pl used for sale

Belt rounder for rye bread. Used in good working condition

Belt moulder for rye bread used good working condition

WARCOM plasma - Cutting measures 2500x6000 - Equipped with protections - Suction system

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: MW Markisches Werk, hydraulic unit with container -Type: 1324 -Shaft: 12 x 8 mm, see photo techn. drawing -Individual components: see photos -Dimensions: 280/270/H450 mm -Total weight: 9.8 kg

Clamping plate, plate field, grooved plate -Clamping plate: grooved plate -Length: 310mm -Width: 310mm -Plate height: 65 mm -Weight: 44 kg

Mounting plate, plate field, aluminum plate -Mounting plate: made of aluminum, with threaded holes -Sheet thickness: 25 mm -Threaded holes: M12, spacing 100 mm -Dimensions: see photo technical drawing -Overall dimensions: 1290/800/H120 mm -Weight: 65 kg

Qty. 1 Second-hand paper production plant Mfc.: Voith Built: 1982 Modernised: 2001, 2006, 2012 Stopped: 2019 Paper program: GW/Pulp/DIP Width: 5.88 m Weight: 26 – 70 gsm Coating program: Width: 5.78 m Weight: 26 – 70 gsm - 2 x 18 gsm Scope of supply: Fourdrinier paper machine Stock preparation system Vacuum system Heat recovery Bleaching line Coating machine Prewinders Winders Overhead cranes

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 560 mm -Photo: Short cone 11 -Bolt circle: Ø 235 mm -Through hole: Ø 140 mm -T-slot: Slot width 22 mm -Weight: 109 kg

Mounting plate, mounting module -Manufacturer: murrelektronik, 2 pieces MP 6 mounting plate with 2 resistors -Art.No: 62001 -Price/tax: complete -Dimensions: 65/45/H35 mm -Weight: 0.1 kg/pc.

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate -Magnetic plate: clamping surface 800 x 250 mm -Voltage: 110V 1.7A -Transport box: included -Quantity: 1 piece available -Dimensions box: 1160/480/H250 mm -Weight: 112kg

TECHNICAL SPECIFICATIONS Manufacturer: MicroStep Europe Designation: Plasma cutting machine CNC Type: SPL-P 9001.20+S500 Year of construction: 2008 Design: with KJELLBERG plasma source HiFocus 280i Composed of: - MicroStep CNC guide machine SPL-P 9001.20+S500 - CNC machine control MSNC-500 for WindowsXP - CNC flame cutting table with sectional extraction / 9000x2000 mm - Slag trays for the integrated shaft - Kjellberg plasma source HiFocus 280i, with autom. Gas console - CNC interface for HiFocus 280i

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 445 mm -Through hole: Ø 77 mm with thread pitch 4 mm, see photo -Weight: 34 kg

Flame cutting machine, plasma torch -Designation: Plasma Electrode Hypertherm 043 020415 -Diameter: 13mm -Length: 41mm -Number: 1 piece available -Total weight: 0.05kg

High-speed high-temperature system with adjustable heat holder The machine can be started in a closed system or via supply tanks with pump control. Control via Siemens S7

MONOBLOC Delta 816S & Minerva 200 WireHooding EXTREMELY LOW MACHINE HOURS

ECKERT JANTAR 2 plasma-gas cutting machine manufactured in 2013 in Poland, is designed for cutting sheets made of e.g. black steel and stainless steel. The machine’s high-quality steel portal has been extended by an additional 700 mm to facilitate the loading and unloading of larger sized workpieces. A sectional extraction table with a length of 6000 mm and a width of 3000 mm effectively eliminates contamination generated during the cutting process, ensuring a high level of safety and great user comfort. Outside the working area of the JANTAR 2 plasma cutting machine, there is a system for cutting pipes and profiles with a special gear and rotating head, giving the possibility of precise cutting of pipes up to 300 mm in diameter by plasma or gas. The machine is also equipped with, among others, an ECS 872 CNC control, a WALTER SKTG 5.5/15 SM screw compressor, a KJELLBERG HiFocus 161 ...

