127,261 used machines on RESALE, but how to find them? Machine Search
T-slot plate, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 1500/3510/H950 mm -Plate thickness: 20 mm -Plate is: with supporting ribs -1x T slot: 18 mm -with: detachable stop -Weight: 2600 kg
T-slot plate, measuring plate, measuring table, clamping plate with T slots, plate field, welding table, welding table -Dimensions: 620/1560/H260 mm -Plate thickness: 20 mm -Plate is: with supporting ribs -1x T-slot: 15 mm -Weight: 360 kg
Pressure plate stacker Grafoteam PST 26; good condition; cleaned and tested; new engine; .max. Panel size 820x780mm, min.324x394mm. Plate stacker Grafoteam PST 26; good condition; cleaned and checked; New Arm Motor; Max.plate size 820x780mm, min.324x394mm.
T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 250/1450/H170 mm -Sheet thickness: 28 mm -Plate is: with supporting ribs -1x T-slot: 12 mm -1x: Longitudinal groove -Weight: 156 kg
Clamping plate with T-slots Plate field Welding table Welding table Plate boring machine -Width: 795 mm -Length: 2800 mm -Height: mm -Plate thickness: 35 mm -Working height: 960 mm -Plate with: support ribs -Groove width: 22 mm -Dimensions: 860/2870/H960 mm -Weight: 1470 kg
Planer Planer COMEVA MB 500 Working width 510mm 4-knife shaft Traditional knives Worktop length 2630mm Sampler tilted at an angle of 45° Engine power 4kw Uttering combs CE Certificate
PLC control, digital output -Manufacturer: KUHNKE -Type: 653.000.43 -Quantity: 1x power supply unit included -Dimensions: 260/135/H235 mm -Weight: 3.2 kg
Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 9090 mm -Table height: 206 mm -Working height: 350 mm -Transport dimensions: 9090/490/H350 mm -Weight: 2300 kg
working width 410 mm chip removal 5 mm SPIRAL PLANER SHAFT XYLENT ELECTRIC SLIDING TABLE LIFT DIGITAL DISPLAY FOR THICK TABLE POSITION Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h
Tetra Pak A1 Wedge 200ml Filling Line For Sale Item #: Usm-171 Category Tetra Pak A1 Tetra Pak A1 1000 for Tetra Wedge 200ml Filling Line Nominal line capacity (per hour) 11300 packages/h Package type Tetra Wedge Aseptic Package volume 200 ml Opening/Closure Straw Tetra Pak Straw Applicator 30 0400 TWA 1 Cooling system: Cooling system Photocell unit: Photocell unit Dating unit: With dating unit InkJet Paper trolley: With paper trolley Remote connection: With Remote connection Manual. Oil Pump f. Refill. Cabinet Jumbo Reel Truck 080S 0403; Battery operated stacker with traddle outriggers and electrical powered turning Online PLMS Stabilizer 35kVA
Tetra Pak TBA 19 125ml Filling Line For Sale Item #: Usm-172 Category Tetra Pak TBA 19 We are selling One Tetra Pak TBA 19 125ml Slim Complete filling line. 1-TBA 19 125ml Slim Filling machine, year of Manufactring 2003, version 10v, working hours 16900 2-Tetra Straw Applicator, model TSA 21, Year of Manufactring 2004 and version 200v 3-Tetra Cardboard packer, TCBP 70, year of Manufactring 2003, version 80v 4-Tetra Pak Shrink, TTS 51, year of manufacturing 2001 5-Conveyors and Paper Trolly
Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 610 mm -Length: 2900 mm -Height: 55 mm -Working height: 185 mm -Plate: with support ribs -Groove width: 18 mm -Dimensions: 2900/610/H185 mm -Weight: 874 kg
Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 494 mm -Length of the clamping surface: 2925 mm -Height of table surface: 447 mm -Working height: 447 mm -Transport dimensions: 2925/494/H447 mm -Weight: 564 kg
PreviousNext Tetra Pak TBA 9 125ml Filling Machines for sale Item #: Usm-174 Category Tetra Pak TBA 9 Two Tetra Pak TBA 9 125ml Filling Machines, Year of Manufacturing 1994 and version is 130v and 140v, Two Helix -Accumulators and Paper Trolly
Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 7550 mm -Height of table top: 196 mm -Working height: 196 mm -Transport dimensions: 7550/490/H196 mm -Weight: 1726 kg
WEINIG moulder model UNIMAT 17A with 8 shafts: -useful working measures 170x120mm -gimbal towing and pneumatic pressure -variable feed speed from 6.3 to 36.5 mt/min -Double wheel of upper feed before the 1st shaft -tandem feed groups in front of the 2nd and 4th shaft -fluted plane from 1st to 6th shaft -2000mm long entrance plane -manual lubrication pump of the table Tree layout: 1-under 2-right 3-left 4-right 5-above 6-under 7-above (free space below) 8-Universal
Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the clamping surface: 2525 mm -Height of table surface: 268 mm -Working height: 268 mm -Transport dimensions: 2525/500/H268 mm -Weight: 570 kg
Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 1320 mm -Length: 3530 mm -Height: 830 mm -Plate thickness: 75 mm -Plate: with support ribs -Groove width: 23 mm -Weight: approx. 3500 kg
