pl used for sale

Bezel, setting stick, lynette -Intermediate plate for: bezel -Prism size: 33/38 mm -Height: 71 mm -Drawings: with the photos -Dimensions: 345/175/H71 mm -Weight: 32 kg

Washing screw stainless steel, sieve basket wash screw used, Manufacturer: unknown Diameter approx. 550 mm, Drive 1.1 kW Total dimensions approx. 6.5 x 1.3 x 1.7 m. The plant comes from a plant where canned food was produced. Changes and errors in the technical data and information excepted.

The original part is a main and KO extruder from Kuhne built in 2006, the system was extended in 2010 by an additional extruder from the SML (coating unit). Plant description: COEX cast film line with additional coating unit. The main plant is equipped with a co- and a main extruder. The coating unit with a main extruder. Processing of thermoplastics in a processing range of 90-300°C. The system can be operated with the following combinations: • Main unit (CoEx system) with coating unit • Main unit (CoEx system) without coating unit • Only coating unit with unwinding unit for carrier film For operation in the various combinations, the corresponding additional units are switched on or off. Possible layer structures: Main plant: - Monofilm with release film if required - 3-layer film (A-B-A) with release film if required Coating: - Monofilm on carrier material if req ...

Clamping plate, welding table, welding table, straightening plate -Steel table -Length: 2200 mm -Width: 1255 mm -Height: 705 mm -Panel thickness: 69 mm -Weight: 1396 kg

Cross support, cross support, cross table, cross sliding table, cover plate -Manufacturer: Kunzmann, 2 pcs. Cover plates from milling machine type UFV 600 -Price/Sale: complete -Dimensions each: 263/161/H38 mm -Weight: 9.7 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table, turning table -Clamping table made of: Wadkin router type LS 3687 -Table surface: 760 x 765 mm -Table thickness: 13 mm -Clamping table: swiveling -Dimensions: 760/765/H160 mm -Weight: 85 kg

I sell the four-side planer Futura P-MAX 23/5+UNIV, built in 2008. 6 Spindle: bottom - right - left - top - bottom - universal Electronic programming for working width, working height and feed speed. Element max. 230x170mm ! All 6 spindles 6000 rpm. Material prints for short elements. Weight 2500kg. 1-zone pneumatic material pressure system for feed Fully operational. Available the same. Exhibition machine, has worked very little !

PLC control, central assembly, work memory, CPU -1x: GES7 223-1BH00-OXAO EM223 -1x: GES7 222-1BF00-OXAO EM222 -Price: complete -Dimensions: 195/80/H65 mm -Weight: 0.4 kg

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/111 mm -Height: 24 mm -Hole circle: Ø 152/8 mm -Delivery of: steel/stainless steel cover plates possible -Weight: 0.5 kg/piece

Hand lever plate shears and profile steel shears Knife length 400mm Cuts sheets up to 5mm Cuts round steel up to 13mm Heavy and stable design with foldable storage table. Mounted on base More hand lever plate shears in stock, also for round steel and profiles!

The extrusion line is a COEX cast film line. Processing of thermoplastics in a processing range of 150-300°C. Possible layer structures: - Monofilms - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) Plant data: Total system output max. 2230 kg/h Extruder A: 90/33 L/D max. 330kg/h Extruder B.: 135/33 L/D max. 950kg/h Extruder C.: 135/33 L/D max. 950kg/h Film width NET: 1600 - 2110mm; Center cut for 2 bobsleighs possible (2x 800 – 2x 1055mm) Thickness: 25-580μm Production speed 10 - 150m/min Roll width 2500 mm roll weight 2000kg Additional components (quality): non-contact thickness gauge for automatic nozzle with automatic cross profile control on both sides Corona pretreatment (max. 12000W) Optical surface inspection system incl. defect marking in open and pass-through light Ancillary equipment: Dryer 1 – 4 with 4500 liters volume ; Heating capacity 48kw dryer 5 ...

