pl used for sale

Key data: 400 mm, 2100 mm, 3 St.

SPECIFICATIONS: Table dimensions: 2100 x 400 Roller with 3 knives EQUIPMENT: 01 Knife adjustment device 03 Spare blades

SCREW : 100MM MOTOR : 45 KW REDUCER : ZLY250 SPEED : 250 250KGS/HOUR REMARKS : 1)WOODEN CASE PACKAGE 2)NOT INCLUDE INSTALLATION COST 3)SINGLE SCREW EXTRUDER (1 PCS) 4)MOULD (1 PCS) 5)COOLING FLUME (1 PCS) 6)DRY MACHINE (1 UNI) 7)ELECTRICAL CHANGE NET SYSTEM (1 UNI) 8)PELLETIZER (1 UNI) 9) high temperature wire (FOC 30 m) Pelletizing Auto Pusher + Conveyor #1

Pressure plate punch Beil 780/425-S-H-AP2; cleaned and tested; die-cut 780 and 425 mm autoplate; Investment Contact. Plate punch hatchet 780/425-S-H-AP2; cleaned and checked; punch size 780 and 425mm Autoplate; contact for plate.

Key data: 1470 mm, 1400 mm, 750 mm

2 Cast iron V supports Width: 1400 mm Height: 1370 mm Base depth: 750 mm Slot width: 200 mm V width: 940 mm V depth: 430 mm Total height under sole: 1470 mm Weight: 2,3 T / unit

Planer and moulder with grinding unit Position 1. Abricht Spindel Position 2. Right Vertical Spindle Spindle Position 3. Left Vertical Spindle Position 4. 2. Right Vertical Spindle Position 5. 2. Left vertical spindle Position 6. Upper Horizontal Spindle Position 7. Bottom Horizontal Spindle Position 8. Grinding unit at the top Position 9 Grinding Unit Bottom Position 10 Universal Spindle

Key data: 6 , 190 mm, 120 mm

SPECIFICATIONS: Feed length: 1900 mm Machinable width: 190 mm Machinable height: 120 mm Spindle Ø 35 mm Number of Spindles: 6 Chain drive SPINDLE CONFIGURATION: Bottom (3 kW) Right (2.2 kW) Top (4 kW) Bottom (4 kW) Right (4 kW) Left (4 kW)

A complete bulk powder coating system MEEH powder coating and dust filter system is available. Product dimensions X/Y/Z: 8000mm/800mm/3000mm, max. product weight: 1000kg, total surface area of all openings: 12.9m², max. permissible powder injection quantity: 90kg/h, extraction capacity: 18000m³/h, total system dimensions X/Y/Z: approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air: 8bar, connected load: approx. 30kW. 1) Manual powder stand with suction, internal dimensions X/Y/Z: 10m/3m/4m, external dimensions X/Y/Z: 10040mm/3370mm/4600mm. 2) Chamber dryer MEEH KTÖ240, year of construction: 2008, air capacity: 30000m³/h, heat output: 240kW, burner: Weishaupt, burner year of construction: 2019, fuel: heating oil, internal furnace dimensions X/Y/Z: approx. 8530mm/4610mm/5840mm, external furnace dimensions X/Y/Z: approx. 8200mm/3500mm/4000mm. 3) Lifting and lo ...

Year: 2008 - technically efficient, ready to work – after full service - chiseling up + down - PLC control - feeding table

Clamping force: 1250 kN Ø worm: 35 mm Column spacing: 470 mm Injection weight: 142g Min. mould height: 300 mm Total weight: approx. 6,000kg

Weinig Unimat 17 four-sided planer Working width 170mm Working height 140mm Number of spindles 6 Spindle arrangement Bottom 5.5kw Right 5.5kw Left 5.5kw Top 7.5kw Bottom 5.5kw Universal 5.5kw Adjustable heads Feed speed adjustable via variator 6-36m/min Drive on cardan shafts Feed motor 5.5kw Pneumatic material clamps Total power 41kw

SCM FS410 NOVA planer Working width 410mm Working height of the thicknesser 220mm Thicknessing table mounted on 4 supports Two planing speeds with a thicknesser of 6-12m/min 4-knife shaft Shaft with tersa knives Planing shaft diameter 95mm Shaft speed 5000r.p.m Additional fence for planing low workpieces with a planer Motor power 4kw Planer tops length 2200mm Slotting and drilling unit CE Certified Technical documentation

Key data: 4 , 180 mm, 105 mm

Profiset 40 EP with 2 axis control and 99 programs Finished size maxi. 180.mm / mini. 25.mm Engines. 2 x 7.5 KW 380 V. 50 H. Dressing table 2300 mm Feed roller in front of the dressing room 4 x planer heads TERSA Suisse 1st year warranty after delivery and commissioning

Key data: 250 mm, 750 mm, 2 St.

