piston used for sale

Suction: 580 l/min. Filling capacity: 470 l/min On / switch-off: 13/15 bar Heads / stages: 2/2 container volume: 90 l voltage: 400 V / 50 Hz engine output: 4 kW turning speeds: 915 U/min Sound power level: 95 dB dimensions: 1110 x 495 x 1000 mm weight: 111 kg - easy to move thanks to castors and long handle - mobile, V-belt driven piston compressor - Compressor for work up to 15 bar - equipped with filter pressure reducer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suction: 250 l/min. Filling capacity: 150 l/min On / switch-off: 10 bar container volume: 50 l turning speeds: 2.850 U/min Sound power level: 95 dB total power requirement: 1,8 kW dimensions: 910x470x780 mm weight: 38 kg - easy to move thanks to castors and long grill - mobile, V-belt driven piston compressor - Compressor for work up to 10 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sludge feed pump rotary piston pump PL100 Börger Product no.: RE-HU-2019-0701-PK32 System: rotary piston pump sludge feed pump Manufacturer: Börger Type: Pl 100 Speed: 50-700 rpm Flow rate: 2.5 to 38 m3/h Pressure: 12 bar

Suction: 660 l/min. Effective suction: 520 l/min On / switch-off: 8/10 bar container volume: 270 l voltage: 400 V / 50Hz power capacity: 4 kW turning speeds: 1025 U/min Sound power level: 69 dB dimensions: 960 x 740 x 1905 mm weight: 245 kg - Soundproof stationary piston compressor for work up to 10 bar - Smooth V-belt-driven 2-cylinder unit with two-stage compression - equipped as standard with all fittings and with rubber swinging elements - High performance refrigerated dryer with Super-Dry Technology and ECO shutdown - easily accessible condensate drain under the container The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: Motor: 1,6 kW Working pressure: 10 bar - Input with threaded supports DN 40 - Output with threaded supports DN 40 - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1100 mm Width: 560 mm Height: 1020 mm Weight: kg

Whisper compressor Planet Air double piston; as good as new condition; double pistons; 8 bar; Boiler 50 liters. Whisper compressor Planet Air double poppet; condition as new; double poppet; 8 bar; tank 50 liters.

For transfer of liquids, must, de-stalked grapes, yeast Technical data: Thread connection 2 x DN 65 Type: AM 112 NZ4/2 3 ~ Mo. No. 43604117 ?/ YY 380V 7,8/8,8 A 3,2/ 4,0 kW 1430/ 2870 1/ min 50 Hz VDE 0530/72 B/IP 44 Measurements and Weight: Total Height: 1000 mm Width: 700 mm Length: 1018 mm Weight approx. kg

NEW Part number: 0409 2826 Mahle Built Incl. GL acceptance Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

For transfer of liquids, must, de-stalked grapes, yeast Technical data: Connections: 2 x DN 50 1 x DN 65 Type: AM 132 SU 4/2 ?/ YY 380 V 11/13,5 A 5,2/6,5 kW Cos 0,82 / 0,88 / 1450/2910 U/min 50 Hz Measurements and Weight: Total Height: 1100 mm Width: 780 mm Length: 1200 mm Weight approx. kg

2 pcs piston MAK M43C recon Piston crown new with LR test certificate. Piston shirt crack-tested approx. 35,000 operating hours. MAK Part Number: 432670-400

A generally overhauled blower type GMb 039 is offered.

Caterpillar piston + segment ring, for engine 3412 Part number: 137L12A3

IPD Kit: shirt; piston; rings and rings Part number: 9Y-7212

A generally overhauled rotary piston blower brand is offered: RKR/Robuschi Type: K60R. See pictures. All our overhauled blowers are equipped with new bearings and density elements. If you ask, please call.

Gear pump Axial Piston Pump NEW/NEW Manufacturer: Rexroth Type: A11VO95DRG / 10R-NSD12K02 Further details and scope of delivery can be found in the Photographs.

