pl used for sale

M. No.: 91080-41861 Age : around 1994 Speed: first 70 Sec. / Following 52 Sec. Format (cm): 41,4 x 55 (max.) Equipment / Additional information: Plate width (cm): 22.9 - 41.4 Plate length (cm): 22.0 - 55 Maximum effective image size (cm): 40.4 - 54 Magnification: 100% Lens (cm): 25 Step and Repeat setter: Original side down Digital recording: 0 - 99 Light source: 1 Halogen-Diode, 80 V / 800 W Tank capacity: Activator 0.55 l, stabilizer 0.60 l Power supply: 200 V / 220 V / 240 V, 1.9 Kw High quality plate results: up to 133 lpi

1 aseptic filling Krones PET bottle filling line for bottles with a capacity of 1,500 ml, capacity 20,000 pieces/hour Year of construction 2005, No. 564-045 With sterile tank, capacity 7,500 l with sleever machine on the 1st floor above with Krones bottle cap conveyor. with Krones labeller, built in 2005 with various spare parts, but without PET blow bottles technology and without PTT bottles carton packing machine

KHS can filler, Innofill, 50 filling valves, standard can 500 ml, Sleek can 330 ml, can lid 202, with Ferrum seamer F8, year of manufacture: 2008, with can lid magazine KHS Can Filler Filling Canning, Innofill, 50 Filling valves, Standard Can 500ml / 0.5liter, 50cl, Sleek Can 330ml / 0.33l, 33cl, Can end lid 202, with Ferrum can seamer F8, year: 2008, with can end lid magazine

Four-sided planer Weinig with glazing bead saw Type: P 23 Year of Make: 1995 Planing width 230 mm Planing height 130 mm 6 planing shafts + glazing bead saw Shaft arrangement 1 Bottom 4 kW 2 right-hand lifting spindle clocked with 3 Left 7.5 kW 4 Top-clocked shaft 5.5 kW 5 Bottom 5.5 kW Glass bead saw Spindle diameter 40 mm Right and left shafts are driven by 1 motor with manual Waxilit pump with distributor for extraction pipes fully equipped with planer heads as well as 4 additional milling heads good, ready-to-use condition

Measuring and marking plateCast steel-grey cast iron heavily ribbedLength 1000 mmWidth 1000 mmThickness 54/225 mmWorking height approx. 800 mm- 4 pieces feet with adjustment screws for aligning the plateWeight 390 kggood surface; used

A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioni ...

4 pieces of adjustable jaws INGERSOLL for face plateChuck jaws for lathe chuck, mechanical clamping device, clamping blockNo: 39.02.10000 / 501.397Jaw width 70 mmJaw length 180 mmJaw carrier height 150 mmBase plate 325 x 265 mm- Step jaws for turning as rotary and drilling jaws- Jaw adjustment via trapezoidal threaded spindle- Jaw support with 6 recesses 40 x 30 mm for fastening- Distance between recesses 280 x 133 and 220 x 90 mm (center)Dimensions L x W x H 325 x 265 x 215 mmWeight per jaw 36.5

Working width: 3050mm, material thickness: 6mm, throat depth: 200mm, back gauge adjustment: 1000mm, drive power: 15kW, cutting angle range: 1°-2°, table height: 900mm. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2100mm, weight: approx. 8500kg. On-site inspection is possible.

An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available.

A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 125mm, L/D ratio: 42, extrusion capacity: 650kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/512kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. The system has extensively documented defects.

A planetary saw (inline pipe saw) IPM is available. Max. pipe diameter: 400mm, power: 7kW, machine dimensions X/Y/Z: approx. 4500mm/2000mm/2300mm, weight: approx. 7000kg. Documentation available. On-site inspection is possible.

A Zinser plasma torch cutting system is available. Table dimensions X/Y: 2000mm/6000mm, plasma attachment: Hypertherm HPR260, extraction system: Donaldson, draw channel length: 10m. Including various spare parts for the burner head. The automatic gas console is defective. Documentation available. On-site inspection is possible.

