pl used for sale

Thread rolling machine ORT RP18 PLC 2 roll 18 tons ejector, SOLD - more available in stock, VENDUTA - altre disponibili in stock, Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior, Power (Ton): 18, Number of rollers: 2, PLC: Siemens

pressure: 1645 t stroke: 1000 mm dayligth: 3000 mm Control: down speed: 280 mm/sec return speed: 275/346 mm/sec distance between columns: 2520 mm total power requirement: kW weight of the machine ca.: t the machine is in very good condition optional you can buy a shifting table as well The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2000 mm plate depth: 3000 mm plate height: 350 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: . mm height: . mm volt: U2 104 V ampere: I2 60 A volt: U1 400 V volt: U0 320 V ampere: I1 18-26 A Manufacturer number.32310819 EC/EN 60974-1 See type plate The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 500 machines in stockMore than 8,500 m² of storage space, crane capacity 70 tMore than 10,000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ESC-HIGH PRESS ´PLUS´ E3 Model 0 max. print size: 510 x 720 mm max. sheet size: 520 x 720 mm min. sheet size: 270 x 350 mm gripper margin: 10 mm Additional equipment: - RKS squeegee system - Antistatic device with control unit AFC-2 and SCPB electrodes 530 with cable length 180 cm including connector HV-4 - integrated cleaning station system TEKNEK in the machine inlet - equipped with ESC leading edge feeder A dryer can also be added /listings/3715380-used-wicket-long-term-dryer Find more here - /

Laser cutting machine Type: Platino Fiber Manufacturer: Prima Power Year: 2018 Hours machine on: 15000 Hours laser on: 8200 Laser: 4000 W Machine in good condition, under power Find more here - / Contact us at -

Surface Grinding Machine FAVRETTO MC130, 1300x700 mm, magnetic plate, sistem Digit Plus FAVRETTO, Information about technical data are not binding., Machine available subject to prior sale., Max working dimensions: 1500x750 mm, Working table size: 1300x500 mm, Longitudinal travel x axis: 1640mm, Cross travel y axis: 650 mm, Clearance between worktable and spindle axis: 850 mm, Feed rate x axis: 1 - 40 m/1, Feed rate y axes: 0 - 2000 m m/1, Wheel speed: Stepless by Variable speed drive AC, Wheel dimension: 400x152,4x100 mm, Spindle motor power: 15Kw, Nc: Digit FAVRETTO, Weight: 8.000 Kg, Accessories: Electro permanent magnetic plate 1300x500 mm, coolant tank with paper filter

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 25.000, -Usable volume approx. 22,500 liters - Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 44.000, -Usable volume approx. 36,000 litres -Max product weight : 27.500 kg -Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 44.000, -Usable volume approx. 36,000 litres -Max product weight : 27.500 kg -Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

Bread cutter Wabäma Model: Allround Economy Plus 450.200 Max. number of slices: 100 pieces/min. max. bread dimensions: 450 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Machine mobile Cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Used machine cleaned Option: Maintenance contract Spare blade Service Package Many bread slicers are waiting for you in our warehouse!

Model TS 38 plus Circular Knife Machine Tabletop machine with base mobile Stainless steel version, Manual operation Disc thickness adjustable from 3 - 20 mm Dimensions: 950 x 660 x 1000 mm, WxDxH Bread dimensions max: 370 x 200 x 160 mm L x D x H DGUV V3 tested Connection 400V, 16A-CEE plug Used machine cleaned with 3 months warranty + spare parts service Option: Maintenance contract Service Package Instruction & Commissioning You can find more bread slicers in our exhibition!