A refurbished rotary piston blower brand is offered: Aerzener Maschinenfabrik Type: GMA 12.6 See pictures. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

MaK M25 pistons 16 pieces available KS type standard piston ring grooves in good condition Please contact info@fin-marine for more information

Multiplier piston for die-casting machine TF 1350, SC1400, 161104501, Italpress, used - overhauled Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The part was bought from a spare parts store of a company, has been overhauled by a specialised company and is in a very good condition and fully functional. - Suitable for Italpress TF1350 die-casting machine - Piston diameter 219mm, - Piston rod diameter 115mm, - Total length 470mm, - approx. 70 kg - Including the piston rings required for the piston

Shot piston to die casting machine OL, D225 mm x 510 mm, Oleopress, used - overhauled Special price! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new condition The part was bought from a spare parts store of a company, was overhauled by a specialist company and is in mint condition. - Piston bronze D225 x 190 mm incl. 5 piston rings - Piston rod D 113 mm - Total length 510 mm - Weight 60 kg

Key data: 61 , 75

Origin Engine 9.1 L: 90 kW mechanical power gas supply: natural, LNG, biogas or wood gas liquid-cooled exhaust manifolds single coil per cylinder ignition system crankcase venting motor coupled to generator Generator Linz: active power - 75 kVA turnovers - 1500 1/min

piston compressor ALUP Flow rate 665 L/min CW 5,5 Pressure 10 bar Container capacity 350 litres

Sulzer RT Flex 58T-B Piston crowns 5 pcs available In brand new unused condition New Piston ring sets also available Available in our istanbul stock Contact infofin-marine for more info

We have 8 pieces of W8L32 pistons in our stock in istanbul Slightly used in brand new condition with very low working hours All piston ring grooves standart size with measurement report available We also have covers , liners , conrods, fuel pumps and more ... please contact us at: info@fin-marine for more information

mak 601 piston Mahle std sized piston ring grooves 3 pcs available + 2 piston crowns available free of any cracks or welding from our istanbul stock

Gear pump Axial Piston Pump Overhauled by the manufacturer + conserved Manufacturer: Rexroth Type: A11VO60EP2G / 10R-NPC12N00H-S Further details and scope of delivery can be found in the Photographs. Grey and red lacquered available. Color may therefore differ from the images. for more information see pictures.

Wittig Compressor ROL 65 Pressure generator from 2000, complete (closed module) 1 available 357 m3/h, 8 bar. Manufacturer: Wittig GmbH Model: ROL 65 Type: piston compressor Serial Number: 920171/17 Flow rate [m3/h]: 357 Pressure outlet [bar]: 8 Power [kW]: 37 Year of construction: 2000 Running hours [h]: – Weight [kg]: 1.071 Dimensions LxWxH [cm]: 111x90x180

SPECIFICATIONS: Operating pressure: 12 bar Aerial view: 613 L/min Voltage: 380 volts

Demag Compressor 080IIH Pressure generator from 1986, complete (closed module) 1 available 505 m3/h, 6 bar. Manufacturer: Mannesmann Demag Model No.: 080IIH Type: piston compressor Serial Number: 920 501 / 78 Capacity flow rate [m3/h]: 505 Pressure outlet [bar]: 6 Power [kW]: 45,5 Year of construction: 1986 Running hours [h]: – Weight [kg]: 1.978 Dimensions LxWxH [cm]: 246x122x143

Brand Armatec Bystronic Type ZLD 250 Category Rigid Ventouse Piston Serial Number 203019/1-2 Construction year 2003 Weight 50kg Assets 250kg Air pressure 6 bars

Recon Part Number: 0406 2877 Built Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon without ring carrier 5 ring grooves Ring grooves Std 6.440.0.160.001.7 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon with ring bearer 4 ring grooves 6.440.0.160.021.4 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Increased performance Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

RECON Part Number: 1.60.6-26.60.01-06 Kolbenschmidt 1. Ring groove: 0.75mm ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Hydraulic pump Axial piston Variable displacement pump Manufacturer: Rexroth Model: A4VG90DA2DT2/32R - NZF02F001LH The pump is NEW and fully functional. see pictures for more details.