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer diameter: 198 mm -Height: 20 mm -Hole circle: Ø 150/7 mm -Delivery of: steel/stainless steel cover plates possible -Weight: 0.6 kg

length: 9000 mm width: 6000 mm number: 6 T-slot - width: 35/62 mm T-slot - distance: 250 mm number of T-slots: 8 Plate thickness: 350 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The Palttenfeld consists of 9 plates, size per plate 3250x1500 mm, number of T-grooves per column 7, price 1000 €/m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3250 mm width: 3000 mm number: 2 T-slot - width: 35/56 mm T-slot - distance: 180 mm number of T-slots: 7 Plate thickness: 245 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The Palttenfeld consists of 9 plates, size per plate 3250x1500 mm, number of T-grooves per column 7, price 1000 €/m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 250/172 mm -Height: 20 mm -Pitch circle: Ø 202/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 73x pillows available -Price: per piece -Weight: 0.5 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outer/inner diameter: 198/110 mm -Height: 20 mm -Hole circle: Ø 150/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 148x pillows available -Price: per piece -Minimum warning: 3 pieces -Weight: 0.5 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outer diameter: 152 mm -Height: 20 mm -Hole circle: Ø 125/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 96x pillows available -Minimum order: 3 pieces -Price: per piece -Weight: 0.4 kg/piece

Faceplate, faceplate chuck, four-jaw chuck -Hole size: Ø 408 mm -Mounting thread: M95 x 6 mm -Weight: 52 kg

Tilting planks with trolley Stainless steel 17 tilting planks Dimensions: 80,5x60cm W/D The car has 18 editions Dimensions of the car: Height:177cm Width: 87cm Depth: 61cm

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 1200 mm -Width: 800 mm -Height: 170 mm -Plate thickness: 30 mm -with: support ribs -Weight: 328 kg

Kemper bucket elevator for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft doughs Space-saving design optionally 1 or 2 pieces of dough Run-off belt Dimensions: Height: 216cm Width: 71cm Depth: 120cm

Specifications: - Span width approx. 850 mm - Clamping surface height approx. 700 mm - Clamping block depth 300 mm - Total height with clamping base 750 mm - Clamping base dimensions 850 x 450 mm - Clamping holes M16 - Distance of the clamping holes 40 mm - Number of clamping holes per side 336 pcs - Total number of clamping holes 772 pcs - Internal dimensions of the clamping block 380 x 220 mm each - Wall thickness of the clamping areas approx. 40 mm - laterally screwed on 3 jaw lining 300 mm - side-screwed hydr. Machine vice RÖHM - Jaw width 200 mm - Weight approx. 700 kg

Kemper Long Knitter Type: Princes Year of construction 2007 Stainless steel version for long work of the breads with 2 attachments Band width: 32cm comfortable with bread systems on rolls Height: 155cm Width: 200cm Depth: 60cm

Butter press machine  made of stainless steel with discharge funnel on rolls Height: 200cm Width: 150cm Depth: 88cm

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, screw jack -Height adjustable: 590 - 645 mm -Number: 3x feet available -Price: complete -Dimensions: Ø 410/H600 mm -Weight: 93 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 250/160 mm -Height: 20 mm -Hole circle: Ø 204/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 42x pillows available -Price: per piece -Weight: 0.7 kg/piece

Filler block, Fabr. Nagema, Type: Varifill 40/10K/10PP Capacity: 12,000 Fl/h, run on 0.33 lt longneck and 0.5 lt NRW bottles 40 filling valves 10-digit crown cork 10-digit screw capper (for MCA 28 closures), double pre-evacuation, Running direction: left -> right YOC 1994 L: 4,000 mm, W: 2,700 mm, H: 2,800 mm Price on request

Bread long-knitter for bakery Manufacturer Unknown Height: 180cm Width: 210cm Depth: 130cm

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outer diameter: 90 mm -Height: 20 mm -Delivery of: steel/stainless steel cover plates possible -Number: 38x pillows available -Price: per piece -Minimum order quantity: 5 pcs -Weight: 0.1 kg/piece

2 cyclones as good as new Type AKA VORTEX Twin TRT 4118 Throughput per twin 95m3/h total 190m3/h Diameter 200mm, cutting cut approx. 50my 1 pcs new cyclone Type AKA Vortex KRS3128 II 40m3/h DM 150 mm All cyclones including overflow line and shut-off valve If required, a refurbished PUMP METSO VASA is also available Drive 30 kW available are also handed in individually