Painting line Dimensions: painting line with conveyor and PLC. inlet and ionization: 2300mm long x 1500mm wide x 1200mm high paint booth: 2000mm long x 4300mm wide x 3200mm high evaporation zone: 1600mm long x 1600mm wide x 1400mm high Oven: 4200mm long x 1600mm wide x 2300mm high supply air/exhaust air pipes: construction height approx. 1200mm Find more here - /

Fully automated welding system for steel profiles Steel frame construction EWM type Phoenix Plus Electromotive NC drive integrated as robot axis Combination with welding process possible Flexible set-up via interchangeable inserts for IPE profiles from 80 - 160mm various head end variants possible Programming according to customer order Number of combinations according to customer requirements, e.g. : 5 welding programmes and 3 handling programmes ABB type TSC 2013 integrated in MAG package ABB type 7600 Feeding of the profiles: Accumulating roller chain conveyor with stopper and separating function Accumulating roller chain conveyor with stopper and separating function Roller conveyor - gravity principle Find more here - / Contact us at -

table length: 3000 mm table width: 1500 mm burner heads: Rofin Sinar DC 025 CO2 Control: Primach 20L total power requirement: 2500 W kW weight of the machine ca.: 12 t dimensions of the machine ca.: 12 x 6 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SNACH PL01 Type 15213 Print Card

Product number: 3089J Type: Platino 400 Serial number: E013928 Year of construction: 2012 Belt width: 400 mm Height setting: 2 - 51 mm Compressed air: 6-10 Bar, 0.7 l/min. Power: 3 x 400V, 50Hz, 3kW Dimensions: 2250 x 1100 x 1550 mm Weight: 600 kg

used bread slicer Schickart TS/38 plus, overhauled, 400 V, 0.75 kW

We are offering for sale a complete mobile screen plant with trailer : Trailer Type: ZAL 4PA Towing capacity: 47,000 kg Own weight: 8,600 kg Conveyor Belt Type: ML-Band Year of Manufacture: 2012 Screen Type: SEWU 2400 x 5000 Year of Manufacture: 2012 Find more here - / Contact us at -

CNC teach-in lathe, CMT URSUS 250 PLUS, 250 center height, 1500 between centers, Under power in our warehouse in Gussago BS - Italy

Danfoss Optyma™ PLUS condensing unit Type: OP-LPHC271NTP00E 114x3480 Compressor type: NTZ271A4LR1B Cooling capacity for R404A: 14.24 kW at -10°C/40°C, 10.97 kW at -25°C/40°C, 8.24 kW at -30°C/40°C Dimensions: 1600 x 540 x 1800 mm Weight: 325 kg Number of fans: 2 x 600 mm Stock: 1 piece Stock number: AG 178 Condition: used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

POMINI-FARREL / POMINI Laboratory Tangential Mixer PL1,6 Refer to code 1144-1014 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Bread cutter Wabäma Model: Allround Economy Plus 380.200 Max. number of slices: 100 pieces/min. max. bread dimensions: 380 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Machine mobile Cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Machine Option: Maintenance contract Spare blade Service Package

10 sets Picanol Air-Jet Weaving Looms, type OmniPlus – 190-4R YOC 2001, working width 190 cm, 4 weft colors Stäubli electron. dobby 2871 – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, Off-Loom Take-up, Double Whip Roller

Pilos ARG 300 plus E.S.A.F Double mitre band saw 45°-90°-45°-60° Inclusive: Frequency-controlled saw blade drive Belt tension indicator Electronic height adjustment of the saw frame

YOC 2001, working width 220 cm, 4 weft colors Stäubli electron. dobby 2871 – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

02 sets Picanol Air-Jet Weaving Looms, type OmniPlus Summum – 250-4R YOC 2015, working width 250 cm, 4 weft colors Stäubli electron. dobby 3220 / C4Can – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, double whip rollers, max warp beam flange dia. 1,000 mm, off-loom take-up

01 set Picanol Air-Jet Weaving Looms, type OmniPlus 800 – 220-4R YOC 2010, working width 220 cm, 4 weft colors Stäubli electron. dobby 2881 – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