A Graewe planetary saw (inline pipe saw) is available. Max. pipe diameter: 500mm, power: 7.5kW, machine dimensions X/Y/Z: approx. 3500mm/1800mm/2000mm, weight: approx. 3200kg. Documentation available. On-site inspection is possible.

A complete CNC gantry plasma cutting machine ESAB is available. Travel X/Y: 12000mm/4000mm, max. workpiece dimensions X/Y: 12000mm/3000mm, max. material thickness steel: 150mm, total system dimensions X/Y/Z: approx. 15000mm/5200mm/1500mm. System components: Cooling unit Kjellberg KWE 360, gas box Kjellberg PGV 3 and plasma connection Kjellberg PBA-360. The system has fire damage. Documentation available. On-site inspection is possible.

A Weinig four-sided planer including automation, double cross-cut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Kellfass automation unit consisting of double cross-cut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. On-site inspection is possible.

Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible.

A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 145mm, L/D ratio: 42, extrusion capacity: 700kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/609kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible.

Two rolling mills for thermosetting plastics are available. 1) 2x identical rolling mills Berstorff (Krauss Maffei), year of construction: 1959, drive wheel renewal: 2000, working width: 1200mm, roll diameter: 400mm. 2) Big bag frame with electric chain hoist. 3) Suction blower. 4) Engelsmann screening plant. 5) Glass fiber dosing devices. 6) Conveying units, control system and screws. 7) Krauss Maffei test laboratory roller for color determination. Without shredding units. Documentation available. On-site inspection is possible.

: für Stapler lifting capacity: 6600 kg weight of the machine ca.: 2,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630 mm Dimensions (L/W/H): 115x110x120 mm turning speeds: 5000 U/min connected load frequency: 380 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: NA mm y-travel: NA mm workpiece height: mm stroke length max.: 450 mm table length: 450 mm table width: 350 mm total power requirement: 1,7 kW weight of the machine ca.: t dimensions of the machine ca.: m Shaper, horizontal,mechanic,vice hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm total power requirement: 4,5 kW weight of the machine ca.: 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. Manual operati ...

spindle diameter: 125 mm x-travel: 2360 mm y-travel: 1570 mm z-travel: 780 mm w-axis: 410 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conical rounders WP Kemper Output max. 4800 pieces/hour depending on weight Stainless steel version with lubrication & blower Cones and troughs with Teflon coating new approx. 5m effective path for dough weight of approx. 100 to 700 g per na TA (KM channels) Machine mobile Connection 400V, 4 kW, 16A-CEE plug Dimensions: 1500 x 1330 x 1600 mm, WxDxH Used machine overhauled 6 months warranty + spare parts service Option: Maintenance contract Service Package Instruction & Commissioning Visit our large bakery machine exhibition!

HORIZONTAL PLATE FREEZER CABINET, TUCAL MODEL: A.H. + COOLING COMPRESSOR IN NOISELESS CABINET, MODEL: UC Technical description: Serial number: 609 Power supply: 400 V, 3 Ph, 50 Hz Pressure: 7/10 bar Temperature: -35 / +35 ?C Refrigerant: NH3 Dimensions: 3000 x 1300 x 2300 mm Cooling compressor in noiseless cabinet, model: UC Serial number: 304 Year: 10/2015 Bitzer cooling compressor, type: OSNA8571-k Serial number: 1088702179 Dimensions of noiseless cabinet: 3000 x 1500 x 2320 mm

Packaging capacity: 60 cycles/h, max. lifting load: 5kg, carton type: single-wall carton boards, carton dimensions X/Y/Z: 1200mm/800mm/2mm, max. stacking height: 890mm, operating pressure: 6bar, air consumption: 7l at 6bar per cycle. Documentation available. On-site inspection is possible.

