pl used for sale

Used plasticizing system, diameter 120 mm. Technical parameters: - screw diameter 120 mm - barrel diameter 120 mm L/D 33 mm - 6 heating sections/heaters with a power output of 4300 W - complete set of fans with housings - double degassing section - complete power supply for heaters and fans. The plasticizing system is in good condition, with a capacity of approximately 400 kg/h.

Boring spindle diameter: 130mm, tool holder: SK50, centering: 500mm, travel X/Y/Z: 250mm/160mm/380mm, travel W/U: 1000mm/320mm, feed rate: 2m/min, rapid traverse: 5m/min, max. diameter drilling/facing: 800mm/1400mm, torque boring spindle/facing support: 3100Nm/6150Nm, clamping plate dimensions X/Y/Z: 3500mm/1750mm/350mm, weight: approx. 30000kg, controls: Bosch. Including angle head, extension piece, steep taper tool holder for SK50 (without tools), 4x plate fields with the dimensions 1080mm/2000mm and boring apparatus. Documentation available. An inspection on site is possible.

Agfa Elantrix 125 SX Plate Developing Machine; cleaned and tested; incl. Scrub Kit; suitable for thermal plates; max. Panel width 1250mm, min.200mm; min. Panel length 300mm; Plate thickness 0.15-0.40; Cooling. Plate processor Agfa Elantrix 125 SX; cleaned and checked; included scrub kit; used for thermal plates; max.plate width 1250mm, min.200mm; min. plate lenght 300mm; plate thikness 0.15-0.40mm; Chiller.

Year: 2006 - technically efficient, ready to work – after full service - flash limitation: 0.2-2 mm - maximum welding length: 2600 mm - support arms - PLC controller

Injection moulding machine Engel DUO 4550/800 BJ 2004

Agfa Elantrix ST 125 SX Pressure Plate Stacker; cleaned and tested; Panel width 300-1250mm; Panel length 275-1470mm; Panel speed 400-2500mm/min.; Printing plate trolley. Plate stacker Agfa Elantrix ST 125 SX; cleaned and checked; plate width 300-1250mm; plate lenght 275-1470mm; plate speed 400-2500mm/min.; plate trolley.

Key data: 2600 kN, 950 g/PS, 70 mm

Year of manufacture 2005 Clamping force: 260 tons. Screw diameter: 70 mm Operating hours: 125,000 h incl. removal robot: Engel ERC 55/O-E Good condition, regular maintenance, energized

3-piece consisting of connector FFS-00.250.CTCE31, apparatus box ERN.00.250.CTL, Anti-kink grommet Desmopan white type GMD.00.028.DB, Price for dismantled parts, Parts can also be purchased individually= Plug, Apparatus Socket, Kinking Protection Grommet, Request Single Price

Key data: 90 mm, 30 , 110 U/min

used 90 mm extruder with strand nozzle, water bath and strand granulator

Offer 26041 Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 180 mm - Top height with base approx. 810 mm - Thickness of the top plate approx. 115 mm - 11 T-slots in table surface length 1500 mm - Center distance of the T-slots in the table surface 250 mm each - T - groove width approx. 40 / 22 mm - T - groove depth approx. 16 / 24 mm - Space requirements L 3500 x D 2500 x H 1100 mm - Weight approx. 4500 kg

Key data: 1500 kN, 380 g/PS, 50 mm

Year of manufacture 2005 Clamping force: 150 tons. Screw diameter: 50 mm Operating hours: 117,426 h incl. removal robot: Engel ERC 34/1-E The machine is in good condition, and has been regularly serviced

Key data: 60 mm, 30 , 150 U/min

used Bellaform extruder with 60 mm screw diameter, strand nozzle, water bath and strand granulator

The ROTOTEMP 1,5 is a scraped surface heat exchanger for cooling or heating various products, with a heat exchange surface of 1,5 m2. The heat exchanger consists of a jacketed outside cylinder and a jacketed internal cylinder. The outside jacket is insulated and finished with stainless steel sheeting. The product space is located between the two cylinders. A rotating cage with scrapers is fitted in the product space. The scrapers ensure proper mixing during the tempering process. Because the cylinders are scraped continuously, it is possible to cool crystallizing products without a product layer building on the walls. It is also possible to heat products without the danger of sticking to the walls. Thanks to these characteristics and the design of the installation, it is also possible to accurately perform heat exchange processes for products with high viscosity., Technical specification ...

