pl used for sale

PART NUMBER: 7343 SPECIFICATIONS - max width of the workpiece 180mm - max height of the workpiece 120mm 4 spindles: 1) Horizontal bottom 180mm 4kW 2) vertical right 120mm 4kW 3) Vertical left 120mm 4kW 4) Horizontal top 180mm 5.5kw - spindle diameter 40mm - all heads adjustable up/down, right/left - pressure on the insertion - 6 leading, pulling, toothed shafts from the top, including 1 double - double lead-out, pulling, rubber shaft at the top - leading, pulling, toothed, wide, metal shaft at the bottom - Lead-out, pulling, metal, smooth shaft at the bottom - feed motor 2.2kW - feed on cardan shafts - Infinitely variable feed speed - Electric planing thickness setting - lifting motor 0.75kW - length of the introductory table 1580mm - extraction spigot diameter 4x120mm - dimensions length/width/height 3040x1500x1700mm - weight about 2800kg ADVANTAG ...

Koening KTW 653 Printing Plate Developing Machine; Condition as good as new; 3 brushes; Inlet width 650mm; suitable for waterless plates; optionally with pressure plate stacker. Plate processor Koenings KTW 653; condition like new; 3 brushes; working width 650mm; used for waterless plates; for option with plate stacker.

Equipped with Rated Input Voltage: 1P AC380V ±15% 50/60Hz; Rated Input Strength: 29A; Rated input power: 19 KVA; Open-circuit voltage: 280V; Output current setting: 30-120A; Rated output voltage: 128V; Cyclic duty cycle: 60%; Efficiency: 80%; Insulation class: F; Protection class: IP21; Non-contact welding (arc formation): No; Maximum cutting thickness 45mm; Unused in box

Compressed Air Plasma Cutting Machine Maximum cutting thickness: 1-40 mm Current: 20-120 Amps Voltage: 310V Single-tube, full-bridge inverter technology, with sufficient output current for high-intensity operations, precisely preset cutting current + adjustable gas delay.

Equipped with input power: 7.6 kVA; input voltage 1-phase 230 V AC 50 Hz; duty cycle 45%; protection class: IP21S; Max cutting thickness: 12mm steel; Unused in box

Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

We are selling here a planetary mixer from the manufacturer Alexanderwerk, type WR40 in a very good used and functional condition. The machine runs on 400 volts, built in 2000, 40 litre boiler, dough hook, whisk, mixing arm, workshop tested, ready for immediate use, dimensions W/D/H 50/90/100 cm, others on request.

Hand-held plate roller; working width 1,050 mm; roller diameter 56 mm; maximum sheet thickness 1 mm; equipped with tilting roller; suitable for conical rolling

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

Compressed Air Plasma Cutting Machine Maximum cutting thickness: 1-40 mm Current: 20-120 Amps Voltage: 310V Single-tube, full-bridge inverter technology, with sufficient output current for high-intensity operations, precisely preset cutting current + adjustable gas delay.

2 pieces tool trolley from Metall Meister, with 12 GEWEFA mounting plates for SK tools. Sturdy steel construction, two storage levels, smooth on four wheels. The cars show age-appropriate signs of wear, but are fully functional. Dimensions (approx.): – Length: 96 cm – Width: 60 cm – Height: 80 cm

Equipped with Rated Input Voltage: 1P AC380V ±15% 50/60Hz; Rated input strength: 14A; Rated input power: 9.2 KVA; Open-circuit voltage: 256V; Output current setting: 20-60A; Rated output voltage: 104V; Cyclic duty cycle: 60%; Efficiency: 70%; Insulation class: F; Protection class: IP21; Welding by contact (arc formation): Yes; Unused in box

composed of Werner & Pfleiderer Dough Divider/Weigher Type V300 (1500) Year of construction 2009 1 chamber machine Weight range: approx. 200 - 1,800 g/piece Output up to 1,500 pieces per hour with lubrication with extended hopper Werner & Pfleiderer conical rounders type CR 59-2002 Year of construction 2006 Weight range approx. 400 – 1,600gr Teflon coated, output approx. 3,600 pcs/h with lubrication, heating and blower Input 3 o'clock Output 12 o'clock Effective length approx. 3m Werner & Pfleiderer long scooter type Combi U Year of manufacture 2005 with flourer, Weight range 200 -2000g Infeed conveyor 30cm wide, with trawl net 30cm wide 70cm long Knitted plate 60x90cm height adjustable from 25 - 85mm Stainless steel clad

Krones VOC can filler with 84 valves, can 211/202, Ferrum F708 seamer 8 heads. Krones Can Filler VOC with 84valves, can type 211/202, with Ferrum Can Seamer with 8 heads.