A film shrinking system consisting of 5 components is available. 1) 2-part roller conveyor, dimensions X/Y: approx. 4200mm/550mm. 2) Film loading device with cantilever arm for film change, dimensions X/Y: approx. 3600mm/2400mm. 3) Sealing tunnel, dimensions X/Y: approx. 5600mm/1650mm. 4) Packaging turning station, dimensions X/Y: approx. 5450mm/3100mm. 5) Carton stacking machine, dimensions X/Y: approx. 3400mm/3900mm. Total system dimensions X/Y/Z: approx. 22250mm/3900mm/2950mm, packaging capacity: approx. 600-1000/8 hours. Including 47x films, film width: 600mm, film thickness: 55my. On-site inspection is possible.

A complete bottle filling, sterilizing, capping, labelling, cartoning and palletizing line for the wine industry is available. Bottle filling capacity: 4000 bottles/h, bottle format sets: 1l and 0.75l Schlegel/Bordeaux/Bugunder/0.5l/0.25l, sterilizer capacity: 4000 bottles/h, capper capacity: 8000 bottles/h, labelling capacity: 10000 bottles/h, capping capacity: 10000 bottles/h, carton formats: 12 and 6-bottle crates/12 and 6-bottle cartons, palletizing capacity: 1000 cartons/h. Line components: 1) Normpack Compact Form CF 670/980 carton folding machine, year of manufacture: 2000, output: approx. 650 cartons/h, 2) Stork VV-24 L.W. bottle filling machine, Year of manufacture: 1977, 3) Silmo ST XII/110 v ozone immersion bath sterilizer, year of manufacture: 1983, bottle formats: all standard wine bottles, 4) Miho LC 2000 caustic tester, year of manufacture: 2003, 5) Kapsler Robino & Galand ...

A Stummer bale opener is available for opening compressed fiber bales for subsequent feeding. Output basic PES: approx. 1100kg/h, feed conveyor belt length: 5000mm, machine dimensions X/Y/Z: approx. 3550mm/2400mm/3000mm, weight: approx. 5000kg, operating hours: approx. 10200h. On-site inspection is possible.

A concentrate system for thickening and concentrating liquids, typically in the production of juices, concentrates or other liquids in the food industry, is available. Evaporator: horizontal, evaporator stages: 4, operating mode: live steam, heat exchange: preheating/recovery/cooling, condensation: semi-barometric milk condensation, flavor extraction: rectification/floor column. Water evaporation: 4840kg/h, inlet quantity: 6600kg/h, inlet dry matter: 12%, outlet quantity: 1760kg/h, final dry matter: 45%, aroma recovery at 150-fold concentration: 42l/h, steam consumption: 1685kg/h, specific steam consumption: 348g/kg, fresh water consumption: approx. 12700l/h. Documentation available. On-site inspection is possible.

Print technology: Thermal inkjet, max. print width: 914mm, print resolution: 600dpi, media types: Plain paper, coated paper, transparencies. Documentation available. On-site inspection is possible.

Motor power: 0.48 kW/1.9 kW, motor speed: 750 rpm/1500 rpm.

There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available.

A refrigeration system including free cooler, drip tray with substructure, piping, connection lines and control system is available. 1) Eurocooler refrigeration system: Refrigerant: R407C, cooling capacity: 235kW, water circulation rate: 38m³/h, glycol content: 35%, compressor capacity: 80kW, fan capacity: 33280m³/h, condenser surface area: 10.89m². Machine dimensions X/Y/Z: approx. 2200mm/4600mm/2100mm, empty weight: approx. 3150kg. 2) Dry cooler (free cooler) GQ2590.BX, recooling capacity: 233kW, volume flow: 34.9m³/h, air volume: 129000m³/h, surface area: 1844m². Machine dimensions X/Y/Z: approx. 9300mm/2400mm/1600mm, empty weight: approx. 1750kg, working hours: over 70000h. The changeover valve of the compressor of the free cooler is defective. Documentation available. On-site inspection is possible.