Pneumatic double piston dosing pump for pumping and mixing 2 media. 1 pneumatic cylinder with 2 pump heads. Required air pressure 8 bar. 1/2-inch connections with 4 stopcocks. Up to approx. 40 strokes per minute, or approx. 80 litres per minute / approx. 5 cbm per hour. On platform wagon ant with 2 swivel/brake castors and 2 fixed castors. Overall pump dimension: 6001300x1000mm, weight about 80kg.

Offer 24143 Specifications: - Standing version - Max. operating pressure 15 bar - Fully galvanized pressure vessel / boiler - Pressure vessel capacity 270 l - Suction volume 500 l/min - Delivery rate 470 l/min - Compressor speed 940 rpm - Cylinder stages 2 - 2 - Drive 400 V / 4.0 kW -Manometer - 3 swing feet - Kettle diameter approx. 600 mm - Space requirement approx. W 800 x H 1850 x D 800 mm - Weight approx. 240 kg

Kolbenpumpe und -kompressor für CTP Anlagen / Piston Pump and Compressor CTP Processor Thomas - Rietschle 2750BGHISS75 Baujahr / Year 2013 - Serial-No. 081300019158 für CTP Anlagen (Beispiel Agfa) / for CTP Processors (examplae Agfa) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Gear pump Axial Piston Pump Used, preserved. Good condition Manufacturer: Brueninghaus Type: A11VO95DRG/10R - NSD12K02 For more details and scope of delivery, please refer to the Photographs.

Hidraulik motor Axial piston motor Type: A2FE56/61W-VZL106 NEW and fully functional, from stock, see pictures for more details.

Motor power 5.5kW 400V 1240 rpm Boiler 2 pieces à 100 liters Maximum volume flow 850 litres Maximum pressure 10 bar Refrigeration Dryer AD54 No. 17M019986 Motor 0.37kW 230V max. 16 bar input Flow rate 900 litres/min Coolant R13a-0,21kg The compressor and dryer are mounted as a single unit on a steel pan, which can also be used as a pallet with Pallet truck functions (to be transported with pallet truck)

Radial piston flow divider JAHNS MT-GM1 Dimensions: 470 x 290 x 290 mm

Radial Piston Pump, Hydraulic Pump BOSCH 0514 300 421 ( 0514300421 ) Shaft diameter: 25 mm New ! Dimensions: 360 x 215 x 185 mm

Piston accumulator BOLENZ & SCHÄFER AK 10-220-18/0/0/1 ( AK10-220-18/0/0/1 ) Content: 10 l Pmax: 220 bar used, tested ! Dimensions 700 x 210 x 210 mm

Axial piston motor, hydraulic motor ORSTA 314 685 ( 314685 ) 200-16-12 TGL 10865 P max 200 bar n max 1500 rpm shaft Ø 35 mm flange Ø 280 mm New !' Dimensions: 470 x 300 x 280 mm

Piston Angled Seat Valve SAMSON 3353 PN40 DN56 stainless steel ! New ! Dimensions: 340 x 200 x 140 mm

Piston metering pump, chemical pump PROMINENT Type: META HK 20-12.5 S Dosing capacity: 6.1 l/h Motor: 0.37 kW 216 bar 230 / 400 V with stroke length adjustment Dimensions: 430 x 400 x 150 mm

"Lower piston press => table/stroke from bottom to top". Technical data Manufacturer: Hans Schoen Year of construction: 1997 pressing force: 500t table clamping area: 640mm x 800mm mounting height: 380mm stroke: 150mm Find more here - /

Piston Metering Pump, Chemical Pump DOSAPRO MILTON ROY POMPE D Type: P0.83 9037 90.02.0688.07 Dosing capacity: 17 l/h motor: 0.09 kW 10 bar 220 / 380 V Dimensions: 370 x 140 x 310 mm

Volume flow: 650l/min, motor power: 5.5kW, tank volume: 350dm³, operating pressure: 10bar. On-site inspection is possible.