pipes and forged used for sale

600x760mm potty washer with drain pump; rinse and wash dispensers Brand: Hobart Model: UX-A-SEF Year: 2017 Power supply: Three-phase 3P+N+T (380-400V - 50Hz) Electrical power: 15.6 kW Capacity: 1 compartment 600x760mm Dimensions (W x D x H): 780 x 945 x 2184 mm Weight: 212 kg Aesthetic appearance: Marked Used equipment sold as is, not refurbished and untested. Vesto reference: V3475 Auction-ID: A1-50906-110

USED WEEREN DH 20II GA MACHINE (STRAIGHTENING, CENTERING, EXTERNAL TURNING AND CHAMFERING) FOR SHAFT AND TUBE END MACHINING Year : 2008 Capacity: max. diameter: 36 mm Machining length: 35 mm Workpiece length: minimum: 150 mm - max: 1150mm Equipped with 1 SIEMENS PLC 2 GUHRING machining heads Dimensions and weight Machine: 3900x1550xH1800mm - Container: 1550x500xH1000mm - 2 pallets weight 6500 kg Auction-ID: A1-50950-80

Microstrip light projector, for topography measurement Part of the offer is only what is written on the blue car, but WITHOUT the car itself: - MicroCAD measuring device with complete cable set - PC with accessories and user supplies - Granite slab - Calibration body set - Cold light source with light guide - Detailed operating instructions Technical Highlights & Features • Precise cutting edge measurement: Specialized optics for exact determination of radii (fillets) and wear. • Automatic determination of cutting edge radii up to approx. 5 μm. • Statistical validation: Determination of the average radius from several hundred sections, including a pass/bad rating. • High-resolution sensor technology: Area-based measurement with up to 5 million measuring points per scan. • Vertical resolution from 0.1 μm, lateral resolution from 0.4 μm. • Speed: Full ...

Battery washer with drain pump; dosing unit and flush booster Brand: Winterhalter Model: GS640 Serial No.: 115060021 Power supply: Three-phase 3P+N+T (380-400V - 50Hz) Electrical power: 8.4 kW Capacity: 1 compartment 608x672mm Dimensions (W x D x H): 750 x 870 x 1617 mm Weight: 198 kg Aesthetic aspect: Very satisfactory Used equipment sold as is, not refurbished and untested. Vesto reference: V5461 Auction-ID: A1-50906-32

BUCHI gas steam vacuum cleaner type B 414 Sold in a set of 2 Auction-ID: A1-50994-79

SOLD FOR EACH Pilot rotary evaporator Auction-ID: A1-50994-96

Pot washer with integrated washing and rinsing dispenser, drain pump and rinse booster Brand: Thirode Model: OREANE LB PRO 2 Year: 2011 Serial number: 4215068 Power supply: Three-phase 3P+N+T (380-400V - 50Hz) Electrical power: 7.5 kW Capacity: 1 compartment 550x610 mm Dimensions (W x D x H): 719 x 782 x 1730 mm Weight: 148 kg Aesthetic aspect: Very satisfactory Used equipment sold as is, not refurbished and untested. Vesto reference: V4816 Auction-ID: A1-50906-112

Thermo Scientific™ CryoPlus™ systems provide the perfect combination of liquid nitrogen storage reliability and microprocessor technology. Storage capacities of up to 39,000 2.0 mL vials (8,450 to 65,910 Thermo Scientific™ Nunc™ Cryobank™ vials) make the most of your laboratory storage space. Elec: 200/230 V 50/60Hz External dimensions (mm): 970x730 H 1060 Inner Diameter (mm): 600 Interior Height (mm): 860 Last Used: 2020 Auction-ID: A1-50994-90

Vibrating Bowl and Dispensing Conveyor Manufacturer: RNA Model: EGS 90 Year: 1999 Serial Number: 99R28653 Characteristics: cap or capsule dispensing Ø 34 x height 9 mm Compliance: CE Overall dimensions: 1600 x 700 x 1200 (W x D x H in mm) Weight: 100 Kg Auction-ID: A1-51057-26

SIEMENS RapidLab 1245 Electrolyte and Blood Gas Analyzer for Parts; ; Model: RapidLab 1245; For parts, does not work; ; Internal reference: FA-1512; Auction-ID: A1-50994-1181