Stock No. 2587 1 used pelletizing plant, functionally tested, Throughput up to approx. 600 kg/h depending on the material, consisting of: 1 volumetric dosage Extruder Plastmachines Type PME 100 Single screw Ø 100 mm – 35 L/D Drive 134 kW – DC 1x degassing zone Melt filter BKG type K-SWE 121 RS – backwasher incl. Hydraulics 3 kW Strand head with holes 20 x Ø 3.5 mm Continuous cooling pool 400 x 4000 mm with strand guide rollers Strand extraction Strand pelletizer SG 300 ResoTec control / control cabinet Viewing by arrangement - at short notice More pelletizing lines / extruders available from our Wuppertal plant & ready for demonstration
T-slot plate, clamping plate with T-slots, plate field, welding table, welding table, intermediate plate for hydraulic press, eccentric press, milling machine -Dimensions: 930/700/H90 mm -Plate: massive -Bore in the middle: Ø 100 mm -Weight: 450 kg
Bear AR60 Planetary mixer 60Kg planetary mixer, variable speed, comes complete with one bowl, beater and whisk attachment and a bowl trolley, 3Ph, number 3 on back of mixer
P332 - used approx. 81.6 m³ / 81,600 ltr PE100 tank, plastic tank, flat bottom tank, single-walled. technical details: capacity: approx. 81.6 m³ / 81,600 litres material: PE100 tank, plastic tank manufacturer: Weber Kunststofftechnik year of construction: 2016 dimensions: approx. Ø 4.00 m × approx. H 7.00 m specific weight: at least 1.0 kg/ltr Used PE100 tank, professionally cleaned and in great condition, almost as new, some are completely unused. Single-walled, above-ground storage tank, standing on flat floor. Lid on top of the roof and on the tank wall, several inlets and outlets, impervious to light. Former water tank, suitable for many different media. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been ...
PLC control, electronic module -Type: MSS G-0 -Number: 3x available -Price: per piece -Weight 2.3 kg/piece
PLC control -Type: Simatic S7 6ES7 132-4BD02-0AA0 -Quantity: 5 available -Price: per package -Weight: 0.2 kg
PLC control -Type: Simatic S7 6ES7 138-4FB03-0AB0 -Number: 28 available -Price: per package -Weight: 0.3 kg
PLC control, Interbus-S -Type: S5 6ES5 491-0LB11 -Type: SINEC 6GK1143-0TA00 -Quantity: 2 available -Price: per package -Weight: 15 kg
Hydraulic power pack, hydraulic pump, hydraulic pump -Hydraulic unit comes from a Jungheinrich electric forklift -2x drives -Filter Control valve -Hydraulic tank: 930/400 / H360 mm -Dimensions: 1000/400 / H800 mm -Weight: 288 kg
Stock No.: 2107 1 used, partially overhauled and function-tested strand granulator with >> Granules Cutting Lengths Adjustment ( SV ) Manufacturer COMAC - Italy Type SG-100 SV Strand inlet width 100 mm cutting rotor width 110 mm, Parallel section rotor with 32 teeth Rotor Ø 200 mm >> strand pellet cutting length adjustment 2 drives: 1x for cutting rotor - 4 kW 1x for feed roller 1.5 kW with STOBER reduction gear Soundproof housing of the pelletizing chamber Visit / test run possible shortly by appointment. We also have matching strand cooling basins, strand blowers and classifying screens available from stock. Further strand granulators and other pelletizing systems/plants available from stock ( water ring - , hot impact and underwater pelletizing )
plug distributor, distribution terminal block, distribution terminal, power distribution block -Number: 21x available -Price: per piece -Dimensions: 130/45/H50 mm -Weight: 0.2 kg
Sell Vacuum pump used Type: Busch 250-138, Vacuum: 20 mbar, Motor Oil: Type SAE30, Engine: Delfin, Year of manuf.: 2012, Power 3,45 kW, 230 volts, 15 A,
T-slot plate, clamping plate with T slots, plate field, welding table, welding table -Intermediate plate for: hydraulic press, eccentric press, milling machine -Dimensions: 1100/650/H100 mm -Plate: solid -Bore: 8x -T-slot: 28 mm -Weight: 536 kg
plastic shaft, plastic material, plastic shaft, plastic shaft material, polyamide -Solid material -Diameter: 335mm -Length: 1055mm -Weight: approx. 110 kg/piece -Quantity: 9 pieces available -Price per piece -Total weight: 1120 kg
Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 195 mm -with: T slot 10 mm -Thread intake pitch: 3 mm -Weight: 5.7 kg
Clamping plate with T slots, plate field, welding table, welding table -Clamping surface width: 250 mm -Clamping surface length: 250 mm -Height: 40 mm -Plate thickness: 60 mm -Hole spacing: 290 mm -Groove width: mm -Dimensions: 330/260/H40 mm -Weight: 11.6 kg
Pressure plate stacker Grafoteam PST 26 C 580; condition outdated; .max. Panel size 580x820mm, min.240x240mm; Speed adjustable; Height adjustable. Plate stacker Grafoteam PST 26 C 580; codition rebuilt; max.plate size 580x820mm, min.240x240mm; adjustable in speed; adjustable in hight.