ABH (Beuving) Chico Vlakbank Merk: ABH Type: Chico A3 Schaafbreedte 250 mm Spaanafname Max. 8 mm Aanvoertafel 750 mm Afvoertafel 750 mm Total panel length 1,500 mm Chisel-as Z-2 ø90 mm

Key data: 170000 KW

Fully Equipped Diesel Power Plant – Over 170 MW Capacity This opportunity is not yet on the market — and won’t be found anywhere else. Contact us now to receive exclusive details and position yourself ahead of the market before the sale is public. END USERS ONLY

40 cut plates with 13 rails Total price Bakery condition Different insertions

Key data: 500 mm, 8 mm, 6 kW

Martin T54 Surface Planer, with Tersa Z-4 and Hydraulic Table Lift Brand: Martin Type: T54 Year of Make: 1997 M. No.: V240171 Motor power: 5.5 kW Knife shaft: 5,000 tpm Z-4 Tersa Solid Steel Shaft ø125 mm Planing width: 5 Spahn removal: 8 mm Table length: 2,850 mm Task - table length: 1,640 mm Acceptance - table length: 1,200 mm Table height: 855 mm Dressing fence: 45° tiltable with Dun planing bar and width adjustment on lineair guides Weight: 1,200 KG Option: SuvaMatic protection device Condition: Full-function tested

Key data: 500 mm, 1640 mm, 4 St.

Martin T52 Surface Planer Brand Martin Type T52 Year of manufacture 1987 M. Nr V 151674 Motor power 5.5 kW (7.5 hp) Knife shaft speed 5000 rpm Knife shaft Z-4 Circle ø125 mm Planing width 500 mm Blade length 510 mm Spahn removal 8 mm foot pedal adjustment with display at table level Table length 2840 mm Task - Table length 1640 mm Acceptance - table length 1200 mm Table height 800 mm Dressing tank 1,100165mm Tilt 45° Weight approx. 950 KG Condition: Function tested

Key data: 500 mm, 1640 mm, 4 St.

Martin T52 Surface Planer Brand Martin Type T52 Year of manufacture: 1986 M. No V144098 Motor power 5.5 kW (7.5 hp) Knife shaft speed 5000 rpm Knife shaft Z-4 Tersa Circle ø125 mm Planing width 500 mm Blade length 510 mm Spahnabnahme Praxis 16 mm foot pedal adjustment with display at table level, limited to 8 mm for safety. Table length 2840 mm Task - Table length 1640 mm Acceptance - table length 1200 mm Table height 800 mm Dressing tank 1,100165mm Stop tilt 45° Weight approx. 950 KG Condition: Function tested

Key data: 630 mm, 8 mm, 8 kW

Panhans 446-B Dressing-Thickness Planer Combi Machine Brand: Panhans Type: 446B Year of Make: 2005 Planing width dressing/thickness planer: 630mm Knife shaft: ø120 - Z-4 Speed: 5,000 rpm Engine: 7.5 kW Planing height: 4- 225 mm Table length dressers: 2,250 mm Table length thicknesses: 1,040 mm Extra Uitvoer taflelengte: 1.000 mm, automatische hoogte versetlling met tafelblad Chip removal: max. 8 mm Feed: 7 + 14 m/min. Weight: 1,300 KG Extraction ø160 mm Condition: Fully functional tested

30 Round Knitting Plates Casting 7 pcs Different sizes and machines Bakery condition Partly slightly damaged Total price

1,216 liter turbo stirrer for spray cream 2 pieces with mixing table Characteristics: Volume container 1 1216 liters Volume container 2 1216 liters material V2A (AISI 304) 1.4301 Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Total height 2700 mm Width 2000 mm length 6000 mm Number of feet 4 Description MJ UNI-HIGH Consists of 3 parts with pedestal Part 1/3 Mixing table Dimension: Length: 1,750 mm Width: 800 mm Height: 1,300 mm Part 2/3, 3/3 per container with a capacity of 1,216 liters Dimension: Total height: 2,700 mm Cylinder height: 1,250 mm Inner diameter: 1,150 mm Container description: Topsoil: Lid with 1/3 flap at the front and back with grid Propeller agitator Underbody: Residual drain pipe connected to line 4 fixed feet on each frame