Manufacturer: Unimac-Gherri Series: Tappatore Mod. Cap. 4-Plastic Year: 2010 Capacity: 10,000 b/hr Formats:current 850ml Specifications: - Voltage 400 V - Frequency 50/60 Hz - Nominal power: 4 kW

01 sets Picanol Air-Jet Weaving Loom, type OmniPlus 6-P - 340 YOC 2001, working width 340 cm, 6 weft colors Stäubli cam motion 1661 (of 2006) – 6 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

01 sets Picanol Air-Jet TERRY Weaving Loom, type OmniPlus SUMMUM- 340 YOC 2015, working width 340 cm, 6 weft colors Stäubli DOBBY STAUBLI – electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

Used Tubular UHT Plant – Alfa Laval M10-MFMC (6,500–13,000 l/h) Industrial tubular UHT processing plant designed for the thermal treatment of dairy products such as UHT milk and UHT cream. The Alfa Laval tubular UHT system provides reliable sterilization and continuous processing suitable for medium to high-capacity dairy production. General Information - Manufacturer: Alfa Laval - Sterile Tube Type: M10-MFMC - Year of Manufacture: 1989 - Condition: Good used condition, serviced Technical Specifications - Production Capacity: 6,500 – 13,000 l/h - Maximum Temperature: 137 °C - PLC System: SIEMENS S5 Recent Area of Use - The plant has recently been used for processing: - UHT milk - UHT cream Key Advantages - Reliable Alfa Laval tubular UHT technology - Suitable for continuous sterilization of dairy products - Flexible capacity range 6,500–13,000 l/h -  ...

New longitudinal veneer splicer Brand: CASATI Type: LINEA 1250 Technical details: Arm length 1.250 mm Veneer thickness 0,4 - 4 mm Min. veneer length 350 mm Min. veneer width 45 mm Glue for pre-gluing: Urea and PVA Glue for integrated gluing: Urea Feed speed 10 - 40 m/min. Heating area length 1.250 mm Total connected load 7,4 kW Power consumtion approx. 6 kw Compressed air consumption 5 Nl/min Compressed air pressure 6 - 8 bar This machine permits the longitudinal splicing of veneer sheets by applying glue on their edge. Immediately afterwards the veneer will be passing through a heated zone in order to activate the glue reaction: the glue will be hardening thus bonding the veneer sheets. The integrated glueing device allows the joining by one only process. Its also possible to bond pre-glued veneer sheets Option for an extra charge: Cooling device for the glue po ...

Gram PLUS-M 1400 CXG C 1G Refrigerator Double Door Bj.2018 - Door with lock - Self-closing with foot pedal to open the door - With 9 stainless steel grates - With dry cooling function - With defrost function - Temperature range: -5°C/+12°C - Gross capacity: 1400 liters - made of stainless steel - Refrigerant: R 290 - Cooling capacity at -10°C: 946 watts -Electrical. Connection: 910 watts, 230 V, 50 Hz - Noise level: 47.5 dB(A) Dimensions (WxDxH): 1390mm x 876mm x 2160mm Weight: 259 kg

ID3502 OMAG Plant for large-diameter pipes  / Großrohranlage OMAG large pipe system (all hydraulic) including molds, bases, support rings, various accessories and forklift with turning tongs OMAG large-diameter pipe system (all hydraulic) including moulds, lower sleeves, support rings, various accessories and forklift with turning pliers

This material filler is equipped with a 1 kW electric motor. It can suck 2 kinds of materials into its large tank. The mounted controller can also regulate the ratio of materials. There are several of them. Other fillers, dyes and other machines are also for sale. Please see my other ads.

x-travel: 2000 mm y-travel: 1500 mm z-travel: 1460 mm Control: Heidemhain type: TNC 426 CB mm Rotary table: 1350x1550 mm turning speeds: 10-3000 U/min spindle taper ISO: 50 Table load: 6000 kg T-slot - width: 28h7 mm T-slot - distance: 150 mm number of T-slots: 150 Feed: 10-3000 mm/min total power requirement: kW weight of the machine ca.: 24 t dimensions of the machine ca.: m B-axis 0.1-1.5 rpm Feed rate 3 rpm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours a ...