Four-side planer with 4 planing heads •Powerful with 4 motors Hsvwvkytm Voltage 400 V / 3 / 50 Hz Motor power 17,1 kW finished workpiece width 180 mm min. finished workpiece width 25 mm finished workpiece thickness 105 mm min. finished workpiece thickness 10 mm min. length of the workpiece - for single feed 350 mm - at group feed 250 mm Number of working spindles 4 Spindle speed 6000 min-1 Spindle diameter 40 mm Cutterhead diameter 120 mm Length of horizontal spindles 190 mm Length of vertical spindles 120 mm Feed speed 6; 12 m/min Diameter of feed rollers 120 mm Length of feed table 1700 mm Distance of the feed table from the floor 920 mm Quick adjustment of the feed table and ruler 10 mm Weight 1000 kg
2 x KRONES SPIRIT / WHISKEY FILLING LINES LINE 6: CAPACITY: 6,600 BPH ON 1.75 LTR BOTTLES Line Suitable for: 50cl, 70cl, 75cl, 1ltr, 1.5ltr, 1.75ltr LINE 7: CAPACITY: 12,600 BPH ON 70CL BOTTLES Line Suitable for: 50cl, 70cl, 75cl, 1ltr Location: Glasgow, UK.
Package strapping machine with frame size 1600 x 400 mm, width 12 mm. Very little used, because bad buy. Location Netherlands, Sold on order.
Plug, plug connection -Plug pre-assembled with cable -Type: 17113 -Number: 1,100x plugs available -Price: per piece -Please inquire about quantity discounts -Weight: 0.2 kg
Centrifuge New brand: GESTER, model: CG-1200V. Shaft length: 1.2 m and axis diameter: 0.5 cm. Engine: 50 hp at 3000 rpm. Pneumatic piston for cleaning on top. Electrical panel with triangle star.
Key data: 90
Granceado line (Pelletized) extruder 1 spindle: 90 mm Ø, 35 L/D, brand: Eurotecno. Hydraulic filter changer: 160 Ø, pellet head, bathtub, noodle and electrical panel with motor: 106 Kw, dc and variable speed drive.
Telescopic spring spindle guard CNC PLC -Type: TF 050-2100-120 V/H -Length: 2100 mm -Diameter: Ø 120 mm -Weight: 4.5 kg
Flame cutting pliers, electrode pliers, hose assembly -Length: 3 m Price: per piece -Quantity: 5 available -Weight: 3.5 kg/piece
Plate intermediate table MDT 480 C-800; condition outdated; new engines; new tapes; .max. Printing plate size 811x1200mm; Inlet and outlet sensor; height adjustable. Plate conveyor Grafoteam MDT 480 C-800; condition rebuilt; new motor; new belts; max.plate size 811x1200mm; in and outfeed sensor; adjustable in hight.
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 450 mm -Conical mount: Ø 110 mm -Groove: 16 mm -Weight: 66 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate -Manufacturer: Röhm, three-jaw chuck with clamping plate -Mouth size: Ø 250 mm -Passage: Ø 76 mm -Mounting plate: 500 x 310 mm -Overall dimensions: 500/310/H300 mm -Weight: 72 kg
Mounting plate, scribing plate, measuring plate, measuring table, welding table, welding table, straightening plate, scribing plate -Mounting plate: Straightening plate with base frame -Length: 600 mm -Width: 600 mm -Table thickness: 65 mm -Overall dimensions: 600/600/H815 mm -Weight: 181 kg
maximum number of results exceeded
please refine your search