PART NUMBER: 7679 SPECIFICATIONS - max planing width 610mm - max planing height on both sides 200mm - electric top, up/down adjustment - max planing height on four sides 100mm –in advance: - Pulling insertion shaft, toothed - Flingers -Pressure - 2 pulling shafts, toothed -Pressure - planer shaft 610mm, 4-knife 7.5kW -Pressure - pulling shaft, smooth, outfeed – from below: - guide strip - pulling roller, toothed - planer shaft 610mm, 4-knife 5.5kW - 2 smooth, pulling shafts –behind: - 2 side spindles + clamp 1) Vertical right 100mm 4kW 2) Vertical left 100mm 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - Manual planing width setting - 6 types of feed speeds: 7/9/11.5/14/18/23m/min - feed motor 3.1kW - dimensions length/width/height 2500x1800x600mm - weight about 3000kg ADVANTAGES – ideal for processin ...

Weinig Uniplan Hydromat with jointer 220mm

Key data: 520 mm, 3000 mm, 4 St.

SPECIFICATIONS: 2 work tables Dimension of the two tables: 3000 x 520 mm Roller with 4 knives RPM: 5000 RPM Installed power: 4 kW

45 litre, Stock number: R498, Planet mixer, stainless steel,, Maren type F45., 4 gears., Timer function., Accessories:, -2 pots, -1 dough hook, -1 whisk, -1 spatula, Litre: 45, Material: Stainless steel AISI 304

215 litre, Stock number: R1203, Litre: 215, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Agitator type: Anchor agitator with scrape and with homogenizing agitator in the bottom, Double jacket: Yes, Insulated: Yes, Outer cladding: Stainless fully welded, Manufacturer: Becomix, Model/type: RW 125, Year: 1990, Other: Without control panel

27 litre, Stock number: R544, Planet mixer, stainless steel,, Bjørn type R27., Variable speed., Removable vat, Ø 340 mm., With mixing tools., Litre: 27, Material: Stainless steel AISI 304

40 litre, Stock number: R566, Planet mixer, stainless steel,, Blomqvist type SV 40/20., Several speed., Ø 420 mm vessel., Litre: 40, Material: Stainless steel AISI 304

45 litre, Stock number: R256, Planet mixer, stainless steel,, Maren type F45., 4 speeds, timer function., Ø 400 mm., Liter: 45, Material: Stainless steel AISI 304

35 litre, Stock number: R333, Planet mixer, stainless steel,, Bjørn type Varimix, stainless cabinet., Removable product vat Ø 340 mm., Variable speed., Litre: 35, Material: Stainless steel AISI 304

1,5 litre, Stock number: R1196, Double plantary mixer, stainless steel/coated,, Ross type DPM-1P., 0,37 kW motor with variable speed,, 380 V., Work capacity 0,25-0,5 litres,, pneumatic height adjustable function., Prepared for vacuum., Litre: 1,5, Material: Stainless steel AISI 304/coated

5,7 litre, Stock number: R1183, Double planetary mixer, stainless steel,, Ross type LDM-2., Double jacket., Variable speed 20-100 rpm., Removable pot., Litre: 5,7, Material: Stainless steel AISI 304

0,5 litre, Stock number: R024, Double planet mixer, stainless steel,, Telavox,, Ø 100 mm., Liter: 0.5, Material: Stainless steel AISI 304

Stock number: F789, Packing unit,, Consisting of:, Wrapping welder, PMN, type BSM600. 380 V., Manuel straight passage., Inside dimention: W 600 x H 300 mm., Outer measures: L 1100 x W 1250 x H 1650 mm., Shrinking tunnel: PMN, type LPM600. 18 kW, 380 V., Variable speed of band., Inside dimensions: W 600 x H 300 mm., Outer measures: L 3000 x W 1150 x H 1850 mm.

Stock number: F524, Packing unit, stainless steel,, Østerbergs, 11 kW, 380 V., Banderole welder with automatic side lead-in,, shrinking tunnel and Teflon band., Max. size W 650 x H 300 mm., Outer measures L 3450 x W 1350 mm., Material: Stainless steel AISI 304, Item: Max W 650 x H 300 mm.

