pl used for sale

Feeding device / bunker for logs, friezes etc. Filling of the bunkers with a forklift from the front Bunker capacity: approx. 5 m3 Logs, friezes or the like can be filled in bulk. The application is carried out via a hydraulically swivelling tilting device. Various conveyors are included in the scope of delivery. These are 2 identical lines that are also offered individually. 1 line was in use for about 1/2 year, the 2nd line is as good as new. See photos

Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial.-No.: 637 Contact length, effective: 1600 mm Pad width: 180 mm Design: smooth pads at the bottom and top Haul-off force: approx. 20,000 N Hail-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.

We offer, in the current state, ex site Fruit juice concentrate plant Was used for apple and sour cherry Manufacturer: Unipektin Year of Make: 1990 Type: Case Film Intake: 23,000 kg/h Water evaporation: 10,000 kg/h Only pre-evaporator with aroma column Machines are dismantled Subject to prior sale

Complete Britas filter with many spare parts. Off site, available immediately.

SARCMI BLUESTAR 2000 Complete PET filling line: Blow Molding Machine - SBO-14 ROUE - 18.200 bph Air Compressor - CE68BSG40 - 38,9 m3/m Air Conveyor Monoblock Filler BLUESTAR 2000 - 1R 54 72/9H - 0,5 l. -20000 bph, 1,5 l. -15000 bph Cap Elevator Labeling Machine ROLLQUATRO F30 - 24000 labels/hour Fill Level Control Device - STRATEC Shrink Wrapping Machine - АРЕТ 143/DF - 20000 labels/hour Bottle and Packaging Conveyor Pallet Stacker - PALKOMBI Series IBP429 - 30 pallets/hour Pallet Wrapper - ROTOPLAT 2000 - 30 pallets/hour All machinery in good condition, complete working line.

Key data: 180 mm

First-class renovated extrusion recycling plant made by EREMA Intarema 2018 TVEplus for the processing of post-consumer polyethylene and polypropylene, capacity up to 2,400 kg/h, built in 2019 for sale. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

faceplate diameter: 400 / 450 mm bore: 100 / 120 mm faceplate - height: 120/165 mm short taper: Din 55022 7 Gr. 11 Four-jaw face plate. Short taper - design, according to DIN 55022/27, size 11, with 6 studs, reversible top jaws, Baking individually via threaded spindles only individually adjustable. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Can filling line, capacity 10,000 - 16,000 cans/hour, 330 + 500 ml, 0.33 + 0.50 standard can 202, depalletizer, filler & seamer 28-4, tunnel pasteurizer, can transport. 22,000 operating hours. Beverage Canning line, capacity 10,000 - 16,000 cph, 330 + 500 ml, 0.33 + 0.50 Standard can, can end 202, depalletiser, Filler & Seamer 28-4, Tunnel pasteuriser pasteurizer, can conveyors, 22,000 operating hours.

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL PAA 9001.25 Year of Make: 2012 CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with power source Kjellberg HiFocus 280i 2 oxyfuel burners propane Beuting vibrating conveyor table Donaldson DFPRO12 filter system for outdoor installation

ECKERT SZAFIR BL2 plasma cutting machine was built in 2022 in Poland by Eckert AS Sp. z o.o. The machine, designed for precision cutting sheet metal made of structural steel, stainless steel and aluminium, is distinguished by its large 6 metre long and 2 metre wide sectional work table. The large area of the table makes it possible to efficiently machine a single oversized workpiece or multiple sheets at the same time, guaranteeing a high level of user comfort through the ongoing elimination of contamination. In addition, the portal structure based on a welded steel profile ensures excellent stability of the machine geometry, which does not become unstable under heavy loads. The SZAFIR BL2 plasma cutting machine has worked approximately 867 hours to date. Technical specifications of the ECKERT SZAFIR BL2 plasma cutting machine - CNC controller: ECS 872 - work table dimensions (L x W ...

Fully automatic cross strapping line Mosca RO-TRI-5 & RO-TR500-4 Condition: overhauled, serviced, fully functional, ready for use Equipped for 5 mm polypropylene strapping Equipped with a baler Output approx. up to 36 packets/min Speed table hinges infinitely adjustable Tape feeding and tape insertion into frames automatically Welding system: Heat wedge welding/welding tongue

Key data: 500 mm, 2850 mm, 3 St.

Power connection 400V 4.0kW Planing width 500 mm Extraction 1x140 mm Stop angle adjustment 3-knife shaft with strip planer blades WxDxH: 2850 x 910 x 940 mm Weight approx. 750 kg Workshop overhauled

Weinig Unimat 1000 Star four-sided planer Working width 20-230mm Working height 8-160mm Number of spindles 6 Spindle system: Bottom 5.5kw 6000r.p.m Right 4kw 7000r.p.m Left 5.5kw 7000r.p.m Mountain 7.5kw 7000r.p.m Bottom 7.5kw 7000r.p.m Universal 7.5kw 7000r.p.m Automatic height and width setting Automatic Countertop Lubrication Pump Countertop driven rollers (1 corrugated roller for wet wood) Pusuw speed adjustable by variator 5-24m/min Weinig EM10 automatic material feeder

USED TETRA PAK A1 TFA 500ML FINO FILLING MACHINE FOR SALE YEAR 2018 Item #: Usm-200 Category Tetra Pak A1 A1-1000 TFA 500ml Filling Machines, Year: 2018, Working Hours only 3422, Speed 9800 Packs Per Hour, Step 1000. The filling machine still on production.