Flame cutting machine, plasma torch -Designation: Plasma Electrode Hypertherm 043 020415 -Diameter: 13mm -Length: 41mm -Number: 1 piece available -Total weight: 0.05kg

approx. 24 pieces frame SSI Schaefer R3000, depth 30cm - used - : Price per piece: only 30.- € (net), packed and loaded from location! Manufacturer: SSI Schaefer Type: R3000 Year of construction: unknown Frame height: approx. 2.28m Frame depth: 30cm Condition: good Available: as of now Location. Frankenberg / Saxony

We constantly overhaul Martin T90, T90 profile and Martin T92 If you have any questions, please call us or email us. We speak Dutch, German, English and French. Brand: MARTIN Type: T90 Year of construction: 1991 M-No.: V188134 Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 12 - 260 mm Planer thickness: 8 - 160 mm Roll forming depth: Vertical spindle max. 12 mm Horizontal spindle max. 8.5 mm Thickness adjustment: NC and electrical adjustment Width adjustment: NC and electrical adjustment (optional: automatic pendulum axle control) Head measurement: 100 programs memory Spindles: Bottom: Tersa Z-4, ø125 mm, 5.5 KW Right & Left: Tersa Z-4, ø125 mm, 7.5 KW Top: Tersa Z-4 ø125 mm, 5.5 KW Speed: 6,000 rpm Feed: 4 – 25 m/min infinitely variable Min. product length: 380 mm Central control ...

Brand: KAMRO Type: DAK510 Year of construction: 1978 Planer width dresser/thickness planer: 530 Knife shaft: ø120mm, Z-4 tersa or X-Plane Speed: 5,000 rpm Motor: 4 KW Feed rolls: imports Toothed steel, Export rolls: rubber Planing height: 3 - 250 mm Table length dresser: 2,300 mm Table length thickness table: 920mm Chip removal: 8mm Feed: 6/12 m/min weight: 1050 KG Options: X-Plan Wave SuvaMatic Motor: 5.5 KW or 7.5 KW Open table electrically Feed frequency control

Flame cutting machine, plasma torch - Designation: plasma electrode Hypertherm 402 120667 -Max. Load: 200 A -Diameter: 13mm -Length: 41mm -Number: 9 pieces available -Price: complete -Total weight: 0.45kg

Flame cutting machine, plasma torch - Designation: plasma electrode Hypertherm 402 120667 -Max. Load: 200 A -Diameter: 13mm -Length: 41mm -Number: 9 pieces available -Price: complete -Total weight: 0.45kg

Length: 5000 mm Width: 2000 mm Height: 400 mm

Brand: Martin Type: T54 Year of construction: New Motor power: 5.5 kW Knife shaft speed: 5,000 tpm Knife shaft: Z-4 Tersa, ø125 mm Planer width: 5000 mm Spahn removal: max.8 mm Table length: 2.850 mm Task - Table length: 1.640 mm Removal - table length: 1.200 mm Table height: 855 mm Dressing stop: Aigner stop, 45°Movable with dunn material planing strip weight: 1.200 KG

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 120182 plasma nozzle -for: Hypertherm HT2000 -Number: 2 available -Price: complete -Total weight: 0.2kg

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 020608 plasma nozzle -for: Hypertherm HT2000 -Number: 1 piece available -Total weight: 0.1kg

REGO-Schläger. Nach einer Generalsanierung - voll funktionsfähig. Wir können den Film in privaten Nachrichten verschicken. Bitte kontaktieren Sie mich, wenn Sie interessiert sind.

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: diffuser Hypertherm 020607 -for: Hypertherm HT2000 -Number: 2 available -Price: complete -Total weight: 0.1kg

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 020448 plasma nozzle -for: Hypertherm HT2000 -Number: 4 available -Price: complete -Total weight: 0.2kg

Plasma Cutting/Oxyfuel ESAB Numorex for sale Technical data: - Plasma source: 240/360 A - Bevel plasma torch for chamfer cutting - Vibrating suction bench for evacuating pieces - Smoke extraction system.