Trowalization system 2-fold Connection 400V (Opening see sketch)

JET Thickness Planer JWP-12 Max. planing width 318 mm Thickness Clearance 6-153 mm Power 230 V, 1.8 kW Dimensions LxWxH 70 x 60 x 50 cm Weight approx. 33 kg WE share possible !

NEW, Not used in box Mounting: IMB3 / IM1001 (foot-mounted) Efficiency class: IE3 Power: 3.0 kW Speed: ~2896 rpm (50 Hz, 2-pole) Voltage: 400 V (Δ) / 690 V (Y) typical Frequency: 50 / 60 Hz Current: ~5.4 – 9.7 A (depending on wiring) Cos φ: ~0.90 – 0.92 Duty: S1 (continuous) Insulation class: F Protection: IP55

Antistatic industrial flooring, grey mottled used, good condition Click plates Thickness: approx. 10.4 mm Different sizes available: ca. 410 pcs. Abm. approx. 600 x 600 mm approx. 129 pcs. Abm. approx. 600 x 300 mm ca. 90 pcs. Abm. approx. 1,000 x 600 mm ca. 40 pcs. Abm. approx. 1,200 x 600 mm ca. 3 pcs. Abm. approx. 600 x 530 mm Price: on request Location: Bochum Intermediate trade reserved

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Nominal Input Strength: 29A Rated input power: 19 KVA Open-circuit voltage: 280V Output Current Setting: 30-120A Rated output voltage: 128V Cyclic duty cycle: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact welding (arc formation): Yes

V6 30 degree T mold set; length approx. 3.1 meters

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Nominal Input Strength: 29A Rated input power: 19 KVA Open-circuit voltage: 280V Output Current Setting: 30-120A Rated output voltage: 128V Cyclic duty cycle: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact welding (arc formation): Yes

2 KW, 400 V, 50 Hz, 3-knife shaft 250 mm, Chip removal max. 3 mm, Thickness height max. 180 mm, Dressing tables each 525x255 mm, Thickness table 600x250 mm, Dressing stop adjustable up to 45°, Suction nozzle 100 mm, Weight 147 kg

"EIAA x BATES :: Certified Preowned" We can offer you permanently revitalized filling systems for all areas of application. OFFER: BATES ultrasonic sealing device for valve bags with external valve. Sack stoppers, position sliders, ultrasonic clamps made of stainless steel. Control cabinet new, incl. PLC (Siemens) and ultrasonic generator. Complete refit 2024. For integration into the full bag transport in the direction of palletizing. Very high output, as it is not placed directly on the filling machine - up to 500 cycles per hour possible. Addition of corresponding filling systems (valve packers, air packers) possible Addition of an empty bag magazine and bag attachment machine possible - delivery time approx. 12 weeks from order Addition of a palletizing robot possible - delivery time approx. 12 weeks from order Over 35 years of experience in the fi ...

Unused Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated Input Power: 5.5KVA Open circuit voltage: 243V Output current setting: 20-40A Rated output voltage: 96V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc flash due to contact Weight: 6.9KG Dimensions: 375 x 155 x 300

equipped with backgauge, foot control, angle guide.

Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)

Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Rated power: 19 kVA; Rated current: 29 A; No-load voltage: 280 V; Output current adjustment: 30-120 A; Rated output voltage: 128 V; Max cutting thickness: 45 mm; Cyclic duration factor: 60%; Efficiency: 80%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact 6093

Spare parts for Battenfeld injection moulding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets

Equipped with Rated Input Voltage: 1P AC380V ±15% 50/60Hz; Rated Input Strength: 29A; Rated input power: 19 KVA; Open-circuit voltage: 280V; Output current setting: 30-120A; Rated output voltage: 128V; Cyclic duty cycle: 60%; Efficiency: 80%; Insulation class: F; Protection class: IP21; Non-contact welding (arc formation): Yes; Unused in box

P427 - used approx. 30 m³ / 30,000 litre HDPE tank, plastic tank, double-walled, flat-bottom tank. Technical details: Content: approx. 30 m³ / 30,000 litres Material: HDPE tank, plastic tank Manufacturer: Formoplast Specific gravity: min. 1.55 kg/L Dimensions: approx. Ø 3.49 m × H total approx. 5.50 m Certification mark: PA-VI 321.103, AHL/ASL listed Other: Used HDPE tank in good condition, inside professionally cleaned, from the outside as shown in the pictures. Above-ground storage tank for outdoor installation, standing on flat floor, double-walled with outer tub, dome on top of the roof, several inlets and outlets, opaque, incl. railing on top of the roof. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. If the ladder fits on the truck, it can be supplied. This container can be used as a storage tank for many different media ...

Martin/Geel/Miller/Engl weld-on plate with retaining lugs Size M03 35mm shaft diameter 184mm internal widths 180mm shaft spacing

150 litre, Stock number: R1209, Litre: 150, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Planetary mixer, Standing: On legs, Motor: Variable speed; 4,4 kW - 380 Volt, Inner diameter: Ø 590 mm., Dimensions: L 1070 x W 850 x H 1760 mm, Manufacturer: Bjørn Varimixer, Type: R150

PLENTUM, INTERCOOLER INLET

Inv. Num. : 7817 Type: RUR 2500 G Producer: PIERCE Created: 2014 Parameters: Work table length: 6000 mm Work table width: 3000 mm Maximum sheet thickness when cutting: 120 mm Equipment: Rails Burning Machine Baths

Key data: 410 mm, 2 St.

Loading table each 1200 mm, 4 Kw, weight approx. 500 kg

100 litre, Stock number: R1256, Litre: 100, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Planetary mixer, Standing: On legs, Motor: Variable speed; 2,98 kW - 3 x 380 Volt, Inner diameter: Ø 500 mm., Dimensions: L 800 x W 650 x H 1470 mm, Manufacturer: Bjørn Varimixer, Type: R100, Year: 1986

Fully automatic system for filling nested disposable syringes and closing with plunger stoppers, consisting of 4 Bausch+Ströbel components: • TUM 9070 Tub unpacking machine for removing the cups from the bag using a sliding device • DVE 9070 Cover and protective film removal • SFM 5072 Filling and sealing machine • NTS 8140 Transport system • Output max. 36,000 disposable syringes/h, infinitely adjustable • For disposable syringes 0.5 - 10 ml depending on format set • For plunger stoppers diam. 5.00 - 21.00 mm, H 7.00 - 15.00 mm depending on format set • For 100 mm nest • For tub H max. 130 mm • Parts in contact with the product made of stainless steel AISI 316L • IQ/OQ qualification documentation in accordance with Annex D5 GAMP 5 and Annex 15 EU-GMP in English • Calibration (KAL) for all process-relevant measuring systems • Material specification • PLC Siem ...

Chip press for the recycling and compaction of plastic chips (which are shredded if necessary) from machining by converting them into cylindrical briquettes. When it comes to disposing of PU or EPS chips, the Styrotec briquetting press saves a lot of money and increases profits by turning waste into a resource. The chip press can be installed both indoors and outdoors. Briquette diameter: 55 mm Hopper dimensions (diameter): 1000 mm Throughput: 30-75 kg/h Motor pump power: 5.5 kW Dimensions of the briquetting press: 1,100 x 1,460 x 1,600 mm Weight: 565 kg

KT7 CNC KSP 150-300 SPEED plasma cutting machine was manufactured in 2019 in Poland. The machine, designed for precision machining of workpieces with a maximum weight of 4 tonnes, is an excellent choice for small businesses as well as for large industrial plants. Its compact design and all components have been fully galvanised to prevent rust and guarantee trouble-free operation throughout its lifetime. The SPEED KSP 150-300 plasma cutting machine is also equipped with, among others, a WALTER refrigeration dryer and many useful systems that increase precision and production efficiency. The total weight of the machine is 850 kg. Technical specifications of the KT7 CNC KSP 150-300 SPEED plasma cutting machine - work table dimensions (L x W): 3000 x 1500 mm - maximum sheet metal weight: 4000 kg - feed range in Z axis: 110 mm - travel speed: 25000 mm/min - working speed: up to 10000  ...

