-46311-23
Clamping plate with prism, centering table, centering device, plate field, welding table, welding table, plate boring machine -Ideal for centering shafts -Width: 658 mm -Table length: 2396 mm -Height: 115 mm -Working height: 920 mm -Prism length: 2900 mm -Prism width: 140 mm -Dimensions: 2920/730/H1200 mm -Weight: 540 kg
SKF - Ecoflon 2 - Batch of technical plastic rings and parts 211KG Auction-ID: A1-46070-190
Telemecanique - Batch of TSX PLC modules (80+ pieces) Auction-ID: A1-46070-255
Elges / INA - Batch of spherical plain bearings and rod ends 52KG Condition: unused + used Auction-ID: A1-46070-132
Texas Instruments - Batch of industrial control cabinets / PLC units Auction-ID: A1-46070-98
TECO - Batch of various Programmable Logic Controllers (PLC) Condition: unused QTY: AP-360BP-D 3x QTY:SG2-20KT-D 46x QTY:SG2-10CR-A 49x QTY:SG2-20CT-D 50x QTY:AP-360BR-A 9x QTY:AP-8EXD 9x QTY:SG2-MBUS 19x QTY:OP10-PL01 8x QTY:SG2-4AI 16x QTY:AP-8AD 6x QTY:SG2-PBUS 15x QTY:AP-8EYP 10x QTY:SG2-12KT-D 50x QTY:AP-114BR-A 18x Auction-ID: A1-46070-107
Honeywell / Texas Instruments - Batch of industrial PLC modules and I/O systems Auction-ID: A1-46070-138
Beckhoff - AM8131-0F20-0000/PLE - Batch Servo Motors 25x Auction-ID: A1-46070-27
Teco - Batch of various Programmable Logic Controllers (PLC) Condition: unused QTY: SG2-DNET 15x QTY: SG2-4PT 15x QTY: TP03-60HR-D 4x QTY: TP03-40HT-A 16x QTY: SG2-10KR-A 47x QTY: SG2-12CT-D 49x Auction-ID: A1-46070-161
Batch of industrial printed circuit boards / plug-in cards (PCB modules), various types Auction-ID: A1-46070-120
Batch of industrial circuit boards & modules (PCB cards + plug-in modules) Auction-ID: A1-46070-59
Without support, only the top including base Auction-ID: A1-46315-73
Batch of galvanized steel brackets, clamps and mounting plates (453KG) Weight: 453KG net Auction-ID: A1-46070-295
Including support, consisting of: dial gauge on tripod Vise, jaw width 70mm System Block 3R Auction-ID: A1-46315-74
SICK - Batch of PLS101-112 safety laser scanners (30 pieces) Auction-ID: A1-46070-145
SKF - Batch of plastic rings 181KG Auction-ID: A1-46070-263
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
KLOPP H 1000 - Planing machine -Planing length max. 1000mm -Planing width max. 750mm -Hydraulic drive with infinitely variable speed -Chisel removal -Automatic transverse feed in two areas (fine & wide finishing) -Quick adjustment (rapid traverse) of the work table Dimensions: LxWxH 3.4x1.5x1.6 meters / Weight 4000 kg
\" Face plate Ø 1000 mm with clamping claws – for vertical lathe / large lathe Face plate / lathe chuck for large lathes, suitable e.g. for carousel lathes or heavy horizontal lathes. The face plate is equipped with adjustable clamping claws and is ideal for clamping irregular workpieces. Equipment: • T-slots over the entire diameter • Robust industrial design • Clamping claws incl. threaded spindles Condition: • Used • Diameter: approx. 1000 mm • Height: approx. 220 mm • Design: Face plate with T-slots • Clamping system: mechanical clamping claws (adjustable)\" Auction-ID: A7-46417-410
\" Measuring stand with granite measuring plate DIN 876/00 with column with clamping block • Granite measuring plate • Weight: approx. 19 kg • Degree of accuracy: DIN 876/00 (very high) Deviation: 0.003 mm • Actual deviation: 0.0018 mm • Made in Germany • Fixed column with height adjustment Dimensions of granite measuring plate: 300 x 300 x 70 mm \" Auction-ID: A7-46417-261
maximum number of results exceeded
please refine your search
1.000 € 