USED TETRA PAK A3 FLEX 1000ML SLIM FILLIN LINE FOR SALE YEAR 2017 Item #: Usm-207 Category Tetra Pak A3 CF/Flex Used A3 Flex 400v 1000ml Slim Filling Line Year 2017 A3 Flex 1000ml Slim Filling Machine, Version 400v, Year of manufacturing 2017, Working ours 4650, Speed 7000 Packs Per Hour Helix Accumulator ACHX 30, Lenght 50meter, Year of manufacturing 2017 Cardboard Packer 32, TCBP 32, Working hours 5450, Year of manufacturing 2017 Tetra Pak Shrink Wrapper, Year of manufacturing 2017 Tetra Pak Cap Applicator, Cap Flex 30, Cap type Helicap 23, working hour 5071, Year of manufacturing 2017 Line Controller 30 plus, Year of manufacturing 2017 Conveyors and Paper trolly PROCESSING EQUIPMENTS: Pasteuriser 8000 LPh, Type C85, Year of manufacturing 2017 Homogeniser, Tetra Alex 30, Year of manufacturing 2017 High sheer mixer, capacity 8000 LPh, Year of manufactuirng 2017 Mi ...

USED TETRA PAK TBA 19 200ML SLIM 20V COMPLETE FILLING LINE FOR SALE YEAR 2006 Item #: Usm-202 Category Tetra Pak TBA 19 TBA 19 200ML SLIM COMPLETE FILLING LINE Filling machine TBA/19 TBA 200 Slim, Version 20V, Year 2006, Working hours 29000 Straw Applicator Tetra Straw Applicator 21 Cardboard packer TCBP 70 Automatic palletisation unit Conveyors & Paper trolly

USED TETRA PAK TPA 19 200ML PRISMA COMPLETE FILLING LINE FOR SALE YEAR 2002 Item #: Usm-203 Category Tetra Pak TBA 19 USED TETRA PAK TPA 19 200ML PRISMA FILLING LINE FOR SALE TPA 19 200ml Prisma Square, Version 10V, Working hours 23000 Straw Applicator Tetra Straw Applicator 21 Cardboardpacker TCBP 70 Automatic palletisation unit Conveyors & Paper Trolly Condition: Still on production.

USED TETRA PAK TBA 8 1000 ML SLIM FILLING LINE FOR SALE Item #: Usm-204 Category Tetra Pak TBA 8 TBA 8 1000ml Slim Filling Machine, version 120v Cap Applicator 30 Flex, for helicap 23 Packer 70 conveyors and paper trolly

USED TETRA PAK A3 COMPACT FLEX 250ML BASE FILLING LINE FOR SALE Item #: Usm-205 Category Tetra Pak A3 CF/Flex A3 Compact Flex 250ml Base Filling Machine, version 200v, working hours 2300, Year 2011 Straw applicator TSA 30, Year 2011 Conveyors and Paper trolly The current pack size on machine is 250ml Base and it can be change to 200ML and 330ml both kits available with machine. The spare parts lot also available. Condition: Tetra Pak maintained and still on production

USED TETRA PAK TBA 19 200ML SLIM 20v FILLING LINE FOR SALE Item #: Usm-209 Category Tetra Pak TBA 19 1-Used Tetra Pak TBA 19 200ML Slim 20v Filling Machine, Year of manufacturing 2004, speed 7500 packs per hour 2-Straw applicator tsa 21, 3-Conveyors and Paper trolly

ZINSER 2425-I plasma cutting machine was built in 2013 in Germany by ZINSER GmbH. The machine, which is designed for precision cutting, marking and bevel cutting of tubes and sheet metal, has AC servo drives with precision planetary gears that guarantee excellent handling characteristics at high speeds and rapid direction changes. For the machining process, plasma or oxy-fuel torches are used, which move along the large work table on two linear guides. A sturdy portal structure with an efficient filtration system further eliminates any contamination, leaving the work area safe and comfortable. All this is complemented by a state-of-the-art CNC control with touchscreen. The ZINSER 2425 plasma cutting machine weighs 1325 kg. Technical parameters of the ZINSER 2425-I plasma cutting machine - CNC controller: ZINSER CNC 5010 - input power: 4000 W - maximum workpiece thickness: 200 mm - ...

USED EVERGREEN GABLE TOP FILLING AND CAPPING MACHINE YEAR 2007 Item #: Usm-210 Category Gable Top Machines Evergreen GTL-30 Gable top Filling Machine, Year 2007, Speed 2400 Packs per hour, cold filling for fresh products

Size 2,000 x 1,290 mm Thickness of the plate 95 mm T - groove width 30 mm Weight approx. 1,700 kg

USED TETRA PAK TBA 19 125ML SLIM FILLING LINE FOR SALE YEAR 1998 Item #: Usm-212 Category Tetra Pak TBA 19 TBA 19 125ml Slim Filling Machine, Version 10v, Year of manufacturing 1998 Straw applicator TSA 21 Tetra Film Wrapper 67 Tetra Packer TCBP 70 Conveyord and Paper Trolly Tetra Pak juice pasteuriser and tetra alex 25 homogeniser also available for sale. Condition: Complete and Running Condition.