A complete LTG Mailänder (now Koenig & Bauer) thermal exhaust air incineration plant is available. Exhaust air volume: 20000Nm³/h, max. solvent volume: 1.5g/m³, max. combustion chamber temperature: 850°C, fuel: natural gas, calorific value: 10kWh/m³, connected load: 45kW, solvent filter capacity: 30kg/h. Documentation available. On-site inspection is possible.

Heads: 4, Feeder slots: 58, Positioning accuracy: +/-0.01mm, Production output: 6000CPH, Camera field of view X/Y at 20µm resolution: 48mm/40mm, Machine dimensions X/Y/Z: approx. 1000mm/760mm/600mm, Weight: approx. 100kg. Documentation available. On-site inspection is possible.

A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On ...

An Aristo plotter equipped for solid and corrugated board with Multihead OT.T.M.P. II-2 is available. Working width: 2000mm, working length: 3200mm, static repeat accuracy: +/-0.08mm, max. speed: 2.3m/s, max. acceleration: 2G, max. material passage height: 55mm, vacuum pump power: 5.5kW. Machine dimensions X/Y/Z: approx. 2700mm/4250mm/1100mm. Documentation available. On-site inspection is possible.

An i-Pulse SMD placement machine with IQ Vision, a subsidiary of Yamaha, is available. PCB thickness range: 0.4mm-4.8mm, min. PCB dimensions X/Y: 50mm/30mm, max. PCB dimensions X/Y: 1480mm/510mm, transport speed: 900mm/s, number of heads: 4, production output: 24000CPH. Placement accuracy CHIP: +/-0.04mm, placement accuracy IC: +/-0.025mm, placement angle: +/-180°, max. component size range: 0402-120mm/90mm, max. component height: 30mm. Machine dimensions X/Y/Z: approx. 1750mm/1750mm/1450mm, weight: approx. 1500kg. Including 3x feeder carriages and 2x tray feeders for installation in the machine. Documentation available. On-site inspection is possible.

Three identical Ishida packing robots are available, suitable for ready meals, meat, poultry, fish and seafood, fresh fruit and vegetables, salads, dairy products, fruit and confectionery. Max. throughput capacity: 80 products/min, max. speed infeed belt: 0.6m/s, max. speed crate conveyor: 0.6m/s, frame dimensions: 2000x1600x2600mm, weight: 1.2t. With documentation, an on-site inspection is possible.

Many different plug-in shelving components (support frames and shelf supports) are available. 65x BITO P2 27/10 support frames, year of manufacture: 2010, dimensions X/Y: 1100mm/3500mm. 42x profile shelf supports BITO PT95L-2.700, year of manufacture: 2010, dimensions X: 2700mm. 28x profile shelf supports BITO PT95L-1.800, year of manufacture: 2010, dimensions X: 1800mm. 108x profile shelf supports BITO PT120M-3.600, year of construction: 2010, dimensions X: 3600mm. 18x Röchling TC 304 support frames, dimensions X/Y: 1100mm/2050mm. 112x Röchling INP 100 profile shelf supports, dimensions X: 3300mm. 28x Röchling TC 304 support frames, dimensions X/Y: 1100mm/3150mm.

Key data: 5000 kN

Offer(4x): Engel Duo 1800/500 BJ./YEAR 2016 38500h

A new CNC plasma cutting machine MicroStep including air plasma power source Hypertherm, nesting program and Aigner filter system is available. 1) CNC plasma cutting machine MicroStep MasterCut Compact, year of manufacture: 2023, processing dimensions X/Y: 3000mm/1500mm, machine dimensions X/Y: approx. 4350mm/2650mm, weight: approx. 3100kg, plasma source: Hypertherm Powermax 45 XP, control: MicroStep iMSNC, operating hours: approx. 2588h. 2) Plasma cutting and gouging unit Hypertherm Powermax 45 XP, max. material thickness: 25mm, max. cutting speed: 500mm/min. 3) Aigner filter system, weight: approx. 500kg. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025.