2x pieces of Unused Endress+Hauser PMP75 Pressure Transmitters., Order code: PMP75-3EX77/0, MWP 0.1/10 bar, p -1 ...10 bar, Mat. 1.4435/316L, Will be sold as a set only., Type of Machine: Pressure Transmitter

Unused Endress+Hauser Smartec CLD18 Conductivity measuring system., Order code: CLD18-1457/0, Firmware version: 02.00.09, Measuring range: 200uS/cm - 1.000 mS/cm, Temperature: -10 ... 110°C, Pressure: 13 bar, Type of Machine: Conductivity measuring system

The Scanima SFM-200 is a simple mixing solution with a compact design at a lower cost for higher capacity production. The powder dissolver secure efficient mixing of liquids, including emulsification. It is also ideal for mixing concentrates and minerals into base concentrates and slurries, for example oils into non fat milk concentrates. The mixers can handle products up to 300 cP. The main product is pumped through the mixer. Additives are pumped into the main stream by the inlet pipe. Mixing then takes place and the blended product passes through the turbo unit for final mixing before it goes to the outfeed. Motor power: 15 kW. Input pressure: - 0,8 / + 1,0 Bar. Input temperature: 0 / + 120 °C. Output pressure: -0 / + 2,0 Bar. Output temperature: 0 / + 120 °C., Additional features:, Excluding:, - Hopper, Type of Machine: Powder dissolver, Capacity: up to 25.000 ltr/h depending on pr ...

Complete falling film vacuum evaporator, previously used for infant milk, consisting of 5 bi-thermal effect TVR Evaporator with a direct steam injection (DSI) pasteurizer and an expansion chamber. Still mounted in the Danone plant in France till end of March 2026. The product feed rates in the installation can vary between 14 and 23 t/h with a comparative temperature between 78 and 54°C from the 1st to the 5th effect. The system is heated primarily by injecting steam into the thermo-compressor. The preheating of the incoming product is achieved via tubular heaters supplied by vapours drawn from the beams. A direct steam injection pasteurizer and expansion chamber is provided to pasteurize the product in a range of 118 to 133 °C., Line modified in 2000 to replace the mixing condenser with a tubular condenser and installing the heat treatment with direct steam injection., The evaporator  ...

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

The dynamic in-line flow mixer type RM offers performance, precision and hygiene for the food, chemical and plastics processing industries and for numerous other process mixing processes.The performance spectrum of the dynamic flow mixer RM includes stirring, mixing, gentle mixing and blending, reacting, diluting, coloring, homogenizing and much more. Drive with tubular housing and mixing shaft running therein. Welded mixing elements. Mechanical seal. Vertical design with foot flange. It is a dynamic flow mixer that is suitable for CIP (Cleaning in Place). Capacity: up to 4.000 ltr/h. Lenght of the rotor: 425 mm. Inside diameter of the house 130 mm. Connections in / out: DN65. Motor: ± 3 kW (not visible on nametag) - 400 V - 50 Hz., Type of Machine: Inline mixer, Capacity: up to 4.000 ltr/h, Length of rotor: 425 mm, Inside diameter of the house: 130 mm, Motor: ± 3 kW (not visible on na ...

2 x Battenfeld injection moulding machines type: TM 180/750 BJ 2010

Four-sided planer copper mill Model: VUIN 605 Planing width 605 mm Planing height 200 mm between upper and lower planing shaft Planer heads rear left and right All planing shafts as 4-knife shaft Automatically adjustable table height with dressing table adjustable up to 12 mm Dressing table with table extension Feed rate 7-9-11,5 / 14-18-23 m/min. 3 fluted feed rollers 3 smooth table rollers 1 smooth pull-out roller

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UHT Pilot Plant APV Tube Heater Capacity: approx. 100 Ltr./h - Tube heater - 2 process tanks with a capacity of approx. 70 litres each - High-pressure homogenizer APV LAB 100 - PWA Cooler

Table fat maker Jufeba T 01 2 immersion grids with draining tray and steam lid Grease pan heating manual Connection 400V, 16A-CEE plug Used device cleaned

Planetary mixer Varimixer Bear AR60/VL1 Bj.2016 - Planetary mixer / planetary mixer - Manufacturer: Varimixer Bear - Model: AR60/VL1 - with a 60 litre boiler - Incl. whisk, flat beater and dough hook - With plastic protective cover with circuit breaker - Analog control Technical data: - Year of construction 2016 - Voltage: 400 volts - Motor: 1.9kW - Plug: 1x 16A plug More pictures and information as well as transport on request.

Fat Baking Appliance Roka / Kippfix T 40-E Fat baking station T 40-E Easy to use for approx.: 360 pcs/hr. donuts / doughnuts 1 baking basket & 1 steam lid Drip tray right 5 ALU digestate carriers Robust technology Connection 400V, 16A-CEE plug Used device

Planetary mixer Hobart H 600 60 litre stainless steel kettle with 1 whisk and 1 flat beater Connection 400V, 16-CEE plug Used machine from the bakery

Fat baking machine Reimelt EL 6/1000S-2 Fat Baking Machine with pass pass 1/1000 S for piping cakes and donuts Turning device with automatic removal device Extractor hood with extinguishing system device Stainless steel version Connection 400V, 63A-CEE plug Approx. dimensions: 5400 x 1310 x 1600 mm, WxDxH Used machine

4 ROLL HYDRAULIC DUAL PRE-PINCH 3000x15 MM PLATE BENDING MACHINE NEW Brand MG model M3015 -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat -safety and emergency systems installed -manuals and schematics along with the machine

used sourdough plant Isernhäger B 300Â Product descriptionManufacturer : IsernhägerType : B 300Sourdough stirring kettle Sourdough containerIsernHäger the baking culturecompletely in stainless steelKettle capacity 300 liters Mobile on rollsDetails see pictures.