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outer diameter: 103 mm -Height: 20 mm -Hole circle: Ø 76/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 8x pillows available -Price: per piece -Minimum purchase: complete -Weight: 0.1 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 125/79 mm -Height: 50 mm -Delivery of: steel/stainless steel cover plates possible -Number: 2x pillows available -Price: per piece -Minimum purchase: complete -Weight: 0.2 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outside/inside: Ø 102/42 mm -Height: 20 mm -Hole circle: Ø 75/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 4x pillows available -Price: per piece -Minimum purchase: complete -Weight: 0.1 kg/piece

Rademaker Bestreungslinie Stainless steel cladding Stainless steel band analog control can be controlled together or individually 269 operating hours Dimensions individually: 1st table: 92x110x120cm W/D/H 2nd table: 92x107x110cm W/D/H

Grease baking device Habersang Stainless steel analog control up to 110°C with outlet valve incl. accessories Net price plus VAT ex warehouse

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outer/inner diameter: 142/103 mm -Height: 53 mm -Delivery of: steel/stainless steel cover plates possible -Number: 46x pillows available -Price: per piece -Minimum order quantity: 5 pcs -Weight: 0.3 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outer/inner diameter: 129/82 mm -Height: 53 mm -Delivery of: steel/stainless steel cover plates possible -Number: 59x pillows available -Price: per piece -Minimum order quantity: 5 pcs -Weight: 0.3 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outer/inner diameter: 155/115 mm -Height: 53 mm -Delivery of: steel/stainless steel cover plates possible -Number: 29x pillows available -Price: per piece -Minimum order quantity: 5 pcs -Weight: 0.3 kg/piece

Specifications: - Clamping surface approx. L 900 x D 600 mm - Table height 480 mm - Circulating water channel - 3 pieces T – grooves M 16 L 900 mm - side flange plate - Space requirement L 1000 x D 760 x H 480 mm - Weight approx. 300 kg

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outside/Inside: Ø 103/38 mm -Height: 20 mm -Hole circle: Ø 76/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 2x pillows available -Price: per piece -Minimum purchase: complete -Weight: 0.2 kg/piece

Kemper bucket elevator for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft doughs Space-saving design optionally 1 or 2 pieces of dough Transverse belt left-hand / Cross-band right-hand with scales

Allscales platform scales Model: ISC-V stainless platform scale, platform 500mm x 500mm, 400g - 60Kgs, e = 20g, 1Ph

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer diameter: 168 mm -Height: 20 mm -Delivery of: steel/stainless steel cover plates possible -Number: 2x pillows available -Price: per piece -Minimum purchase: complete -Weight: 0.5 kg/piece

Pipe sealing cushion, leak sealing cushion, sealing plate, pipe sealing, penetration sealing -Pipe sealing cushions -Outer diameter: 325 mm -Height: 21 mm -Supply of: steel/stainless steel cover plates possible -Number: 2 pillows available -Price/Sale: complete -Total weight: 3.6 kg

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 458/273 mm -Height: 21 mm -Delivery of: steel/stainless steel cover plates possible -Weight: 3 kg

Extraction unit for filler station or preparation station: Make : Wolf Year of construction : 2009 Dimensions : 1.5 m x 1.5 m x 1.5 m (approx. WxLxH) Volume flow : 19,000 or 9,500 m3/h, 1895 or 948 1/min; 7.5 or 2.0 kW Pipelines : optional exhaust air pipes and deflector hood. Electrics : Control cabinet Location : Warehouse Area Nuremberg Retail price : € 3.350,- net ex location

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 347/274 mm -Height: 20 mm -Hole circle: Ø 311/10 mm -Delivery of: steel/stainless steel cover plates possible -Number: 21x pillows available -Price: per piece -Weight: 0.9 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 197/124 mm -Height: 20 mm -Hole circle: Ø 164/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 122x pillows available -Price: per piece -Weight: 0.5 kg/piece