USED TETRA PAK TPA 19 330ML PRISMA FILLING LINE FOR SALE YEAR 1998 Item #: Usm-214 Category Tetra Pak TBA 19 TPA 19 330ml Prisma Filling Machine, Version 10v, Working Hour 20500, Year 1998 Tetra Cardboard Packer 70, Year 1998 Easy ride Conveyors and Paper trolly Condition: Good

Size 2,000 x 1,290 mm Thickness of the plate 95 mm T - groove width 30 mm Weight approx. 1,700 kg

Size 2,000 x 1,290 mm Thickness of the plate 95 mm T - groove width 30 mm Weight approx. 1,700 kg

123

Fettbaker Kippfix Roka Werk TW 36-E -with 10 tilting planks Pool dimensions: 50x88cm and 8.5cm high Dimensions: 218cm length 92cm height

T - Slot Plate Field - Test Field Total area approx. 33.54 m² 6 plates 2,000 x 1,290 mm T - groove width 30 mm Thickness of the plates 95 mm Weight approx. 1,700 kg / plate - Price per panel -

spindle diameter: 130 mm x-travel: 10000 mm y-travel: 3500 mm z-travel: 1000 mm Control: Heidenhain type: TNC 155 workpiece weight: 300 t turning speeds: 1620 U/min spindle taper ISO: 50 One direction thrust bearing: 2 Angle head: 2 power capacity: 76 kW Plate area: 12000x9600 mm Thickness: 450 mm rotary table:: Colgar type: TRT1500 mm table surface area: 2000x2500 mm Table load: 20000 kg Travel: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Plate area: 109 m² The floor plate and the table are optional and will be charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 7700 mm y-travel: 1500 mm Control: Siemens type: Sinumerik 840 C spindle taper ISO: 130 turning speeds: 1490 U/min power capacity: 45 kW chip conveyor: Angle head: Angle head: Plate area: 9000x6000 mm workpiece weight: 100 t One direction thrust bearing: total power requirement: kW dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 7200 mm y-travel: 3800 mm Plate area: 9000x6000 mm digital readout: AEG ram: diameter: 440 mm ram: horizontal adjustment: 1000 mm spindle travel: 1500 mm threading cutting device:: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 16000 mm y-travel: 3000 mm taper ISO: 50 w-axis: 1200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 400 mm bore: 75 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 2500 mm y-travel: 1900 mm w-axis: 1100 mm radial face slide travel: mm table adjustable: 1000 mm digital readout: Pfillips workpiece: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 2500 mm y-travel: 2100 mm spindle taper ISO: 50 spindle turning speed range: 5-1000 U/min spindle travel: 900 mm Radial face slide: 650 mm radial face slide travel: 250 mm angular milling head: rotary table:: table surface area: 2000x2500 mm table height: 800 mm table travel: 1700 mm total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: m Table, Floorplate, tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 5000 mm width: 3600 mm number: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3000 mm width: 1300 mm number: 1 T-slot - width: 30/65 mm T-slot - distance: 335 mm number of T-slots: 4 Plate thickness: 350 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The Palttenfeld consists of 9 plates, size per plate 3250x1500 mm, number of T-grooves per column 7, price 1000 €/m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 5200 mm width: 2000 mm Thickness: 400 mm number of T-slots: 6 T-slot - width: 32 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The panel field consists of 5 panels totaling 52m². It can also be purchased individually. Price for 1 m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mm x-travel: 6400 mm y-travel: 3900 mm z-travel: 1450 mm turning speeds: 500 U/min power capacity: 52 kW chip conveyor: digital readout: Plate area: 12000x6000 mm Plate area: 7000x3500 mm Plate area: 93 m² total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m florplates are optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 630 mm total power requirement: kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 0,63x0,63x0,120 m very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 700 mm Thickness: 120 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 4500 mm floor-plate width: 1600 mm floor-plate height: 370 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 4500 mm floor-plate width: 1600 mm floor-plate height: 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 4600 mm floor-plate width: 1620 mm floor-plate height: 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2400 mm width: 3100 mm table height: 660 mm Thickness: 300 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2,4x3,1x0,66 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 9750 mm width: 4500 mm Thickness: 250 mm T-slot - width: 32/48 mm T-slot - distance: 180 mm number: 9 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The Palttenfeld consists of 9 plates, size per plate 3250x1500 mm, number of T-grooves per column 7, price 1200 €/m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

U-Clamp Screw with Plate Fine Measuring Tools Suhl Range: 100 - 125 mm Accuracy: 0.01 mm TGL15046/I with protective box

Screw gauge with plate Fine measuring tools Suhl range: 50 - 75 mm metric including test dimension with protective box