1.600 litre, Stock number: T3890, Tank, plastic,, open top, standing in a leg stand., Conical bottom,, inner overflow/drain., Frame agitator from top,, Ø 1330 mm., Litre: 1.600, Material: Plastic

2.200 litre, Stock number: T3891, Tank, plastic,, open top with strengthening ring., Bridge on the top,, 2 x 1/2 lids on the top., Standing on a plain bottom,, 2 x turbulence plates., Ø 1500 mm., Litre: 2.200, Material: Plastic

290 litre, Stock number: T3703, Hopper, plastic,, open top with lid, standing in stainless leg frame., Conical bottom,, sliding draught in the bottom., Ø 760 mm., Litre: 290, Material: Plastic

3.000 litre, Stock number: T3599, Tank, plastic,, closed top, standing., Agitator from bridge in the top., Ø 1400 mm., Litre: 3.000, Material: Plastic

3.000 litre, Stock number: T3598, Tank, plastic,, closed, top, standing on leg frame., Agitator from bridge in the top., Ø 1400 mm., Litre: 3.000, Material: Plastic

2.750 litre, Stock number: T3265, Tank, plastic,, open top with lid., Standing on flat bottom,, strengthening ring in the top., Ø 1510 mm., Litre: 2.750, Material: Plastic

2.000 litre, Stock number: T2957, Tank, plastic,, closed top, standing on flat bottom., Dished top,, Ø 1280 mm., Litre: 2.000, Material: Plastic

175 litre, Stock number: T2244, Hopper, plastic,, open top with lid., Standing in stainless leg rack., Conical bottom., 1 pc. loose lifting yoke., Throttle valve in the bottom., Ø 750 mm., Litre: 175, Material: Plastic

1.700 litre, Stock number: T2015, Tank, plastic,, closed, hanging in mountings., Concial bottom., Agitator from the top., Tank cover in the top., Ø 1250 mm., Litre: 1.700, Material: Plastic

Stock number: D358, Evaporator, stainless steel,, type APV Junior, cap. 80 kg/h., Excl. steering., Material: Stainless steel AISI 304

350 litre, Stock number: D1012, Vakuum udlufter, rustfrit stål,, stående på benkonsol., Dobbeltkappet., Isoleret, udvendig nittet beklædning,, hvælvet top, boltet., Roterende disc, Litre: 350, Material: Stainless steel AISI 304

100 litre, Stock number: R554, Mixer, stainless steel,, HEMA type BRSSF 100, with removable frame agitator,, Approximately 90 rpm., electric heat and control panel., Ø 470 x 640 mm container., 2 pc. outlet., Litre: 100, Material: Stainless steel AISI 304

Stock number: SF169, Kieselgur filtation plant, stainless steel., Consisting of:, Elutriate tank with frame agitator,, Dosing pump, pruduct pump,, elutriate filter, and coarse filter., Mounted on frame with wheels., Previously used for beer and wine, Material: Stainless steel AISI 304

Copper plate for lapping machine. Dia 600mm, NEW, make: Melchiorre, Mimu Machine Tools Gussago BS Italy, Lapping is a machining process in which two surfaces are rubbed together with an abrasive between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called grinding), involves rubbing a brittle material such as glass against a surface such as iron or glass itself (also known as the lap or grinding tool) with an abrasive such as aluminum oxide, jewellers rouge, opticians rouge, emery, silicon carbide, diamond, etc., between them. This produces microscopic conchoidal fractures as the abrasive rolls about between the two surfaces and removes material from both., The other form of lapping involves a softer material such as pitch or a ceramic for the lap, which is charged with the abrasive. The lap is then used to cut a harder mate ...

Filling and packaging plant for vinegar/oil in plastic bottles:, equipped for 0.75 ltr vinegar bottle,, Capacity: up to 4,000 bottles per hour, Consisting of:, 1. Bunker for empty plastic bottles, approx. 6 m long, capacity: approx. 400-600 containers, 2.Kamman bottle sorting system type K23F, The machine ensures that the bottles to be filled are conveyed out of the machine vertically, with the mouth facing upwards, Sorting capacity: approx. 3,000-6,000 pieces/h, 3. Conveyor belts, 4. Lightweight vacuum filler, make Cobert type Olimpia20/95, With 20 filling stations, Dimensions: LxWxH: 1,520x1,250x2,330 mm, Possible bottle diameters: 55-120 mm, Cost 117,000 DM in 1989, 6. Inkjet coder, make REA-JET, year of manufacture 2008, For applying the batch marking or MHD coding to the filled and sealed bottle, 5. Closer for plastic closures, make Zalkin type CA3/320NG, A closing station, Closures ...