For sale: Siemens simatic PLC Power supply: SIMATIC 505, type 505-6660. CPU: SIMATIC 505 Type: 505-1104. Stock cards: 3x Type: 504-4332 2x Type: 505-4932A 1x Type: 505-6108 1x Type: 505-7038 1x Type: 505-6208A 1x Type: 505-7339 Order number: 4302.1 For more information, please call or email. Phone: 06-20758459 E-mail: wh.derikxgmail.com The price is subject to 21% VAT.

Key data: 5 , 120 mm, 230 mm

Planing and moulding machine Profimat 23 E Working width: 230 mm Working height: 120 mm Dressing table length: 2000 mm Spindle arrangement 1: Dressing 5.5 kW, 6000 rpm, 40 mm diameter 2+3 Left+ Right 7.5 kW, 6000 rpm, 40 mm diameter 4: Thickness 5.5kW, 6000rpm, 40mm diameter 5: Bottom 4kW, 6000rpm, 40mm diameter Feed motor: 2.2 kW Feed speed infinitely variable 0-24 m/min Milling heads with adjustment gauge Total power requirement: 27 kW Dimensions set-up: 3400 x 1650 x 1970 mm Machine weight, approx.: 3500 kg

Key data: 410 mm, 220 mm

Dressing and thickness planing machine TOP Master FS 410 Function tested Working width: 410 mm Max. planing thickness: 220 mm 4-knife shaft Dressing table length: 2000 mm 2 feed speeds Feed and Pull Roller: Steel Table rollers Tiltable stop Very good condition Weight approx. 900 kg

Production lines: 1. Polyester fiber production line (Chinese brand) Polyester fiber production line, manufactured in 2008, put into operation in 2010. From the end of 2012 until the second half of 2019, fiber production was suspended. The productivity of the line is 10,000 tons of fiber per year. The possibility of producing fiber from primary raw materials - PET granules and from secondary raw materials - PET flakes (recycled PET bottles). The main default raw material (as cheaper) is PET flakes. The available spinneret can be used to produce solid fiber 3, 7 and 15 denier, and hollow fiber, 7 and 15 denier. Hollow fiber can be produced in the "conjugated" type. Can buy and use other denier spinnerete according needs. The main components of the line: Fiber extrusion line • Vacuum dryers, volume 8m3, heated with thermal oil, year of manufacture 2011 – 4 units. ...

MUNK Günzburger Steigtechnik 303406 Aluminum access ladder machine crossing with platform (bridge) 1900-750-2500 RA2414 Technical data: Manufacturer: Munk Günzburger Steigtechnik Type: machine crossing with pedestal Condition: very good (used) Total size: 1900-750-2500 mm (WxDxH incl. handrail) step dimensions: 85 x 600 x 45 mm step/tread height: 230 mm platform dimensions: 800 x 650 mm Platform height: 1350 mm bottom edge 1420 top edge Steps: 6 (5 steps + platform on each side) Maximum working height: 3450 mm maximum load: 150 kg Weight: 38 kg Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag ...

Used line for extruding flat plastic film for grass yarn and carpet yarn Chinese production. The line includes: - Extruder, - Filter mesh machine, - Film extraction and cutting system, including stainless steel water container, - Stretching heating oven, - 3-roll stretching machine, - Fibrillator, - 3-roll annealing machine, - 3-roll cooling machine, - Oil lubricator, - Magnetic winding machine, - Side fiber crusher, - Side blower and waste collector, - Electric control cabinet.

SCM surface planer mod. Used F410 useful working width mm. 410 total length of the tops mm. 2610 Nr. 4 knives Year of manufacture 2000 EC