CATALOG NO. 6904 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 6 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 130mm 3) vertical left 130mm (2nd and 3rd spindle) 7.5kW 4) horizontal top 230mm 5.5kW 5) horizontal bottom 230mm 5.5kW 6) universal 230mm, 360° adjustable 5.5kW - all spindles adjustable up / down, right / left - spindle 1,2,3,4,5 equipped with an electric brake - spindle diameter 40mm - 5 introductory, toothed, pulling rollers from above - from above, 4 rollers, pulling, rubber, smooth, including 2 double - from the bottom, a rubber roller, pulling - feed on cardan shafts - rollers pressed pneumatically - smooth adjustment of the feed speed - feed motor 4kW - working pressure 6-10 bar - electric setting of planing thickness - motor lifting the body of about 0.55 kW - central lubrication of the co ...

Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with support ribs -Length: 1000 mm -Width: 1000 mm -Sheet thickness: 30 mm -Dimensions: 1000/1000/H260 mm -Weight: 402 kg

Gebr. Kemper bread plant, overhauled, with round and long knitting Kemper Superba SU-BR-2500G, 270 cm long round beam, with Kemper BE-13 bucket elevator

Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH211 SN 6.2 -Dimensions: see photos -Total dimensions: Ø 230 x 190 mm -Weight: 30 kg

Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO A16B -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO AS -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

Strapping machine, packaging machine, strapping machine, carton stapler, stapling pliers, pliers stapler -Tensioning pliers: sealing device for strapping -for staples: approx. 16 mm width -Dimensions: 450/100/H110 -Total weight: 2.9 kg

Strapping machine, packaging machine, strapping machine, carton stapler, stapling pliers, pliers stapler, tensioning and sealing device -Tensioning pliers: sealing device for strapping -Band width: approx. 16 mm -Staples: approx. 19 mm wide, see photo -Dimensions: 480/100/H170 mm -Total weight: 3.6 kg

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, screw jack -Height adjustable: 320-390mm -Number: 24x Fixators available -Price: piece -Dimensions: Ø 360/H370 mm -Weight: 41kg/pcs

clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Surface: with grooves, without T-slots -Length: 3000 mm -Width: 2500 mm -Height: 300 mm -Transport dimensions: 3000/2500/H300 mm -Weight: 5220 kg

Description Plate die-cutter suitable for MAN Roland 300-500-700-900 with autoplate system APL and Graphometronic Film register for plates from CtP systems but also for presses from Heidelberg 52, 74, 102 and XL series and KBA Rapida presses 74, 75, 105, 130, perforations 780 and 425 mm can be switched off each

2 LITRE PET LINE at 10,500 BPH KRONES BLOC WITH IPANEL (Yr 2010) - 70 FILLING HEADS- 12,500 BPH MAX SPEED SIDEL SBO8 BLOW MOULDING AIRVEYOR COOLING CONVEYOR KRONES AIRCO INFEED CONVEYOR KRONES CARBONATOR (2010) HEUFT INSPECTION (2012) KRONES CONTIROLL LABELLER (2012) SMI DIVIPACK & SMI OVERWRAPPER KHS HANDLE ATTACHMENT LOGOPACK PACK LABELLING ACMI PACK SORTING & ROBOT PALLETISING FANUS PACK HANDLING ROBOT TOSA PALLET WRAPPER LOCATION: UK The line is installed in the factory and inspections are most welcome. The machinery is in good working condition and ready for engineering removal. We can provide the full installation service if required. Please contact Indassol today for a quote!