CNC drilling line Brand: Alberti Type: Syncro-Plus New machine Line with 5 controlled axes for vertical drilling from below. Options also allow grooving, milling and insertion of fittings. This Syncro line can be very well combined with the BMF series of Alberti. Autom. or manual loading with longitudinal workpiece transport Monolithic frame in welded strong steel Independent control of all axes with drilling cycle optimization 5 independet asex X1 Feed rate belt conveyor, 100 m/min X2 Control of reference stops, 55 m/min. X3 Workpiece transport control in relation to the workpiece width, 15 m/min. Y Drill head control, 45 m/min Z Machining depth control, 10 m/min Remark: Max. Workpiece dimensions: 3000x900x30mm Min. workpiece dimensions: 300x130x12mm Geometry of workpieces: Length > Width / Length = Width / Length < 20% Width. Machining head: 1 vertical  ...

Description Volumetric dispenser: ENGIN PLAST DPM 15/30/D Production: 1 - 15 Kg/h Hopper capacity: 25 L Auger diameter: 30 mm Pitch: 25 mm Power supply: 220 V Power: 0.25 Kw

Description Volumetric dispenser: ENGIN PLAST DPM 15/30/D Production: 1 - 15 Kg/h Hopper capacity: 25 L Auger diameter: 30 mm Pitch: 25 mm Power supply: 220 V Power: 0.18 Kw

Description Volumetric dispenser: ENGIN PLAST DPM 15/30 Production: 1 - 15 Kg/h Hopper capacity: 25 L Auger diameter: 30 mm Pitch: 25 mm Power supply: 220 V Power: 0.18 Kw

Description Volumetric dispenser: ENGIN PLAST DPM 15/30/D Production: 1 - 15 Kg/h Hopper capacity: 25 L Auger diameter: 30 mm Pitch: 25 mm Power supply: 220 V Power: 0.18 Kw

A complete Ernst Nagel brochure machine is sold Composed of Foldnak 8 SP Plus Online Trimmer Machine is used and fully functional. The machine can and should be viewed and tried out on site, as warranty or guarantee is excluded Price is net, VAT can be claimed.

Description Volumetric dispenser production: 1,0 - 15,0 Kg/h hopper capacity: 25 L auger diameter: 30 mm pitch 25 mm power supply: 230 V - 50 Hz power: 0.18 Kw

Description Volumetric dispenser production: 1,0 - 15,0 Kg/h hopper capacity: 25 L auger diameter: 30 mm pitch 25 mm power supply: 230 V - 50 Hz power: 0.18 Kw

Description volumetric dispenser production: 1-15 Kg/h hopper capacity: 25 Lt Auger : diameter 30 mm step 25 mm (1") 220V power supply Power 0.18 Kw

Description volumetric dispenser ENGIN PLAST DPM 15/30/D production: 1-15 KG / H hopper capacity: 25 LT auger diameter 30 mm pitch 25 mm power supply 220 V power: 0,18 Kw

Description volumetric dispenser ENGIN PLAST DPM 15/30/D production: 1-15 KG / H hopper capacity: 25 LT auger diameter 30 mm pitch 25 mm power supply 220 V power: 0,18 Kw

Description volumetric dispenser ENGIN PLAST DPM 15/30/D production: 1-15 KG / H hopper capacity: 25 LT auger diameter 30 mm pitch 25 mm power supply 220 V power: 0,18 Kw

Description volumetric dispenser ENGINE PLAST DPM 15/30 production: 1-15 KG / H hopper capacity: 25 LT auger diameter 30 mm pitch 25 mm power supply 220 V power: 0,18 Kw