Battery washer with heat pump, drain pump and rinse dosing unit Brand: Comenda Model: GE 605 RCD Year: 2013 Power supply: Three-phase 3P+N+T (380-400V - 50Hz) Capacity: 1 basket 650x700mm Dimensions (W x D x H): 830 x 900 x 2480 mm Weight: 200 kg Aesthetic appearance: Marked Used equipment sold as is, not refurbished and untested. Vesto reference: V2175 Auction-ID: A1-50906-177

Polar Mohr RA-2 Paper Jogger - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Polar Mohr RA-2 Paper Jogger Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Polar Mohr RA-2 Paper Jogger Price: 10500 EUR Download PDF Polar Mohr RA-2 Paper Jogger The machine is 100% functional and in perfect condition. This is the latest model from the German manufacturer, currently in production. Technical specifications: Max. format: B2+ Stack height: 150 mm Weight: 450 kg Power supply: 400 V Air-expelling roller Air table Jogging capability (left/right) Adjustable tilt angle Adj ...

Polar Mohr RA-4 Jogger with Air-Removal Roller - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Polar Mohr RA-4 Jogger with Air-Removal Roller Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Polar Mohr RA-4 Jogger with Air-Removal Roller Price: 14500 EUR Download PDF Polar Mohr RA-4 Jogger with Air-Removal Roller Machine in very good condition, ready for operation. This is the latest design from the German manufacturer. Technical specifications: Max. format: B1+ Pile height: 150 mm Weight: 550 kg Power supply: 400 V Air-removal roller with an additional reinfor ...

Polar Mohr LW 1000-4 paper stack lift - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Polar Mohr LW 1000-4 paper stack lift Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Polar Mohr LW 1000-4 paper stack lift Price: 4500 EUR Download PDF Polar Mohr LW 1000-4 paper stack lift The unit is in excellent technical and visual condition. This is a currently manufactured model. Hydraulic drive. Power supply: 380V. Features an automatic lifting cycle controlled by a photocell, as well as a manual mode; high-speed operation. Load capacity: 1000 kg. Pallet dimensions: 1 ...

rate of flow: 250 l/min accumulator pressure: max. 8 bar range L-W-H: ca. mm Shipping weight: ca. 600 kg Packing: ca. m Osmosis System Complete water treatment system with dual softening, two IBC tanks, and control system, still installed, documentation available, viewing possible The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sanding line with working width 1300 mm, constant working height. Line consisting of: - Undersander 2 sanding units 1 x Combi unit with contact roller 60° shore and segmented shoe, motor 22 kW 1 x Segmented shoe, motor 15 kW 1 x Brush Vacuum workpiece suction, 7.5 kW motor -Intermediate transport: 4200 x 1300 mm -Top sander 2 sanding units 1 x Combi unit with 70° shore contact roller and segmented shoe, 22 kW motor 1 x Segmented shoe, motor 15 kW, 1 x Brush Vacuum workpiece suction, motor 7.5 kW Feed speed: infinitely variable Table spring-loaded or fixed adjustable

Top/bottom calibrating line: Bottom sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction Top sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction

1) sander top VEGA 311 MRL Sanding width 1100 mm. Working thickness 3 to 160 mm working height 950 mm Sanding belt dimensions 1120 x 2620 mm. Equipment: 1) cutterblock diameter 180 mm 22 kW 47m/s 2) rubber contact roller diameter 220 mm 22 kW 18m/s 3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off 4) Finishing brush unit at output 0.75 kW diameter 150 mm feed speed adjustable 2.5-13 m/min 3 kW pneumatic sanding belt tension motor height adjustment 0.75 kW extraction rate: 11800 m²/h 2) bottom sanderVEGA U 311 MRF Sanding width 1100 mm. Working thickness 3 to 160 mm working height 920 mm Sanding belt dimensions 1120 x 2620 mm. Equipment: 1) cutterblock diameter 180 mm 22 kW 47m/s 2) rubber contact roller diameter 220 mm 22 kW 18m/s 3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off 4) Finishing brush unit at output 0.75 kW diameter 150 mm feed speed ...