Calamit Magnet Weight: approx. 65 kg Dimensions : 300 x 200 x 165 mm Shipping is of course possible. Shipping is subject to freight and packaging costs, depending on size and weight. (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

5 LITRE PET LINE - 2,000 BPH Sidel ‘SB02F’ Rotary Blow Moulder, M08 neck finish, Sidel Preform Hopper and Feeder Elevator with Sidel Preform Unscrambler Air Conveyor System with swan neck elevator and lowerator AVE 15 Valve Filler and 4 Head Capper with cap hopper and elevator (2004) Comag ‘PLH2500’ Neck Handle Applicator (2008) Harlands 155WS RC Inline Labeller (2010) Smipack ‘BP700AR’ Shrink Wrapper (2006) Smipack ‘T650’ Conveyorised Heat Tunnel (2007) Logopack ‘410IIIF’ Pack Labeller (2015) Lita ‘Eco’ Palletising System comprising of infeed metal roller conveyor, Lita pack stacker with carboard tray insertion, pallet infeed and outfeed system TOSA ‘85’ Rotary Pallet Wrapper, Type AV5866 and outfeed station Location: UK This 5 Litre PET line is in good working order, and inspection in the factory is most welcome.  ...

WEINIG four-sided planing machine, PM 17, 5 spindles Machine No. 1329-2356 Year of manufacture: 1982 Working width 170 mm Planning height 120 mm 5 spindles: max. tool length 180 mm, 130 mm Feed table length 2000 mm with planing heads 6 spindles arrangement: 1. Bottom 4 kW 2. Right 3 kW 3. left 5.5 kW 4. Top 5.5kW 5. Bottom 4kW / universal Spindle diameter approx. 35 mm Feed speed 6.5 - 49 m/min. manual lubricant pump Incl. 5 tools for all heads Dimension 4500 mm x 1300 mm x H 1500 mm Weight approx. 3800 kg Technical data subject to correction

Used aseptic filler made by FBR ELPO, new 1997. Machine comes with steriliser made by CFT Rossi Catelli, new 2000.

dreizler® dual-fuel burner in DUObloc version Operation infinitely variable modulating (gas and oil) CE certified and compliant with EN 676 gas burner with blower and EN 267 oil burner and the EU directives EU/2016/426 Gas Appliance Regulation and 2006/42/EC Machinery Directive Dual-fuel burner according to EN 676: • DUObloc version: fan separately on base frame with vibration damper, electric motor and fan wheel in sheet steel housing, with protective grille and compensator on the discharge port • Burner housing with gas/oil/air mixing device for the combustion of natural gas and liquefied petroleum gas and EL fuel oil, other liquid or gaseous fuels on request • Two-pole ignition transformer device for direct ignition of gas and oil flame • Flame monitoring via optical flame detector • Gas deficiency protection and air deficiency protection on the burner � ...

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Manufacturer: Rübenach, clamping plate: with support ribs on a solid base -Length: 2500mm -Width: 1500mm -Height: 835mm -Dimension: 2500/1500/H835 mm -Weight: 2440 kg

table length: 1000 mm table width: 800 mm table height: 200 mm work height max.: 1100 mm material: Stahlguss total power requirement: kW weight of the machine ca.: 250 Kg dimensions of the machine ca.: 1,0 x 0, 8 x 1,1 m Measuring plate on 3 adjustable feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ECKERT JANTAR 2 plasma cutting machine was manufactured in 2008 in Poland. The machine equipped with a large working table of 12500 x 2500 mm (length x width) is designed for cutting oversized metal sheets made of carbon and low-alloy steel of maximum thickness of 25 mm (plasma cutting) or 110 mm (oxygen cutting). The torches are powered by a highly efficient HYPERTHERM HPR260 plasma source with a power of 260 A, guaranteeing excellent precision and many years of trouble-free operation. The ECKERT JANTAR 2 12.5×2.5 m plasma-gas cutting machine ensures a high level of safety. A KEMPER filtration system with self-cleaning filters and an extraction table eliminate contamination generated during workpiece machining. The plasma cutting machine is numerically controlled by an ECS 859 controller with all the necessary functions for efficient use of the machine. Technical parameters of th ...