MPB Plum Pitter Plum Pitter Product description Manufacturer: Gustav Blickle Type: MPB Item condition: used, in working order - please clean thoroughly before use Electric plum pitter The machine is a semi-automatic machine - it has to be manually loaded with fruit. The lid is missing 400 volts at the top, see pictures for details.

Fat baking planks with attachment Tilting planks 2 carriages 39 pieces Tilting planks dimensions : W: 99cm D: 81cm H: 6cm Grease baking appliance Attachment Outer dimensions : W: 182cm D: 84cm H: 16cm Details see picture

Sheet Metal Cleaning Basin Fresh Manufacturer : Fresh Type : Spritzmatic Exterior Dimensions : W: 122cm D: 33cm H: 86cm Interior Dimensions : W: 102cm D: 29cm H: 70cm Cleaning for 60x40cm and 60x80cm wide trays on casters Details see picture   

KNITTING PLATE FOR ERIKA REKORD SEMI-AUTOMATIC SIZE 2 30 PCS ( 3 pieces )for all semi-automatic machines size 2 very high quality product made of very durable plastic30 pieces5 mm thickDetails see picture

Fermentation belt carrier tilting planks with trolley32 pieces tipping planks with trolleyManufacturer: RingoplastType: Baked goods CombiDimensions: 580x390x48 mmInner dimensions: 567x377x45 mmMaterial: PolypropyleneWeight: 950 gWe have several in stockShipping costs please ask for details see picture

FORTUNA KNITTING PLATE SIZE 4( 3 pieces )For fully and semi-automatic machines of the manufacturer Fortuna size 4very high-quality productmade of very durable plastic30-piece5 mm thickDetails see picture

KNITTING PLATE Â for ERIKA REKORD BEAN-TO-CUP MACHINE SIZE 2 ( 3 pieces )for all bean-to-cup machines size 2 very high-quality product made of very hard-wearing plastic30-piece5 mm thickDetails see picture

KNITTING PLATE Â for ERIKA REKORD FULLY AUTOMATIC MACHINE SIZE 3 ( 3 pieces )for all fully automatic machines size 3 very high quality product made of very durable plastic30 pieces 30-100g5 mm thickDetails see picture

FORTUNA KNITTING PLATE SIZE 3 ( 3 pieces )the above price is for 3 piecesFor fully automatic and semi-automatic machines of the manufacturer Fortuna size 3very high quality productmade of very durable plastic5 mm thick30 piecesDetails see picture

EBERHARDT KNITTING PLATE SIZE 4 ( 3 pieces )for the Optimat and Piccolo models size 4 of the manufacturer Eberhardt for all fully automatic and semi-automatic machines size 4 very high quality product made of very durable plastic30 pieces 5 mm thickDetails see picture

WP KNITTING PLATE SIZE 3, 22 PCS ( 3 pieces )22 pcs.for all Rotamat and 3/4 vending machines from W&, Pvery high quality product made of very durable plastic5 mm thickDetails see picture

WP KNITTING PLATE SIZE 3, 30 PCS ( 3 pieces )30 pcs.for all Rotamat and 3/4 vending machines from W&, Pvery high quality productmade of very durable plastic5 mm thickDetails see picture

EBERHARDT KNITTING PLATE SIZE 2 ( 3 pieces )for all fully automatic and semi-automatic machines size 2 very high quality product made of very durable plastic30 pieces5 mm thickDetails see picture

KNITTING DISC FOR ERIKA RECORD SIZE 4 30 PCS ( 3 pieces )For fully automatic and semi-automatic machines Erika Record size 4very high quality productmade of very durable plastic30 pieces5 mm thick40-120 grams per dough pieceDetails see picture

EBERHARDT KNITTING PLATE SIZE 3 ( 3 pieces )for the models Optimat and Piccolo size 3 of the manufacturer Eberhardtfor all fully and semi-automatic machines size 3 very high quality product made of very durable plastic30 pieces5 mm thickDetails see picture

Baking Plate / Stone Plate / Oven Plate for Miwe Condo 800x1250x15mm NEWBack Plate / Stone Plate for Miwe Condo Oven Dimensions : 800 mm x 1250 mm x 15 mm Thickness 15mm Weight 30kgwe have other size and assortment in stock Details see pictureAttention: No shipping only pickup. Shipping by forwarding company from 10 pieces on request

 Quail Piccolo  Baking plate / stone slab NEW : 865 mm x 600 mm x 15 mmThickness 15mm Weight 16kgAttention: No shipping only collection. Shipping by forwarding company from 10 pieces on request

Baking plate / stone plate / oven plate for quail Piccolo 798x670x15mm NEWBack plate / stone plate for quail Piccolo oven dimensions: 798 mm x 670 mm x 15 mm thickness 15mm Weight 16kgwe have other size and assortment in stock Details see picture Attention: No shipping only pickup. Shipping by forwarding agent from 10 pieces on request 

Oven plate / stone plate for MIWE Condo NEUMaE : 625 mm x 815 mm x 13 mmThickness 13mm Weight 12.7kgAttention: No shipping only pickup. Shipping by forwarding company from 10 pieces on request