ROLLER COATER with SINGLE SPREADING-COATING ROLLER - Max working width mm 1300 - Lenght of the machine mm 1000 approx - Thickness of the panels (working height): mm 0 - 100 - Adjustable feeding speed: m/min 4 - 23 - Separate (from the machine s body) electric and command cabinet - Total installed power KW 2.4 - Equipped with: - 1°) Dosing unit (Chromium plated Doctor roller diam. mm 174), KW 0.37 - 2°) Coating unit (Rubbered spreading roller diam. mm 248) KW 0.75, with a rubbered bottom roller, counter-placed to the top one

Workpiece thickness: 8 - 50 mm Edge thickness: Coil edges 0.4 - 3 mm Feed speed 10 m/min Equipment: manual height adjustment. Joint milling unit, 2 motors Panel edge heating Gluing area Pressure zone 1 driven and 2 non-driven rollers End trims, 2 x 0,8 kW motors, straight and chamfer 15° Top and bottom trimming Profile scraping unit for PVC edging Glue scrapers

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15° Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Consisting of: various charging stations, charging stations semi-finished products, parts and charging cables. On approximately 8 pallets. Auction-ID: A1-50244-3

Consisting of various items including: monitors, single-sided and a double-sided self-service kiosk, cables and more. Auction-ID: A1-50667-90

Serial Number: 2000 Auction-ID: A1-50244-10

batteries: 5x Pylontech FH48074 H1 3.55 kWh BMS: Pylontech FC0500-40S-B management solar panels: 20x Longi LR5-54HPB-410M (410 wp) Full Black inverter: Goodwe Hybrid Inverter 8K (3 phase) total power: 8,200 Wp power: 410 Wp per solar panel Condition: New Auction-ID: A1-46381-416

Dimensions of pulling equipment 130x110x260 cm, meter cupboard 85x85x190 cm Auction-ID: A1-50656-147

Maus automatic grinding machine, type: SAM 1200 , year of construction: 2008 v.v. 3-sided measuring device and accessories Auction-ID: A1-50656-25

approximately 1000 allen bolts and 1000 stainless steel body rings Auction-ID: A1-46381-453

Maus automatic grinding machine, type: SAM 1200 , year of construction: 2008 v.v. 3-sided measuring device and accessories Auction-ID: A1-50656-26

Including surveying wheel, Carbon tripod, clinker puller, bump bar and pestle, on 1x pallet, without the pallet Auction-ID: A1-50903-17

- Includes: - Table with guide with total dimensions 2520 x 480 x 1100 mm. - Trolley: dimensions 800 x 650 x 1720 mm, arm length 370 mm, 4 swivel castors. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-610

Pallet not included. Decommissioned KNF Neuberger pump VDE 0530 LaboTech Retschmix TM01 Vortex Mixer Stnart Platform Rocker STR6 Laboratory Mixer Auction-ID: A1-50846-182

In and including lockable Kruizinga galvanized stacking bin Auction-ID: A1-50903-54

In and including lockable Kruizinga galvanized stacking bin Auction-ID: A1-50903-55

approximately 2000 Allen bolts and 2000 stainless steel body rings Auction-ID: A1-46381-454

KDF-2239NV0N30 Valve : 2.8 mm 16 bar 100°C Auction-ID: A1-50846-241

Serial Number: 3161 Auction-ID: A1-50244-13

Two steel storage silos with hopper floor on steel support structure, marked L71 and L72. Inscriptions: \"BENTONITE\" and \"ZILVERZAND\". Content per silo 60m3, content partly present. Version: vertical silos with hopper bottom. Construction: steel frame/support structure. Access: ladder(s) and landing/walking platform. Auction-ID: A1-50656-39

Various tables in various sizes: - 1x 2000x1750x1000 mm - 2x 2500x1250x1000 mm - 1x 2000x1250x1000 mm Cradle width 1000 mm, height from 700 to 900 mm Auction-ID: A1-50656-158

Consisting of: development tools, interfaces, modules, printed circuit boards, displays, sensors, cables, connectors and various electronic components. On 1 pallet. Auction-ID: A1-50244-105

Paint shop in line arrangement with several grey machine/cabinet modules, exhaust ducts and a freestanding control cabinet, various fan/motor units on pedestal with hanging rail system. Auction-ID: A1-50656-36

Control cabinet with contents consisting of: - ABB switches - PHOENIX QUINT POWER Auction-ID: A1-50846-204

Consisting of 2 desks, 1 office chair, cantilever chair, various cash register monitors, 4 desktops without hard disk, 2 Eaton UPSes, age verification scanner, receipt printers, 2 Datalogic scanners. Auction-ID: A1-50667-117

Moulding sand machines with silo storage for sand consisting of bunkers on steel structures with piping and various conveyor belts. Auction-ID: A1-50656-20

25 meters red + 25 meters black solar cable 4mm2 + Dc Plugs for solar panels 4 x male plug and 4 x female plug Condition: Unused Auction-ID: A1-46381-436

Various tools including sting grinders, hand grinders both pneumatic and high frequency Auction-ID: A1-50656-201