Card packaging system CR80/ISO7810) formats (e.g. telephone cards). The plant can wrap the cards individually in foil and also form a chain with 50 cards. In the end, the cards are automatically packed as a block. A camera is used to record a code for quantities and product control. Details: High-speed packaging machine for CR80/ISO7810) formats • Output up to 700 products/minute • 4-sided ultrasonic weld seam • High-speed feeder with servo motors for reliable separation • Chains of 5, 10, 15, 20, 25 to 50 as well as single cards. • 2 feeder feeders for card and insert • 2 camera systems from Quali Vision, for checking the sequence and in the outer packaging for labeling • Windows 2000Professional as a production system • Paternoster for destacking in the zig-zag process • Cross transport on outer packaging machine • Marden Edwards Series 4 LX12 ...

Qty. 1 Second-hand can filling line Mfc.: KHS, Roteg, Bizerba, NSM, Videojet, GFKK, Beyer Maschinenbau GmbH, M.J. Maillis, Rudert Edelstahl Technik GmbH, Ullrich Gmbh Built: 2007 - 2014 Stopped: 12/2023 Can sizes: 3.1 L & 5.0 L Filling product: Pilsener & Wheat beer Filling temp.: 4°C CO2 – Volume max. Pilsener: 5.5 g/L Wheat beer: 6.5 g/L Capacity: Can size: 3.1 L 650 cans/h of pilsner 600 cans/h of wheat beer Can size: 5.0 L 700 cans/h of pilsner 600 cans/h of wheat beer Can dimensions: 3.1 L – dia. 175 x 165 mm 5.0 L – dia. 175 x 246 mm Can suppliers: ARDAGH, & HUBER Disposable NOTE: Please note that some parts of the brewery are for sale, such as vertical and horizontal tanks, heat exchangers, weighing device, separator, pipe drag conveyor, compressors, flanges, div. stainless steel pipes, control valves, boilers etc. Further information can be  ...

Paint shop with UV dryer flow. Year of construction 007/00 Sale on behalf of customers, further data on request

KT7 CNC KTP 300-150 plasma cutting machine was built in 2016 in Poland. The machine, designed for machining workpieces with a maximum thickness of 32 mm, has a stable waterbed table that ensures clean cutting, material cooling and reduces gas emissions during machining. Workpieces produced in this way stand out for their excellent precision and do not require other secondary processes to be undertaken. In addition, the machine’s compact design and all its components have been hot-dip galvanised and powder-coated to prevent rust and guarantee trouble-free operation throughout its lifetime. The equipment includes among others CAM software and a powerful plasma source HYPERTHERM. The KTP 300-150 plasma cutting machine weighs 800 kg. Technical specifications of the KT7 CNC KTP 300-150 plasma cutting machine - maximum sheet metal thickness: 32 mm - maximum sheet metal weight: 2000 kg  ...

43 rolls of 3,048m each 19 rolls of 3,048m each, both chain types identical, only slight colour difference brown/light brown new, original box Price per m

Weibert FS32 Spiral Dressing thickness planer FS32 Dressing Thickness Planer with Spiral Knife Shaft Weibert FS32 Planing width: 320mm Spiral knife shaft Motor power: 4KW n=4500rpm, 400V Passage height: 4-225mm Professional stop Digital height adjustment WJ-300100 Special price: OPTIONS AT EXTRA COST: Slotted Hole Drilling Device Wescott Drill Chuck 0-16mm Driving equipment Dressing table extension adjustable 750mm

9 rolls of 3,048m each Price per m new, partly original packaging